Mud, sand, heavy and light minerals composition in lower Cretaceous at DSDP Hole 93-603B

During the drilling of Hole 603B on Deep Sea Drilling Project Leg 93, an unexpected series of sand-, silt-, and claystone turbidites was encountered from Cores 603B-45 through -76 (1224-1512 m sub-bottom depth). Complete and truncated Bouma sequences were observed, some indicating deposition by debris flows. Sand emplacement culminated with the deposition of a 30-m-thick, unconsolidated sand unit (Cores 603B-48 through -45). The purpose of this preliminary study is to determine the nature of the heavy mineral suites of this sediment in order to make tentative correlations with onshore equivalents. The heavy mineralogy of Lower Cretaceous North American mid-Atlantic coastal plain sediment has been extensively studied. This sediment is classified as the Potomac Group, which has a varied heavy mineral suite in its lower part (Patuxent Formation), and a limited suite in its upper part (Patapsco Formation). The results of this study reveal a similar trend in the heavy mineral suites of sediment in Hole 603B. Hauterivian through lower Barremian sediment has a heavy mineral suite that is dominated by zircon, apatite, and garnet, with minor amounts of staurolite and kyanite. Beginning in the mid-Barremian, a new source of sediment becomes dominant, one which supplies an epidote-rich heavy mineral suite. The results of the textural analyses show that average grain size of the light mineral fraction increases upsection, whereas sorting decreases. The epidote-rich source may have delivered sediment with a slightly coarser mean grain size. This sediment may represent a more direct continental input at times of maximum turbidite activity (mid-Barremian) and during deposition of the upper, unconsolidated sand unit.

Early Cretaceous dinoflagellate cycsts from ODP Hole 123-765C

Results of a preliminary study of Early Cretaceous dinocyst assemblages from Site 765 on the Argo Abyssal Plain, off northwestern Australia, are presented. The palynological sequence is interpreted in terms of Australian zones and is, in descending order, the late Aptian Diconodinium davidii Zone (Cores 123-765C-33R to -39R), the middle to early Aptian Odontochitina operculata Zone (Cores 123-765C-40R to -49R), the Barremian Muderongia australis Zone (Cores 123-765C-50R to -54R), and the Berriasian lower Batioladinium reticulatum Zone (Core 123-765C-59R). The dating of the sequence as late Aptian to Berriasian on the basis of dinocysts is supported, in part, by data concerning associated foraminiferal, radiolarian, and calcareous nannofossil suites.

Geochemistry and petrology of the volcanic rocks from the Sulu Sea

Major-, trace-, and rare-earth element analyses of the basaltic rocks recovered from the basement of the Sulu Sea and of lithic clasts from the pyroclastic unit representing the acoustic basement of the Cagayan Ridge, are presented. The major and trace elements were measured by X-ray fluorescence techniques, and rare-earth elements by instrumental neutron activation analysis. These data show that the Sulu Sea basalts are back-arc tholeiites and the lithic clasts are basalts, basaltic andesites, and andesites typical of volcanic arc suites erupted on continental crust. Petrogenetic modeling is used to show that the Sulu Sea basalts were derived from a heterogeneous mantle, probably representing subcontinental lithosphere, with contributions from a subduction component. The Sulu Sea is interpreted as a back-arc basin formed by rifting of an Oligocene to early Miocene volcanic arc leaving the Cagayan Ridge as a remnant arc. This event occurred during northward subduction of the Celebes Sea basement beneath the Oligocene to early Miocene arc.

Essentials in Ontology Engineering: Methodologies, Languages, and Tools

In the beginning of the 90s, ontology development was similar to an art: ontology developers did not have clear guidelines on how to build ontologies but only some design criteria to be followed. Work on principles, methods and methodologies, together with supporting technologies and languages, made ontology development become an engineering discipline, the so-called Ontology Engineering. Ontology Engineering refers to the set of activities that concern the ontology development process and the ontology life cycle, the methods and methodologies for building ontologies, and the tool suites and languages that support them. Thanks to the work done in the Ontology Engineering field, the development of ontologies within and between teams has increased and improved, as well as the possibility of reusing ontologies in other developments and in final applications. Currently, ontologies are widely used in (a) Knowledge Engineering, Artificial Intelligence and Computer Science, (b) applications related to knowledge management, natural language processing, e-commerce, intelligent information integration, information retrieval, database design and integration, bio-informatics, education, and (c) the Semantic Web, the Semantic Grid, and the Linked Data initiative. In this paper, we provide an overview of Ontology Engineering, mentioning the most outstanding and used methodologies, languages, and tools for building ontologies. In addition, we include some words on how all these elements can be used in the Linked Data initiative.

Sharing analysis of arrays, collections, and recursive structures

Precise modeling of the program heap is fundamental for understanding the behavior of a program, and is thus of signiflcant interest for many optimization applications. One of the fundamental properties of the heap that can be used in a range of optimization techniques is the sharing relationships between the elements in an array or collection. If an analysis can determine that the memory locations pointed to by different entries of an array (or collection) are disjoint, then in many cases loops that traverse the array can be vectorized or transformed into a thread-parallel versión. This paper introduces several novel sharing properties over the concrete heap and corresponding abstractions to represent them. In conjunction with an existing shape analysis technique, these abstractions allow us to precisely resolve the sharing relations in a wide range of heap structures (arrays, collections, recursive data structures, composite heap structures) in a computationally efflcient manner. The effectiveness of the approach is evaluated on a set of challenge problems from the JOlden and SPECjvm98 suites. Sharing information obtained from the analysis is used to achieve substantial thread-level parallel speedups.

Semantic technologies in idea management systems: a model for interoperability, linking and filtering

Abstract Idea Management Systems are web applications that implement the notion of open innovation though crowdsourcing. Typically, organizations use those kind of systems to connect to large communities in order to gather ideas for improvement of products or services. Originating from simple suggestion boxes, Idea Management Systems advanced beyond collecting ideas and aspire to be a knowledge management solution capable to select best ideas via collaborative as well as expert assessment methods. In practice, however, the contemporary systems still face a number of problems usually related to information overflow and recognizing questionable quality of submissions with reasonable time and effort allocation. This thesis focuses on idea assessment problem area and contributes a number of solutions that allow to filter, compare and evaluate ideas submitted into an Idea Management System. With respect to Idea Management System interoperability the thesis proposes theoretical model of Idea Life Cycle and formalizes it as the Gi2MO ontology which enables to go beyond the boundaries of a single system to compare and assess innovation in an organization wide or market wide context. Furthermore, based on the ontology, the thesis builds a number of solutions for improving idea assessment via: community opinion analysis (MARL), annotation of idea characteristics (Gi2MO Types) and study of idea relationships (Gi2MO Links). The main achievements of the thesis are: application of theoretical innovation models for practice of Idea Management to successfully recognize the differentiation between communities, opinion metrics and their recognition as a new tool for idea assessment, discovery of new relationship types between ideas and their impact on idea clustering. Finally, the thesis outcome is establishment of Gi2MO Project that serves as an incubator for Idea Management solutions and mature open-source software alternatives for the widely available commercial suites. From the academic point of view the project delivers resources to undertake experiments in the Idea Management Systems area and managed to become a forum that gathered a number of academic and industrial partners. Resumen Los Sistemas de Gestión de Ideas son aplicaciones Web que implementan el concepto de innovación abierta con técnicas de crowdsourcing. Típicamente, las organizaciones utilizan ese tipo de sistemas para conectar con comunidades grandes y así recoger ideas sobre cómo mejorar productos o servicios. Los Sistemas de Gestión de Ideas lian avanzado más allá de recoger simplemente ideas de buzones de sugerencias y ahora aspiran ser una solución de gestión de conocimiento capaz de seleccionar las mejores ideas por medio de técnicas colaborativas, así como métodos de evaluación llevados a cabo por expertos. Sin embargo, en la práctica, los sistemas contemporáneos todavía se enfrentan a una serie de problemas, que, por lo general, están relacionados con la sobrecarga de información y el reconocimiento de las ideas de dudosa calidad con la asignación de un tiempo y un esfuerzo razonables. Esta tesis se centra en el área de la evaluación de ideas y aporta una serie de soluciones que permiten filtrar, comparar y evaluar las ideas publicadas en un Sistema de Gestión de Ideas. Con respecto a la interoperabilidad de los Sistemas de Gestión de Ideas, la tesis propone un modelo teórico del Ciclo de Vida de la Idea y lo formaliza como la ontología Gi2MO que permite ir más allá de los límites de un sistema único para comparar y evaluar la innovación en un contexto amplio dentro de cualquier organización o mercado. Por otra parte, basado en la ontología, la tesis desarrolla una serie de soluciones para mejorar la evaluación de las ideas a través de: análisis de las opiniones de la comunidad (MARL), la anotación de las características de las ideas (Gi2MO Types) y el estudio de las relaciones de las ideas (Gi2MO Links). Los logros principales de la tesis son: la aplicación de los modelos teóricos de innovación para la práctica de Sistemas de Gestión de Ideas para reconocer las diferenciasentre comu¬nidades, métricas de opiniones de comunidad y su reconocimiento como una nueva herramienta para la evaluación de ideas, el descubrimiento de nuevos tipos de relaciones entre ideas y su impacto en la agrupación de estas. Por último, el resultado de tesis es el establecimiento de proyecto Gi2MO que sirve como incubadora de soluciones para Gestión de Ideas y herramientas de código abierto ya maduras como alternativas a otros sistemas comerciales. Desde el punto de vista académico, el proyecto ha provisto de recursos a ciertos experimentos en el área de Sistemas de Gestión de Ideas y logró convertirse en un foro que reunión para un número de socios tanto académicos como industriales.

Transcriptional changes and oxidative stress associated with the synergistic interaction between potato virus X and potato virus Y and their relationship with symptom expression.

Many virus diseases of economic importance to agriculture result from mixtures of different pathogens invading the host at a given time. This contrasts with the relatively scarce studies available on the molecular events associated with virus---host interactions in mixed infections. Compared with single infections, co-infection of Nicotiana benthamiana with Potato virus X (PVX) and Potato virus Y (PVY) resulted in increased systemic symptoms (synergism) that led to necrosis of the newly emerging leaves and death of the plant. A comparative transcriptional analysis was undertaken to identify quantitative and qualitative differences in gene expression during this synergistic infection and correlate these changes with the severe symptoms it caused. Global transcription profiles of doubly infected leaves were compared with those from singly infected leaves using gene ontology enrichment analysis and metabolic pathway annotator software. Functional gene categories altered by the double infection comprise suites of genes regulated coordinately, which are associated with chloroplast functions (downregulated), protein synthesis and degradation (upregulated), carbohydrate metabolism (upregulated), and response to biotic stimulus and stress (upregulated). The expressions of reactive oxygen species?generating enzymes as well as several mitogen-activated protein kinases were also significantly induced. Accordingly, synergistic infection induced a severe oxidative stress in N. benthamiana leaves, as judged by increases in lipid peroxidation and by the generation of superoxide radicals in chloroplasts, which correlated with the misregulation of antioxidative genes in microarray data. Interestingly, expression of genes encoding oxylipin biosynthesis was uniquely upregulated by the synergistic infection. Virus-induced gene silencing of ?-dioxygenase1 delayed cell death during PVX?PVY infection.

Deux sonates et La Coquette pour forte piano [Música notada] : oeuvre VI

Encuadernado con: A favourite concerto for the piano-forte or harpsichord with accompaniments for two violins and a violoncello ; Trois trios pour le clavecin ou piano-forte avec violon [et] violoncelle : oeuvre 41. Liv. I y Liv. II ; Haydn's celebrated overture composed for & performed at Mr. Salomon's concert Hanover-Square : adapted for the piano-forte, with an accompaniment for a violin & violoncello ad libitum. N. 2 y N. 3 ; [Sonatas] ; Sonata for the pianoforte or harpsichord : op. 66

Implantación de técnicas de QA en un proyecto de desarrollo software

Hoy en día existe una preocupación creciente por la calidad del software entregado en los proyectos que se realizan a lo largo del mundo. El trabajo de fin de grado que va a ser desarrollado en estas páginas pretende demostrar la importancia de la realización de tests funcionales durante el proceso de desarrollo de software para que el proyecto alcance la calidad requerida tan demandada en estos días. Para ello, después de una pequeña introducción a la historia del software, se presentarán y compararán diversos tipos de metodologías de desarrollo de software, tanto pesadas (cascada, espiral, etc.) como ágiles (Extreme Programming y Scrum), se enfatizará en dichas metodologías ágiles y cómo el proceso de testing y control de calidad encaja perfectamente con la filosofía de las citadas metodologías ágiles. Se desarrollará una explicación del papel de QA en el desarrollo de software, asi como una explicación de los tipos de test existentes, y las herramientas, tecnologías y patrones que existen a disposición de aquellos que quieran desempeñar el papel de QA. Para complementar el punto de vista teórico de este trabajo se presentará un caso práctico real realizado en la empresa bq bajo una metodología Scrum. Dicho caso práctico muestra el uso de ciertas herramientas y su aporte para el control de calidad del proyecto bajo desarrollo, demostrando su importancia. Se realizará énfasis en el proceso de automatización de ciertas baterías de test (llamadas test suites), mostrando desde el planteamiento inicial de las diferentes historias de usuario y la batería de test, pasando por la elección de las tecnologías más adecuadas para la elaboración de los test hasta llegar al lanzamiento de dicha batería de pruebas y la comprobación de éstas. El punto de vista práctico quedará complementado por una explicación del framework nightwatch.js, framework utilizado en el desarrollo del proyecto en bq para la automatización de test funcionales. Esta explicación comprenderá tanto la configuración y uso del framework como el uso de patrones y la estructura de las pruebas. ABSTRACT Nowadays there is a growing concern about the Quality of the software delivered in the projects that are made all around the world. This final project will try to prove the importance of performing functional tests during the Software Development Process in order to be able to reach the demanded Quality. To fulfill this objective, different types of Software Development methodologies will be presented and compared. Heavy methodologies (waterfall, spiral methodologies, etc.) as well as agile methodologies (Extreme Programming and Scrum). There will be an emphasis in the second kind (agile methodologies) and how the testing and quality assurance process fits perfectly in their philosophy. A deep explanation of the role that Quality Assurance holds on software development will be presented, as well as an explanation on the current types of testing and an explanation of the different tools; technologies and patrons that exist to help anyone who wants to perform the role of QA. To complement the theoretical perspective of this work a real case study, performed at the company bq under a Scrum methodology, will be presented. The mentioned study covers the use of certain tools and their input for the quality assurance of the project under development, proving its relevance. Emphasis will be made in the process of conducting a set of tests (called test suite), showing from the initial approach of the different users stories and the set of tests, going through the choosing of the most suitable technologies for the tests development, and ending with the performance of this battery of tests and their checkout. The practical point of view will be complemented by a deep explanation of the creation process using the nightwatch.js automated test framework, used in the project in bq. This explanation will cover both the configuration and use of the framework as the use of patterns and structure of the tests.

Rapid mass spectrometric peptide sequencing and mass matching for characterization of human melanoma proteins isolated by two-dimensional PAGE.

We report a general mass spectrometric approach for the rapid identification and characterization of proteins isolated by preparative two-dimensional polyacrylamide gel electrophoresis. This method possesses the inherent power to detect and structurally characterize covalent modifications. Absolute sensitivities of matrix-assisted laser desorption ionization and high-energy collision-induced dissociation tandem mass spectrometry are exploited to determine the mass and sequence of subpicomole sample quantities of tryptic peptides. These data permit mass matching and sequence homology searching of computerized peptide mass and protein sequence data bases for known proteins and design of oligonucleotide probes for cloning unknown proteins. We have identified 11 proteins in lysates of human A375 melanoma cells, including: alpha-enolase, cytokeratin, stathmin, protein disulfide isomerase, tropomyosin, Cu/Zn superoxide dismutase, nucleoside diphosphate kinase A, galaptin, and triosephosphate isomerase. We have characterized several posttranslational modifications and chemical modifications that may result from electrophoresis or subsequent sample processing steps. Detection of comigrating and covalently modified proteins illustrates the necessity of peptide sequencing and the advantages of tandem mass spectrometry to reliably and unambiguously establish the identity of each protein. This technology paves the way for studies of cell-type dependent gene expression and studies of large suites of cellular proteins with unprecedented speed and rigor to provide information complementary to the ongoing Human Genome Project.

Caracterização geocronológica (U-Pb), geoquímica e isotópica (Sr, Nd, Hf) do complexo Rio Capivari no terreno Embu

O Complexo Rio Capivari (CRC) é constituído por ortognaisses migmatíticos de composições graníticas a tonalíticas e anfibolitos subordinados (magmas toleíticos) em lascas tectônicas no Terreno Embu. As composições dos gnaisses do CRC são predominantemente cálcio-alcalinas a álcali-cálcicas. Idades U-Pb em núcleos de zircão com zoneamento oscilatório indicam cristalização magmática dos protólitos em três períodos principais 2.4, 2.2-2.1 e 2.0 Ga. Idades metamórficas foram reconhecidas em bordas de zircão totalmente escuras nas imagens de catodoluminescência e variam entre 620-590 Ma. A suíte sideriana (2.4 Ga) apresenta caráter juvenil, como evidenciado pelos valores positivos de \'\'épsilon\'\'IND.Nd\' (+3.8) e \'\'épsilon\'\'IND.Hf\' (+0.3 a +4.8) e pela ausência de núcleos de zircão herdado, comumente encontrados em rochas que sofreram retrabalhamento crustal. A suíte de idades riacianas (2.2-2.1 Ga) apresenta idades modelos TDM arqueanas (2.6-3.3 Ga), valores negativos de \'\'épsilon\'\'IND.Nd\' (-12.0 a -4.0) e negativos a levemente positivos de \'\'épsilon\'\'IND.Hf\' (-7.8 a +0.5). Portanto, tais rochas derivam de retrabalhamento de reservatórios crustais antigos. A suíte de idade orosiriana (2.0 Ga) apresenta fontes mais antigas e retrabalhadas com valores altamente negativos de \'\'épsilon\'\'IND.Nd\' (-10.4) e \'\'épsilon\'\'IND.Hf\' (-1.2 a -13.6), sugerindo prolongada residência crustal com idades modelo \'T IND.DM\' e \'T IND.Hf\' >3.3 Ga. As assinaturas de elementos traços em rocha total e a química de zircão sugerem fontes máficas para o gnaisse sideriano. Reservatórios de crosta média, mas de profundidades variáveis, parecem ser a principal fonte dos gnaisses riacianos e orosirianos. Análises em diagramas tectônicos discriminantes baseados em elementos traços de rocha total com elevadas razões \'La/Yb IND.(N)\' (>10), Nb/Yb (>2) e Th/Yb (>1), somados aos valores de \'Y IND.2\'\'O IND.3\' (<3000 ppm), U/Yb (>0.5) e Nb/Yb (0.01-0.10) da química de zircão, sugerem que ambas as suítes de idades foram geradas em ambientes de arco magmático continental, mas com um gap de 200-300 Ma entre o gnaisse sideriano e os gnaisses riacianos sem dados ou informações geológicas. Perfis multielementos (elementos traços) comparativos entre representação de amostras típicas de arco continental associado à subducção de crosta oceânica (margem andina) e amostras de arcos de ilha (Ilhas Mariana) confirmam afinidade com ambiente de arco continental para o CRC, associado à subducção de placa oceânica, principalmente para o gnaisse sideriano. Apesar de pouco representativo, devido ao número de amostras (n=1), uma acresção juvenil em 2.4 Ga colabora para uma dinâmica contínua da evolução da crosta continental. O papel desempenhado pelo CRC na evolução geral do Terreno Embu permanece enigmático. Os dados isotópicos de \'\'épsilon\'\'IND.Nd(590)\' e \'ANTPOT.87 Sr\'/\'ANTPOT.88 Sr IND.(i)\' do CRC (-27.3 a -19.7 e 0.704 a 0.722, respectivamente) indicam evolução temporal não compatível com o requerido para as fontes dos granitos ediacaranos do Terreno Embu, que exigem a participação de reservatórios mais primitivos (\'\'épsilon\'\'IND.Nd(590)\' -13 a -7) e empobrecidos em Rb (\'ANTPOT.87 Sr\'/\'ANTPOT.88 Sr IND.(i)\' \'\'QUASE IGUAL A\' 0,710).

Aplicação de modelos de defeitos na geração de conjuntos de teste completos a partir de Sistemas de Transição com Entrada/Saída

O Teste Baseado em Modelos (TBM) emergiu como uma estratégia promissora para minimizar problemas relacionados à falta de tempo e recursos em teste de software e visa verificar se a implementação sob teste está em conformidade com sua especificação. Casos de teste são gerados automaticamente a partir de modelos comportamentais produzidos durante o ciclo de desenvolvimento de software. Entre as técnicas de modelagem existentes, Sistemas de Transição com Entrada/Saída (do inglês, Input/Output Transition Systems - IOTSs), são modelos amplamente utilizados no TBM por serem mais expressivos do que Máquinas de Estado Finito (MEFs). Apesar dos métodos existentes para geração de testes a partir de IOTSs, o problema da seleção de casos de testes é um tópico difícil e importante. Os métodos existentes para IOTS são não-determinísticos, ao contrário da teoria existente para MEFs, que fornece garantia de cobertura completa com base em um modelo de defeitos. Esta tese investiga a aplicação de modelos de defeitos em métodos determinísticos de geração de testes a partir de IOTSs. Foi proposto um método para geração de conjuntos de teste com base no método W para MEFs. O método gera conjuntos de teste de forma determinística além de satisfazer condições de suficiência de cobertura da especificação e de todos os defeitos do domínio de defeitos definido. Estudos empíricos avaliaram a aplicabilidade e eficácia do método proposto: resultados experimentais para analisar o custo de geração de conjuntos de teste utilizando IOTSs gerados aleatoriamente e um estudo de caso com especificações da indústria mostram a efetividade dos conjuntos gerados em relação ao método tradicional de Tretmans.

Ferramentas open source de Data Mining

Em época de crise financeira, as ferramentas open source de data mining representam uma nova tendência na investigação, educação e nas aplicações industriais, especialmente para as pequenas e médias empresas. Com o software open source, estas podem facilmente iniciar um projeto de data mining usando as tecnologias mais recentes, sem se preocuparem com os custos de aquisição das mesmas, podendo apostar na aprendizagem dos seus colaboradores. Os sistemas open source proporcionam o acesso ao código, facilitando aos colaboradores a compreensão dos sistemas e algoritmos e permitindo que estes o adaptem às necessidades dos seus projetos. No entanto, existem algumas questões inerentes ao uso deste tipo de ferramenta. Uma das mais importantes é a diversidade, e descobrir, tardiamente, que a ferramenta escolhida é inapropriada para os objetivos do nosso negócio pode ser um problema grave. Como o número de ferramentas de data mining continua a crescer, a escolha sobre aquela que é realmente mais apropriada ao nosso negócio torna-se cada vez mais difícil. O presente estudo aborda um conjunto de ferramentas de data mining, de acordo com as suas características e funcionalidades. As ferramentas abordadas provém da listagem do KDnuggets referente a Software Suites de Data Mining. Posteriormente, são identificadas as que reúnem melhores condições de trabalho, que por sua vez são as mais populares nas comunidades, e é feito um teste prático com datasets reais. Os testes pretendem identificar como reagem as ferramentas a cenários diferentes do tipo: performance no processamento de grandes volumes de dados; precisão de resultados; etc. Nos tempos que correm, as ferramentas de data mining open source representam uma oportunidade para os seus utilizadores, principalmente para as pequenas e médias empresas, deste modo, os resultados deste estudo pretendem ajudar no processo de tomada de decisão relativamente às mesmas.

An insight into the breakup of Gondwana: Identifying events through low-temperature thermochronology from the basement rocks of Madagascar

Fission track analysis was applied to the Precambrian suites of Madagascar in order to identify the lower-temperature cooling histories and their relationships to the Phanerozoic events that affected the island. Apatite ages range from 431 to 68 Ma, and zircon ages range from 452 to 238 Ma. Thermochronologically, the island can be divided into a southern, central, and northern region each with a subdivision on an east-west basis. The southern region is sharply separated from the central region by strongly contrasting apparent apatite ages over the northwest-southeast striking Ranotsara Shear Zone (RSZ). The change in apparent ages over the RSZ is indicative of later reactivation along younger brittle faults. The central region has the oldest ages of the island and has a diffuse contact to the third region northward. Along the entire western margin of the Precambrian basement initial Paleozoic exhumation was followed by heating (burial by sediments) during Jurassic and Cretaceous times. A decrease in ages along the eastern margin from 119 to 68 Ma coincides with the predicted positions of the Marion hot spot after effects of erosion are considered. On the other hand, these ages may represent progressive opening of the margin in a southward direction together with associated denudation of the rift shoulder. The eastern part of the central region has remained very stable since at least Devonian times, undergoing only long-term very slow exhumation at rates of 1–5 m/Myr.

Sediment constituents and quartz in the sand-sized fraction, West Florida slope and Mississippi Fan sediments

The interval between 488.2 and 513.7 m below seafloor at Deep Sea Drilling Project (DSDP) Site 615 is interpreted as a single carbonate gravity-flow deposit. The deposit has characteristics of both a debris flow and a high-density turbidity current. Comparison of the sedimentary constituents in 15 samples from this site with samples from 26 core tops from the upper West Florida continental slope and eastern Mississippi Fan shows many similarities. Shallow-water indicators, such as mollusk and echinoid fragments, occur in both suites of samples. The West Florida continental margin, therefore, is a potential provenance area. The Yucatan slope is also a possible source, but data from it are limited. The recognition of carbonate gravity-flow deposits intercalated within the Mississippi Fan refines our understanding of Pleistocene sedimentation within the Gulf basin. Deposition in the deep Gulf is dominated by the construction of the Mississippi Fan. However, this marine terrigenous depocenter is located between two large carbonate depocenters, the West Florida continental margin on the east and the Yucatan peninsula on the southwest. Periodically, the carbonate slope in these two regions fails, injecting carbonate gravity flows into the accreting terrigenous deep-sea fan.