Caracterização de um latossolo em sistemas agroflorestais e mata com o uso de análise estatística multivariada

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Processamento, caracterização microestrutural e propriedades elásticas de metais celulares do sistema Ti-6Al-4V para fins de regeneração óssea

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Estudo experimental do polietileno poroso de alta densidade (MEDPOR) fixado ao leito cirúrgico corticalizado e decorticalizado: análise histológica em cães

The aim of this study was to evaluate the influence of the bed in High Density Porous Polyethylene (Medpor) implants integration. Two different kind of beds -- corticalized and decorticalized -- were made in six dogs. The animals were killed thirty, sixty and ninety days after implantation. Blocks including implant and adjacent bone were harvested, submitted to histological procedures, stained in hematoxiline-eosine and analyzed in optic microscope. The results demonstrated an absence of infection and foreign body reaction associated with High Density Porous Polyethylene (Medpor) implants. Furthermore, bony and fibrovascular ingrowth could be observed into its pores. The best integration was noted in decorticalized group, in which occurred a greater bony and fibrovascular ingrowth in comparison to the corticalized group

Differential Effect of Solution Conditions on the Conformation of the Actinoporins Sticholysin II and Equinatoxin II

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da acessibilidade aos sítios ativos e desativação na desidratação do glicerol utilizando catalisadores zeolíticos lamelares

Pós-graduação em Química - IQ

Análise comparativa da expressão de RNAm de aquaporinas em sapos hidratados e submetidos ao estresse hídrico

A maior parte das espécies de anuros adultos terrestres está constantemente exposta a altas taxas de perda de água por evaporação através da pele. A manutenção do balanço hídrico nestes animais envolve a absorção de água através da mancha pélvica, uma região da pele ventral altamente permeável à água, além da reabsorção de água a partir do fluido filtrado nos glomérulos ao longo do sistema tubular dos néfrons, bem como a partir da urina formada e estocada na bexiga urinária, em resposta à arginina vasotocina (AVT). O movimento de água através da membrana plasmática ocorre através de poros formados por proteínas integrais de membrana, conhecidas como aquaporinas (AQPs), e a regulação osmótica exercida pelo AVT envolve translocação de vesículas contendo AQPs do citoplasma para a membrana apical e, provavelmente, alteração na expressão de alguns tipos de AQPs. Resultados previamente obtidos no laboratório demonstraram a existência de variação interespecífica nas taxas de reidratação de três espécies de Rhinella, sendo que R. ornata apresentou taxas de reidratação significativamente menores que aquelas apresentadas por R. schneideri e R. icterica. Uma possível explicação para esta variação em taxas de reidratação poderia envolver diferenças na expressão de aquaporinas na mancha pélvica. Desta forma, o objetivo do projeto foi identificar e quantificar a expressão do RNAm de aquaporinas do tipo 1 (AQP-1) e de aquaporinas AVT dependentes pertencentes ao tipo 2a (AQP-t2 e AQP-t3) - quanto à classificação das AQPs entenda-se AQP -t aquelas que apresentam sequência gênica referentes a Rinella marina AQP -h a Hyla japonica.- nos seguintes tecidos: pele dorsal e pele ventral (mancha pélvica) de espécimes de R. schneideri e R. ornata totalmente hidratados e após submissão à desidratação correspondente a 70% da massa corpórea padrão. As hipótese ...

Obtenção e caracterização de suporte de regeneração óssea de dióxido de titânio

Due to complications caused by metallic implants in the replacement of bone tissue, the biological application of ceramics raised and became a viable alternative. The titania has the ability to promote bone tissue regeneration based on its structure, mechanical and biologically properties compatibility. The present work aims at obtaining and characterization of Titania (TiO2) porous ceramics produced by the polymeric sponge method (replica method). Polyurethane sponge with 10 ppi and 15 ppi (pores per linear inch) were used. The process differentiation is the air blower used to remove excess slurry. The ceramics sponges were dried in an oven, then pre-sintered at 1000 o C and sintered at 1450 o C. The effect of direct sintering at 1450 o C was also assessed. The percentage of solids used to prepare the slurry was 40 to 45% by weight. To increase the surface porosity of the sponge, 20% of starch was added. There was difficulty on controlling the thickness of the slurry layers on the sponge which resulted in the variation of samples mechanical resistance. Despite this, the results obtained are quite promising for the proposed use, indicating that it is possible to obtain titania sponges with an apparent porosity of around 60%, a bulk density ranging from 40 to 47% and a compressive strength resistance – that with better control of layers depositions – can vary from 1 to 4 MPa

Utilização de biossurfactante e surfactante químico para dessorção de óleo presente em vermiculita hidrofobizada: estudo comparativo

A number of methods and products have been developed in order to eliminate or reduce the negative effects that hydrocarbons cause to the environment, including hydrophobic expanded vermiculite, used in oil residue filtering systems at gas stations. However, upon adsorbing organic compounds, the vermiculite is no longer used and is sent to landfills. The aim of the present study was to wash granular and powdered vermiculite containing oil lubricant in its pores with distilled water and solutions of 0.1% SDS surfactant and rhamnolipids, with the aim of removing the lubricant and the possibility of reusing the mineral. The greatest amount of lubricant removal was obtained through washing with 0.1% SDS and both granulometric forms. This may be associated to the industrial purification received by the surfactant. However, the biosurfactant is ecologically more viable due to its low toxicity and ease of degradability. In the readsorption tests, greatest adsorption was obtained with the granular vermiculite washed in SDS solution. In order to enable the reuse of the mineral, further tests are needed to enhance desorption/adsorption efficiency.

Eletroquimioterapia em cães e gatos

The eletrochemotherapy is a new treatment option for neoplasms that involves the application of chemotherapeutic drugs endovenously or intralesionally, associated with local severe and short duration electrical pulses. The electrical pulses promote destabilization of the cell membrane, causing transitory pore formation and facilitating the entry of chemotherapeutic agents inside the cells, increasing its cytotoxicity. This therapy allows for lower doses of chemotherapy drugs compared to conventional chemotherapy, resulting in the decrease of side effects and costs of treatment. The eletrochemotherapy has proved effective in the treatment of cancer regardless of its histological origin and location. This review aims to highlight possibilities to use this treatment in Veterinary Oncology

Síntese e caracterização de ferritas de manganês e zinco visando aplicação como agente de contraste em diagnóstico médico

This work aims to synthesize the manganese and zinc ferrite, by the polymeric precursor method, in order to obtain materials with appropriate characteristics for the application in medical diagnosis techniques. The manganese and zinc ferrite powders with the composition of Mn(1-x)ZnxFe2O4, where x=0,23, were prepared and calcined in air at different times and temperatures. The X-ray diffraction (XRD) data show that the sample calcined at 400°C crystallize as ferrite (monophase), but in an inverted spinel structure (high content of iron occupying manganese tetrahedral site and manganese occupying the iron octahedral site). The samples calcined at temperatures between 600°C and 900°C shows the secondary phase of hematite and the sample calcined at 1100oC shows to be monophase in ferrite with normal spinel structure. The monophase powders of ferrite showed a reduction in the surface area and an increasing in the pore size for higher calcination temperatures. The magnetic analysis show that the sample calcined at 400°C presents satisfactory magnetization at room temperature, however, it behaves as diamagnetic material at low temperatures (10K). The powder containing hematite, without the partial substitution of iron ions by manganese, showed to have low transition temperature, and consequently low magnetization at room temperature. The hematite, when partially substituted, provides materials with irregular magnetization at the saturation region. The powder calcined at 1100°C shows high magnetization either at room temperature or low temperature (10K)

Propriedades estruturais de géis de sílica preparados com adições de dodecil sulfato de sódio

This work aims to study the structural characteristics of silica gels obtained from the acid hydrolysis of tetraethoxysilane (TEOS) in water solutions with different concentrations of sodium dodecyl sulfate (SDS). The structural characteristics were studied in stages ranging from the wet gel to the dry stages of the gels (aerogels and xerogels). Aerogels were obtained by ambient pressure drying (APD) after silylation process using trimethylchlorosilane (TMCS) as silylating agent. Xerogels were obtained by conventional evaporating the liquid phase from non silylated gels. The samples were characterized by nitrogen adsorption and small angle X-ray scattering (SAXS). The structure of the wet gels and of the aerogels prepared with the surfactant exhibited characteristics of mass-fractal structures with fractal dimension D in the range 2.1-2.2 for the wet gels and 2.3-2.4 for the aerogels. The characteristic size  of the fractal domain reduces while the size a0 of the primary silica particle composing the fractal structure increases with the drying of the gels, in a process in which share of the porosity is eliminated. Aerogels exhibited typical values for the specific surface of 900 m2g-1 and of 3.5 cm3.g-1 for the total pore volume. These values are correspondingly comparable to those of the aerogels prepared by supercritical drying, since the silylation process replaces hydrophilic –OH groups by hydrophobic –Si-R3 ones, inhibiting the porosity elimination on drying. The silica particle size also increases lightly with the silylation because the attachment of the –Si-R3 groups on the silica surface. The pore size distribution curves of the aerogels are similar for all samples exhibiting a maximum in around 40 nm, independent the concentration of surfactant. This suggests that the characteristic size of 40 nm is due to the association of surfactant micelles... (Complete abstract click electronic access below)

Estudo da concentração de material particulado em ambientes internos e externos de bibliotecas

Our twenty-first century society and the rhythm of life and work we have to face in our daily routine compel us to spend most of our lifetime in closed environments, in our houses, educational institutions, hospitals, airports, amongst as many others. The study of the air quality in internal environments (IAQ) is very important for monitoring people’s health effects and their environmental comfort in these locations. One essential parameter to analyze this measure is to evaluate the concentration of dispersed particulates in the air, specially focusing on those thinner particles (below the diameter of 2,5 μm), they can pose serious risks for human being because they can remain in the lungs, penetrate through the pores of our skin, amongst other harmful effects on human’s health. In this work the air quality inside the public library Profª Josina Vasques Ferrari and at Unesp public state library was evaluated, both located in Itapeva, as well as a third one, inside the Communitarian Library of the Federal University in Carlos (UFSCar) from march to may in 2012. In those environments it was analyzed if the concentration of particulates pose any real treat to the users. The equipment used for particle sampling in real time was DataRam 4 (Model DR 4000). The results given for those concentrations of particulates in both internal and external environments revealed figures within the safe standard established by the WHO (World Health Organization), from 25 to μg/m³, the only exception occurred on the fifth floor of the UFSCar library, where the average for concentration stayed at 25,30 of μg/m³

Análise da curva de resfriamento da liga de alumínio AA 356

It is very important to study the macrostructure of a material in the crude state of solidification due to influence the mechanical properties, as well as the study of their cooling curve. In the present work was to study the alloy AA 356, its macrostructure and its cooling curve. The material was cast in two different molds, a sand and other metallic. In this paper we study the differences in its macrostructure and its cooling curves. In macrostructure can observe the absence of the three zones of solidification and the presence of large pores because of moisture in the sand. In the sample taken from the metal mold can observe the three zones of solidification: a coquilhada, columnar and equiaxed

Imobilização de fosfatos em microesferas poliméricas contendo biochar: preparação, caracterização e liberação lenta em sistemas aquosos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cerâmicas porosas a base de zircônia na forma de filmes suportados preparados a partir de emulsões

Pós-graduação em Química - IQ