Context-awareness privacy in data communications

Internet users consume online targeted advertising based on information collected about them and voluntarily share personal information in social networks. Sensor information and data from smart-phones is collected and used by applications, sometimes in unclear ways. As it happens today with smartphones, in the near future sensors will be shipped in all types of connected devices, enabling ubiquitous information gathering from the physical environment, enabling the vision of Ambient Intelligence. The value of gathered data, if not obvious, can be harnessed through data mining techniques and put to use by enabling personalized and tailored services as well as business intelligence practices, fueling the digital economy. However, the ever-expanding information gathering and use undermines the privacy conceptions of the past. Natural social practices of managing privacy in daily relations are overridden by socially-awkward communication tools, service providers struggle with security issues resulting in harmful data leaks, governments use mass surveillance techniques, the incentives of the digital economy threaten consumer privacy, and the advancement of consumergrade data-gathering technology enables new inter-personal abuses. A wide range of fields attempts to address technology-related privacy problems, however they vary immensely in terms of assumptions, scope and approach. Privacy of future use cases is typically handled vertically, instead of building upon previous work that can be re-contextualized, while current privacy problems are typically addressed per type in a more focused way. Because significant effort was required to make sense of the relations and structure of privacy-related work, this thesis attempts to transmit a structured view of it. It is multi-disciplinary - from cryptography to economics, including distributed systems and information theory - and addresses privacy issues of different natures. As existing work is framed and discussed, the contributions to the state-of-theart done in the scope of this thesis are presented. The contributions add to five distinct areas: 1) identity in distributed systems; 2) future context-aware services; 3) event-based context management; 4) low-latency information flow control; 5) high-dimensional dataset anonymity. Finally, having laid out such landscape of the privacy-preserving work, the current and future privacy challenges are discussed, considering not only technical but also socio-economic perspectives.

Investigating wetting characteristics on microstructured surfaces for superhydrophobicity and metal microcasting

The engineering of liquid behavior on surfaces is important for infrastructure, transportation, manufacturing, and sensing. Surfaces can be rendered superhydrophobic by microstructuring, and superhydrophobic devices could lead to practical corrosion inhibition, self-cleaning, fluid flow control, and surface drag reduction. To more fully understand how liquid interacts with microstructured surfaces, this dissertation introduces a direct method for determining droplet solid-liquid-vapor interfacial geometry on microstructured surfaces. The technique performs metrology on molten metal droplets deposited onto microstructured surfaces and then frozen. Unlike other techniques, this visualization technique can be used on large areas of curved and opaque microstructured surfaces to determine contact line. This dissertation also presents measurements and models for how curvature and flexing of microstructured polymers affects hydrophobicity. Increasing curvature of microstructured surfaces leads to decreased slide angle for liquid droplets suspended on the surface asperities. For a surface with regularly spaced asperities, as curvature becomes more positive, droplets suspended on the tops of asperities are suspended on fewer asperities. Curvature affects superhydrophobicity because microscopic curvature changes solid-liquid interaction, pitch is altered, and curvature changes the shape of the three phase contact line. This dissertation presents a model of droplet interactions with curved microstructured surfaces that can be used to design microstructure geometries that maintain the suspension of a droplet when curved surfaces are covered with microstructured polymers. Controlling droplet dynamics could improve microfluidic devices and the shedding of liquids from expensive equipment, preventing corrosion and detrimental performance. This dissertation demonstrates redirection of dynamic droplet spray with anisotropic microstructures. Superhydrophobic microstructured surfaces can be economically fabricated using metal embossing masters, so this dissertation describes casting-based microfabrication of metal microstructures and nanostructures. Low melting temperature metal was cast into flexible silicone molds which were themselves cast from microfabricated silicon templates. The flexibility of the silicone mold permits casting of curved surfaces, which this dissertation demonstrates by fabricating a cylindrical metal roller with microstructures. The metal microstructures can be in turn used as a reusable molding tool. This dissertation also describes an industrial investment casting process to produce aluminum molds having integrated microstructures. Unlike conventional micromolding tools, the aluminum mold was large and had complex curved surfaces. The aluminum was cast into curved microstructured ceramic molds which were themselves cast from curved microstructured rubber. Many structures were successfully cast into the aluminum with excellent replication fidelity, including circular, square, and triangular holes. This dissertation demonstrates molding of large, curved surfaces having surface microstructures using the aluminum mold. This work contributes a more full understanding of the phenomenon of superhydrophobicity and techniques for the economic fabrication of superhydrophobic microstructures.

Computational modelling of non-equilibrium condensing steam flows in low-pressure steam turbines

The steam turbines play a significant role in global power generation. Especially, research on low pressure (LP) steam turbine stages is of special importance for steam turbine man- ufactures, vendors, power plant owners and the scientific community due to their lower efficiency than the high pressure steam turbine stages. Because of condensation, the last stages of LP turbine experience irreversible thermodynamic losses, aerodynamic losses and erosion in turbine blades. Additionally, an LP steam turbine requires maintenance due to moisture generation, and therefore, it is also affecting on the turbine reliability. Therefore, the design of energy efficient LP steam turbines requires a comprehensive analysis of condensation phenomena and corresponding losses occurring in the steam tur- bine either by experiments or with numerical simulations. The aim of the present work is to apply computational fluid dynamics (CFD) to enhance the existing knowledge and understanding of condensing steam flows and loss mechanisms that occur due to the irre- versible heat and mass transfer during the condensation process in an LP steam turbine. Throughout this work, two commercial CFD codes were used to model non-equilibrium condensing steam flows. The Eulerian-Eulerian approach was utilised in which the mix- ture of vapour and liquid phases was solved by Reynolds-averaged Navier-Stokes equa- tions. The nucleation process was modelled with the classical nucleation theory, and two different droplet growth models were used to predict the droplet growth rate. The flow turbulence was solved by employing the standard k-ε and the shear stress transport k-ω turbulence models. Further, both models were modified and implemented in the CFD codes. The thermodynamic properties of vapour and liquid phases were evaluated with real gas models. In this thesis, various topics, namely the influence of real gas properties, turbulence mod- elling, unsteadiness and the blade trailing edge shape on wet-steam flows, are studied with different convergent-divergent nozzles, turbine stator cascade and 3D turbine stator-rotor stage. The simulated results of this study were evaluated and discussed together with the available experimental data in the literature. The grid independence study revealed that an adequate grid size is required to capture correct trends of condensation phenomena in LP turbine flows. The study shows that accurate real gas properties are important for the precise modelling of non-equilibrium condensing steam flows. The turbulence modelling revealed that the flow expansion and subsequently the rate of formation of liquid droplet nuclei and its growth process were affected by the turbulence modelling. The losses were rather sensitive to turbulence modelling as well. Based on the presented results, it could be observed that the correct computational prediction of wet-steam flows in the LP turbine requires the turbulence to be modelled accurately. The trailing edge shape of the LP turbine blades influenced the liquid droplet formulation, distribution and sizes, and loss generation. The study shows that the semicircular trailing edge shape predicted the smallest droplet sizes. The square trailing edge shape estimated greater losses. The analysis of steady and unsteady calculations of wet-steam flow exhibited that in unsteady simulations, the interaction of wakes in the rotor blade row affected the flow field. The flow unsteadiness influenced the nucleation and droplet growth processes due to the fluctuation in the Wilson point.

Leader Based Cyclic Pursuit

In this work a system of autonomous agents engaged in cyclic pursuit (under constant bearing (CB) strategy) is considered, for which one informed agent (the leader) also senses and responds to a stationary beacon. Building on the framework proposed in a previous work on beacon-referenced cyclic pursuit, necessary and suffi- cient conditions for the existence of circling equilibria in a system with one informed agent are derived, with discussion of stability and performance. In a physical testbed, the leader (robot) is equipped with a sound sensing apparatus composed of a real time embedded system, estimating direction of arrival of sound by an Interaural Level and Phase Difference Algorithm, using empirically determined phase and level signatures, and breaking front-back ambiguity with appropriate sensor placement. Furthermore a simple framework for implementing and evaluating the performance of control laws with the Robot Operating System (ROS) is proposed, demonstrated, and discussed.

Environmental risk factors for oesophageal cancer in Malawi: A case-control study

Aim There is a high burden of oesophageal cancer in Malawi with dismal outcomes. It is not known whether environmental factors are associated with oesophageal cancer. Without knowing this critical information, prevention interventions are not possible. The purpose of this analysis was to explore environmental factors associated with oesophageal cancer in the Malawian context. Methods A hospital-based case-control study of the association between environmental risk factors and oesophageal cancer was conducted at Kamuzu Central Hospital in Lilongwe, Malawi and Queen Elizabeth Central Hospital in Blantyre, Malawi. Ninety-six persons with squamous cell carcinoma and 180 controls were enrolled and analyzed. These two groups were compared for a range of environmental risk factors, using logistic regression models. Unadjusted and adjusted odds ratios and 95% confidence intervals (CI) were calculated. Results Firewood cooking, cigarette smoking, and use of white maize flour all had strong associations with squamous cell carcinoma of the oesophagus, with adjusted odds ratios of 12.6 (95% CI: 4.2-37.7), 5.4 (95% CI: 2.0-15.2) and 6.6 (95% CI: 2.3-19.3), respectively. Conclusions Several modifiable risk factors were found to be strongly associated with squamous cell carcinoma. Research is needed to confirm these associations and then determine how to intervene on these modifiable risk factors in the Malawian context.

Forecasting errors, directional accuracy and profitability of currency trading: The case of EUR/USD exchange rate

We provide a comprehensive study of out-of-sample forecasts for the EUR/USD exchange rate based on multivariate macroeconomic models and forecast combinations. We use profit maximization measures based on directional accuracy and trading strategies in addition to standard loss minimization measures. When comparing predictive accuracy and profit measures, data snooping bias free tests are used. The results indicate that forecast combinations, in particular those based on principal components of forecasts, help to improve over benchmark trading strategies, although the excess return per unit of deviation is limited.

System innovation and life cycle thinking in packaging value chain: the circularity of plastics.

Compared to other, plastic materials have registered a strong acceleration in production and consumption during the last years. Despite the existence of waste management systems, plastic_based materials are still a pervasive presence in the environment, with negative consequences on marine ecosystem and human health. The recycling is still challenging due to the growing complexity of product design, the so-called overpackaging, the insufficient and inadequate recycling infrastructure, the weak market of recycled plastics and the high cost of waste treatment and disposal. The Circular economy package, the European Strategy for plastics in a circular economy and the recent European Green Deal include very ambitious programmes to rethink the entire plastic value chain. As regards packaging, all plastic packaging will have to be 100% recyclable (or reusable) and 55% recycled by 2030. Regions are consequently called upon to set up a robust plan able to fit the European objectives. It takes on greater importance in Emilia Romagna where the Packaging valley is located. This thesis supports the definition of a strategy aimed to establish an after-use plastics economy in the region. The PhD work has set the basis and the instruments to establish the so-called Circularity Strategy with the aim to turn about 92.000t of plastic waste into profitable secondary resources. System innovation, life cycle thinking and participative backcasting method have allowed to deeply analyse the current system, orientate the problem and explore sustainable solutions through a broad stakeholder participation. A material flow analysis, accompanied by a barrier analysis, has supported the identification of the gaps between the present situation and the 2030 scenario. Eco-design for and from recycling (and a mass _based recycling rate (based on the effective amount of plastic wastes turned into secondary plastics), valorized by a value_based indicator, are the key-points of the action plan.

Development and testing of innovative methodologies for modelling and control of normal and knocking combustion and implementation of novel rapid prototyping solutions

The thesis work deals with topics that led to the development of innovative control-oriented models and control algorithms for modern gasoline engines. Knock in boosted spark ignition engines is the widest topic discussed in this document because it remains one of the most limiting factors for maximizing combustion efficiency in this kind of engine. First chapter is thus focused on knock and a wide literature review is proposed to summarize the preliminary knowledge that even represents the background and the reference for discussed activities. Most relevant results achieved during PhD course in the field of knock modelling and control are then presented, describing every control-oriented model that led to the development of an adaptive model-based combustion control system. The complete controller has been developed in the context of the collaboration with Ferrari GT and it allowed to completely redefine the knock intensity evaluation as well as the combustion phase control. The second chapter is focused on the activity related to a prototyping Port Water Injection system that has been developed and tested on a turbocharged spark ignition engine, within the collaboration with Magneti Marelli. Such system and the effects of injected water on the combustion process were then modeled in a 1-D simulation environment (GT Power). Third chapter shows the development and validation of a control-oriented model for the real-time calculation of exhaust gas temperature that represents another important limitation to the performance increase in modern boosted engines. Indeed, modelling of exhaust gas temperature and thermocouple behavior are themes that play a key role in the optimization of combustion and catalyst efficiency.

RNA interference technology as a potential control method for fruit and horticultural crops pathogens Botrytis cinerea and Plasmopara viticola

Chapter 1, a general introduction on Botrytis cinerea and its threat to crop production is presented. What Botrytis looks like, its life cycle, why it is a threat to agricultural production, its worldwide pest status, and its current state of management is further elaborated on. Chapter 2, a general introduction on Plasmopara viticola, its threat to grape production and management strategies presented. Chapter 3, titled " RNA Interference Strategies for Future Management of Plant Pathogenic Fungi: Prospects and Challenges ", presents the rapid improvement and extensive implementation of RNA interference (RNAi) technology for the management of fungal pathogens. In this chapter, we describe the application of exogenous RNAi involved in plant pathogenic fungi and discuss dsRNA production, formulation, and RNAi delivery methods. Chapter 4, titled " Exogenous dsRNAs against chitin synthase and glucan synthase genes suppress the growth of the pathogenic fungus Botrytis cinerea " addresses two important questions: Is RNAi technology functional for B. cinerea control ? And which target genes can be exploited for RNAi-based B.cinerea disease control ? Upon target genes selections, an exogenous RNAi protocol was set up and we could effectively deliver a known dose of bacterially produced double stranded RNA (dsRNA) to induce RNAi in B. cinerea. Chapter 5, titled " Double-Stranded RNA Targeting Dicer-Like Genes Compromises the Pathogenicity of Plasmopara viticola on Grapevine “, which deals mainly on RNAi induction against Plasmopara viticola. This chapter addresses two main questions: Is RNAi technology functional in contrasting Plasmopara viticola? And which target genes can be exploited for RNAi-based disease control in Plasmopara viticola?. In the last Chapter (Chapter 6) titled “General discussions and perspectives for future research”, the major research findings from this thesis are discussed together with perspectives for future research.

Interação entre consumo alimentar e polimorfismos da GSTM1 e GSTT1 no risco para o câncer de cabeça e pescoço: estudo caso-controle em São Paulo, Brasil

O objetivo foi investigar a interação entre fatores dietéticos e polimorfismos de enzimas de metabolização de xenobióticos (GSTM1 e GSTT1) associadas ao câncer de cabeça e pescoço em um estudo caso controle de base hospitalar, no Município de São Paulo, Brasil. Participaram 103 casos incidentes, histologicamente confirmados, e 101 controles. O consumo alimentar foi obtido por um questionário de frequência alimentar validado. Os polimorfismos GSTM1 e GSTT1 foram avaliados pelo método PCR. Observou-se aumento de risco no mais alto tercil de consumo de carne bovina na presença do alelo nulo da GSTM1 (OR = 10,79; IC95%: 2,17-53,64) e GSTT1 (OR = 3,41; IC95%: 0,43-27,21). Considerando-se a razão entre alimentos de origem animal e vegetal, verificou-se para o tercil intermediário a OR = 2,02 (IC95%: 0,24-16,0) e no tercil superior OR = 3,23 (IC95%: 0,40-25,92). Os resultados apontam para uma possível interação entre o consumo de carne e variantes polimórficas dos genes GSTM1 e GSTT1 na modulação do risco para o câncer de cabeça e pescoço, influenciados pelo consumo de alimentos de origem vegetal.

Diet and cancer in Northeast Brazil: evaluation of eating habits and food group consumption in relation to breast cancer

Realizou-se um estudo do tipo caso-controle de base hospitalar no Município de João Pessoa, Paraíba, Brasil. Participaram 183 indivíduos (89 casos e 94 controles) na faixa etária entre 30 e 80 anos, com pareamento por idade. O consumo alimentar de casos e controles foi avaliado por alimentos e grupos de alimentos categorizados em tercis de consumo. A estimativa dos valores da odds ratio (OR) e intervalos de confiança de 95% (IC95%) foi realizada por regressão logística múltipla não-condicional. O consumo de frutas e sucos, feijão e leite e derivados apresentou uma forte associação com a redução no risco de câncer de mama. O consumo de carnes vermelhas e de carnes fritas esteve positivamente associado ao risco de câncer de mama (carne vermelha - OR = 4.30; IC95%: 1,74-10,67; p = 0,00). Não foi observada associação entre o consumo dos grupos de vegetais e embutidos com o câncer de mama. Carne vermelha e carnes fritas podem ser fatores de risco, e o consumo de frutas, feijão e leite e derivados pode atuar como protetor do câncer de mama

Padrões dietéticos e câncer oral e de faringe: um estudo caso-controle no Rio de Janeiro, Brasil

Investigou-se a associação entre padrões de dieta e câncer oral, como parte de um estudo multicêntrico latino-americano caso-controle de base hospitalar e incluiu 210 casos incidentes e 251 controles. Dados de consumo alimentar foram coletados por Questionário de Freqüência de Consumo Alimentar (QFCA). Análise fatorial identificou padrões alimentares, que foram categorizados em tercis. Calculou-se odds ratio (OR) com intervalo de 95 por cento de confiança (IC95 por cento ) por regressão logística múltipla não condicional. Os padrões "prudente", caracterizado em maioria por frutas e vegetais, e o padrão tradicional, por arroz e feijão, apresentaram associação inversa com o câncer oral para o mais elevado tercil, respectivamente: OR = 0,44; IC95 por cento : 0,25-0,75, valor de p de tendência (ptend) = 0,03; OR = 0,53; IC95 por cento : 0,30-0,93, ptend = 0,06. O padrão "lanches" não foi associado ao câncer oral. Além da proteção ao câncer oral conferida por dieta rica em vegetais e frutas, nossos dados sugerem que a dieta "tradicional" brasileira contendo em sua maioria arroz e feijão pode oferecer proteção ao câncer oral

Do simple prudent health behaviours protect men from myocardial infarction?

Background We tested whether behaviours such as discarding obvious fat on meat, cessation of smoking, avoidance of passive smoking, habitual use of reduced fat milk, prudent consumption of alcohol and regular but moderate physical exercise are associated with a reduction of cardiovascular risk. Methods This was a population-based case-control study done in Perth, Western Australia. The cases (n = 336) were men aged 27-64 years with a first-ever acute myocardial infarction (AMI) during the period 1992-1993, and who survived at least 28 days. The controls (n = 735) were participants in a population-based survey of cardiovascular risk factors conducted during May-November 1994. Both groups completed the same questionnaire and the data were analysed with multiple logistic regression using backward elimination technique. Results Among men aged 27-64 years simple measures such as participation in non-vigorous exercise (odds ratio [OR] = 0.5, 95% CI : 0.4-0.7), and avoidance of added salt (OR = 0.6, 95% CI : 0.4-0.9) are associated with significant and Important protection from AMI. Conclusion After 25 years of falling mortality in Australia, lifestyles can still be significantly improved to reduce heart disease even further.

The co-segregation of psychosis and selected physical disorders within families of patients with psychosis versus well controls

While it has been reported that individuals with psychosis are at increased or decreased risk of various physical disorders such as cancer and rheumatoid arthritis, there has been less research on the co-segregation of physical disorders within the first-degree relatives of those with psychosis compared to relatives of well controls. The aim of this study was to examine these issues in an epidemiologically informed catchment-area based case-control study. Patients with psychosis were drawn from a prevalence study undertaken as part of the Australian National Mental Health Survey. In addition, we recruited well controls who resided in the same catchment area. For each subject, we drew pedigrees and used a structured checklist to assess the presence of selected psychiatric disorders, and selected disorders such as multiple sclerosis, epilepsy, spina bifida, thyroid disorders, diabetes, asthma and eczema. Data based on pedigrees from 293 individuals with psychosis and 292 well controls was available. As expected, the odds of havingschizophrenia and affective disorders were significantly increased in the families of cases versus controls. The odds of havingeczema were significantly reduced in the relatives of those with psychosis. All other disorders occurred with equal frequency in cases versus control pedigrees. Current theories of eczema suggest that an absence of early life exposure to antigens and infectious agents may fail to prime the na¨ıve immune system, and leave the person at increased risk of eczema. The results of this study suggest that genetic andror environmental factors that facilitate psychosis may protect against eczema. The Stanley Foundation supported this project.

Risk factors for sudden unexpected cardiac death in Tasmanian men

Background: Sudden unexpected cardiac death (SUCD) accounts for approximately 25% of deaths from ischaemic heart disease (IHD) but is relatively poorly understood because of the difficulties involved in researching aetiology. Clinical differences between instances of SUCD and those cases of acute chest pain that survive long enough to be proven as myocardial infarction but are eventually fatal might reflect differences in aetiology. Aims: To determine the risk factors for sudden unexpected cardiac death in Tasmanian men. Methods: A population-based case-control method was used with the study population, an estimated 125,225 men aged 25-74 years living in the island State of Tasmania, Australia. The case group of 102 men who had a SUCD was validated using necropsy reports, hospital records and information provided by the usual general practitioner. Cases were matched with 204 community controls. Spouses or partners of eligible subjects answered a detailed questionnaire. Multi-variate odds ratios (ORs) for risk factors were calculated using stepwise analysis. Results: Risk factors measured included: smoking habit, treated hypertension, hypercholesterolaemia, diabetes mellitus, family history of LHD, alcohol intake and exercise habits. Independent risk factors for SUCD were: history of diabetes mellitus (OR=4.2, 95% CI: 1.39, 12.81), current smoking status (OR=3.5, 95% CI: 1.80, 6.82), and family history of IHD (OR=2.6, 95% CI: 1.34, 4.92). Conclusions: Some accepted risk factors for acute myocardial infarction (AMI) also predict sudden death in men with no history of coronary disease. Efforts to reduce smoking, the incidence of diabetes mellitus and mean blood pressure must be continued as SUCD is, by definition, untreatable but is potentially avoidable in many instances.