Identification of Small Signal Oscillation Mode Parameters from Simulated and Actual PMU Ringdown Data

This paper presents the practical use of Prony Analysis to identify small signal oscillation mode parameters from simulated and actual phasor measurement unit (PMU) ringdown data. A well-known two-area four-machine power system was considered as a study case while the latest PMU ringdown data were collected from a double circuit 275 kV main interconnector on the Irish power system. The eigenvalue analysis and power spectral density were also conducted for the purpose of comparison. The capability of Prony Analysis to identify the mode parameters from three different types of simulated PMU ringdown data has been shown successfully. Furthermore, the results indicate that the Irish power system has dominant frequency modes at different frequencies. However, each mode has good system damping.

Corrosion Fatigue Behaviour of Laser-welded Shape Memory NiTi Wires in a Simulated Body Fluid

Corrosion fatigue is a fracture process as a consequence of synergistic interactions between the material structure, corrosive environment and cyclic loads/strains. It is difficult to be detected and can cause unexpected failure of engineering components in use. This study reveals a comparison of corrosion fatigue behaviour of laser-welded and bare NiTi wires using bending rotation fatigue (BRF) test coupled with a specifically-designed corrosion cell. The testing medium was Hanks’ solution (simulated body fluid) at 37.5 oC. Electrochemical impedance spectroscopic (EIS) measurement was carried out to monitor the change of corrosion resistance of sample during the BRF test at different periods of time. Experiments indicate that the laser-welded NiTi wire would be more susceptible to the corrosion fatigue attack than the bare NiTi wire. This study can serve as a benchmark for the product designers and engineers to understand the corrosion fatigue behaviour of the NiTi laser weld joint and determine the fatigue life safety factor for NiTi medical devices/implants involving laser welding in the fabrication process.

The effect of carbohydrate mouth rinsing on fencing performance and cognitive function following a fatigue inducing simulated bout of fencing in national level foil fencers

Delivered at The Physiological Society's Biomedical Basis of Elite Performance conference, Nottingham, 6-8 March 2016

Interaction Rituals and Jumbled Emotions Among “Relative Strangers”: Simulated Patient Work on a Trainee Complementary Therapy Practitioner Program

Learning games such as role-play (which we refer to as “simulated interaction rituals”) are commonly used as social tools to develop trainee health practitioners. However, the effect of such rituals on individual and group participant emotions has not been carefully studied. Using a heuristic approach, we explore the experiences of complementary therapy practitioner trainees (and their trainers) participating in a personal development course. Ten trainees and two tutors were interviewed, observational notes taken, and a secondary qualitative analysis undertaken. Participants and tutors described a medley of disparate emotional and moral responses to group rituals, conceptualized in this article as “jumbled emotions.” Such emotions required disentangling, and both trainees and staff perceived participating in unfamiliar rituals “with relative strangers” as challenging. Front of stage effects are frequently processed “backstage,” as rituals threaten social embarrassment and confusion. Concerns around emotional triggers, authenticity, and outcomes of rituals arise at the time, yet trainees can find ways to work through these issues in time.

Argonauta Video Database: General simulated scenes. Scene 1 (Right camera)

General simulated scenes These scenes followed a pre-defined script (see the Thesis for details), with common movements corresponding to general experiments. People go to or stand still in front of "J9", and/or go to the side of Argonauta reactor and come back again. The first type of movement is common during Irradiation experiments, where a material sample is put within the "J9" channel; and also during neutrongraphy or gammagraphy experiments, where a sample is placed in front of "J9". Here, the detailed movements of putting samples on these places were not reproduced in details, but only the whole bodies' movements were simulated (as crouching or being still in front of "J9"). The second type of movement may occur when operators go to the side of Argonauta to verify some operational condition. - Scene 1 (Obs.: Scene 1 of the "General simulated scenes" class): Comprises one of the scenes with two persons. Both of them use clothes of light colors. Both persons remain still in front of "J9"; one goes to the computer and then come back, and both go out. Video file labels: "20140326145315_IPCAM": recorded by the right camera,

Argonauta Video Database: General Simulated. Scene 1 (Left Camera)

General simulated scenes These scenes followed a pre-defined script (see the Thesis for details), with common movements corresponding to general experiments. People go to or stand still in front of "J9", and/or go to the side of Argonauta reactor and come back again. The first type of movement is common during Irradiation experiments, where a material sample is put within the "J9" channel; and also during neutrongraphy or gammagraphy experiments, where a sample is placed in front of "J9". Here, the detailed movements of putting samples on these places were not reproduced in details, but only the whole bodies' movements were simulated (as crouching or being still in front of "J9"). The second type of movement may occur when operators go to the side of Argonauta to verify some operational condition. - Scene 1 (Obs.: Scene 1 of the "General simulated scenes" class): Comprises one of the scenes with two persons. Both of them use clothes of light colors. Both persons remain still in front of "J9"; one goes to the computer and then come back, and both go out. Video file labels: "20140326145316_IPCAM": recorded by the left camera.

Argonauta Video Database: General simulated. Scene 2 (Right camera)

General simulated scenes These scenes followed a pre-defined script (see the Thesis for details), with common movements corresponding to general experiments. People go to or stand still in front of "J9", and/or go to the side of Argonauta reactor and come back again. The first type of movement is common during Irradiation experiments, where a material sample is put within the "J9" channel; and also during neutrongraphy or gammagraphy experiments, where a sample is placed in front of "J9". Here, the detailed movements of putting samples on these places were not reproduced in details, but only the whole bodies' movements were simulated (as crouching or being still in front of "J9"). The second type of movement may occur when operators go to the side of Argonauta to verify some operational condition. - Scene 2: Comprises one of the scenes with two persons. Both of them use clothes of dark colors. Both persons go to the side of Argonauta reactor and then come back and go out. Video file labels: "20140326154754_IPCAM": recorded by the right camera.

Argonauta Video Database: General simulated. Scene 2 (Left camera)

General simulated scenes These scenes followed a pre-defined script (see the Thesis for details), with common movements corresponding to general experiments. People go to or stand still in front of "J9", and/or go to the side of Argonauta reactor and come back again. The first type of movement is common during Irradiation experiments, where a material sample is put within the "J9" channel; and also during neutrongraphy or gammagraphy experiments, where a sample is placed in front of "J9". Here, the detailed movements of putting samples on these places were not reproduced in details, but only the whole bodies' movements were simulated (as crouching or being still in front of "J9"). The second type of movement may occur when operators go to the side of Argonauta to verify some operational condition. - Scene 2: Comprises one of the scenes with two persons. Both of them use clothes of dark colors. Both persons go to the side of Argonauta reactor and then come back and go out. Video file labels: "20140326154755_IPCAM": recorded by the left camera.

Intelligent decision making in electricity markets: simulated annealing Q-Learning

Electricity markets are complex environments, involving a large number of different entities, playing in a dynamic scene to obtain the best advantages and profits. MASCEM is a multi-agent electricity market simulator to model market players and simulate their operation in the market. Market players are entities with specific characteristics and objectives, making their decisions and interacting with other players. MASCEM is integrated with ALBidS, a system that provides several dynamic strategies for agents’ behavior. This paper presents a method that aims at enhancing ALBidS competence in endowing market players with adequate strategic bidding capabilities, allowing them to obtain the higher possible gains out of the market. This method uses a reinforcement learning algorithm to learn from experience how to choose the best from a set of possible actions. These actions are defined accordingly to the most probable points of bidding success. With the purpose of accelerating the convergence process, a simulated annealing based algorithm is included.

Intelligent electric vehicle heuristic for energy resource management using simulated annealing

The smart grid concept appears as a suitable solution to guarantee the power system operation in the new electricity paradigm with electricity markets and integration of large amounts of Distributed Energy Resources (DERs). Virtual Power Player (VPP) will have a significant importance in the management of a smart grid. In the context of this new paradigm, Electric Vehicles (EVs) rise as a good available resource to be used as a DER by a VPP. This paper presents the application of the Simulated Annealing (SA) technique to solve the Energy Resource Management (ERM) of a VPP. It is also presented a new heuristic approach to intelligently handle the charge and discharge of the EVs. This heuristic process is incorporated in the SA technique, in order to improve the results of the ERM. The case study shows the results of the ERM for a 33-bus distribution network with three different EVs penetration levels, i. e., with 1000, 2000 and 3000 EVs. The results of the proposed adaptation of the SA technique are compared with a previous SA version and a deterministic technique.

Intelligent energy resource management considering vehicle-to-grid: A simulated annealing approach

This paper proposes a simulated annealing (SA) approach to address energy resources management from the point of view of a virtual power player (VPP) operating in a smart grid. Distributed generation, demand response, and gridable vehicles are intelligently managed on a multiperiod basis according to V2G user´s profiles and requirements. Apart from using the aggregated resources, the VPP can also purchase additional energy from a set of external suppliers. The paper includes a case study for a 33 bus distribution network with 66 generators, 32 loads, and 1000 gridable vehicles. The results of the SA approach are compared with a methodology based on mixed-integer nonlinear programming. A variation of this method, using ac load flow, is also used and the results are compared with the SA solution using network simulation. The proposed SA approach proved to be able to obtain good solutions in low execution times, providing VPPs with suitable decision support for the management of a large number of distributed resources.

Simulated annealing metaheuristic to solve the optimal power flow

The optimal power flow problem has been widely studied in order to improve power systems operation and planning. For real power systems, the problem is formulated as a non-linear and as a large combinatorial problem. The first approaches used to solve this problem were based on mathematical methods which required huge computational efforts. Lately, artificial intelligence techniques, such as metaheuristics based on biological processes, were adopted. Metaheuristics require lower computational resources, which is a clear advantage for addressing the problem in large power systems. This paper proposes a methodology to solve optimal power flow on economic dispatch context using a Simulated Annealing algorithm inspired on the cooling temperature process seen in metallurgy. The main contribution of the proposed method is the specific neighborhood generation according to the optimal power flow problem characteristics. The proposed methodology has been tested with IEEE 6 bus and 30 bus networks. The obtained results are compared with other wellknown methodologies presented in the literature, showing the effectiveness of the proposed method.