Fabrication and mechanical property of carbon nanotube/metal composites

Carbon nanotubes (CNTs) are known to exhibit extraordinary mechanical properties such as high tensile strength, the highest Young modulus etc. These, combining with their large aspect ratio, make CNTs an excellent additive candidate to complement or substitute traditional carbon black or glass fiber fillers for the development of nano-reinforced composites. CNTs have thus far been used as additives in polymers, ceramics and metals to be pursued on practical applications of their composites. © 2010 IEEE.

Methods of harvesting and preservation of the diatom Chaetoceros calcitrans

Diatom culture and larval feeding experiments were conducted to test the viability and acceptability of preserved algal concentrates. C. calcitrans is characterised by the presence of setae which keep them suspended in cultures and make autoflocculation very difficult. Flocculation was induced by the addition of a floc-forming chemical. Using the optimum conditions, it was possible to harvest the algae within 1-h settling time and with about 84% recovery. The viability of frozen Chaetoceros was determined by actual cell reproduction. Preliminary feeding experiments showed that Chaetoceros can be successfully used as a substitute for fresh diatoms as feed for Penaeus monodon larvae. Simple freezing techniques, with or without the use of protectants has been found convenient for preserving algal concentrates in small volumes for both feeding and culture purposes.

Experiment on larval rearing of Penaeus monodon fed with cultured diatom Chaetoceros calcitran and fermented vegetable trash

A brief account is given of experiments undertaken rearing Penaeus monodon larvae fed on diatom (Chaetoceros calcitran) and fermented vegetable trash, which included fruits and their peels, vegetables and rice. The possible use of high protein content trash materials as a feed substitute is examined briefly.

Induced breeding of Indian carps using Des Gly^10 [D-Ala^6] LHRH ethylamide

Details are given of a study conducted in order to determine the efficacy of Des Gly^10 [D-Ala^6] LHRH ethylamide in the induction of spawning in Cirrhinus mrigala and Labeo fimbriatus . Findings shows this LHRH analogue to be a promising substitute for the pituitary gland extract which is currently used. Further studies are required to standardize the dose and method of administration in the various cultivable species in India.

Perspectives of impacts of international fish trade in Kenya

There has been tremendous growth in international trade on fish and fisheries products in the last four decades. In 1970 the value of internationally traded fish was estimated at 3 billion; this increased to US$ 15 billion in 1980, US$ 36 billion in 1990 and US$ 55 billion in 2000 (Ahmed, 2003). Recent statistics show that fish trade has surpassed other agricultural commodities that have traditionally been traded internationally such as coffee, tea, cocoa, sugar, cereals, meat, oils and milk. In 2000, fish contributed 22% of the value of all agricultural exports, making it the highest internationally traded food product (Ahmed, 2003). In another perspective, nearly 40% of the world's fish is now sold in the international market. The flow of fish in the international market is highly lopsided. About 50% of fish exportscomefromthedevelopingworld ,ofwhich 20%arefrom low-incomefood deficient countries. Most of this fish, however, is consumed by the developed countries, which account for nearly 80% of all imported fish. The EU, USA and Japan are the major importers, accounting for over 77% of global fish imports. Thus, while developing countries playa big role in fish production , they consume very little of it, instead preferring to sell for the hard currency. In some fish exporting countries, especially those in Asia, there is some link between fish exports and imports of substitute and complementary foods. Much of the increased earning from fish exports in those countries is explained by a corresponding rise in expenditure on imported foods. This is not the case in many of the fish exporter nations in Africa. In their case, fish exports generate foreign exchange that they use to meet other socio-political objectives; hardly is it aimed at solving the wider food needs. Therefore, one of the most immediate concerns of international fish trade is its impact on food security in the poor exporter nations.

Preliminary observations on cage culture of Tilapia esculenta Graham and Tilapia xillii (Gervais) in Lake Victoria waters, at the Freshwater Fisheries Institute, Nyegezi, Tanzania

Cage culture of Tilapia is not suggested as a substitute for any known techniques in fish culture, but as one of the various techniques of obtaining more fish under controlled conditions. This fact has been very well accepted in various countries. Whererever facilities exist, this line of fish culture should be vigorously explored as a possible avenue in increasing fish production. High density stocking, management under controlled conditions, easy technique of fabricating the cage at relatively low cost, having no demand on land area, absence of prolific and effective breeding and easy availability of fish when a person needs it are a few of the attractions of the technique. The studies indicate that it is desirable to have different meshes for the cages, such as, small meshed cages for rearing fry to fingerlings stages, and larger meshed cages for rearing fingerlings to table sized fishes. II' the meshes are small, the resistance will be more and less water wilt pass through. While feeding with powdered food material, because of brisk activity of feeding fish, a part of the feed appeared wasted. This can be easily overcome if we would resort to feeding fish with cheap pelleted feeds which will no doubt reduce wastage. Precaution has to be taken against damage of the net and thereby loss of fish and against poaching by unauthorised persons. In the present attempt has been demonstrated the possibility of utilizing locally available species of Tilapia for cage culture and obtaining moderately satisfactory growth rates.

Solution oriented partnerships - A new business model for integrating global-production efficiencies with sustainability

A business model for integrating global-production efficiencies with sustainability is discussed. Two trends that emulate some of the aspects of the wealthy are the increasing willingness of many to pay extra for customization such as clothes, of kitchens and the increasing acceptance of purchasing a service as a product substitute. Two final trends that are also based in the attitudes of people is an increased awareness of the value of local culture and an increased concern with issues of sustainability. The results show that the goal congruence between for-profit and not-for-profit organizations puts emphasis on value and belief of the organization.

Parallel implementation of Multilevel BDDC

In application of the Balancing Domain Decomposition by Constraints (BDDC) to a case with many substructures, solving the coarse problem exactly becomes the bottleneck which spoils scalability of the solver. However, it is straightforward for BDDC to substitute the exact solution of the coarse problem by another step of BDDC method with subdomains playing the role of elements. In this way, the algorithm of three-level BDDC method is obtained. If this approach is applied recursively, multilevel BDDC method is derived. We present a detailed description of a recently developed parallel implementation of this algorithm. The implementation is applied to an engineering problem of linear elasticity and a benchmark problem of Stokes flow in a cavity. Results by the multilevel approach are compared to those by the standard (two-level) BDDC method.

Robust airfoil design with respect to boundary layer transition

In order to disign an airfoil of which maximum lift coefficient (CL max) is not sensitive to location of forced top boundary layer transition. Taking maximizing mean value of CL max and minimizing standard deviation as biobjective, leading edge radius, manximum thickness and its location, maximum camber and its location as deterministic design variables, location of forced top boundary layer transition as stochastic variable, XFOIL as deterministic CFD solver, non-intrusive polynomial chaos as substitute of Monte Carlo method, we completed a robust airfoil design problem. Results demonstrate performance of initial airfoil is enhanced through reducing standard deviation of CL max. Besides, we also know maximum thickness has the most dominating effect on mean value of CL max, location of maximum thickness has the most dominating effect on standard deviation of CL max, maximum camber has a little effect on both mean value and standard deviation, and maximum camber is the only element of which increase can lead increase of mean value and standard deviation at the same time. Copyright © 2009 by the American Institute of Aeronautics and Astronautics, Inc.

The interaction of riblets with wall-bounded turbulence

The purpose of this thesis is to give answer to the question: why do riblets stop working for a certain size? Riblets are small surface grooves aligned in the mean direction of an overlying turbulent flow, designed specifically to reduce the friction between the flow and the surface. They were inspired by biological surfaces, like the oriented denticles in the skin of fastswimming sharks, and were the focus of a significant amount of research in the late eighties and nineties. Although it was found that the drag reduction depends on the riblet size scaled in wall units, the physical mechanisms implicated have not been completely understood up to now. It has been explained how riblets of vanishing size interact with the turbulent flow, producing a change in the drag proportional to their size, but that is not the regime of practical interest. The optimum performance is achieved for larger sizes, once that linear behavior has broken down, but before riblets begin adopting the character of regular roughness and increasing drag. This regime, which is the most relevant from a technological perspective, was precisely the less understood, so we have focused on it. Our efforts have followed three basic directions. First, we have re-assessed the available experimental data, seeking to identify common characteristics in the optimum regime across the different existing riblet geometries. This study has led to the proposal of a new length scale, the square root of the groove crosssection, to substitute the traditional peak-to-peak spacing. Scaling the riblet dimension with this length, the size of breakdown of the linear behavior becomes roughly universal. This suggests that the onset of the breakdown is related to a certain, fixed value of the cross-section of the groove. Second, we have conducted a set of direct numerical simulations of the turbulent flow over riblets, for sizes spanning the full drag reduction range. We have thus been able to reproduce the gradual transition between the different regimes. The spectral analysis of the flows has proven particularly fruitful, since it has made possible to identify spanwise rollers immediately above the riblets, which begin to appear when the riblet size is close to the optimum. This is a quite surprising feature of the flow, not because of the uniqueness of the phenomenon, which had been reported before for other types of complex and porous surfaces, but because most previous studies had focused on the detail of the flow above each riblet as a unit. Our novel approach has provided the adequate tools to capture coherent structures with an extended spanwise support, which interact with the riblets not individually, but collectively. We have also proven that those spanwise structures are responsible for the increase in drag past the viscous breakdown. Finally, we have analyzed the stability of the flow with a simplified model that connects the appearance of rollers to a Kelvin–Helmholtz-like instability, as is the case also for the flow over plant canopies and porous surfaces. In spite of the model emulating the presence of riblets only in an averaged, general fashion, it succeeds to capture the essential attributes of the breakdown, and provides a theoretical justification for the scaling with the groove cross-section.

Handbook of nanoindentation with biological applications

Nanoindentation is ideal for the characterization of inhomogeneous biological materials. However, the use of nanoindentation techniques in biological systems is associated with some distinctively different techniques and challenges. For example, engineering materials used in the microelectronics industry (e.g. ceramics and metals) for which the technique was developed, are relatively stiff and exhibit time-independent mechanical responses. Biological materials, on the other hand, exhibit time-dependent behavior, and can span a range of stiffness regimes from moduli of Pa to GPa - eight to nine orders of magnitude. As such, there are differences in the selection of instrumentation, tip geometry, and data analysis in comparison with the "black box" nanoindentation techniques as sold by commercial manufacturers. The use of scanning probe equipment (atomic force miscroscopy) is also common for small-scale indentation of soft materials in biology. The book is broadly divided into two parts. The first part presents the "basic science" of nanoindentation including the background of contact mechanics underlying indentation technique, and the instrumentation used to gather mechanical data. Both the mechanics background and the instrumentation overview provide perspectives that are optimized for biological applications, including discussions on hydrated materials and adaptations for low-stiffness materials. The second part of the book covers the applications of nanoindentation technique in biological materials. Included in the coverage are mineralized and nonmineralized tissues, wood and plant tissues, tissue-engineering substitute materials, cells and membranes, and cutting-edge applications at molecular level including the use of functionalized tips to probe specific molecular interactions (e.g. the ligand-receptor binding). The book concludes with a concise summary and an insightful forecast of the future highlighting the current challenges. © 2011 by Pan Stanford Publishing Pte. Ltd. All rights reserved.

Consumption of fa cai Nostoc soup: A Potential for BMAA exposure from Nostoc cyanobacteria in China?

Grown in arid regions of western China the cyanobacterium Nostoc flagelliforme - called fa cai in Mandarin and fat choy in Cantonese - is wild-harvested and used to make soup consumed during New Year's celebrations. High prices, up to $125 USD/kg, led to overharvesting in Inner Mongolia, Ningxia, Gansu, Qinghai, and Xinjiang. Degradation of arid ecosystems, desertification, and conflicts between Nostoc harvesters and Mongol herdsman concerned the Chinese environmental authorities, leading to a government ban of Nostoc commerce. This ban stimulated increased marketing of a substitute made from starch. We analysed samples purchased throughout China as well as in Chinese markets in the United States and the United Kingdom. Some were counterfeits consisting of dyed starch noodles. A few samples from California contained Nostoc flagelliforme but were adulterated with starch noodles. Other samples, including those from the United Kingdom, consisted of pure Nostoc flagelliforme. A recent survey of markets in Cheng Du showed no real Nostoc flagelliforme to be marketed. Real and artificial fa cai differ in the presence of beta-N-methylamino-L-alanine (BMAA). Given its status as a high-priced luxury food, the government ban on collection and marketing, and the replacement of real fa cai with starch substitutes consumed only on special occasions, it is anticipated that dietary exposure to BMAA from fa cai will be reduced in the future in China.

A literature and practice review to develop sustainable business model archetypes

Eco-innovations, eco-efficiency and corporate social responsibility practices define much of the current industrial sustainability agenda. While important, they are insufficient in themselves to deliver the holistic changes necessary to achieve long-term social and environmental sustainability. How can we encourage corporate innovation that significantly changes the way companies operate to ensure greater sustainability? Sustainable business models (SBM) incorporate a triple bottom line approach and consider a wide range of stakeholder interests, including environment and society. They are important in driving and implementing corporate innovation for sustainability, can help embed sustainability into business purpose and processes, and serve as a key driver of competitive advantage. Many innovative approaches may contribute to delivering sustainability through business models, but have not been collated under a unifying theme of business model innovation. The literature and business practice review has identified a wide range of examples of mechanisms and solutions that can contribute to business model innovation for sustainability. The examples were collated and analysed to identify defining patterns and attributes that might facilitate categorisation. Sustainable business model archetypes are introduced to describe groupings of mechanisms and solutions that may contribute to building up the business model for sustainability. The aim of these archetypes is to develop a common language that can be used to accelerate the development of sustainable business models in research and practice. The archetypes are: Maximise material and energy efficiency; Create value from 'waste'; Substitute with renewables and natural processes; Deliver functionality rather than ownership; Adopt a stewardship role; Encourage sufficiency; Re-purpose the business for society/environment; and Develop scale-up solutions. © 2014 The Authors. Published by Elsevier Ltd. All rights reserved.

An ELISA-like time-resolved fluorescence immunoassay for microcystin detection

Background: A time-resolved fluorescence immunoassay (TRFIA), based on anti-microcystin-LR (MCLR) monoclonal antibodies (MAbs) and europium-labeled antimouse IgG conjugate, was first developed for microcystin detection. Methods: Anti-MCLR MAbs were prepared by a standard method, and the attained MAbs showed a good cross reactivity with MCLR, MCRR and MCYR. The TRFIA was performed in an indirect competitive mode. The detection method of TRFIA was compared with indirect competitive enzyme-linked immunosorbent assay (ELISA) and high-performance liquid chromatography (HPLC). Results: The TRFIA exhibited a typical sigmoidal response for MCLR at concentrations of 0.005-50 ng/ml, with a wide quantitative range between 0.01 and 10 ng/ml, indicating the broadest detective range and the most sensitive of all the methods for microcystins (MCs) detection. Additionally, the TRFIA maintained good reliability through its quantitative range, as evidenced by low coefficients of variation (1.6-12.2%). The toxin data of algal samples assayed from TRFIA were in the same range as those with ELISA and HPLC, implying that the method was reliable and practical for the detection of MCs. Conclusions: The TRFIA may offer a valuable alternative or a substitute for conventional ELISA for microcystin detection. (C) 2004 Elsevier B.V. All rights reserved.

Interface as the origin of ferromagnetism in cobalt doped ZnO film grown on silicon substrate

We have investigated the magnetic properties of Co-doped zinc oxide (ZnO) film deposited on silicon substrate by magnetron sputtering. Co ions have a valence of 2+ and substitute for Zn sites in the lattice. By using a chemical etching method, an extrinsic ferromagnetism was demonstrated. The observed ferromagnetism is neither associated with magnetic precipitates nor with contamination, but originates from the silicon/silicon oxide interface. This interface ferromagnetism is characterized by being temperature independent and by having a parallel magnetic anisotropy. (C) 2008 American Institute of Physics. [DOI: 10.1063/1.2989128]