Screening of melon populations for resistance to Didymella bryoniae in greenhouse and plastic tunnel conditions

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Germinação das unidades de dispersão de gervão-roxo

Foram conduzidos dois experimentos com o objetivo de estudar a germinação das unidades de dispersão de gervão-roxo [Stachytarpheta cayennesis (L.C. Rich) Vahl], removidas de espigas que haviam sido armazenadas após terem sido colhidas em dois estádios de maturação. As unidades de dispersão foram removidas de espigas que se encontravam armazenadas por seis ou 18 meses e que haviam sido colhidas com a coloração verde ou palha. No primeiro experimento, as unidades de dispersão, incubadas no interior de caixas plásticas tipo gerbox, foram distribuídas em folhas de papel germitest umedecidas com água destilada, sob temperatura de 20ºC(noite) e 30ºC (dia), na presença ou ausência de fotoperíodo de 12 horas, por 28 dias. No segundo experimento, as unidades de dispersão, incubadas no interior de caixas plásticas, foram distribuídas em folhas de papel germitest umedecidas com água destilada ou com solução de KNO3, sob temperatura de 20ºC(noite) e 30ºC (dia), na presença ou ausência de fotoperíodo de 12 horas, por 28 dias. A maior germinação foi obtida a partir de unidades de dispersão provenientes de espigas colhidas com a coloração palha e que se encontravam armazenadas por seis meses. A presença da luz, e o emprego de nitrato na ausência de luz, favoreceram a germinação das unidades de dispersão retiradas da parte apical e basal de espigas colhidas com a coloração verde ou palha e, armazenadas por seis ou 18 meses.

A probabilistic model for elastic-plastic fracture analysis of plane and axisymmetric structures

This work presents a methodology for elastic-plastic fracture reliability analysis of plane and axisymmetric structures. The structural reliability analysis is accomplished by means of the FORM analytical method. The virtual crack extension technique based on a direct minimization of potencial energy is utililized for the calculation of the energy release rate. Results are presented to illustrate the performance of the adopted methodology.

Elasto-plastic structural stability of arches

The elastic-plastic structural stability behaviour of arches is analysed in the present work.The application of the developed mathematical model, allows to determine the elastic-plastic equilibrium paths, looking for critical points, bifurcation or limit, along those paths, associated to the critical load, in case it comes to happen.The equilibrium paths in the elastic-plastic behaviour when compared with the paths in the linear elastic behaviour, may show that, due to influence of the material plasticity, modifications paths appear and consequently alterations in the values of its critical loads.

Persistence and effectiveness of pyrethroids in plastic strips against Varroa jacobsoni (Acari : Varroidae) and mite resistance in a mediterranean area

An apiary trial was conducted in 1997 in Sardinia, Italy, to verify the effectiveness of fluvalinate in polyvinyl chloride strips and flumethrin in polyethylene strips against Varroa jacobsoni Oudemans. Two indices to evaluate the efficacy of the treatments were adopted: percentage change in mite infestation of worker-sealed brood cells considering only treated hives and percentage change in mite mortality, and the natural variation in mite populations recorded in control hives during the trial. All acaricide treatments reduced the level of mite infestation of both sealed brood and adult bees. However, their effectiveness was slightly reduced in comparison to previous studies because of mite resistance phenomena. Portions of polyethylene strips of flumethrin from treated hives were sampled weekly to determine acaricide persistence using gas chromatography. After 4 wk, a slight reduction (approximate to9%) of the active ingredient content was observed, A laboratory bioassay also was performed to establish the resistance of adult female mites to fluvalinate, Mites were sampled from the experimental apiary and from various Sardinian apiaries which had primarily been subjected to fluvalinate applications in plastic strips or wood inserts for years. Mite resistance varied from 0 to 96%, depending on the acaricide management adopted, the lowest resistance level occurred in an apiary where pyrethroids had never been used, whereas the highest level occurred in an apiary with intensive use of fluvalinate in wood inserts.

Plastic debris collars on juvenile carcharhinid sharks (Rhizoprionodon lalandii) in southwest Atlantic

Three juvenile Brazilian sharpnose sharks (Rhizoprionodon lalandii) caught in gillnets in southeast Brazil, southwest Atlantic, were found with plastic debris rings around their gill or mouth region. The rings caused severe abrasion on the sharks' tissues as the animal grew, the collars probably hampering normal feeding and/or ventilation since two of the collared individuals were emaciated. The rings were identified as detachable lid parts from plastic bottles, likely thrown overboard by fishery and/or recreation boats. As several carcharhinid shark species dwells and reproduce in shallow waters, the impact of discarded plastic debris likely is greater on this shark type. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Periodontal plastic surgery associated with treatment for the removal of gingival overgrowth

Background: Excisional biopsies of gingival overgrowths, performed with safety margins, frequently result in mucogingival defects. These defects may produce esthetic problems and increase the chances of dentin hyperesthesia and its possibility of hindering oral hygiene. Methods: Two clinical cases are reported in which gingival overgrowths were removed by excisional biopsy, resulting in unsightly defects. The first clinical case presents an invasive approach for the treatment of a recurrent pyogenic granuloma in the anterior maxilla, and the second depicts a complete removal of a peripheral odontogenic fibroma in the posterior maxilla. In both situations, the soft-tissue defects were repaired by periodontal plastic surgery, including a laterally positioned flap and a coronally positioned flap, respectively. Results: Periodontal plastic surgery successfully restored the defects that resulted from biopsies, and no recurrence has been noticed in the 5-year postoperative follow-up period. Conclusions: The combination of biopsy and periodontal plastic surgery in a one-step procedure seems to be suitable to remove gingival overgrowths in most areas of the mouth, regardless of esthetic significance. Such procedures seem to restore gingival health, encourage healing, and create both esthetics and function in the excised area.

Initial concentration profile influence on migration measurements from plastic packaging: A simulation study

Migration of components from plastic packaging into foodstuffs or into medicines is a very important issue, concerning public health. Using experimental techniques, like gas chromatography-mass spectrometry, these essays measure total migration and specific migration of components from plastic packaging. This work presents an explanation and applications of a numerical technique tool for this measurement, allowing the comprehension of the diffusion process and the estimate of component migration in difficult or impractical measurements. As an application example, the non-uniform influence of initial concentration profile on the migration is presented, demonstrating the necessity of this profile determination for high quality considerations on involved metrology.

Effect of plastic film mulch on the production of butterhead lettuce cultivars under protected cultivation

The study was performed in a greenhouse with the aim of evaluating the production of butterhead lettuce cultivars with and without plastic film mulch in the summer. The cultivars studied were 'Elisa', 'Lídia', 'Herman' and 'Luísa'. The experimental design was a split plot, in which the main plot was plastic film mulch (with or without black polyethylene film) and the subplots were the cultivars, with three repetitions. The seedlings were grown in Styrofoam trays of 288 cells and transplanted 25 days after seeding in a space of 25 × 25 cm. Harvests were carried out 45 days after transplanting and the following variables were determined: fresh and dry weights of the aerial part, number of leaves per plant, plant height and the longitudinal and transverse diameters of the plant. Significant differences were found only among the cultivars for the characteristics studied, with no cover × cultivar interaction. Fresh weight of the aerial part of 'Lídia' (270.9 g) was greater than that of 'Herman' (142.5 g), but did not differ from those of 'Luísa' (229.8 g) or 'Elisa' (204.8). The dry weight of the aerial part of 'Lídia' (12.4 g) differed statistically only with respect to that of 'Herman' (7.9 g). The cultivars 'Luísa' and 'Elisa' had an aerial part dry weight of 11.4 and 11.2 g, respectively. The number of leaves per plant of the cultivars 'Luísa' (45.1) and 'Elisa' (43.0) was higher than for 'Herman' (24.05), but did not differ from that of the cultivar 'Lídia' (39.5). The mean transverse and longitudinal diameters, as well as the mean height of the plants, showed that 'Lídia', 'Elisa' and 'Luísa' had the greatest values. The cultivars 'Lídia', 'Elisa' and 'Luísa' were the most productive and plastic film mulch had no effect on lettuce production under protected cultivation.

The preparation of inventories and balance sheets of the natural and cultural heritage

Includes bibliography

Instantaneously measured traits may detect non-plastic ecophysiological performances in response to drought, explaining distributions of Styrax species in the Cerrado

We analyzed the differences between irrigated and non-irrigated plants of three congeneric Styrax species that present distinct distribution patterns in the physiognomies of the Cerrado vegetation in Brazil. Styrax ferrugineus showed a stomatal conductance (gs) unresponsive to soil water deficit in potted plants. This may explain the high gas exchange and photochemical efficiency found in this species, which is well adapted to the Cerrado sensu stricto (s. str.), a savanna-type vegetation. S. camporum, which is widely distributed in the Cerrado sensu lato (s. l.) areas, was the only species that exhibited increased intrinsic water use efficiency on the days of maximum water deficit. This result distinguishes S. camporum from S. pohlii, which is a forest species, since the gs of both species decreased during the days of maximum water stress. In contrast to other studies, we propose that instantaneously measured traits, such as leaf gas exchange rates and chlorophyll fluorescence, may be used to detect non-plastic performances in response to environmental stress, helping explain distinct geographical distributions of congeneric species in the Cerrado vegetation. © 2013 Springer-Verlag Berlin Heidelberg.

Espécies de Ceraeochrysa Adams (Neuroptera: Crysopidae) presentes em pomares de Citrus SPP., na Venezuela

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

A expressão do pesar nas atividades ocupacionais quando alguém querido morre

O luto pela morte de um ente querido compreende um processo de reorganização pessoal frente à perda e que por isso tende a desdobramento singulares, conforme a natureza e intensidade do vínculo. A pessoa então pode experimentar uma variedade de reações que , conforme a ocorrência e a severidade das manifestações , irão repercutir na qualidade de viver. Esta pesquisa teve o objetivo de compreender a expressão do pesar nas atividades ocupacionais quando da morte de uma pessoa significativa. A estratégia metodológica fundamentou-se na abordagem qualitativa do tipo "estudo de caso", de duas pessoas (colaboradores) que chegaram em Serviço de Pronto Atendimento a Pessoas que Sofreram Perdas. Para a coleta dos dados foram definidos três encontros, sendo que nos dois primeiros foram realizadas às entrevistas abordando aspectos da vida pessoal e ocupacional e no terceiro uma oficina de atividades, sendo disponibilizados materiais plásticos; como papel , lápis de cor, canetas esferográficas, tesoura, revistas, cola branca, cola colorida, purpurina, entre outros, com o objetivo de favorecer a livre expressão nas atividades ocupacionais, estando de acordo com a hipótese de que, em situações de perdas e luto, as pessoas experiência um período de retraimento e afastamento das relações sociais e das atividades habituais, indicando que a perda interfere significativamente no cotidiano das suas ocupações, incluindo falta de prazer em desempenhar o trabalho, em ter cuidados pessoais e nas atividades da vida diária (AVD' S), sugerindo a ocorrência do luto ocupacional pela perda das atividade desempenhadas com e para o ente querido falecido. Neste sentido, pode ser observada alteração nas funções ocupacionais em que padrões habituais de atividades são rompidos, remetendo a difícil tarefa de renunciar, excluir e incluir novos papéis. Por outro lado, a estratégia proposta a coleta dos dados revelou-se como um recurso favorável à compreensão e expressão do enlutado, estimulando a aceitação da perda, a avaliação do vinculo co falecido (a) e a elaboração do luto. O uso do recurso material foi favorável a expressão dos pensamentos, sentimentos e necessidades, bem como de competência, habilidades, funções ocupacionais e outros aspectos da existência, ressaltando a importância da compreensão biopsicossocial e ocupacional da pessoa em situação de luto, em que se destaca a assistência Terapêutica Ocupacional agregando esforços na prevenção e promoção a saúde.

30° inclination in handles of plastic boxes can reduce postural and muscular workload during handling

CONTEXTUALIZAÇÃO:O manuseio de materiais está ainda presente nos setores industriais e é associado a lesões na coluna lombar e membros superiores. A inserção de alças em caixas industriais é uma forma de reduzir os riscos relacionados à tarefa, porém a posição e a angulação das alças, que são fatores importantes para o conforto e segurança durante o manuseio, são ainda pouco investigadas objetivamente.OBJETIVOS:Comparar o manuseio de uma caixa comercial e de protótipos com alças e avaliar seus efeitos na postura de membros superiores, atividade elétrica muscular e percepção de agradabilidade em diferentes empunhaduras durante manuseio entre diferentes alturas.MÉTODO:Trinta e sete voluntários saudáveis avaliaram as alças dos protótipos que possibilitavam mudança nas posições (superior e inferior) e angulações (0°, 15° e 30º). Os movimentos dos punhos, cotovelos e ombros foram avaliados por meio da eletrogoniometria e inclinometria. A atividade elétrica muscular dos extensores do punho, bíceps braquial e porção superior do trapézio foi avaliada por um eletromiógrafo portátil. Os registros de movimento e atividade elétrica muscular foram sincronizados. Aspectos subjetivos de agradabilidade foram avaliados por meio de uma escala visual analógica.RESULTADOS E CONCLUSÕES:Os protótipos com alças inclinadas em 30° apresentaram as melhores avaliações de agradabilidade, posturas mais neutras de punho, menores níveis de atividade eletromiográfica do trapézio superior e menores ângulos de elevação dos braços. Os diferentes métodos de medida se mostraram complementares para a avaliação dos membros superiores durante as tarefas de manuseio.