Diversity of pigmentation in cultured human melanocytes is due to differences in the type as well as quantity of melanin

Cultured human melanocytes differ tremendously in visual pigmentation, and recapitulate the pigmentary phenotype of the donor's skin. This diversity arises from variation in type as well as quantity of melanin produced. Here, we measured contents of eumelanin (EM) and pheomelanin (PM) in 60 primary human melanocyte cultures (51 neonatal and nine adults), and correlated some of these values with the respective activity and protein levels of tyrosinase, and the melanocortin-1 receptor (MC1R) genotype. Melanocytes were classified into four phenotypes (L, L+, D, D+) as depicted by visual pigmentation using light microscopy, and by the pigmentary phenotype of the donor's skin. There were large differences in total melanin (TM) and EM, which increased progressively for L, L+, D and D+ melanocytes. TM content, the sum of EM and PM, showed a good correlation with TM measured spectrophotometrically, and with the activity and protein levels of tyrosinase. Log EM/PM ratio did not correlate with MC1R genotype. We conclude that: (i) EM consistently correlates with the visual phenotype; (ii) lighter melanocytes tend to be more pheomelanic in composition than darker melanocytes; (iii) in adult melanocyte cultures, EM correlates with the ethnic background of the donors (African-American > Indian > Caucasian); and (iv) MC1R loss-of-function mutations do not necessarily alter the phenotype of cultured melanocytes.

Do simple intransitive finger movements consistently activate frontoparietal mirror neuron areas in humans?

The posterior inferior frontal gyrus (pIFG) and anterior inferior parietal lobule (aIPL) form the core regions of the human “mirror neuron system” that matches an observed movement onto its internal motor representation. We used event-related functional MRI to examine whether simple intransitive finger movements evoke “mirror activity” in the pIFG and aIPL. In separate sessions, participants either merely observed visuospatial stimuli or responded to them as quickly as possible with a spatially compatible finger movement. A picture of a relaxed hand with static dots on the tip of the index and little finger was continuously presented as high-level baseline. Four types of stimuli were presented in a pseudorandom order: a color change of a dot, a moving finger, a moving dot, or a simultaneous finger-dot movement. Dot movements were spatially and kinematically matched to finger movements. Participants were faster at imitating a finger movement than performing the same movement in response to a moving dot or a color change of a dot. Though imitative responses were facilitated, fMRI revealed no additional “mirror activity” in the pIFG and aIPL during the observation or imitation of finger movements as opposed to observing or responding to a moving dot. Mere observation of a finger movement alone failed to induce significant activation of the pIFG and aIPL. The lack of a signature of “mirror neuron activity” in the inferior frontoparietal cortex is presumably due to specific features of the task which may have favored stimulus–response mapping based on common spatial coding. We propose that the responsiveness of human frontoparietal mirror neuron areas to simple intransitive movements critically depends on the experimental context.

Clash of identities in South Florida: An examination of the complexity of racial and national identity and their impact on ethnic solidarity between black Americans and Jamaicans

Immigrants from the West Indies and other nations challenge the simple United States dichotomy of blacks versus whites. Many apparently black Caribbean immigrants proclaim that they did not know they were “black” until they arrived in the U.S. They seek to maintain their national identity and resist identity and solidarity with Black Americans. In response, many Black Americans respond that the immigrants are simply being naive, that U.S. society demands simple racial identity. Regardless of one's self-identity and personal history, in the U.S., if you look black, you are black, was their thinking. ^ This study examines the contemporary struggle of identity and solidarity among and between Black Americans and Jamaicans living in South Florida (Broward and Miami-Dade counties). Even though the primary focus of this study is to examine the relationship between Black Americans and Jamaicans, other West Indian nationals will be addressed more generally. The primary research problem of this study is to determine why the existence of common ancestry and physical traits are insufficient for an assumption of ethnic solidarity between Black Americans and Jamaicans. ^ In examining this problem, I felt that depth rather than breadth would provide insight into the current state of polarization between Black Americans and Jamaicans. To this end, a qualitative study was designed. A non-random snowball sample consisting of forty-seven informants was selected for this study. Realizing that such a technique presents problems with generalizations beyond the sample, this approach was, nonetheless, the most suitable for the current research problem. One of the initial challenges of this research was the use of the label “black” in discussing Caribbean immigrants. Unlike America, where distinctions based on skin color were at the bedrock of America's formation, this was not the case in the Caribbean. In the Caribbean skin color was an important marker as an indicator of class, rather than of race. Therefore, I refrained from using the label, “black Jamaicans,” but rather used Jamaicans throughout. ^

A model for continuous measurement of drilled shaft diameter during construction

Non-Destructive Testing (NDT) of deep foundations has become an integral part of the industry's standard manufacturing processes. It is not unusual for the evaluation of the integrity of the concrete to include the measurement of ultrasonic wave speeds. Numerous methods have been proposed that use the propagation speed of ultrasonic waves to check the integrity of concrete for drilled shaft foundations. All such methods evaluate the integrity of the concrete inside the cage and between the access tubes. The integrity of the concrete outside the cage remains to be considered to determine the location of the border between the concrete and the soil in order to obtain the diameter of the drilled shaft. It is also economic to devise a methodology to obtain the diameter of the drilled shaft using the Cross-Hole Sonic Logging system (CSL). Performing such a methodology using the CSL and following the CSL tests is performed and used to check the integrity of the inside concrete, thus allowing the determination of the drilled shaft diameter without having to set up another NDT device.^ This proposed new method is based on the installation of galvanized tubes outside the shaft across from each inside tube, and performing the CSL test between the inside and outside tubes. From the performed experimental work a model is developed to evaluate the relationship between the thickness of concrete and the ultrasonic wave properties using signal processing. The experimental results show that there is a direct correlation between concrete thicknesses outside the cage and maximum amplitude of the received signal obtained from frequency domain data. This study demonstrates how this new method to measuring the diameter of drilled shafts during construction using a NDT method overcomes the limitations of currently-used methods. ^ In the other part of study, a new method is proposed to visualize and quantify the extent and location of the defects. It is based on a color change in the frequency amplitude of the signal recorded by the receiver probe in the location of defects and it is called Frequency Tomography Analysis (FTA). Time-domain data is transferred to frequency-domain data of the signals propagated between tubes using Fast Fourier Transform (FFT). Then, distribution of the FTA will be evaluated. This method is employed after CSL has determined the high probability of an anomaly in a given area and is applied to improve location accuracy and to further characterize the feature. The technique has a very good resolution and clarifies the exact depth location of any void or defect through the length of the drilled shaft for the voids inside the cage. ^ The last part of study also evaluates the effect of voids inside and outside the reinforcement cage and corrosion in the longitudinal bars on the strength and axial load capacity of drilled shafts. The objective is to quantify the extent of loss in axial strength and stiffness of drilled shafts due to presence of different types of symmetric voids and corrosion throughout their lengths.^

Padrão epidemiológico das oclusopatias muito graves em adolescentes brasileiros

OBJECTIVE: To describe the distribution of malocclusion and its associated factors in Brazilian adolescents. METHODS: Data from 7,328 subjects aged 12 years and 5,445 adolescents aged 15-19 years were analyzed. The adolescents took part in the Brazilian Oral Health Survey (SBBrasil 2010). The outcome was severe malocclusion according to the dental aesthetic index. The independent variables were sex, skin color, monthly household income, possessions, number of individuals in the household, untreated dental caries, missing teeth and dental appointments or lack thereof, frequency, and reason. Logistical regression analysis was carried out, considering the complex sampling cluster design, based on a hierarchical model. RESULTS: The prevalence of severe malocclusion was 6.5% and 9.1% in the 12-year-olds and the 15-19-year-olds, respectively. After adjustment, those with lighter- skinned black or black skin were 1.59 (95%CI 1.08;2.34) times more likely to present the outcome compared with those with white skin. The loss of one or more first molars increased 2.66 (95%CI 1.26;5.63) the chance to present severe malocclusion by the age of 12. Adolescents aged 15-19 whose household income was below R$ 1,500.00 (OR 2.69 [95%CI 1.62; 4.47]) and those who had seen a dentist for treatment (OR 2.59 [95%CI 2.55;4.34]) had the greatest chance of having severe malocclusion compared with those with higher incomes and those who visited the dentist for prevention.

Que coisa é essa, Yôyô?: cor e raça na imprensa ilustrada da Bahia (1897-1904)

From techniques such as lithography and woodcut, it was possible to create and reproduce daily images in the newspapers of the Empire and the Republic of Brazil. The purpose of this study is to make a historiographic report, derived from a multidisciplinary theoretical analysis to which several printed visual documents were selected from the newspaper A Coisa from Salvador, in Bahia. The weekly news, edited in the capital and distributed also in the countryside of Bahia by the end of 1897 and the beginning of 1904 is rich for its illustrations and the satirical, humorous and critical content, signed by its editors. The images in A Coisa are appealing for their content filled with tensions inherent to the time of the First Republic in Brazil, such as issues regarding ones skin color, phenotypes, race, gender, the value and the social ranking of the black population. The paper, in its gathering of texts and images, is the main basis of this research corpus, in which a dialogue with other papers from other places and times is proposed so that it becomes evident the historical process that marks the ideal of nation and the construction of a body and an identity for the people of African Descent in Brazil. The observation and analysis of the selected images from the newspaper allow the identification of its way of production, the orientation of a reality in function of its target consumers, their authorship and the objectives to which it was created. Therefore, this work aims to critically analyze the representations given to the black body and skin, in order to problematize the memories of these bodies and their sociocultural meanings and, thus, question, through a methodology aimed to the description and analysis of images united to texts, these bodies visual representations possible contribution to the formation of an idea of black people unified identity, and their social alterity in deference to the memories given to the white society in the historical and social context of that time.

Mechanochemistry for Active Materials and Devices

The coupling of mechanical stress fields in polymers to covalent chemistry (polymer mechanochemistry) has provided access to previously unattainable chemical reactions and polymer transformations. In the bulk, mechanochemical activation has been used as the basis for new classes of stress-responsive polymers that demonstrate stress/strain sensing, shear-induced intermolecular reactivity for molecular level remodeling and self-strengthening, and the release of acids and other small molecules that are potentially capable of triggering further chemical response. The potential utility of polymer mechanochemistry in functional materials is limited, however, by the fact that to date, all reported covalent activation in the bulk occurs in concert with plastic yield and deformation, so that the structure of the activated object is vastly different from its nascent form. Mechanochemically activated materials have thus been limited to “single use” demonstrations, rather than as multi-functional materials for structural and/or device applications. Here, we report that filled polydimethylsiloxane (PDMS) elastomers provide a robust elastic substrate into which mechanophores can be embedded and activated under conditions from which the sample regains its original shape and properties. Fabrication is straightforward and easily accessible, providing access for the first time to objects and devices that either release or reversibly activate chemical functionality over hundreds of loading cycles.

While the mechanically accelerated ring-opening reaction of spiropyran to merocyanine and associated color change provides a useful method by which to image the molecular scale stress/strain distribution within a polymer, the magnitude of the forces necessary for activation had yet to be quantified. Here, we report single molecule force spectroscopy studies of two spiropyran isomers. Ring opening on the timescale of tens of milliseconds is found to require forces of ~240 pN, well below that of previously characterized covalent mechanophores. The lower threshold force is a combination of a low force-free activation energy and the fact that the change in rate with force (activation length) of each isomer is greater than that inferred in other systems. Importantly, quantifying the magnitude of forces required to activate individual spiropyran-based force-probes enables the probe behave as a “scout” of molecular forces in materials; the observed behavior of which can be extrapolated to predict the reactivity of potential mechanophores within a given material and deformation.

We subsequently translated the design platform to existing dynamic soft technologies to fabricate the first mechanochemically responsive devices; first, by remotely inducing dielectric patterning of an elastic substrate to produce assorted fluorescent patterns in concert with topological changes; and second, by adopting a soft robotic platform to produce a color change from the strains inherent to pneumatically actuated robotic motion. Shown herein, covalent polymer mechanochemistry provides a viable mechanism to convert the same mechanical potential energy used for actuation into value-added, constructive covalent chemical responses. The color change associated with actuation suggests opportunities for not only new color changing or camouflaging strategies, but also the possibility for simultaneous activation of latent chemistry (e.g., release of small molecules, change in mechanical properties, activation of catalysts, etc.) in soft robots. In addition, mechanochromic stress mapping in a functional actuating device might provide a useful design and optimization tool, revealing spatial and temporal force evolution within the actuator in a way that might also be coupled to feedback loops that allow autonomous, self-regulation of activity.

In the future, both the specific material and the general approach should be useful in enriching the responsive functionality of soft elastomeric materials and devices. We anticipate the development of new mechanophores that, like the materials, are reversibly and repeatedly activated, expanding the capabilities of soft, active devices and further permitting dynamic control over chemical reactivity that is otherwise inaccessible, each in response to a single remote signal.

Semantic feature-based visual attention model for pedestrian detection

Objective
Pedestrian detection under video surveillance systems has always been a hot topic in computer vision research. These systems are widely used in train stations, airports, large commercial plazas, and other public places. However, pedestrian detection remains difficult because of complex backgrounds. Given its development in recent years, the visual attention mechanism has attracted increasing attention in object detection and tracking research, and previous studies have achieved substantial progress and breakthroughs. We propose a novel pedestrian detection method based on the semantic features under the visual attention mechanism.
Method
The proposed semantic feature-based visual attention model is a spatial-temporal model that consists of two parts: the static visual attention model and the motion visual attention model. The static visual attention model in the spatial domain is constructed by combining bottom-up with top-down attention guidance. Based on the characteristics of pedestrians, the bottom-up visual attention model of Itti is improved by intensifying the orientation vectors of elementary visual features to make the visual saliency map suitable for pedestrian detection. In terms of pedestrian attributes, skin color is selected as a semantic feature for pedestrian detection. The regional and Gaussian models are adopted to construct the skin color model. Skin feature-based visual attention guidance is then proposed to complete the top-down process. The bottom-up and top-down visual attentions are linearly combined using the proper weights obtained from experiments to construct the static visual attention model in the spatial domain. The spatial-temporal visual attention model is then constructed via the motion features in the temporal domain. Based on the static visual attention model in the spatial domain, the frame difference method is combined with optical flowing to detect motion vectors. Filtering is applied to process the field of motion vectors. The saliency of motion vectors can be evaluated via motion entropy to make the selected motion feature more suitable for the spatial-temporal visual attention model.
Result
Standard datasets and practical videos are selected for the experiments. The experiments are performed on a MATLAB R2012a platform. The experimental results show that our spatial-temporal visual attention model demonstrates favorable robustness under various scenes, including indoor train station surveillance videos and outdoor scenes with swaying leaves. Our proposed model outperforms the visual attention model of Itti, the graph-based visual saliency model, the phase spectrum of quaternion Fourier transform model, and the motion channel model of Liu in terms of pedestrian detection. The proposed model achieves a 93% accuracy rate on the test video.
Conclusion
This paper proposes a novel pedestrian method based on the visual attention mechanism. A spatial-temporal visual attention model that uses low-level and semantic features is proposed to calculate the saliency map. Based on this model, the pedestrian targets can be detected through focus of attention shifts. The experimental results verify the effectiveness of the proposed attention model for detecting pedestrians.

Comparação da medida de cor de pescado entre sistema de visão computacional e colorímetro convencional no frescor do pescado

A cor da superfície dos alimentos é o primeiro parâmetro de qualidade avaliado pelos consumidores, e é critico para a aceitação do produto, então a medição adequada da cor é uma importante ferramenta. Nesta pesquisa avaliou-se a variação da cor em corvina (Micropogonias furnieri) armazenada em gelo durante 16 dias; os parâmetros de luminosidade (L*), valor cromático a*, valor cromático b*, variação total da cor (ΔE) e croma (C*) foram obtidos por sistema de visão computacional, e por colorímetro Konica Minolta CR-400. O frescor da corvina baseada nas mudanças da cor das brânquias foi avaliado utilizando um sistema de visão computacional. Também se modelou a oxidação da mioglobina em files de burriquete (Pogonias cromis), utilizando os parâmetros de vermelho (valor a* e R). Para registrar as mudanças da cor durante 57,6 h utilizou-se um sistema de visão computacional, a análise química realizou-se determinando a concentração de metamioglobina (%). Na avaliação da cor de corvina armazenada em gelo, o sistema de visão computacional mostrou diferenças significativas para L*, a*, ΔE e C*, enquanto que o colorímetro mostrou diferenças significativas para L* e ΔE, o único parâmetro que não apresentou diferenças entre instrumentos foi ΔE durante a avaliação da corvina armazenada em gelo. O coeficiente de correlação entre os parâmetros da cor (L*, a* e b*) das brânquias da corvina armazenada em gelo pelo tempo de armazenamento foi de 0,9747. O sistema de visão computacional registrou as mudanças da cor em filés de burriquete e se modelaram as mudanças utilizando um modelo exponencial. O sistema de visão computacional mostrou ser mais sensível às mudanças da cor durante a avaliação da cor na corvina armazenada em gelo. É possível prognosticar o tempo de armazenamento da corvina em gelo em função da mudança da cor das brânquias. Assim, foi possível modelar a variação da mioglobina em filés de burriquete utilizando sistemas de visão computacional para registrar ditas mudanças. Os sistemas de visão computacional têm grande capacidade para registrar as mudanças da cor e é possível utiliza-los para avaliar os alimentos em função da cor.

Postharvest treatment effects on 'B74' mango fruit lenticel discolouration after irradiation

Lenticel discolouration (LD) is a common disorder of mango fruit around the world. It results in poor appearance and disappointment of consumers. LD is exacerbated by treatment of mango fruit with gamma irradiation for insect disinfestation. The issue is problematic on the relatively new mango cultivar 'B74' and may represent an oxidative browning process. With a view to reducing irradiationinduced LD on 'B74', postharvest wax (one and three layers; 75% carnauba wax) and antioxidant (100 mM ascorbic acid, 100 mM calcium chloride, 10, 50 and 100 mM calcium ascorbate) dip treatments were investigated. Treatment of green mature fruit with three layers of wax prior to exposure to 557 Gy gamma irradiation reduced LD by 40% relative to the non-waxed control. However, the fruit failed to ripen properly as evidenced by delayed skin colour change, retarded softening and increased skin browning as compared to the controls and fruit coated with one layer of wax. Treatment with one layer of wax did not reduce LD. Mechanistically, the responses suggest that air exchange plays a pivotal role in LD. A lowered oxygen concentration in the lenticels may reduce the disorder after irradiation treatment. Postharvest treatments with the various antioxidants failed to reduce LD. Rather, all antioxidant treatments at the test concentrations, except calcium chloride, significantly increased skin browning.

Efeito da adição dos azocorantes DR73 e DB79 nas propriedades do poli(metacrilato de metila)

Currently new polymeric materials have been developed to replace other of traditionally materials classes. The use of dyes allows to expand and to diversify the applications in the polymeric materials development. In this work the behavior and ability of azo dyes Disperse Blue 79 (DB79) and Disperse Red 73 (DR73) on poly(methyl methacrylate) (PMMA) were studied. Two types of mixtures were used in the production of masterbatches: 1) rheometer 2) solution. Processing by extrusion-blow molding of PMMA was carried out in order to evaluate the applications of polymeric films. Thermal analysis were performed by thermogravimetry to evaluate polymer and azo dyes thermal stability. Colorimetric analysis were obtained through monitoring the spectral variations associated with sys/trans/anti azo dyes isomerization process Colorimetric data were treated and evaluated in accordance to the color system RGB and CIEL*ab, by monitoring the color change as function of time. Mechanical properties, characterized by tensile tests, were evaluated and correlated with the presence and content of azo dyes in the samples. Analyses by scanning electronic microscopy (SEM) were performed on the surfaces of samples to check the azo dye dispersion after the mixing process. It was concluded that the production of PMMA/azo dyes is possible and feasible, and the mixtures produced had synergy of properties for use in various applications

Changes in physical and chemical parameters of the traditional portuguese product água-mel during the production process

Changes in physical and chemical parameters (viscosity, total soluble solids and Hunter color parameters L*, a*, b*, chroma and hue angle) of água-mel were investigated throughout processing. Kinetic parameters for color change of heatprocessed água-mel were monitored. A zero-order kinetic model was applied to changes in L* and b*, while a* and C* were described using a first-order kinetic model. The heating process changed all three color parameters (L*, a*, b*), causing a shift toward the darker colors. Parameters L* decreased, while a*, b*, C* and hue angle (°h) increased during heating. Regarding changes in total soluble solids and in apparent viscosity, both fitted first-order kinetics. A direct relationship was found between the changes in these two parameters. The increase in both total soluble solids and viscosity affected a*, b* and C*. In addition, a flow diagram for the Portuguese água-mel production process has been established.

Efeito de argilas organofílicas na estrutura e propriedades de nanocompósitos de poli(metacrilato de metila)

Nacomposites of polymers and lamellar clayminerals, has generated high scientific and technological interest, for having mechanical properties and gas barriers differentiated of polymers and conventional composites. In this work, it was developed nanocomposites by single screw extruder and injection, utilizing commercial raw material, with the goal to investigate the quality of new developed materials. It was evaluated the influence of the content and the kind of clay in the structure and in the nanocomposites properties. It was used regular and elastomeric poly (methyl methacrylate) (Acrigel LEP 100 and Acrigel ECP800) and six montmorillonites (Cloisite 10A, 11B, 15A, 20A, 25A e 30B) at the concentration of 1% e 3% in weight. The nanocomposites were characterized by X-ray diffraction (XRD), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), colorimetric, optical transparency, flexural and tensile tests, Rockwell hardness and esclerometry. It was founded that is possible to obtain intercalated and exfoliated nanocomposites PMMA/MMT, and the top results was obtained in the materials with 1%in clay weight organophilizated with 2M2HT (Cloisite 15A and 20A) presented intercalate and hybrid morphology (exfoliated and flocullated). The ones that was produced with organophilizated clay with 2MHTL8 (Cloisite 30B) had excellent visual quality, but the majority presented hybrid morphology. In the materials processed with organophilizated clay with MT2ETOH (Cloisite 30B), there were color change and loss of transparency. It occurs improvement in a few mechanical properties, mainly in the materials produced with PMMA elastomeric (Acrigel ECP800), being more significant, the increase in the resistance to stripping in those nanocomposites

A Model for Continuous Measurement of Drilled Shaft Diameter During Construction

Non-Destructive Testing (NDT) of deep foundations has become an integral part of the industry’s standard manufacturing processes. It is not unusual for the evaluation of the integrity of the concrete to include the measurement of ultrasonic wave speeds. Numerous methods have been proposed that use the propagation speed of ultrasonic waves to check the integrity of concrete for drilled shaft foundations. All such methods evaluate the integrity of the concrete inside the cage and between the access tubes. The integrity of the concrete outside the cage remains to be considered to determine the location of the border between the concrete and the soil in order to obtain the diameter of the drilled shaft. It is also economic to devise a methodology to obtain the diameter of the drilled shaft using the Cross-Hole Sonic Logging system (CSL). Performing such a methodology using the CSL and following the CSL tests is performed and used to check the integrity of the inside concrete, thus allowing the determination of the drilled shaft diameter without having to set up another NDT device. This proposed new method is based on the installation of galvanized tubes outside the shaft across from each inside tube, and performing the CSL test between the inside and outside tubes. From the performed experimental work a model is developed to evaluate the relationship between the thickness of concrete and the ultrasonic wave properties using signal processing. The experimental results show that there is a direct correlation between concrete thicknesses outside the cage and maximum amplitude of the received signal obtained from frequency domain data. This study demonstrates how this new method to measuring the diameter of drilled shafts during construction using a NDT method overcomes the limitations of currently-used methods. In the other part of study, a new method is proposed to visualize and quantify the extent and location of the defects. It is based on a color change in the frequency amplitude of the signal recorded by the receiver probe in the location of defects and it is called Frequency Tomography Analysis (FTA). Time-domain data is transferred to frequency-domain data of the signals propagated between tubes using Fast Fourier Transform (FFT). Then, distribution of the FTA will be evaluated. This method is employed after CSL has determined the high probability of an anomaly in a given area and is applied to improve location accuracy and to further characterize the feature. The technique has a very good resolution and clarifies the exact depth location of any void or defect through the length of the drilled shaft for the voids inside the cage. The last part of study also evaluates the effect of voids inside and outside the reinforcement cage and corrosion in the longitudinal bars on the strength and axial load capacity of drilled shafts. The objective is to quantify the extent of loss in axial strength and stiffness of drilled shafts due to presence of different types of symmetric voids and corrosion throughout their lengths.

Branqueamento dentário

A estética dentária tem recebido bastante enfoque nos últimos anos, particularmente devido à importância a que a população atribui à aparência estética do sorriso. É, assim, desejado um sorriso o mais branco possível e que de preferência seja fácil de obter, eficaz, rápido, económico e que seja o menos invasivo possível. No entanto, muitos pacientes apresentam frequentemente dentes com cor alterada, comprometendo desta forma a estética do sorriso. O branqueamento dentário é uma técnica não invasiva, conservadora que não altera a forma natural do dente, e que permite alterações estéticas consideráveis. A procura de uma melhoria estética a todos os níveis, leva a que o Branqueamento dentário se apresente hoje como método de eleição para a remoção da pigmentação dentária. Recorre-se assim a substâncias oxidantes, que na maioria dos casos têm origem no Peróxido de Hidrogénio (H2O2). Um dos efeitos secundários ao Branqueamento, prende-se com a sensibilidade dentária, sendo que esta pode originar algum desconforto ou mesmo ser condicionante para a não realização ou término do tratamento. Para se atingir sucesso num tratamento branqueador é da maior importância o diagnóstico preciso da etiologia da alteração de cor, por isso uma anamnese detalhada e um exame clínico e dentário são da maior importância para se poder aconselhar o paciente pelo melhor tratamento a adotar. O objetivo deste trabalho foi avaliar a informação científica disponível sobre as técnicas disponíveis para realizar branqueamento dentário, vantagens e desvantagens de cada técnica, agentes branqueadores utilizados, mecanismos de ação e os seus efeitos adversos. Para tal foi efetuada uma pesquisa nas bases de dados PubMed e B-On de artigos publicados entre 2006-2016 com as seguintes palavras-chave: dental bleaching, teeth whitening, peroxides, branqueamento dentário, clareamento dentário. O branqueamento dentário, apresenta algumas limitações e contra-indicações, assim como vários efeitos adversos, que devem ser do conhecimento do Médico para este poder intervir devidamente. Foi percetível que um tratamento branqueador depende de inúmeros fatores e que a forma de atuação do profissional é tão importante para o sucesso do tratamento como o tipo de agente branqueador utilizado.