Estimación del consumo de potencia en un terminal portátil multimedia basada en la PMU del procesador

Este proyecto se incluye en una línea de trabajo que tiene como objetivo final la optimización de la energía consumida por un dispositivo portátil multimedia mediante la aplicación de técnicas de control realimentado, a partir de una modificación dinámica de la frecuencia de trabajo del procesador y de su tensión de alimentación. La modificación de frecuencia y tensión se realiza a partir de la información de realimentación acerca de la potencia consumida por el dispositivo, lo que supone un problema ya que no suele ser posible la monitorización del consumo de potencia en dispositivos de estas características. Este es el motivo por el que se recurre a la estimación del consumo de potencia, utilizando para ello un modelo de predicción. A partir del número de veces que se producen ciertos eventos en el procesador del dispositivo, el modelo de predicción es capaz de obtener una estimación de la potencia consumida por dicho dispositivo. El trabajo llevado a cabo en este proyecto se centra en la implementación de un modelo de estimación de potencia en el kernel de Linux. La razón por la que la estimación se implementa en el sistema operativo es, en primer lugar para lograr un acceso directo a los contadores del procesador. En segundo lugar, para facilitar la modificación de frecuencia y tensión, una vez obtenida la estimación de potencia, ya que esta también se realiza desde el sistema operativo. Otro motivo para implementar la estimación en el sistema operativo, es que la estimación debe ser independiente de las aplicaciones de usuario. Además, el proceso de estimación se realiza de forma periódica, lo que sería difícil de lograr si no se trabajase desde el sistema operativo. Es imprescindible que la estimación se haga de forma periódica ya que al ser dinámica la modificación de frecuencia y tensión que se pretende implementar, se necesita conocer el consumo de potencia del dispositivo en todo momento. Cabe destacar también, que los algoritmos de control se tienen que diseñar sobre un patrón periódico de actuación. El modelo de estimación de potencia funciona de manera específica para el perfil de consumo generado por una única aplicación determinada, que en este caso es un decodificador de vídeo. Sin embargo, es necesario que funcione de la forma más precisa posible para cada una de las frecuencias de trabajo del procesador, y para el mayor número posible de secuencias de vídeo. Esto es debido a que las sucesivas estimaciones de potencia se pretenden utilizar para llevar a cabo la modificación dinámica de frecuencia, por lo que el modelo debe ser capaz de continuar realizando las estimaciones independientemente de la frecuencia con la que esté trabajando el dispositivo. Para valorar la precisión del modelo de estimación se toman medidas de la potencia consumida por el dispositivo a las distintas frecuencias de trabajo durante la ejecución del decodificador de vídeo. Estas medidas se comparan con las estimaciones de potencia obtenidas durante esas mismas ejecuciones, obteniendo de esta forma el error de predicción cometido por el modelo y realizando las modificaciones y ajustes oportunos en el mismo. ABSTRACT. This project is included in a work line which tries to optimize consumption of handheld multimedia devices by the application of feedback control techniques, from a dynamic modification of the processor work frequency and its voltage. The frequency and voltage modification is performed depending on the feedback information about the device power consumption. This is a problem because normally it is not possible to monitor the power consumption on this kind of devices. This is the reason why a power consumption estimation is used instead, which is obtained from a prediction model. Using the number of times some events occur on the device processor, the prediction model is able to obtain a power consumption estimation of this device. The work done in this project focuses on the implementation of a power estimation model in the Linux kernel. The main reason to implement the estimation in the operating system is to achieve a direct access to the processor counters. The second reason is to facilitate the frequency and voltage modification, because this modification is also done from the operating system. Another reason to implement the estimation in the operating system is because the estimation must be done apart of the user applications. Moreover, the estimation process is done periodically, what is difficult to obtain outside the operating system. It is necessary to make the estimation in a periodic way because the frequency and voltage modification is going to be dynamic, so it needs to know the device power consumption at every time. Also, it is important to say that the control algorithms have to be designed over a periodic pattern of action. The power estimation model works specifically for the consumption profile generated by a single application, which in this case is a video decoder. Nevertheless, it is necessary that the model works as accurate as possible for each frequency available on the processor, and for the greatest number of video sequences. This is because the power estimations are going to be used to modify dynamically the frequency, so the model must be able to work independently of the device frequency. To value the estimation model precision, some measurements of the device power consumption are taken at different frequencies during the video decoder execution. These measurements are compared with the power estimations obtained during that execution, getting the prediction error committed by the model, and if it is necessary, making modifications and settings on this model.

Virtualización de laboratorios

Para empezar, se ha hecho un análisis de las diferentes posibilidades que se podían implementar para poder conseguir el objetivo del trabajo. El resultado final debe ser, disponer de máquinas para que el sistema operativo fuese independiente del hardware que se tiene instalado en él . Para ello, se decide montar un sistema operativo de base en todos los equipos del laboratorio, que tenga las necesidades mínimas que se necesitan, las cuales son una interfaz gráfica y conexión de red. Hay que intentar reducir el consumo de recursos al máximo con este sistema operativo mínimo para que el rendimiento de las máquinas sea lo más fluido posible para los usuarios. El sistema elegido fue Linux con su distribución Ubuntu [ubu, http] con los módulos mínimos que permita funcionar el software necesario. Una vez se instala el sistema operativo anfitrión, se instala el escritorio Xfce [ubu2, http], que es el más ligero de Ubuntu, pero que proporciona buen rendimiento. Después, se procedió a instalar un software de virtualización en cada equipo. En este caso se decidió, por las buenas prestaciones que ofrecía, que fuera VirtualBox [vir2,http] de Oracle. Sobre éste software se crean tantas máquinas virtuales (con sistema operativo Windows) como asignaturas diferentes se cursan en el laboratorio donde se trabaje. Con esto, se consigue que al arrancar el programa los alumnos pudieran escoger qué máquina arrancar y lo que es más importante, se permite realizar cualquier cambio en el hardware (exceptuando el disco duro porque borraría todo lo que se tuviera guardado). Además de no tener que volver a reinstalar el sistema operativo nuevamente, se consigue la abstracción del software y hardware. También se decide que, para tener un respaldo de las máquinas virtuales que se tengan creadas en VirtualBox, se utiliza un servidor NAS. Uno de los motivos de utilizar dicho servidor fue por aprovechar una infraestructura ya creada. Un servidor NAS da la posibilidad de recuperar cualquier archivo (máquina virtual) cuando haga falta porque haya alguna máquina virtual corrupta en algún equipo, o en varios. Este tipo de servidor tiene la gran ventaja de ser multicast, es decir, permite solicitudes simultáneas. ABSTRACT For starters, there has been an analysis of the different possibilities that could be implemented to achieve the objective of the work. This objective was to have machines for the operating system to be independent of the hardware we have installed on it. Therefore, we decided to create an operating system based on all computers in the laboratory, taking the minimum needs we need. This is a graphical interface and network connection. We must try to reduce the consumption of resources to the maximum for the performance of the machines is as fluid as possible for users. The system was chosen with its Ubuntu Linux distribution with minimum modules that allow us to run software that is necessary for us. Once the base is installed, we install the Xfce desktop, which is the lightest of Ubuntu, but which provided good performance. Then we proceeded to install a virtualization software on each computer. In this case we decided, for good performance that gave us, it was Oracle VirtualBox. About this software create many virtual machines (Windows operating system) as different subjects are studied in the laboratory where we are. With that, we got it at program startup students could choose which machine start and what is more important, allowed us to make any changes to the hardware (except the hard drive because it would erase all we have). Besides not having to reinstall the operating system again, we get the software and hardware abstraction. We also decided that in order to have a backup of our virtual machines that we created in VirtualBox, we use a NAS server. One reason to use that server was to leverage their existing network infrastructure. A NAS server gives us the ability to retrieve any file (image) when we do need because there is some corrupt virtual machine in a team, or several. This is possible because this type of server allows multicast connection.

Gestión dinámica de redes de sensores y actuadores

Este proyecto fin de carrera tiene como finalidad el diseño y la implementación de un sistema de monitorización y gestión dinámica de redes de sensores y actuadores inalámbricos (Wireless Sensor and Actuator Networks – WSAN) en base a la información de configuración almacenada en una base de datos sobre la cual un motor de detección vigila posibles cambios. Este motor informará de los cambios a la herramienta de gestión y monitorización de la WSAN para que sean llevados a cabo en la red desplegada. Este trabajo se enmarca en otro más amplio cuya finalidad es la demostración de la posibilidad de reconfigurar dinámicamente una WSAN utilizando los mecanismos propios de las Líneas de Productos Software Dinámicos (DSPL, por sus siglas en inglés). Se ha diseñado e implementado el software que proporciona los métodos necesarios para la comunicación y actuación sobre la red de sensores y actuadores inalámbricos, además de permitir el control de cada uno de los dispositivos pertenecientes a dicha red y que los dispositivos se incorporen a dicha red de manera autónoma. El desarrollo y pruebas de este proyecto fin de carrera se ha realizado utilizando una máquina virtual sobre la que se ha configurado convenientemente una plataforma que incluye un emulador de red de sensores y actuadores de tecnología SunSpot (Solarium) y todas las herramientas de desarrollo y ejecución necesarias (entre ellas, SunSpot SDK 6.0 y NetBeans). Esta máquina virtual ejecuta un sistema operativo Unix (Ubuntu Server 12.4) y facilita el rápido despliegue de las herramientas implementadas así como la integración de las mismas en desarrollos más amplios. En esta memoria se describe todo el proceso de diseño e implementación del software desarrollado, las conclusiones obtenidas de su ejecución y una guía de usuario para su despliegue y manejo. ABSTRACT. The aim of this project is the design and implementation of a system to monitor and dynamically manage a wireless sensor and actuator network (WSAN) in consistence with the configuration information stored in a database whose changes are monitored by a so-called monitoring engine. This engine informs the management and monitoring tool about the changes, in order for these to be carried out on the deployed network. This project is a part of a broader one aimed at demonstrating the ability to dynamically reconfigure a WSAN using the mechanisms of the Dynamic Software Product Lines (DSPL). A software has been designed and implemented which provides the methods to communicate with and actuate on the WSAN. It also allows to control each of the devices, as well as their autonomous incorporation to the network. Development and testing of this project was done using a virtual machine that has a conveniently configured platform which includes a SunSpot technology WSAN emulator (Solarium) as well as all the necessary development and implementation tools (including SunSpot 6.0 SDK and NetBeans). This virtual machine runs a Unix (Ubuntu Server 12.4) operating system and makes it easy to rapidly deploy the implemented tools and to integrate them into broader developments. This document explains the whole process of designing and implementing the software, the conclusions of execution and a user's manual.

Análisis de reflectores en MatLab

Sabor, Software de Análisis de BOcinas y Reflectores, es una herramienta didáctica la cual es utilizada en los laboratorios de la escuela para realizar prácticas de la asignatura Antenas y Compatibilidad Electromagnética, esta herramienta da a los alumnos una visión gráfica de lo que se enseña en clase de teoría de lo que son los campos en las aperturas de los reflectores. El proyector pretende sustituir al primer Sabor , ya que se queda obsoleto debido al sistema operativo, ya que funciona solo para Windows XP y con ordenadores de 32 bits, y también realizar mejoras y corregir errores de la versión anterior. El proyecto se ha desarrollado en Matlab que es un software matemático con grandes ventajas en cuanto a cálculo, desarrollo gráfico, y a la creación de nuevos algoritmos en su propio lenguaje y además está disponible para las plataformas Unix, Windows, Mac OSX y GNU/Linux. El objetivo del proyecto ha sido implementar, al igual que las versiones anteriores, cinco tipos de reflectores, como son: Parabólico, Offset, Cassegrain y los dos Dobles Offset, Cassegrain y Gregorian, y han sido analizados con un alimentador ideal ,cos-q, y por último los resultados obtenidos se han comparado con las versiones anteriores de Sabor, como son Sabor 3.0 y el primer Sabor. El proyecto consta de partes muy bien diferencias como son :  La interpretación correctas de las formulas que se han utilizado para la realización de este proyecto ,dichas formulas han sido las dadas por el proyecto fin de carrera titulado Sabor3.0 de Francisco Egea Castejón.  GUIDE, the graphical user interface development environment, con el que se creó: GUI, graphical user interface, que es la parte de Matlab dedicada a crear interfaces de usuario , herramienta utilizada para crear nuestras distintas ventanas dedicadas para la obtención de datos para analizar los distintos reflectores y para mostrar por pantalla los distintos resultados.  Programación Orientada a Objetos de Matlab y sus distintas propiedades como son la herencia lo cual es muy útil para ocupar menos memoria ya que con un único método podemos realizar distintos cálculos con los distintos reflectores, objetos, solo cambiando las propiedades de cada objeto  Y por último ha sido la realización de validación de los resultados con la ayuda de las versiones anteriores de Sabor, que están detallados en el capítulo 5 y la unión con bocinas del proyecto fin de carrera Análisis de Bocinas en Matlab de Javier Montero. Por otra parte tenemos las mejoras realizadas a las antiguas versiones como son: realización de registros que el usuario puede guardar y cargar con las distintas variables, también se ha realizado un fichero .txt en el que consta la amplitud del campo con su respectiva theta para que el usuario pueda visualizarlo en cualquier plataforma gráfica de datos como por ejemplo exel. ABSTRACT. Sabor, Software de Análisis de BOcinas y Reflectores, is a teaching tool, which is used to do laboratory practice in the subject of Antennas y Compatibilidad Electromagnética, this tool gives students a graphic view of the knowledge that are given in theory class in regard to aperture field of reflectors. This project intend to replace the first Sabor, because it is outdated, due to the operating system, because Sabor works only with Widows XP and computer with 32 bits, and to make improves and correct errors that were detected in the last version of Sabor too. This project has been carried out in Matlab, which is a mathematical software with high-level language for numerical computation, visualization and application development, and furthermore it is available to different platforms such as Unix, Windows ,Mac OSX and GNU/Linux This project has focused on implementing, the same as last versions, five kind of reflectors, such as : Parabolic, Offset, Cassegrain and two offset dual reflector Cassegrain y Gregorian ,and these were analysed with a cos-q ideal feed, and finally the results were checked with the versions of Sabor, as well as Sabor 3.0 and the first Sabor. This project consist of four parts:  The correct interpretation of the formulas , which were used to do this project, from the final project Sabor3.0 by Francisco Egea Castejón.  GUIDE, the graphical user interface development environment, tool that was used to create : GUI, graphical user interface, part of Matlab dedicated to create user interface.  Object Oriented Programming of Matlab and different properties like inheritance, that is very useful for saving memory space because with only one method we can analyse different kind of reflectors, object, only change the properties of the object.  At finally, the results were contrasted with the results from the previous versions and the link reflectors with horns from the final project Análisis de Bocinas en Matlab by Javier Montero. On the other hand, we have the improvements such as: registers and .txt file. The registers are used by user to save and load different variables and .txt file is useful because it allows to the user plotting in different platforms for example exel.

Arquitetura computacional para redes orgânicas e heterogêneas: plano de controle do sistema operacional swarm.

Computational Swarms (enxames computacionais), consistindo da integração de sensores e atuadores inteligentes no nosso mundo conectado, possibilitam uma extensão da info-esfera no mundo físico. Nós chamamos esta info-esfera extendida, cíber-física, de Swarm. Este trabalho propõe uma visão de Swarm onde dispositivos computacionais cooperam dinâmica e oportunisticamente, gerando redes orgânicas e heterogêneas. A tese apresenta uma arquitetura computacional do Plano de Controle do Sistema Operacional do Swarm, que é uma camada de software distribuída embarcada em todos os dispositivos que fazem parte do Swarm, responsável por gerenciar recursos, definindo atores, como descrever e utilizar serviços e recursos (como divulgá-los e descobrí-los, como realizar transações, adaptações de conteúdos e cooperação multiagentes). O projeto da arquitetura foi iniciado com uma revisão da caracterização do conceito de Swarm, revisitando a definição de termos e estabelecendo uma terminologia para ser utilizada. Requisitos e desafios foram identificados e uma visão operacional foi proposta. Esta visão operacional foi exercitada com casos de uso e os elementos arquiteturais foram extraídos dela e organizados em uma arquitetura. A arquitetura foi testada com os casos de uso, gerando revisões do sistema. Cada um dos elementos arquiteturais requereram revisões do estado da arte. Uma prova de conceito do Plano de Controle foi implementada e uma demonstração foi proposta e implementada. A demonstração selecionada foi o Smart Jukebox, que exercita os aspectos distribuídos e a dinamicidade do sistema proposto. Este trabalho apresenta a visão do Swarm computacional e apresenta uma plataforma aplicável na prática. A evolução desta arquitetura pode ser a base de uma rede global, heterogênea e orgânica de redes de dispositivos computacionais alavancando a integração de sistemas cíber-físicos na núvem permitindo a cooperação de sistemas escaláveis e flexíveis, interoperando para alcançar objetivos comuns.

Guidance of robot arms using depth data from RGB-D camera

Image Based Visual Servoing (IBVS) is a robotic control scheme based on vision. This scheme uses only the visual information obtained from a camera to guide a robot from any robot pose to a desired one. However, IBVS requires the estimation of different parameters that cannot be obtained directly from the image. These parameters range from the intrinsic camera parameters (which can be obtained from a previous camera calibration), to the measured distance on the optical axis between the camera and visual features, it is the depth. This paper presents a comparative study of the performance of D-IBVS estimating the depth from three different ways using a low cost RGB-D sensor like Kinect. The visual servoing system has been developed over ROS (Robot Operating System), which is a meta-operating system for robots. The experiments prove that the computation of the depth value for each visual feature improves the system performance.

Flexible processing architecture for maintaining QoS in embedded systems applications

Comunicación presentada en las V Jornadas de Computación Empotrada, Valladolid, 17-19 Septiembre 2014

RNA regulation: a new genetics?

Do non-coding RNAs that are derived from the introns and exons of protein-coding and non-protein-coding genes represent a fundamental advance in the genetic operating system of higher organisms? Recent evidence from comparative genomics and molecular genetics indicates that this might be the case. If so, there will be profound consequences for our understanding of the genetics of these organisms, and in particular how the trajectories of differentiation and development and the differences among individuals and species are genomically programmed. But how might this hypothesis be tested?

A pilot study of email in an e-mentoring relationship

E-mentoring is an alternative to conventional face-to-face mentoring, incorporating the use of email, bulletin boards, discussion groups, instant messaging and videoconferencing. In a pilot trial, a New Zealand midwife mentored two new graduate midwives using a secure email system. The main themes of the email messages exchanged were debriefing and reflection, clinical queries, provision of information and discussion of professional issues. The pilot study showed that e-mentoring is a feasible option for midwives and warrants further investigation. Both mentor and mentees found the experience to be a helpful one. One of the advantages for both mentor and mentees was the flexibility of communication, since responses to email messages could be made at times that suited the authors. Nevertheless, issues of Internet access and the technical expertise of midwives will need to be considered in order for large scale e-mentoring to be implemented.

Increased availability and scalability for clustered services via the wait time calculation, trust based filtering and redirection of TCP connection requests

The paper describes two new transport layer (TCP) options and an expanded transport layer queuing strategy that facilitate three functions that are fundamental to the dispatching-based clustered service. A transport layer option has been developed to facilitate. the use of client wait time data within the service request processing of the cluster. A second transport layer option has been developed to facilitate the redirection of service requests by the cluster dispatcher to the cluster processing member. An expanded transport layer service request queuing strategy facilitates the trust based filtering of incoming service requests so that a graceful degradation of service delivery may be achieved during periods of overload - most dramatically evidenced by distributed denial of service attacks against the clustered service. We describe how these new options and queues have been implemented and successfully tested within the transport layer of the Linux kernel.

COMUNICAÇÃO E CULTURA LOCAL NA RÁDIO COMUNITÁRIA BOA NOVA FM EM SENHORA DE OLIVEIRA, MG

Estudo sobre a Rádio Comunitária Boa Nova FM do município de Senhora de Oliveira-MG, no que se refere às suas configurações e as relações com a comunidade local. Os objetivos são identificar o sistema de funcionamento da rádio comunitária como forma de compreender até que ponto ela se insere no cotidiano oliveirense e articula a movimentação local, sobretudo em períodos eleitorais; averiguar o tipo de informação veiculada; observar o sentimento dos ouvintes em relação à mesma. O estudo se baseia em pesquisa bibliográfica para tecer as teorias e nortear todo o processo de pesquisa e no estudo de caso por meio de procedimentos metodológicos como a pesquisa documental, a pesquisa participante e entrevistas semi-estruturadas, além de uma pesquisa de recepção junto aos ouvintes. Conclui-se que a rádio Boa Nova, que convive harmoniosamente com a comunicação comunitária estabelecida também pelo alto falante, articula de forma simplória a informação e a cultura local em suas práticas, pois há reprodução de conteúdo da mídia convencional, além de não haver uma participação ampla da associação comunitária que é sua mantenedora. Apesar da falta de conhecimento técnico da maioria dos locutores e da relação político partidária presente na emissora, há compatibilidade entre o que a rádio veicula e o interesse dos ouvintes.

Source of legitimacy in M-government initiatives in Turkey:concerns human vs. technical resource management

Emerging markets have recently been experiencing a dramatic increased in the number of mobile phone per capita. M-government has, hence, been heralded as an opportunity to leap-frog the technology cycle and provide cheaper and more inclusive and services to all. This chapter explores, within an emerging market context, the legitimacy and resistance facing civil servants’ at the engagement stage with m-government activities and the direct implication for resource management. Thirty in depth interview, in Turkey, are drawn-upon with key ICT civil servant in local organizations. The findings show that three types of resources are perceived as central namely: (i) diffusion of information management, (ii) operating system resource management and (iii) human resource management. The main evidence suggests that legitimacy for each resource management, at local level, is an ongoing struggle where all groups deploy multiples forms of resistance. Overall, greater attention in the resource management strategy for m-government application needs to be devoted to enablers such as civil servants rather than the final consumers or citizens.

A study of adaptive load balancing algorithms for distributed systems

With the advent of distributed computer systems with a largely transparent user interface, new questions have arisen regarding the management of such an environment by an operating system. One fertile area of research is that of load balancing, which attempts to improve system performance by redistributing the workload submitted to the system by the users. Early work in this field concentrated on static placement of computational objects to improve performance, given prior knowledge of process behaviour. More recently this has evolved into studying dynamic load balancing with process migration, thus allowing the system to adapt to varying loads. In this thesis, we describe a simulated system which facilitates experimentation with various load balancing algorithms. The system runs under UNIX and provides functions for user processes to communicate through software ports; processes reside on simulated homogeneous processors, connected by a user-specified topology, and a mechanism is included to allow migration of a process from one processor to another. We present the results of a study of adaptive load balancing algorithms, conducted using the aforementioned simulated system, under varying conditions; these results show the relative merits of different approaches to the load balancing problem, and we analyse the trade-offs between them. Following from this study, we present further novel modifications to suggested algorithms, and show their effects on system performance.

The relative performance of scalable load balancing algorithms in loosely-coupled distributed systems. Available in 2 volumes.

The computer systems of today are characterised by data and program control that are distributed functionally and geographically across a network. A major issue of concern in this environment is the operating system activity of resource management for different processors in the network. To ensure equity in load distribution and improved system performance, load balancing is often undertaken. The research conducted in this field so far, has been primarily concerned with a small set of algorithms operating on tightly-coupled distributed systems. More recent studies have investigated the performance of such algorithms in loosely-coupled architectures but using a small set of processors. This thesis describes a simulation model developed to study the behaviour and general performance characteristics of a range of dynamic load balancing algorithms. Further, the scalability of these algorithms are discussed and a range of regionalised load balancing algorithms developed. In particular, we examine the impact of network diameter and delay on the performance of such algorithms across a range of system workloads. The results produced seem to suggest that the performance of simple dynamic policies are scalable but lack the load stability of more complex global average algorithms.

Software and hardware aspects of a microprocessor controlled lathe

A small lathe has been modified to work under microprocessor control to enhance the facilities which the lathe offers and provide a wider operating range with relevant economic gains. The result of these modifications give better operating system characteristics. A system of electronic circuits have been developed, utilising the latest technology, to replace the pegboard with the associated obsolete electrical components. Software for the system includes control programmes for the implementation of the original pegboard operation and several sample machine code programmes are included, covering a wide spectrum of applications, including diagnostic testing of the control system. It is concluded that it is possible to carry out a low cost retrofit on existing machine tools to enhance their range of capabilities.