Effects of sodium sulphate and potassium chloride fertilizers on the nutritive value of timothy grown on different soils

Selostus: Natrium- ja kaliumlannoituksen vaikutus timotein ravintoarvoon

Metal concentrations in soils around the copper smelter and surrounding industrial complex of Port Kembla, NSW, Australia

Anthropogenic emissions of metals from sources such as smelters are an international problem, but there is limited published information on emissions from Australian smelters. The objective of this study was to investigate the regional distribution of heavy metals in soils in the vicinity of the industrial complex of Port Kembla, NSW, Australia, which comprises a copper smelter, steelworks and associated industries. Soil samples (n=25) were collected at the depths of 0-5 and 5-20 cm, air dried and sieved to < 2 mm. Aqua regia extractable amounts of As, Cr, Cu, Ph and Zn were analysed by inductively coupled plasma mass spectrometry (lCP-MS) and inductively coupled plasma atomic emission spectrometry (ICP-AES). Outliers were identified from background levels by statistical methods. Mean background levels at a depth of 0-5 cm were estimated at 3.2 mg/kg As, 12 mg/kg Cr, 49 mg/kg Cu, 20 mg/kg Ph and 42 mg/kg Zn. Outliers for elevated As and Cu values were mainly present within 4 km from the Port Kembla industrial complex, but high Ph at two sites and high Zn concentrations were found at six sites up to 23 km from Port Kembla. Chromium concentrations were not anomalous close to the industrial complex. There was no significant difference of metal concentrations at depths of 0-5 and 5-20 cm, except for Ph and Zn. Copper and As concentrations in the soils are probably related to the concentrations in the parent rock. From this investigation, the extent of the contamination emanating from the Port Kembla industrial complex is limited to 1-13 km, but most likely <4 km, depending on the element; the contamination at the greater distance may not originate from the industrial complex. (C) 2003 Elsevier B.V. All rights reserved.

Phosphorus saturation of Finnish soils : evaluating an easy oxalate extraction method

Selostus: Alumiini- ja rautaoksidien fosforikyllästysasteen arvioiminen suomalaisista peltomaista

Soils in a young landscape on the coast of southern Finland

Selostus: Nuoria maita Viikin pelloilla

Enhanced biodegradation of hexachlorocyclohexane (HCH) in contaminated soils via inoculation with Sphingobium indicum B90A.

Soil pollution with hexachlorocyclohexane (HCH) has caused serious environmental problems. Here we describe the targeted degradation of all HCH isomers by applying the aerobic bacterium Sphingobium indicum B90A. In particular, we examined possibilities for large-scale cultivation of strain B90A, tested immobilization, storage and inoculation procedures, and determined the survival and HCH-degradation activity of inoculated cells in soil. Optimal growth of strain B90A was achieved in glucose-containing mineral medium and up to 65% culturability could be maintained after 60 days storage at 30 degrees C by mixing cells with sterile dry corncob powder. B90A biomass produced in water supplemented with sugarcane molasses and immobilized on corncob powder retained 15-20% culturability after 30 days storage at 30 degrees C, whereas full culturability was maintained when cells were stored frozen at -20 degrees C. On the contrary, cells stored on corncob degraded gamma-HCH faster than those that had been stored frozen, with between 15 and 85% of gamma-HCH disappearance in microcosms within 20 h at 30 degrees C. Soil microcosm tests at 25 degrees C confirmed complete mineralization of [(14)C]-gamma-HCH by corncob-immobilized strain B90A. Experiments conducted in small pits and at an HCH-contaminated agricultural site resulted in between 85 and 95% HCH degradation by strain B90A applied via corncob, depending on the type of HCH isomer and even at residual HCH concentrations. Up to 20% of the inoculated B90A cells survived under field conditions after 8 days and could be traced among other soil microorganisms by a combination of natural antibiotic resistance properties, unique pigmentation and PCR amplification of the linA genes. Neither the addition of corncob nor of corncob immobilized B90A did measurably change the microbial community structure as determined by T-RFLP analysis. Overall, these results indicate that on-site aerobic bioremediation of HCH exploiting the biodegradation activity of S. indicum B90A cells stored on corncob powder is a promising technology.

PERSISTENCE OF ATRAZINE, METRIBUZIN AND SIMAZINE HERBICIDES IN TWO SOILS

An oat bioassay was conducted in pots under greenhouse conditions to determine the persistence of atrazine, metribuzin and simazine herbicides in soils of the southeast of Buenos Aires Province, Argentina. Atrazine rates of 0, 0.58, 1.16 and 2.32 mug g-1 of active ingredient (a.i.), metribuzin rates of 0, 0.14, 0.28 and 0.56 mug g-1 of a.i., and simazine rates of 0, 0.72, 1.45 and 2.9 mug g-1 of a.i. dry soil weight were applied to pots containing soils from Balcarce and San Cayetano sites. Organic matter (OM) content and pH of Balcarce soil were 5.5% and 5.8%, while for San Cayetano soil were 2.9% and 6.7%, respectively. Relative dry weight (RDW) of oat shoots was calculated as percentage of control. Considering a 20% RDW reduction of oat shoots, persistences of recommended rates for the region were: atrazine (1.16 mug g-1 of a.i.), 78 and 130 days after treatment (DAT) for Balcarce and San Cayetano soil, respectively; metribuzin (0.28 mug-1 of a.i.), 63 and 77 DAT for Balcarce and San Cayetano soil, respectively; simazine (1.45 mug g-1 of a.i.), 81 and 156 DAT for Balcarce and San Cayetano soil, respectively. Results show that persistence of atrazine, metribuzin and simazine in soil increased with high rates, low OM content and high pH.

Fruit size, mineral composition and quality of trickle-irrigated tomatoes as affected by potassium rates

An experiment was conducted to determine the fruit size, mineral composition and quality of trickle-irrigated tomatoes as affected by potassium fertilizer rates. Six potassium (K) rates were applied as KCl, corresponding to 0, 48.4, 118.6, 188.8, 259.0 and 399.4 kg ha-1, with four replicates, following a randomized block design. Quadratic responses to K rates were observed for double extra large (diameter > 60 mm), extra large (56 to 60 mm) and large (52 to 56 mm) fruit yields. Maximum yields of these classes were achieved with K rates of 116, 190 and 233 kg ha-1, respectively. Fruit dry matter, phosphorus, sulfur and magnesium contents were not affected by K rates, but nitrate and K contents showed significant increments as K rates were increased. Vitamin C, total soluble solids, lycopene and beta-carotene contents in the fruits were not affected by K rates. Increments in the K rate lowered the fruit pH and increased total acids content.

Boron adsorption in soils from the State of São Paulo, Brazil

Boron adsorption was studied in five representative soils (Rhodic Hapludox, Arenic Paleudalf and three Typic Hapludox) from the State of São Paulo, Brazil. Adsorption was higher in the clayey Oxisols, followed by the Alfisol and the coarser Oxisols. Calcium carbonate promoted an increase in the amount of adsorbed boron in all soils, with the most pronounced effect in the coarser-textured Oxisols. High correlation coefficients were found between adsorbed boron and clay and amorphous aluminum oxide contents and specific surface area (r = 0.79, 0.76 and 0.73, respectively, p < 0.01). Clay content, free aluminum oxide, and hot CaCl2 (0.01 mol L-1)-extracted boron explained 93% of the variation of adsorbed boron. Langmuir and Freundlich isotherms fitted well to the adsorbed data, and highest values for maximum boron adsorption were found in clayey soils, which were significantly correlated with contents of total, free and amorphous iron and aluminum oxides, as well with the physical attributes. Ninety four percent of the variation in the maximum adsorption could be related to the free iron content.

Long-term and long range migration of radioisotopes in terrestrial systems : mechanisms of radioisotopes (Cs, Sr, Pu, Am) mobilization in soils

Summary Artificial radionuclides were released in the environment during the atmospheric nuclear weapon tests and after accidental events involving nuclear industries. As a primary receptor of the deposition, the soil is a very sensitive compartment and understanding the interaction and migration of radionuclides within soils allows the development of scenario for the contamination risk of the population and of the environment. Most available field studies on radionuclides in soils only concern one or two isotopes, mostly 137Cs, and few physico-chemical soil parameters. The purpose of this study was a broader understanding of the radioecology of an Alpine valley. In a first part, we aimed to describe the depth distribution of 137Cs, 90Sr, 239+240Pu, and 241Am within different alpine soils and to identify some stable elements as indicators for accumulating layers. In the central part of the study, the goal was to investigate the repartition of ^Sr and 239Pu between the truly dissolved fraction and the colloidal fraction of the soil solutions and to identify the nature of colloids involved in the adsorption of ^Sr and 239Pu. These results were integrated in an "advection- sorption" transport model seeking to explain the migration of 239Pu and 90Sr within the soils and to assess the importance of colloidal transport for these two isotopes. A further aspect studied was the role of the competition between the radioisotopes (137Cs and 90Sr) and their stable chemical analogues (K and Ca) with respect to plant uptake by different plant species. The results on the depth distribution within the soils showed that 137Cs was mostly retained in the topsoil, to the exception of an organic-rich soil (Histosol 2) receiving important surface runoff, where migration down to a depth of 30 cm was observed. 137Cs depth distribution within the soils was similar to unsupported 210Pb depth distribution. The plant uptake of 137Cs clearly depended on the concentration of exchangeable potassium in the soils. Moreover, we showed that the 137Cs uptake by certain species of the taxonomic orders Poales and Rosales was more sensitive to the increase in exchangeable Κ compared to other orders. Strontium-90 was much more mobile in the soils than 137Cs and depth migration and accumulation in specific AI- and Fe-rich layers were found down to 30 cm. Copper and Ni showed accumulations in these same layers, indicating their potential to be used as indicators for the migration of ^Sr within the soils. In addition, we observed a 90Sr activity peak in the topsoil that can be attributable to recycling of 90Sr by plant uptake. We demonstrated for the first time that a part of 90Sr (at least 40%) was associated with the colloids in organic-rich soil solutions. Therefore, we predict a significant effect of the colloidal migration of ^Sr in organic-rich soil solutions. The plant uptake results for 90Sr indicated a phylogenetic effect between Non-Eudicot and Eudicots: the order Poales concentrating much less 90Sr than Eudicots do. Moreover, we were able to demonstrate that the sensitivity of the 90Sr uptake by 5 different Alpine plant species to the amount of exchangeable Ca was species-independent. Plutonium and 241Am accumulated in the second layer of all soils and only a slight migration deeper than 20 cm was observed. Plutonium and 241Am showed a similar depth distribution in the soils. The model results suggested that the present day migration of 239Pu was very slow and that the uptake by plants was negligible. 239Pu activities between 0.01 to 0.08 mBq/L were measured in the bulk soil solutions. Migration of 239Pu with the soil solution is dominated by colloidal transport. We reported strong evidences that humic substances were responsible of the sorption of 239Pu to the colloidal fraction of the soil solutions. This was reflected by the strong correlation between 239Pu concentrations and the content of (colloidal) organic matter in the soil solution. Résumé Certains radioéléments artificiels ont été disséminés dans l'environnement suite aux essais atmosphériques de bombes nucléaires et suite à des accidents impliquant les industries nucléaires. En tant que récepteur primaire de la déposition, le sol est un compartiment sensible et des connaissances sur les interactions et la migration des radioéléments dans le sol permettent de développer des modèles pour estimer la contamination de la population et de l'environnement. Actuellement, la plupart des études de terrain sur ce sujet concernent uniquement un ou deux radioéléments, surtout le 137Cs et peu d'études intègrent les paramètres du sol pour expliquer la migration des radioéléments. Le but général de cette étude était une compréhension étendue de la radio-écologie d'une vallée alpine. Notre premier objectif était de décrire la distribution en profondeur de 137Cs, ^Sr, 239+240pu et 241Am dans différents sols alpins en relation avec des éléments stables du sol, dans le but d'identifier des éléments stables qui pourraient servir d'indicateurs pour des horizons accumulateurs. L'objectif de la deuxième partie, qui était la partie centrale de l'étude, était d'estimer le pourcentage d'activité sous forme colloïdale du 239Pu et du 90Sr dans les solutions des sols. De plus nous avons déterminé la nature des colloïdes impliqués dans la fixation du ^Sr et 239Pu. Nous avons ensuite intégré ces résultats dans un modèle de transport développé dans le but de décrire la migration du 239Pu et 90Sr dans le sol. Finalement, nous avons étudié l'absorption de 137Cs et 90Sr par les plantes en fonction de l'espèce et de la compétition avec leur élément analogue stable (K et Ca). Les résultats sur la migration en profondeur du 137Cs ont montré que ce radioélément était généralement retenu en surface, à l'exception d'un sol riche en matière organique dans lequel nous avons observé une nette migration en profondeur. Dans tous les sols, la distribution en profondeur du 137Cs était corrélée avec la distribution du 210Pb. L'absorption du 137Cs par les plantes, était dépendante de la concentration en Κ échangeable dans le sol, le potassium étant un compétiteur. De plus, nous avons observé que les espèces ne réagissaient pas de la même manière aux variations de la concentration de Κ échangeable. En effet, les espèces appartenant aux ordres des Poales et des Rosales étaient plus sensibles aux variations de potassium échangeable dans le sol. Dans tous les sols Le 90Sr était beaucoup plus mobile que le 137Cs. En effet, nous avons observé des accumulations de 90Sr dans des horizons riches en Fe et Al jusqu'à 30 cm de profondeur. De plus, le Cu et le Ni montraient des accumulations dans les mêmes horizons que le 90Sr, indiquant qu'il pourrait être possible d'utiliser ces deux éléments comme analogues pour la migration du 90Sr. D'après le modèle développé, le pic de 90Sr dans les premiers centimètres du sol peut être attribué à du recyclage par les plantes. Le 90Sr en solution était principalement sous forme dissoute dans des solutions de sols peu organique (entre 60 et 100% de 90Sr dissous). Par contre, dans des solutions organiques, un important pourcentage de 90Sr (plus de 40%) était associé aux colloïdes. La migration colloïdale du 90Sr peut donc être significative dans des solutions organiques. Comme pour le 137Cs, l'absorption du 90Sr par les plantes dépendait de la concentration de son analogue chimique dans la fraction échangeable du sol. Par contre, les espèces de plantes étudiées avaient la même sensibilité aux variations de la concentration du calcium échangeable. Le plutonium et l'américium étaient accumulés dans le deuxième horizon du sol et nous avons observé seulement une faible migration plus profondément que 20 cm. Selon le modèle, la migration actuelle du plutonium est très lente et l'absorption par les plantes semble négligeable. Nous avons mesuré entre 0.01 et 0.08 mBq/L de 239Pu dans les solutions de sol brutes. La migration du plutonium par la solution du sol est due principalement aux colloïdes, probablement de nature humique. Résumé grand public Dans les années 1950 à 1960, l'environnement a été contaminé par des éléments radioactifs (radioéléments) artificiels provenant des essais des armes atomiques et de l'industrie nucléaire. En effet, durant ces années, les premiers essais de bombes atomiques se faisaient dans l'atmosphère, libérant de grandes quantités d'éléments radioactifs. De plus certains accidents impliquant l'industrie nucléaire civile ont contribué à la dissémination d'éléments radioactifs dans l'environnement. Ce fut par exemple le cas de l'accident de la centrale atomique de Tchernobyl en 1986 qui a causé une importante contamination d'une grande partie de l'Europe par le 137Cs. Lorsqu'ils sont libérés dans l'atmosphère, les radioéléments sont dispersés et transportés par les courants atmosphériques, puis peuvent être déposés dans l'environnement, principalement par les précipitations. Une fois déposés sur le sol, les radioéléments vont interagir avec les composants du sol et migrer plus ou moins vite. La connaissance des interactions des éléments radioactifs avec le sol est donc importante pour prédire les risques de contamination de l'environnement et de l'homme. Le but général de ce travail était d'évaluer la migration de différents éléments radioactifs (césium-137, strontium-90, plutonium et américium-241) à travers le sol. Nous avons choisi un site d'étude en milieu alpin (Val Piora, Tessin, Suisse), contaminé en radioéléments principalement par les retombées de l'accident de Tchernobyl et des essais atmosphériques de bombes atomiques. Dans un premier temps, nous avons caractérisé la distribution en profondeur des éléments radioactifs dans le sol et l'avons comparée à divers éléments stables. Cette comparaison nous a permit de remarquer que le cuivre et le nickel s'accumulaient dans les mêmes horizons du sol que le strontium-90 et pourraient donc être utilisés comme analogue pour la migration du strontium-90 dans les sols. Dans la plupart des sols étudiés, la migration du césium-137, du plutonium et de l'américium-241 était lente et ces radioéléments étaient donc accumulés dans les premiers centimètres du sol. Par contre, le strontium-90 a migré beaucoup plus rapidement que les autres radioéléments si bien qu'on observe des accumulations de strontium-90 à plus de 30 cm de profondeur. Les radioéléments migrent dans la solution du sol soit sous forme dissoute, soit sous forme colloïdale, c'est-à-dire associés à des particules de diamètre < Ιμηι. Cette association avec des colloïdes permet à des radioéléments peu solubles, comme le plutonium, de migrer plus rapidement qu'attendu. Nous avons voulu savoir quelle était la part de strontium-90 et plutonium associés à des colloïdes dans la solution du sol. Les résultats ont montré que le plutonium en solution était principalement associé à des colloïdes de type organique. Quant au strontium-90, ce dernier était en partie associé à des colloïdes dans des solutions de sol riches en matière organique, par contre, il était principalement sous forme dissoute dans les solutions de sol peu organiques. L'absorption de radioéléments par les plantes représente une voie importante pour le transfert vers la chaîne alimentaire, par conséquent pour la contamination de l'homme. Nous avons donc étudié le transfert du césium-137 et du strontium-90 de plusieurs sols vers différentes espèces de plantes. Les résultats ont montré que l'absorption des radioéléments par les plantes était liée à la concentration de leur analogue chimique (calcium pour le strontium-90 et potassium pour le césium- 137) dans la fraction échangeable du sol. De plus certaines espèces de plantes accumulent significativement moins de strontium-90.

X-Ray Diffraction Studies of Soils and Soil Stabilizers, HR-106, 1965

The two goals of this project stated in the Proposal were: (1) study lime diffusion in clayey soils, and (2) find the role of MgO in soil-dolomitic lime stabilization. Because of the practice significance of these goals we temporarily overstaffed this project, giving somewhat a "crash" program. As a result, proposed work was finished up early (as were the funds), and more important, some of the findings were early enough and of sufficient merit to put into field trials in the Fall of 1964. The work now being completed and the funds all being expended, this Final Report is therefore submitted before the anticipated project termination date.

Phosphorus in Finnish soils in the 1900s with particular reference to the acid ammonium acetate soil test

Selostus: Suomen maaperän fosforin tutkiminen 1900-luvulla ja viljavuustutkimuksen kehittäminen

Performance of Randomly Oriented, Fiber-Reinforced Roadway Soils, HR-211, 1982

Several primary techniques have been developed through which soil aggregate road material properties may be improved. Such techniques basically involve a mechanism of creating a continuous matrix system of soil and/or aggregate particles, interlocked through the use of some additive such as portland cement, lime, or bituminous products. Details by which soils are stabilized vary greatly, but they are dependent on the type of stabilizing agent and nature of the soil, though the overall approach to stabilization has the common feature that improvement is achieved by some mechanism(s) forcing individual particles to adhere to one another. This process creates a more rigid material, most often capable of resisting the influx of water during freezing, loss of strength due to high moisture content and particle dispersion during thawing, and loss of strength due to migration of fines and/or water by capillarity and pumping. The study reported herein, took a new and relatively different approach to strengthening of soils, i.e., improvement of roadway soils and/or soil-aggregate materials by structural reinforcement with randomly oriented fibers. The purpose of the study was to conduct a laboratory and field investigation into the potential of improving (a) soil-aggregate surfaced and subgrade materials, including those that are frost-prone and/or highly moisture susceptible, and (b) localized base course materials, by uniting such materials through fibrous reinforcement. The envisioned objective of the project was the development of a simple construction technique(s) that could be (a) applied on a selective basis to specific areas having a history of poor performance, or (b) used for improvement of potential base materials prior to surfacing. Little background information on such purpose and objective was available. Though the envisioned process had similarities to fibrous reinforced concrete, and to fibrous reinforced resin composites, the process was devoid of a cementitious binder matrix and thus highly dependent on the cohesive and frictional interlocking processes of a soil and/or aggregate with the fibrous reinforcement; a condition not unlike the introduction of reinforcing bars into a concrete sand/aggregate mixture without benefit of portland cement. Thus the study was also directed to answering some fundamental questions: (1) would the technique work; (2) what type or types of fibers are effective; (3) are workable fibers commercially available; and (4) can such fibers be effectively incorporated with conventional construction equipment, and employed in practical field applications? The approach to obtaining answers to these questions, was guided by the philosophy that an understanding of basic fundamentals was essential to developing a body of engineering knowledge, that would serve as the basis for eventual development of design procedures with fibrous products for the applications previously noted.