Execução de túneis nas formações vulcânicas da Ilha da Madeira: o caso do túnel 1 da nova ligação Vasco Gil-Fundoa à cota 500

Este trabalho pretende contribuir para um melhor conhecimento ao nível da execução de túneis em formações vulcânicas, mais especificamente na Ilha da Madeira, visto esta região ter sido nos últimos anos palco da construção de inúmeros túneis rodoviários, que forneceram novos dados, experiencias e metodologias na execução de túneis em maciços vulcânicos. Assim sendo, esta tese foca inicialmente a geologia da Ilha da Madeira com o objectivo de dar a conhecer as características litológicas das rochas que compõem os maciços vulcânicos assim como é feita uma abordagem à história e evolução dos túneis existentes na região, com realce para os vários tipos de túneis executados e para os acidentes mais comuns que acontecem durante a escavação neste tipo de maciços. Depois são abordados os estudos geológicos e geotécnicos que são indispensáveis antes do inicio da execução dos túneis e também os métodos de escavação utilizados em maciços vulcânicos. É ainda abordado o estudo das vibrações causadas pelo uso de explosivos na escavação de túneis visto ser o método mais usado na região. Por fim é relatado o acompanhamento realizado durante a execução de um túnel na Ilha da Madeira, com particular destaque ao estudo das vibrações causadas devido à detonação de explosivos.

Estabilidade de vertentes nas formações vulcânicas da Ilha da Madeira

Esta dissertação pretende aprofundar o conhecimento da actual situação das vertentes da Ilha da Madeira, uma vez que tem sido um problema que muito tem afectado a ilha dado os inúmeros acidentes que ocorrem todos os anos principalmente na altura do inverno. A permanente instabilidade que muitas vertentes e escarpas da ilha da Madeira estão sujeitas, resultam da sua evolução geológica, com consequências por vezes trágicas, levam à necessidade de aprofundamento dos fenómenos envolvidos no processo evolutivo e à busca de soluções técnicas economicamente viáveis dentro do quadro de conhecimento do dimensionamento de taludes. A Ilha da Madeira possui uma estratigrafia composta por três complexos vulcânicos, constituído cada um deles por várias unidades estratigráficas, o que a torna uma ilha heterogénea e anisotrópica no que à geologia diz respeito, sendo diversos os materiais que podemos encontrar na mesma vertente, mesmo possuindo dimensões não muito elevadas. Torna-se por isso essencial encontrar o método de estabilização que mais se adequa a cada um desses materiais. Para além da variedade ao nível geológico, existem também uma série de movimentos de vertentes associados que ocorrem na Madeira, sendo a queda de rochas, aquele que mais se observa e que mais danos tem provocado ao longo dos últimos anos. É aqui que surge a importância da contenção executada através do recurso a pregagens e ancoragens, sendo as primeiras as mais utilizadas no processo de contenção das escarpas. Uma vez identificado o principal movimento de vertente, a estabilidade global dos taludes raramente é posta em causa, ainda assim é feita a análise aos diversos métodos de análise estabilização onde se destacam os métodos das fatias principalmente o de Fellenius e o de Bishop. Numa parte teórico-prática é feita a análise mais elaborada do talude do Caniçal e às escarpas do Lugar de Baixo e do Porto da Cruz, que apresentam processos construtivos diferentes: os dois últimos distinguem-se do primeiro pela execução de banquetas, ainda que as medidas adoptadas para a contenção dos materiais sejam semelhantes para todos.

Contributo para a caracterização geológica e geotécnica dos diferentes complexos vulcânicos da Ilha da Madeira

Este trabalho permite oferecer uma contribuição para a caracterização geológica-geotécnica dos três complexos vulcânicos da ilha da Madeira, através de sete amostras de material geológico, pertencentes a quatro das sete unidades vulcano-estratigráficas presentes na ilha. São estudados materiais da Unidade do Porto da Cruz (CVI 1), da Unidade da Encumeada (CVM 1), da Unidade dos Lombos (CVS 1) e da Unidade do Funchal (CVS 2), correspondendo a rochas vulcânicas muito alteradas, solos sedimentares, tufos, basaltos e mugearitos, respectivamente. No âmbito da caracterização geológica, é efectuada uma classificação litológica do material amostrado. Também é realizado um estudo das descontinuidades dos maciços onde se efectuaram as amostragens, em função dos parâmetros atitude, espaçamento, abertura, rugosidade, preenchimento, extensão e n.º de famílias de descontinuidades. No âmbito da caracterização geotécnica, é realizada uma campanha de ensaios laboratoriais aos materiais rochosos e terrosos, de forma a determinar uma série de parâmetros geotécnicos. Os ensaios realizados para as amostras de solo são: análise granulométrica; determinação do teor em água; determinação do teor em cinzas e matéria orgânica; determinação da densidade das partículas; determinação do equivalente de areia; e determinação dos limites de consistência (limites de Atterberg). Para as amostras de rochas, são efectuados ensaios para a determinação dos seguintes parâmetros: absorção de água à pressão atmosférica; massa volúmica aparente seca; resistência à compressão uniaxial; módulo de deformabilidade; e resistência à compressão deduzida através da dureza de ressalto de Schmidt. Após a caracterização geológica-geotécnica dos materiais amostrados, é efectuada uma análise de resultados, bem como uma comparação com resultados de outras referências bibliográficas. Este trabalho é um contributo para um banco de dados geológicos e geotécnicos sobre os complexos vulcânicos da ilha da Madeira, deixando em aberto a continuidade de estudos nesta temática.

Avaliação da dolomita funcionalizada para remoção de H2S em gás natural

The natural gas is an alternative source of energy which is found underground in porous and permeable rocks and being associated or not to the oil. Its basic composition includes methane, other hydrocarbon and compounds such as carbon dioxide, nitrogen, sulphidric gas, mercaptans, water and solid particles. In this work, the dolomite mineral, a double carbonate of calcium and magnesium whose the chemical formula is CaMg(CO3)2, was evaluated as adsorbent material. The material was characterized by granulometric analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, differential thermal analysis, specific surface area, porosity, scanning electronic microscopy and infrared spectroscopy. Then the material was functionalized with diethanolamine (dolomite+diethanolamine) and diisopropylamine (dolomite+diisopropylamine). The results indicated that the adsorbents presented appropriate physiochemical characteristics for H2S adsorption. The adsorption tests were accomplished in a system coupled to a gas chromatograph and the H2S monitoring in the output of the system was accomplished by a pulsed flame photometric detector (PFPD). The adsorbents presented a significant adsorption capacity. Among the analyzed adsorbents, the dolomite+diethanolamine presented the best capacity of adsorption. The breakthrough curves obtained proved the efficiency of this process

Análise gráfica de estruturas porosas sobre a ótica da estereologia

In this work we developed a computer simulation program for physics porous structures based on programming language C + + using a Geforce 9600 GT with the PhysX chip, originally developed for video games. With this tool, the ability of physical interaction between simulated objects is enlarged, allowing to simulate a porous structure, for example, reservoir rocks and structures with high density. The initial procedure for developing the simulation is the construction of porous cubic structure consisting of spheres with a single size and with varying sizes. In addition, structures can also be simulated with various volume fractions. The results presented are divided into two parts: first, the ball shall be deemed as solid grains, ie the matrix phase represents the porosity, the second, the spheres are considered as pores. In this case the matrix phase represents the solid phase. The simulations in both cases are the same, but the simulated structures are intrinsically different. To validate the results presented by the program, simulations were performed by varying the amount of grain, the grain size distribution and void fraction in the structure. All results showed statistically reliable and consistent with those presented in the literature. The mean values and distributions of stereological parameters measured, such as intercept linear section of perimeter area, sectional area and mean free path are in agreement with the results obtained in the literature for the structures simulated. The results may help the understanding of real structures.

Estudo da molhabilidade de ligas de adição à base de prata sobre insertos cerâmicos para aplicação em brocas perfuração de poços de petróleo

Metal-ceramic interfaces are present in tricone drill bits with hard ceramic inserts for oil well drilling operations. The combination of actions of cutting, crushing and breaking up of rocks results in the degradation of tricone drill bits by wear, total or partial rupture of the drill bit body or the ceramic inserts, thermal shock and corrosion. Also the improper pressfitting of the ceramic inserts on the bit body may cause its total detachment, and promote serious damages to the drill bit. The improvement on the production process of metal-ceramic interfaces can eliminate or minimize some of above-mentioned failures presented in tricone drill bits, optimizing their lifetime and so reducing drilling metric cost. Brazing is a widely established technique to join metal-ceramic materials, and may be an excellent alternative to the common mechanical press fitting process of hard ceramic inserts on the steel bit body for tricone drill bit. Wetting phenomena plays an essential role in the production of metal/ceramic interfaces when a liquid phase is present in the process. In this work, 72Silver-28Copper eutectic based brazing alloys were melted onto zirconia, silicon nitride and tungsten carbide/Co substrates under high vacuum. Contact angle evolution was measured and graphically plotted, and the interfaces produced were analysed by SEM-EDX. The AgCu eutectic alloy did not wet any ceramic substrates, showing high contact angles, and so without chemical interaction between the materials. Better results were found for the systemns containing 3%wt of titanium in the AgCu alloy. The presence os titanium as a solute in the alloy produces wettable cand termodinamically stable compounds, increasing the ceramics wetting beahviour

Estudo da substituição de agregados miúdos naturais por pó de pedra em concreto de cimento portland

The sharp consumption of natural resources by the construction industry has motivated numerous studies concerning the application of waste to replace partially or fully, some materials, such as aggregates, thereby reducing the environmental impact caused by the extraction of sand and crushing process. The application of stone dust from crushing process arising as an aggregate for the production of Portland cement concrete is a viable alternative in view of the high cost of natural sands, in addition to the environmental damage which causes its operation to the environment. The stone dust has reduced cost compared to natural sand because it is produced in the beds of their own quarries, which are usually located close to major urban centers. This study examined the feasibility of using stone dust from the crushing of rock gneisses in the state of Bahia, replacing natural quartz sand. In the development of scientific study was conducted to characterize physical and chemical raw materials applied and molded cylindrical specimens , using as reference values Fck 20, Fck 25 and Fck 30 MPa ( resistance characteristic of the concrete after 28 days) in following compositions stone powder: 10%, 30%, 50 %, 100% and 100% with additive. The specimens were cured and subjected to the tests of compressive strength and water absorption, then the samples were subjected to the tests of X-ray diffraction and scanning electron microscopy. The results obtained showed that the composition with 10% stone powder showed the best results regarding the physical and mechanical tests performed, confirming the reduction in compressive strength and increased water uptake increased as the content of the powder stone in the concrete composition

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

Evolução diagenética e caracterização dos reservatórios da seção devoniana na Bacia do Rio do Peixe-Nordeste do Brasil

The Rio do Peixe Basin represents a main basin of northeastern Brazil and pioneering work positioned the rocks of this basin in the Early Cretaceous. However, a recent study, based on integrated pollen analysis from three wells, found an unprecedented siliciclastic sedimentary section, in the region, of early Devonian age. Therefore, the present study aims a detailed petrographic and petrological analysis of this devonian section, in the Rio do Peixe Basin and proposes a diagenetic evolution, to understand the characteristics of the porous system, identify the main reservoir petrofacies with the main factors impacting on the quality of these rocks as reservoirs and a quick study on the provenance of this section. The petrographic study was based on samples obtained from subsurface and surface. The diagenetic evolution of petrofacies and its identification were based only on subsurface samples and the study of provenance was based on surface samples. The thin sections were prepared from sandstones, pelites and sandstones intercalated with pelites. The original detrital composition for this section is arcosean and the main diagenetic processes that affected these rocks occur in various depths and different conditions, which resulted in extensive diagenetic variety. The following processes were identified: early fracture and healing of grains; albitization of K-feldspar and plagioclase; siderite; precipitation of silica and feldspar; mechanical infiltration of clay and its transformation to illite/esmectite and illite; autigenesis of analcime; dissolution; autigenesis of chlorite; dolomite/ferrous dolomite/anquerite; apatite; calcite; pyrite; titanium minerals and iron oxide-hidroxide. The occurrence of a recently discovered volcanism, in the Rio do Peixe Basin, may have influenced the diagenetic evolution of this section. Three diagenetic stages affected the Devonian section: eo, meso and telodiagenesis. This section is compositionally quite feldspathic, indicating provenance from continental blocks, between transitional continental and uplift of the basement. From this study, we observed a wide heterogeneity in the role of the studied sandstones as reservoirs. Seven petrofacies were identified, taking into account the main diagenetic constituent responsible for the reduction of porosity. It is possible that the loss of original porosity was influenced by intense diagenesis in these rocks, where the main constituent for the loss of porosity are clays minerals, oxides and carbonate cement (calcite and dolomite)

Sistema inteligente para estimar a porosidade em sedimentos a partir da análise de sinais GPR

This Thesis presents the elaboration of a methodological propose for the development of an intelligent system, able to automatically achieve the effective porosity, in sedimentary layers, from a data bank built with information from the Ground Penetrating Radar GPR. The intelligent system was built to model the relation between the porosity (response variable) and the electromagnetic attribute from the GPR (explicative variables). Using it, the porosity was estimated using the artificial neural network (Multilayer Perceptron MLP) and the multiple linear regression. The data from the response variable and from the explicative variables were achieved in laboratory and in GPR surveys outlined in controlled sites, on site and in laboratory. The proposed intelligent system has the capacity of estimating the porosity from any available data bank, which has the same variables used in this Thesis. The architecture of the neural network used can be modified according to the existing necessity, adapting to the available data bank. The use of the multiple linear regression model allowed the identification and quantification of the influence (level of effect) from each explicative variable in the estimation of the porosity. The proposed methodology can revolutionize the use of the GPR, not only for the imaging of the sedimentary geometry and faces, but mainly for the automatically achievement of the porosity one of the most important parameters for the characterization of reservoir rocks (from petroleum or water)

Caracterização do nicho alimentar do polvo octopus insularis (cephalopoda: octopodidae): da população ao indivíduo

Octopus insularis, target species in this study, is the dominant benthic octopus of the North and Northeast Brazil. Studies on behavior and ecology of the species have been conducted primarily on oceanic islands, with little information on the continental populations. In this study, two regions of the coast of RN, Rio do Fogo and Pirangi, were chosen for the characterization of the niche by O. insularis populations. The dietary niche, habitat and distribution of O. insularis of oceanic islands and the mainland, were compared. In addition, individual characteristics of feeding behavior in a population at Atol das Rocas was studied, taking into account the size of individuals, the proximity of the dens and characteristics of their "personality". The diet of the Rio do Fogo population was composed mainly of bivalve molluscs (82%), unlike Pirangi population that has a diet consisting mainly of crustaceans Decapoda (68%), similar to that described for the populations of the islands. Consequently, the feeding niches of the island populations were more similar, with greater overlap, but the niche breadth of the continent was larger. The habitats of occurrence on the coast includes reefs, rocks, gravel and an environment called Restinga, a plateau composed of biogenic gravel, sand, sponges and algae, showed a high density of animals. Similarly to that found in the islands, O. insularis in the continent, had a clumped distribution, and a bathymetric segregation between small and large individuals. The differences in diet composition among populations were explained by differences in habitat and coverage of the substrate, which may be directly influencing the diversity and prey availability in these environments. The individual analyzes of the population at Atol das Rocas, showed no relationship between the degree of individual specialization and the different personalities, or the distance between dens. The results suggest that the foraging strategy with greater availability of prey in the environment has an influence on diet octopuses over preferences or personalities

Morfometria de microbacias do Córrego Rico, afluente do Rio Mogi-Guaçu, Estado de São Paulo, Brasil

Este trabalho teve como objetivo avaliar as características morfométricas das microbacias (2ª, 3ª, 4ª e 5ª ordens de magnitude) da bacia hidrográfica do córrego Rico, sub-bacia do Rio Mogi-Guaçu, localizada na região administrativa de Ribeirão Preto, Estado de São Paulo, Brasil. Para tanto, foram determinados os parâmetros físicos e a configuração topográfica natural do sistema de drenagem. Os procedimentos para a obtenção dos dados foram fundamentados em técnicas de sensoriamento remoto e geoprocessamento. A partir da vetorização das cartas topográficas correspondentes à área de estudo, realizou-se a análise morfométrica quanto às características dimensionais, do padrão de drenagem e do relevo no sistema de informação geográfica ArcView. A microbacia é considerada de sexta ordem de magnitude, com área estimada de 542 km², com 85 microbacias de segunda ordem, 22 de terceira, sete de quarta ordem e duas de quinta. Utilizando o critério geométrico, na disposição fluvial das sub-bacias de cabeceiras observou-se a predominância dos modelos dendríticos e subdendríticos, enquanto a jusante predominava o modelo subparalelo, respectivamente, nas áreas de ocorrências dos arenitos Bauru e rochas efusivas básicas.

Mestres e aprendiz: perambulando por ilhas de resistência

Monoculture of mind This idea, presented by Vandana Shiva, reflects the phase that we have experienced in the world: a notion of civilization that, since many decades, characterized by a technocratic big trend, has been shown as dominant and hegemonic. Based on a thinking and acting, felling and whishing standardization, this wave ends implying in what can be called of humanity‟s crisis at civilizational process. Destruction of simpler and more harmonious lifestyles with nature, human relations increasingly distant, values embrittlement, as respect, goodness and love, are some consequences of that behavioral homogenization. In the other hand, appears an archipelago of cultural and cognitive resistance against this devastating wave. Edgar Morin and Ceiça Almeida refer to this archipelago as a South Thought , what is not just a geographic question. Report, therefore, to some places, peoples, island that keep ancient costumes and knowledge, orally transmitted, for instance, from elders to younger, or vice versa, in an almost constant flow. Particular ways of experiencing the world around themselves, the men, animals, plants, rocks, or even not alive beings, masters or enchanted, spiritual guides. Next to a logic of sensitive, as Claude Levi-Strauss proposes, this reading, which is a more attentive, observer and wiser posture of surroundings, is based on touching, smelling, eating, seeing, and, I would add, felling. In light of this, I try to expatiate about certain experiences that I had the pleasure of living in some of these islands of resistance. Talks, perceptions, observations, sensations Stories, prose, poetries, music, photos, graphics Whatever could serve to portray even a bit of the reflections and forms to understand (ourselves) and produce knowledge, such as from a formation/Education to life, was well used at this ethnographic work. Space to the subjectivity and emotions I had, have, and will have a lot Everything for the dear reader may fell traveling around the world of tradition, resistance

Hillslope curvature, clay mineralogy, and phosphorus adsorption in an Alfisol cultivated with sugarcane

As curvaturas do relevo promovem pedoambientes específicos que condicionam os atributos químicos e mineralógicos do solo e podem auxiliar na definição de zonas específicas de manejo. O fósforo (P) é um dos principais elementos limitantes ao desenvolvimento e longevidade do canavial. O teor e a constituição mineralógica da fração argila assumem papel importante na disponibilidade do P, sendo que a gibbsita (Gb), quando presente em altas proporções no solo, pode ser a principal responsável pela sua adsorção e indisponibilidade. Investigaram-se as relações e a variabilidade espacial da adsorção de P e a ocorrência de caulinita (Ct) e gibbsita na fração argila de um Argissolo Vermelho-Amarelo eutrófico originado de rochas areníticas sob diferentes curvaturas do relevo em área sob cultivo de cana-de-açúcar. Duas malhas de 1 ha foram delimitadas numa área côncava e outra área convexa. Foram coletadas 121 amostras em cada área para realização das análises granulométricas, químicas e mineralógicas. A capacidade máxima de adsorção de P foi obtida em seis amostras escolhidas ao acaso em cada área. Os resultados foram submetidos às análises estatísticas descritiva e geoestatística. Os menores valores médios de P disponível encontraram-se na área convexa. Nesta área, a proporção de gibbsita, expressa pelos valores da razão [Gb/(Gb+Ct)] e os valores de capacidade máxima de adsorção de fósforo foram maiores do que na área côncava.

Uso de renderização volumétrica e realidade virtual para problemas de percolação na engenharia

In the recovering process of oil, rock heterogeneity has a huge impact on how fluids move in the field, defining how much oil can be recovered. In order to study this variability, percolation theory, which describes phenomena involving geometry and connectivity are the bases, is a very useful model. Result of percolation is tridimensional data and have no physical meaning until visualized in form of images or animations. Although a lot of powerful and sophisticated visualization tools have been developed, they focus on generation of planar 2D images. In order to interpret data as they would be in the real world, virtual reality techniques using stereo images could be used. In this work we propose an interactive and helpful tool, named ZSweepVR, based on virtual reality techniques that allows a better comprehension of volumetric data generated by simulation of dynamic percolation. The developed system has the ability to render images using two different techniques: surface rendering and volume rendering. Surface rendering is accomplished by OpenGL directives and volume rendering is accomplished by the Zsweep direct volume rendering engine. In the case of volumetric rendering, we implemented an algorithm to generate stereo images. We also propose enhancements in the original percolation algorithm in order to get a better performance. We applied our developed tools to a mature field database, obtaining satisfactory results. The use of stereoscopic and volumetric images brought valuable contributions for the interpretation and clustering formation analysis in percolation, what certainly could lead to better decisions about the exploration and recovery process in oil fields