The cross-entropy method and its application to minimize the ripple of magnetic levitation forces of a maglev system

This paper explores firstly the potential of a new evolutionary method - the Cross-Entropy (CE) method in solving continuous inverse electromagnetic problems. For this purpose, an adaptive updating formula for the smoothing parameter, some mutation operation, and a new termination criterion are proposed. The proposed CE based metaheuristics is applied to reduce the ripple of the magnetic levitation forces of a prototype Maglev system. The numerical results have shown that the ripple of the magnetic levitation forces of the prototype system is reduced significantly after the design optimization using the proposed algorithm.

Methodology for the comparison of military expenditures

Includes bibliography

The influence of handrim design on the contact forces on hands'surface: a preliminary study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The effect of pulsed jet lavage in vertebroplasty on injection forces of polymethylmethacrylate bone cement, material distribution, and potential fat embolism: a cadaver study

STUDY DESIGN: In vitro testing of vertebroplasty techniques including pulsed jet-lavage for fat and marrow removal in human cadaveric lumbar and thoracic vertebrae. OBJECTIVE: To develop jet-lavage techniques for vertebroplasty and investigate their effect on cement distribution, injection forces, and fat embolism. SUMMARY OF BACKGROUND DATA: The main complications of cement vertebroplasty are cement leakage and pulmonary fat embolism, which can have fatal consequences and are difficult to prevent reliably by current vertebroplasty techniques. METHODS: Twenty-four vertebrae (Th8-L04) from 5 osteoporotic cadaver spines were grouped in triplets depending on bone mineral density (BMD). Before polymethylmethacrylate (PMMA) vertebroplasty, a pulsatile jet-lavage for removal of intertrabecular fat and bone marrow was performed in 2 groups with 8 specimens each, performing radial and axial irrigation from the biopsy needles. One hundred mL of Ringer solution were injected through 1 pedicle and regained by low vacuum via the contralateral pedicle. Eight control vertebrae were not irrigated. All specimens underwent standardized PMMA cement augmentation injecting 20% of the vertebral volume. Injection forces, cement distribution, and extravasations were quantified. RESULTS: All irrigation solution could be retrieved with the vacuum applied. A Kruskal-Wallis test revealed significantly higher injection forces of the control group as compared with the irrigated groups (P = 0.021). Dilatation of the syringe at forces above 300 N occurred in 75% of the untreated compared with 12.5% of the lavaged specimens. CT distribution analysis showed more homogenous cement distribution of the cement and significantly less extravasation in the irrigated specimens. CONCLUSION: The developed lavage technique for vertebroplasty showed to be feasible and reproducible. The reduction of injection forces would allow the use of more viscous PMMA cement lowering the risk for cement embolization and results in a safer procedure. The wash-out of bone marrow and the possible reduction of pulmonary fat embolism have to be verified with in vivo models.

'Työmies?': Finnish Canadians in the Economy: A Historiographic Overview

Finnish immigrants are often seen as labor activists, even “radicals,” and key players in the “left-right” political divide, thus indicating a real presence on the “other” side of the economy. How did successive historians build these now-standard views? This paper takes a sweeping tour of writing on Finnish Canadian workers, tracing the evolution of these assessments. Archives and histories provided basic notions of “the” Finnish Canadian and were key sources as professional scholars – many Finns themselves – began their work. In Canada, new academics – Varpu Lindstrom most prominently – wrote about women, arts and culture, intellectual activity, and the impact of Finns as “exceptional” historical actors in socioeconomic terms. But, have historians of Finnish Canadian workers built a convincing case? Examination of Finnish Canadian “economic” historiography offers insights into the Finnish Canadian “story,” and the nature of generalization in immigrant and ethnic history.

Exculpating victims and the reversal of hindsight bias

This experiment examines the role of the hindsight bias and of motivational forces such as the motive to believe in a just world as possible causes of the derogation of victims effect in the context of rape. The hindsight bias is the tendency of people to falsely believe that they would have predicted the outcome of an event once the outcome is known. Participants read descriptions of an interaction between a man and a woman that ended with one of four possible outcomes: The woman was raped with very severe consequences for her future life vs. rape with only minor consequences for her future life vs. no rape (assailant was forced to retreat by the strong defense of the victim) vs. no outcome information. To test motivational predictions the hindsight bias and the derogation effect were analyzed as a consequence of the sex of participants, the seriousness of the consequences of the rape, the belief in a just world and the acceptance of rape myths. Results supported the assumption that derogation effects are at least partly driven by hindsight bias and that motivational processes work via the hindsight bias. However, in this study we did not find a classical hindsight bias but a reversed hindsight bias: Especially female participants in the severe consequences of rape condition and those participants who did not accept rape myths rated the likelihood of rape in the rape outcome condition as smaller than participants in the no outcome information control group. They also derogated the victim less than participants in the no information control group. These effects were interpreted in terms of self-serving or in-group serving functions of the hindsight bias. Finally no support was found for the assumption that derogation effects are driven by the motive to believe in a just world.

Hydrodynamic forces on heave plates for offshore systems oscillating close to the seabed or the free surface

La energía eólica marina es uno de los recursos energéticos con mayor proyección pudiendo contribuir a reducir el consumo de combustibles fósiles y a cubrir la demanda de energía en todo el mundo. El concepto de aerogenerador marino está basado en estructuras fijas como jackets o en plataformas flotantes, ya sea una semisumergible o una TLP. Se espera que la energía eólica offshore juegue un papel importante en el perfil de producción energética de los próximos años; por tanto, las turbinas eólicas deben hacerse más fables y rentables para ser competitivas frente a otras fuentes de energía. Las estructuras flotantes pueden experimentar movimientos resonantes en estados de la mar con largos períodos de oleaje. Estos movimientos disminuyen su operatividad y pueden causar daños en los componentes eléctricos de las turbinas y en las palas, también en los risers y moorings. La respuesta de la componente vertical del movimiento puede reducirse mediante diferentes actuaciones: (1) aumentando la amortiguación del sistema, (2) manteniendo el período del movimiento vertical fuera del rango de la energía de la ola, y (3) reduciendo las fuerzas de excitación verticales. Un ejemplo típico para llevar a cabo esta reducción son las "Heave Plates". Las heave plates son placas que se utilizan en la industria offshore debido a sus características hidrodinámicas, ya que aumentan la masa añadida y la amortiguación del sistema. En un análisis hidrodinámico convencional, se considera una estructura sometida a un oleaje con determinadas características y se evalúan las cargas lineales usando la teoría potencial. El amortiguamiento viscoso, que juega un papel crucial en la respuesta en resonancia del sistema, es un dato de entrada para el análisis. La tesis se centra principalmente en la predicción del amortiguamiento viscoso y de la masa añadida de las heave plates usadas en las turbinas eólicas flotantes. En los cálculos, las fuerzas hidrodinámicas se han obtenido con el f n de estudiar cómo los coeficientes hidrodinámicos de masa añadida5 y amortiguamiento varían con el número de KC, que caracteriza la amplitud del movimiento respecto al diámetro del disco. Por otra parte, se ha investigado la influencia de la distancia media de la ‘heave plate’ a la superficie libre o al fondo del mar, sobre los coeficientes hidrodinámicos. En este proceso, un nuevo modelo que describe el trabajo realizado por la amortiguación en función de la enstrofía, es descrito en el presente documento. Este nuevo enfoque es capaz de proporcionar una correlación directa entre el desprendimiento local de vorticidad y la fuerza de amortiguación global. El análisis también incluye el estudio de los efectos de la geometría de la heave plate, y examina la sensibilidad de los coeficientes hidrodinámicos al incluir porosidad en ésta. Un diseño novedoso de una heave plate, basado en la teoría fractal, también fue analizado experimentalmente y comparado con datos experimentales obtenidos por otros autores. Para la resolución de las ecuaciones de Navier Stokes se ha usado un solver basado en el método de volúmenes finitos. El solver usa las librerías de OpenFOAM (Open source Field Operation And Manipulation), para resolver un problema multifásico e incompresible, usando la técnica VOF (volume of fluid) que permite capturar el movimiento de la superficie libre. Los resultados numéricos han sido comparados con resultados experimentales llevados a cabo en el Canal del Ensayos Hidrodinámicos (CEHINAV) de la Universidad Politécnica de Madrid y en el Canal de Experiencias Hidrodinámicas (CEHIPAR) en Madrid, al igual que con otros experimentos realizados en la Escuela de Ingeniería Mecánica de la Universidad de Western Australia. Los principales resultados se presentan a continuación: 1. Para pequeños valores de KC, los coeficientes hidrodinámicos de masa añadida y amortiguamiento incrementan su valor a medida que el disco se aproxima al fondo marino. Para los casos cuando el disco oscila cerca de la superficie libre, la dependencia de los coeficientes hidrodinámicos es más fuerte por la influencia del movimiento de la superficie libre. 2. Los casos analizados muestran la existencia de un valor crítico de KC, donde la tendencia de los coeficientes hidrodinámicos se ve alterada. Dicho valor crítico depende de la distancia al fondo marino o a la superficie libre. 3. El comportamiento físico del flujo, para valores de KC cercanos a su valor crítico ha sido estudiado mediante el análisis del campo de vorticidad. 4. Introducir porosidad al disco, reduce la masa añadida para los valores de KC estudiados, pero se ha encontrado que la porosidad incrementa el valor del coeficiente de amortiguamiento cuando se incrementa la amplitud del movimiento, logrando un máximo de damping para un disco con 10% de porosidad. 5. Los resultados numéricos y experimentales para los discos con faldón, muestran que usar este tipo de geometrías incrementa la masa añadida cuando se compara con el disco sólido, pero reduce considerablemente el coeficiente de amortiguamiento. 6. Un diseño novedoso de heave plate basado en la teoría fractal ha sido experimentalmente estudiado a diferentes calados y comparado con datos experimentales obtenidos por otro autores. Los resultados muestran un comportamiento incierto de los coeficientes y por tanto este diseño debería ser estudiado más a fondo. ABSTRACT Offshore wind energy is one of the promising resources which can reduce the fossil fuel energy consumption and cover worldwide energy demands. Offshore wind turbine concepts are based on either a fixed structure as a jacket or a floating offshore platform like a semisubmersible, spar or tension leg platform. Floating offshore wind turbines have the potential to be an important part of the energy production profile in the coming years. In order to accomplish this wind integration, these wind turbines need to be made more reliable and cost efficient to be competitive with other sources of energy. Floating offshore artifacts, such oil rings and wind turbines, may experience resonant heave motions in sea states with long peak periods. These heave resonances may increase the system downtime and cause damage on the system components and as well as on risers and mooring systems. The heave resonant response may be reduced by different means: (1) increasing the damping of the system, (2) keeping the natural heave period outside the range of the wave energy, and (3) reducing the heave excitation forces. A typical example to accomplish this reduction are “Heave Plates”. Heave plates are used in the offshore industry due to their hydrodynamic characteristics, i.e., increased added mass and damping. Conventional offshore hydrodynamic analysis considers a structure in waves, and evaluates the linear and nonlinear loads using potential theory. Viscous damping, which is expected to play a crucial role in the resonant response, is an empirical input to the analysis, and is not explicitly calculated. The present research has been mainly focused on the prediction of viscous damping and added mass of floating offshore wind turbine heave plates. In the calculations, the hydrodynamic forces have been measured in order to compute how the hydrodynamic coefficients of added mass1 and damping vary with the KC number, which characterises the amplitude of heave motion relative to the diameter of the disc. In addition, the influence on the hydrodynamic coefficients when the heave plate is oscillating close to the free surface or the seabed has been investigated. In this process, a new model describing the work done by damping in terms of the flow enstrophy, is described herein. This new approach is able to provide a direct correlation between the local vortex shedding processes and the global damping force. The analysis also includes the study of different edges geometry, and examines the sensitivity of the damping and added mass coefficients to the porosity of the plate. A novel porous heave plate based on fractal theory has also been proposed, tested experimentally and compared with experimental data obtained by other authors for plates with similar porosity. A numerical solver of Navier Stokes equations, based on the finite volume technique has been applied. It uses the open-source libraries of OpenFOAM (Open source Field Operation And Manipulation), to solve 2 incompressible, isothermal immiscible fluids using a VOF (volume of fluid) phase-fraction based interface capturing approach, with optional mesh motion and mesh topology changes including adaptive re-meshing. Numerical results have been compared with experiments conducted at Technical University of Madrid (CEHINAV) and CEHIPAR model basins in Madrid and with others performed at School of Mechanical Engineering in The University of Western Australia. A brief summary of main results are presented below: 1. At low KC numbers, a systematic increase in added mass and damping, corresponding to an increase in the seabed proximity, is observed. Specifically, for the cases when the heave plate is oscillating closer to the free surface, the dependence of the hydrodynamic coefficients is strongly influenced by the free surface. 2. As seen in experiments, a critical KC, where the linear trend of the hydrodynamic coefficients with KC is disrupted and that depends on the seabed or free surface distance, has been found. 3. The physical behavior of the flow around the critical KC has been explained through an analysis of the flow vorticity field. 4. The porosity of the heave plates reduces the added mass for the studied porosity at all KC numbers, but the porous heave plates are found to increase the damping coefficient with increasing amplitude of oscillation, achieving a maximum damping coefficient for the heave plate with 10% porosity in the entire KC range. 5. Another concept taken into account in this work has been the heave plates with flaps. Numerical and experimental results show that using discs with flaps will increase added mass when compared to the plain plate but may also significantly reduce damping. 6. A novel heave plate design based on fractal theory has tested experimentally for different submergences and compared with experimental data obtained by other authors for porous plates. Results show an unclear behavior in the coefficients and should be studied further. Future work is necessary in order to address a series of open questions focusing on 3D effects, optimization of the heave plates shapes, etc.

Pulling a single chromatin fiber reveals the forces that maintain its higher-order structure

Single chicken erythrocyte chromatin fibers were stretched and released at room temperature with force-measuring laser tweezers. In low ionic strength, the stretch-release curves reveal a process of continuous deformation with little or no internucleosomal attraction. A persistence length of 30 nm and a stretch modulus of ≈5 pN is determined for the fibers. At forces of 20 pN and higher, the fibers are modified irreversibly, probably through the mechanical removal of the histone cores from native chromatin. In 40–150 mM NaCl, a distinctive condensation-decondensation transition appears between 5 and 6 pN, corresponding to an internucleosomal attraction energy of ≈2.0 kcal/mol per nucleosome. Thus, in physiological ionic strength the fibers possess a dynamic structure in which the fiber locally interconverting between “open” and “closed” states because of thermal fluctuations.

Use of Arabidopsis thaliana defense-related mutants to dissect the plant response to pathogens.

The plant defense response to microbial pathogens had been studied primarily by using biochemical and physiological techniques. Recently, several laboratories have developed a variety of pathosystems utilizing Arabidopsis thaliana as a model host so that genetic analysis could also be used to study plant defense responses. Utilizing a pathosystem that involves the infection of Arabidopsis with pathogenic pseudomonads, we have cloned the Arabidopsis disease-resistance gene RPS2, which corresponds to the avirulence gene avrRpt2 in a gene-for-gene relationship. RPS2 encodes a 105-kDa protein containing a leucine zipper, a nucleotide binding site, and 14 imperfect leucine-rich repeats. The RPS2 protein is remarkably similar to the product of the tobacco N gene, which confers resistance to tobacco mosaic virus. We have also isolated a series of Arabidopsis mutants that synthesize decreased levels of an Arabidopsis phytoalexin called camalexin. Analysis of these mutants indicated that camalexin does not play a significant role in limiting growth of avirulent Pseudomonas syringae strains during the hypersensitive defense response but that it may play a role in limiting the growth of virulent strains. More generally, we have shown that we can utilize Arabidopsis to systematically dissect the defense response by isolation and characterization of appropriate defense-related mutants.

NATO’s presence in the Baltic states – reassurance of allies or deterrence for Russia? OSW COMMENTARY Number 169, 29.04.2015 2015-04-29

In late March and early April, the US Air Forces in Europe (USAFE) held an exercise in Estonia, during which US F-16s destroyed ground targets in an Estonian firing range. Around the same time the Americans held a drill with the Swedish and Finnish Air Forces over the Baltic Sea. The United States has been playing a leading role in the process of strengthening NATO’s presence in the Baltic states. As far as the Western European allies are concerned, Germany will follow in the footsteps of Denmark and the United Kingdom, both of which made significant military contributions to the strengthening of the allied presence in 2014, and will deploy the largest number of troops in 2015. Non-aligned Sweden and Finland, key for the performance of NATO operations in the Baltic states, have been emphasising their military and political readiness to co-operate with NATO in the event of potential crises or conflicts. Comparing NATO ‘s military presence in the Baltic states before and after the outbreak of the Russian intervention in Ukraine, it is clear that NATO has stepped up its engagement considerably. However, its scope is still relatively small, given the much larger military potential and mobilisation capacity of Russia. Moreover, the message sent by NATO’s actions may be diminished by the political, military and financial constraints faced by the allies and Sweden and Finland. It seems that the greatest risk to the military security of the Baltic states currently appears to be the possibility that Russia could wrongly assess the reliability of NATO’s security guarantees.

National defense into the 21st century : defining the issues /

"A special report from the Strategic Studies Institute."

Mollusca Non-Grata: The influence of top-down control and residence time on the abundance, distribution, and behavior of non-native marine snails in Washington State

Thesis (Ph.D.)--University of Washington, 2016-06

Defense Expenditure: Central America and The Dominican Republic

It is often speculated that the high allocation of funds to retirement pension systems has influenced the capacity of Central American and Dominican Republic military to modernize. Yet, the comparative study of the allocation of pension and social funds in these particular countries suggest that there is not direct linkage between the poor funding of military modernization plans and the allocation of funds to military pension systems. The research conducted on this subject shows the following results: 1. The Dominican Republic is the only country that has embarked on a considerable procurement of modern equipment and still reports the largest proportion of social expenditures. 2. El Salvador’s defense budget allocates minimal funding to Social Welfare Institute, which as alternative sources of funding. In 2009, El Salvador increased 15 percent funding to the military to respond to increased role in domestic security issues. 3. The Guatemalan defense expenditure on social programs is fairly low, but it has grown during the past six years due to processes of demobilization. However, the Military Social Welfare Institute is administered by a decentralized institution funded directly by the Ministry of Finance. If it were to be considered as a part of the defense budget, its social expenses would account for almost 16% of it. 4. The Honduran Defense Budget has faced a considerable enlargement during the past four years, with social spending expenses taken precedence over modernization efforts. 2 5. The Nicaraguan system of military pensions is administered by a decentralized entity (IPSM) through a system of salary deductions. Information on the funding of this entity is inconclusive. The Nicaraguan Defense spending on social services has reported a drastic 90% drop since the year 2007.

Innovating from the War Economy: Formal, Informal, and Illicit Economic Activities of the Military in Colombia

Over the last decade, the Colombian military has successfully rolled back insurgent groups, cleared and secured conflict zones, and enabled the extraction of oil and other key commodity exports. As a result, official policies of both the Uribe and Santos governments have promoted the armed forces to participate to an unprecedented extent in economic activities intended to consolidate the gains of the 2000s. These include formal involvement in the economy, streamlined in a consortium of military enterprises and social foundations that are intended to put the Colombian defense sector “on the map” nationally and internationally, and informal involvement expanded mainly through new civic action development projects intended to consolidate the security gains of the 2000s. However, failure to roll back paramilitary groups other than through the voluntary amnesty program of 2005 has facilitated the persistence of illicit collusion by military forces with reconstituted “neoparamilitary” drug trafficking groups. It is therefore crucially important to enhance oversight mechanisms and create substantial penalties for collusion with illegal armed groups. This is particularly important if Colombia intends to continue its new practice of exporting its security model to other countries in the region. The Santos government has initiated several promising reforms to enhance state capacity, institutional transparence, and accountability of public officials to the rule of law, which are crucial to locking in security gains and revitalizing democratic politics. Efforts to diminish opportunities for illicit association between the armed forces and criminal groups should complement that agenda, including the following: Champion breaking existing ties between the military and paramilitary successor groups through creative policies involving a mixture of punishments and rewards directed at the military; Investigation and extradition proceedings of drug traffickers, probe all possible ties, including as a matter of course the possibility of Colombian military collaboration. Doing so rigorously may have an important effect deterring military collusion with criminal groups. Establish and enforce zero-tolerance policies at all military ranks regarding collusion with criminal groups; Reward military units that are effective and also avoid corruption and criminal ties by providing them with enhanced resources and recognition; Rely on the military for civic action and development assistance as minimally as possible in order to build long-term civilian public sector capacity and to reduce opportunities for routine exposure of military forces to criminal groups circulating in local populations.

To Integrate Or Not: A Comparison of the English Skills of Finnish Students in Mainstream Education and Content and Language Integrated Learning

The objective of the thesis was to study the possible linguistic differences of English of Finnish mainstream students and Finnish students following content and language integrated learning (CLIL), in terms of the given language test. The difference of test results between the test groups was further analyzed in more detail. The research was carried out by comparing the 9th grade students of the Finnish comprehensive school (the mainstream group) and CLIL students of the 9th grade of the Finnish comprehensive school (the CLIL group). The comparison was based on the national language test for the 9th grade students of the Finnish comprehensive school 2006 (A-English), produced by Sukol-Palvelu, owned by the Federation of Foreign Language Teachers in Finland SUKOL. The mainstream group of the present study consisted of 30 students, whereas the CLIL group included 27 students. Testing was carried out in spring 2007. The test results of the mainstream group (average of 64.1% out of the maximum score) were consistent with the results of the national average (63.9%). The average score of the CLIL students for the present study was 83.3% out of the maximum score. The results of the two groups in question were rather similar in the tasks measuring the skill of listening comprehension, in addition to one of the reading comprehension tasks. Moreover, a particular task with requirements of cultural and reactional skills produced results rather similar between the test groups. The differences between the results of the mainstream group and the CLIL group were most evident in three particular tasks. In general, the CLIL group performed clearly better than the mainstream group in the task measuring the knowledge of the polite conversational manners of the English-speaking world and in the tasks with requirements of lexical and structural knowledge of English. However, the writing task resulted in the most evident difference of results between the groups. In other words, the CLIL students of the present study were clearly more capable of producing English language with more varied vocabulary and more complex structures than the mainstream students. Thus, it might be argued whether the CLIL programme is to enhance the students´ performance in the productive skill of writing in particular. As a result, it might be useful to consider the possibilities of the CLIL programme in developing certain linguistic skills of the mainstream students of English as well.