Laser stimulated light reflection for TeO2-WO 3-Bi2O3 thin films with incorporated Si nanoparticles

A novel method of preparation of the Si nanoparticles (NPs) incorporated in tellurite TeO2-WO3-Bi2O3 (TWB) thin films is proposed. This mew method applies RF magnetron sputtering technique at room temperature. The incorporation of Si NP was confirmed by transmission electron microscopy (TEM); isolated Si NPs with diameters of around 6 nm are observed. Energy dispersive X-ray spectroscopy (EDS) was performed during TEM analysis in order to confirm the presence of Si NP and also the other elements of the thin film. The thin films are explored with respect to the photoinduced changes of the reflectivity within the 400-65 nm spectra range using a 10 ns pulsed Nd:YAG with power densities varying up to 400 MW/cm2 and beam diameter within the 3-5 mm range. The observed processes are analyzed within a framework of trapping level conceptions for the Si NP. The possible application of the discovered materials as optical sensitive sensors is proposed. © 2013 Elsevier B.V.

Correlation between hand/wrist and panoramic radiographs in severe secondary hyperparathyroidism

Objectives: Hand/wrist and dental radiographs are important for osteoporosis analysis in secondary hyperparathyroidism (SHPT). This study evaluated whether a correlation exists between the effects of the disease on the hands and jaws, and investigated the association between osteoporosis progression in the hands and parathyroid hormone (PTH) levels in chronic kidney disease (CKD) patients. Materials and methods: Four panoramic radiographic parameters (mental index, mandibular cortical index, trabecular bone pattern, and calcification/resorption) and four corresponding hand/wrist radiographic parameters (metacarpal cortical thickness, phalangeal cortical index, trabecular bone pattern, and calcification/resorption) were applied to investigate possible correlation between the effects of SHPT on the jaws and hands/wrists, by Spearman's correlation coefficient. PTH levels and the hand/wrist radiographic parameters were also tested by spearman's correlation coefficient (p < 0.05). The presence of brown tumors, vascular calcifications, and acroosteolysis on the hands was also evaluated. Results: Mandibular cortical index was strongly correlated with the phalangeal cortical index (p = 0.000). Phalangeal cortical index and trabecular bone pattern of hand/wrist correlated with PTH levels (0.002 and 0.000, respectively). Brown tumors occurred in four CKD patients, while both vascular calcifications and acroosteolysis were observed in 19 patients. Conclusion: There is a significant correlation between the morphological changes caused by secondary hyperparathyroidism in hand and jaw bones. The morphological status can be assessed using the mandibular cortical index, besides the phalangeal cortical index. The latter correlates well with parathyroid hormone levels of advanced chronic kidney disease. Clinical relevance: Panoramic images reveal morphological changes in the jaw bone, indicating likewise changes in the hand/wrist in severe secondary hyperparathyroidism. The severity of the bone changes may be a reflection of the parathyroid hormone levels in advanced chronic kidney disease. © 2012 Springer-Verlag.

Cálculo de coeficientes de arrasto para satélites artificiais

Pós-graduação em Física - FEG

Caracterização química, propriedades ópticas e modelagem de filmes de carbono amorfo hidrogenado halogenado e similares produzidos por deposição à plasma

Pós-graduação em Ciência e Tecnologia de Materiais - FC

A LDB e o impacto da qualificação dos docentes nos indicadores de desempenho dos cursos de graduação da UFPA

Este estudo tem como objetivo avaliar o impacto da qualificação (stricto sensu) realizada pelos docentes da UFPA, no período de 1985 a 2009, nos indicadores taxas de sucesso e taxa de evasão do ensino de graduação da instituição.Inicialmente foi realizada a contextualização do ensino superior brasileiro antes e depois da aprovação da atual Lei de Diretrizes e Bases da Educação, onde se buscou caracterizar a universidade enquanto instituição e descrever a trajetória da pós-graduação no Brasil. Após a identificação dos institutos e cursos da UFPA foram coletados, junto aos anuários estatísticos, relatórios de gestão e sistemas oficiais da instituição, os dados relativos à qualificação de docentes, ao número alunos ingressantes, concluintes e matriculados. Estas informações foram armazenadas e processadas por um sistema informatizado criado pela pesquisadora para possibilitar a realização de cálculos e promover associações entre os dados referentes à qualificação docente e os indicadores que mensuram a graduação da UFPA. O sistema identificou a existência de relação entre a qualificação e as taxas de sucesso e de evasão, e, com o coeficiente de correlação de Pearson foi possível medir o nível dessa relação. Concluiu-se, através das análises estatísticas e tendo por base os marcos teóricos, que embora o número de docentes qualificados tenha aumentado, a taxa de sucesso não cresceu na mesma proporção. Inferiu-se que o aumento da qualificação dentro da instituição foi decorrente da LDB, o que tornou possível afirmar que a LDB intensificou a política de qualificação docente, porém, não melhorou os indicadores que mensuram a graduação da UFPA. Assim sendo, o estudo comprovou que não basta qualificar docentes. Outros fatores interferem na melhoria dos indicadores de desempenho do ensino de graduação. Espera-se, com esta pesquisa, suscitar a reflexão e o debate acerca do ensino de graduação na UFPA junto à gestão dos cursos e à Pró-reitora de Graduação, bem como contribuir com o direcionamento das políticas de ensino de graduação por meio da disponibilização do sistema SIAGRAD, que poderá se constituir em uma ferramenta importante para a gestão acadêmica da instituição.

Structural and optical properties of brominated plasma polymers

Novel brominated amorphous hydrogenated carbon (a-C:H:Br) films were produced by the plasma polymerization of acetylene-bromoform mixtures. The main parameter of interest was the degree of bromination, which depends on the partial pressure of bromoform in the plasma feed, expressed as a percentage of the total pressure, R-B. When bromoform is present in the feed, deposition rates of up to about 110 nm min(-1) may be obtained. The structure and composition of the films were characterized by Transmission Infrared Reflection Absorption Spectroscopy (IRRAS) and X-ray Photo-electron Spectroscopy (XPS). The latter revealed that films with atomic ratios Br:C of up to 0.58 may be produced. Surface contact angles, measured using goniometry, could be increased from similar to 63 degrees (for an unbrominated film) to similar to 90 degrees for R-B of 60 to 80%. Film surface roughness, measured using a profilometer, does not depend strongly on R-B. Optical properties the refractive index, n, absorption coefficient, alpha(E), where E is the photon energy, and the optical gap, E-g, were determined from film thicknesses and data obtained by Transmission Ultraviolet-Visible Near Infrared Spectroscopy (UVS). Control of n was possible via selection of R-B. The measured optical gap increases with increasing F-BC, the atomic ratio of Br to C in the film, and semi-empirical modeling accounts for this tendency. A typical hardness of the brominated films, determined via nano-indentation, was similar to 0.5 GPa. (C), 2013 Elsevier B.V. All rights reserved.

Color degradation of acrylic resin denture teeth as a function of liquid diet: ultraviolet-visible reflection analysis

The effect of different beverages on acrylic resin denture teeth color degradation is evaluated. Ten acrylic resin denture teeth brands were evaluated: Art Plus (AP), Biolux (BX), Biotone IPN (BI), Magister (MG), Mondial 6 (MD), Premium 6 (PR), SR Vivodent PE (SR), Trilux (TR), Trubyte Biotone (TB), and Vipi Dent Plus (VP). Teeth were immersed in staining solutions (coffee, cola, and orange juice) or artificial saliva (control) (n = 6) for 1, 7, 15, or 30 days. Specimen colors were evaluated spectrophotometrically based on the Commission Internationale d'Eclairage L*a*b* system. Color differences (Delta E) were calculated between the baseline and post-staining results. Data were evaluated by analysis of variance and Tukey test (alpha = 0.05). BI (1.82 +/- 0.95) and TR (1.78 +/- 0.72) teeth exhibited the greatest Delta E values, while BX (0.88 +/- 0.43) and MD (1.09 +/- 0.44) teeth were the lowest, regardless of solution and measurement period, and were different from BI and TR teeth (P < 0.05). Cola and coffee promoted higher denture teeth color alterations than orange juice and saliva (P < 0.05). Saliva generated the lowest denture teeth color alterations. Greater immersion times caused higher denture teeth color changes. The lifespan of removable dentures and the aesthetic satisfaction of several edentulous patients may be increased with the use of stain-resistant artificial denture teeth. (C) The Authors.

Inbreeding, Average Relatedness Coefficient and Effective Population Size In Jaffarabadi Buffaloes Raised In Brazil

The major aim of this study was to evaluate the inbreeding (F), average relatedness coefficient (AR) and effective population size (Ne) in the Jaffarabadi buffalo breed from Brazil. Pedigree information of 1,272 animals born from 1966 was used. The effective population size was calculated in two ways: first, computed via individual increase in inbreeding and second estimated by individual increase in coancestry. The known generation numbers were 1.24, 1.76 and 2.64 for complete, equivalent and maximum generation, respectively. The effective size computed via individual increase in coancestry was small with a value of 10.82 +/- 1.29. The effective size computed by individual increase in inbreeding (10.40 +/- 3.69) was very similar but a little smaller than the previous reported value. The average values of F and AR for the population reference (1,059) were 4.22 and 12.5 percent. The mean of F for inbred animals (319) was 14.0%. The F and AR means were 5.7 and 13.3% for animals with at least 1.5 known equivalent generation and 9.3 and 15.97% for individuals having at least 2.5 equivalent generations known. It was found 78 matings between half sibs (6.14%) and 67 matings (5.27%) between parent-offspring. The estimated inbreeding increase per generation by considering maximum generation, complete generation and equivalent generation were 1.21%, 5.18% and 3.57%, respectively. Considering the uncompleted pedigree, the estimated inbreeding for the reference population could be underestimated.

A Reference Architecture based on Reflection for Self-adaptive Software

Self-adaptive Software (SaS) presents specific characteristics compared to traditional ones, as it makes possible adaptations to be incorporated at runtime. These adaptations, when manually performed, normally become an onerous, error-prone activity. In this scenario, automated approaches have been proposed to support such adaptations; however, the development of SaS is not a trivial task. In parallel, reference architectures are reusable artifacts that aggregate the knowledge of architectures of software systems in specific domains. They have facilitated the development, standardization, and evolution of systems of those domains. In spite of their relevance, in the SaS domain, reference architectures that could support a more systematic development of SaS are not found yet. Considering this context, the main contribution of this paper is to present a reference architecture based on reflection for SaS, named RA4SaS (Reference Architecture for SaS). Its main purpose is to support the development of SaS that presents adaptations at runtime. To show the viability of this reference architecture, a case study is presented. As result, it has been observed that RA4SaS has presented good perspective to efficiently contribute to the area of SaS.

Fast-Evolving Mitochondrial DNA in Ceriantharia: A Reflection of Hexacorallia Paraphyly?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sound absorption coefficient in situ: An alternative for estimating soil loss factors

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The symbology of the sea in Lygia Bojunga Nunes's work: a reflection on utopian and dystopian framing

The ambivalent image of the sea is recurrent in Bojunga Nunes’s work. It receives a lot of symbolic meanings in her production, being sometimes a positive and sometimes a negative element. Thus, the sea is used in a utopic way, as a place for pleasure and leisure, and in a dystopic way, as scenery of a rite of passage, which includes the pain and suffering, part of the rite of passage that characterizes the bildungsromans. So, if in some texts the sea assumes a utopic character, being a place of snuggle, security, the ideal to reach, in others it is represented as dystopic, a place of distress, asphyxia and death. In this text we will study the hypothesis that, even in its dark symbolic meaning, in the author’s work the sea is an element of reflection and revelation. Thereby, it assumes metaphorically a sense of magnification of the reader’s expectative, being an element of emancipation. The objective of this text is to present a reflection on the sea’s symbolism on the mentioned texts and its importance for the reader’s formation.

Transmission coefficient and two-fold degenerate discrete spectrum of spin-1 bosons in a double-step potential

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Compact setup for reflection holography with Bi12TiO 20 crystals

A novel optical setup for imaging through reflection holography with Bi12TiO20 (BTO) sillenite photorefractive crystals is proposed. Aiming a compact, robust and simple optical setup the lensless Denisiuk arrangement was chosen, using a He-Ne red laser as light source. In this setup the holographic medium is placed between the light source and the object. The beam impinging the crystal front face is the reference one, while the light scattered by the surface is the object beam in a holographic recording by diffusion. In order to allow the readout of the diffracted wave only and to keep the setup simplicity a polarizing beam splitter cube (PBS) was positioned at the BTO input. The reference beam is s-polarized (polarization direction perpendicular to the table top) and the crystal. 〈001〉-axis is rotated by an angle γ with respect to the input polarization in order to make the transmitted object beam and the diffracted beam to have orthogonal polarizations. While the transmitted wave is reflected by the PBS at a right angle, the diffracted wave carrying the holographic reconstruction of the object passes through the PBS, being collected by a positive lens in order to form the holographic image at a CCD camera. The holographic recording with the grating vector is parallel to the 〈100〉-axis. An expression for the diffracted wave intensity as a function of γ was derived, and this relation was experimentally investigated. © 2008 American Institute of Physics.