Decision support systems for eco-friendly electronic products

This paper discusses an optimisation based decision support system and methodology for electronic packaging and product design and development which is capable of addressing in efficient manner specified environmental, reliability and cost requirements. A study which focuses on the design of a flip-chip package is presented. Different alternatives for the design of the flip-chip package are considered based on existing options for the applied underfill and volume of solder material used to form the interconnects. Variations in these design input parameters have simultaneous effect on package aspects such as cost, environmental impact and reliability. A decision system for the design of the flip-chip that uses numerical optimisation approach is used to identify the package optimal specification which satisfies the imposed requirements. The reliability aspect of interest is the fatigue of solder joints under thermal cycling. Transient nonlinear finite element analysis (FEA) is used to simulate the thermal fatigue damage in solder joints subject to thermal cycling. Simulation results are manipulated within design of experiments and response surface modelling framework to provide numerical model for reliability which can be used to quantify the package reliability. Assessment of the environmental impact of the package materials is performed by using so called Toxic Index (TI). In this paper we demonstrate the evaluation of the environmental impact only for underfill and lead-free solder materials. This evaluation is based on the amount of material per flip-chip package. Cost is the dominant factor in contemporary flip-chip packaging industry. In the optimisation based decision support system for the design of the flip-chip package, cost of materials which varies as a result of variations in the design parameters is considered.

Posting Incognito ... Males with Eating Problems: Online Emotional Expression and Support

Qualitative research in the area of eating disorders (eds) has predominantly focused on females,whilst the experiences of males’ remains poorly understood. due to the secretive nature of eating problems/eds it can be difficult to explore the experiences of males with these problems; however, online support groups/message boards, which are common and popular, provide a non-invasive
forum for researchers to conduct research. This study analyzed naturally occurring discussions on an internet message board dedicated to males and eating problems using content analysis. Two major overarching themes of emotional expression (sharing feelings of disturbed eating attitudes and emotions; being secretive) and support (informational and emotional) were identified. The message board provided a vital support system for this group, suggesting that online message boards may be an important avenue for health professionals to provide information, support, and advice.

Between Order and Modernity: Resurgence Planning in Revolutionary Egypt

Egypt’s Revolution of 1952 presented a major historical change to its political and economic structure, its society, and its institutions. This paper examines how Nasser’s regime operated through the state apparatus to exhibit features of modernity. Under the pretext of modernization, renovating Cairo’s authentic urban fabric was one of the channels that displayed the new ambitions to unveil a centralized system of governance and ideologies of socialism. The paper particularly looks at the city’s resurgence attempts, promoted by upgrading practices that displayed Western ideals of planning. Eventually, the contradictory planning legislative system introduced by the government raised early alarms at the problems encountered in the planning institution that was not only unable to liberate Cairo’s urban districts from its long-rooted decay, but also struggled to implement the regime’s flagship policy of social justice in a context wherein it was much needed.

Attitudes and Ethics: Evaluating Knowledge and Regulatory Constructs in Planning Enforcement Practice

The departure point for the paper is the need to scrutinise previously unconsidered dimensions which are fundamental to understanding the dynamics of the planning enforcement system. Drawing upon emerging themes in regulation theory the paper fuses these with knowledge constructs. The rationale is that regulatory regimes must be informed by knowledge imparted from a range of sources and the resultant quality of decision making is inextricably linked to the robustness and completeness of the evidence base collated.
The theoretical analysis, coupled with proposed radical legislative changes, provides a lens for an empirical investigation which scrutinises tactics, strategies, operational mechanisms, attitudinal dimensions and ethics with a view to identifying key factors impacting upon enforcement efficacy. Prizes and pitfalls are identified in the course of the analysis and evaluation, with evidence-based remedies suggested where appropriate. The paper concludes by reflecting on the importance of theoretical synergy, epistemological advancement, taking cognisance of ethical and attitudinal challenges facing the planning profession; and, stresses the importance of identifying and bringing to book those who flagrantly breach the Code of Professional Conduct.

Developing mathematics support for first-year engineering students with non-traditional mathematics backgrounds

A maths support system for first-year engineering students with non-traditional entry qualifications has involved students working through practice questions structured to correspond with the maths module which runs in parallel. The setting was informal and there was significant one-to-one assistance. The non-traditional students (who are known to be less well prepared mathematically) were explicitly contacted in the first week of their university studies regarding the maths support and they generally seemed keen to participate. However, attendance at support classes was relatively low, on average, but varied greatly between students. Students appreciated the personal help and having time to ask questions. It seemed that having a small group of friends within the class promoted attendance – perhaps the mutual support or comfort that they all had similar mathematical difficulties was a factor. The classes helped develop confidence. Attendance was hindered by the class being timetabled too soon after the relevant lecture and students were reluctant to come with no work done beforehand. Although students at risk due to their mathematical unpreparedness can easily be identified at an early stage of their university career, encouraging them to partake of the maths support is an ongoing, major problem.

An Adaptive Machine Learning Decision System for Flexible Predictive Maintenance

Process monitoring and Predictive Maintenance (PdM) are gaining increasing attention in most manufacturing environments as a means of reducing maintenance related costs and downtime. This is especially true in industries that are data intensive such as semiconductor manufacturing. In this paper an adaptive PdM based flexible maintenance scheduling decision support system, which pays particular attention to associated opportunity and risk costs, is presented. The proposed system, which employs Machine Learning and regularized regression methods, exploits new information as it becomes available from newly processed components to refine remaining useful life estimates and associated costs and risks. The system has been validated on a real industrial dataset related to an Ion Beam Etching process for semiconductor manufacturing.

Utilização do método Multicritério AHP, na aquisição de um sistema ERP

The selection of an Enterprise Resource Planning (ERP) system is one of the most sensitive and highest impact processes in the area of information systems and technologies, because it supports and integrates the whole business of an organization. Hence the importance of deciding the best solution in order to contribute to the organization's competitiveness in a global and increasingly demanding market. Therefore, it is essential to provide tools to support decision making, turning complex and often intangible decisions into simple and quantifiable scenarios. This study addressed the adoption of the Analytical Hierarchy Process (AHP) multicriteria decision method to support the selection of an ERP system. The literature review was the source used to obtain the set of the most relevant criteria to be considered in this decision, which were subsequently validated through systematic application of various surveys of experts and people related to the field of ERP systems. To support the application of AHP, according to the model obtained in the study, it was developed a web application that will be available to the general public. The responsible for the acquisition of ERP systems can use it to easily apply the AHP method based on validated decision model. On the other hand, the web application can be used as a validation tool, allowing collecting data for future developments of the decision model.

Using data mining techniques to support DR programs definition in smart grids

In recent years, Power Systems (PS) have experimented many changes in their operation. The introduction of new players managing Distributed Generation (DG) units, and the existence of new Demand Response (DR) programs make the control of the system a more complex problem and allow a more flexible management. An intelligent resource management in the context of smart grids is of huge important so that smart grids functions are assured. This paper proposes a new methodology to support system operators and/or Virtual Power Players (VPPs) to determine effective and efficient DR programs that can be put into practice. This method is based on the use of data mining techniques applied to a database which is obtained for a large set of operation scenarios. The paper includes a case study based on 27,000 scenarios considering a diversity of distributed resources in a 32 bus distribution network.

Development of Safety and Quality Management System in Shrimp Farming

Shrimp Aquaculture has provided tremendous opportunity for the economic and social upliftment of rural communities in the coastal areas of our country Over a hundred thousand farmers, of whom about 90% belong to the small and marginal category, are engaged in shrimp farming. Penaeus monodon is the most predominant cultured species in India which is mainly exported to highly sophisticated, quality and safety conscious world markets. Food safety has been of concem to humankind since the dawn of history and the concern about food safety resulted in the evolution of a cost effective, food safety assurance method, the Hazard Analysis Critical Control Point (HACCP). Considering the major contribution of cultured Penaeus monodon to the total shrimp production and the economic losses encountered due to disease outbreak and also because traditional methods of quality control and end point inspection cannot guarantee the safety of our cultured seafood products, it is essential that science based preventive approaches like HACCP and Pre requisite Programmes (PRP) be implemented in our shrimp farming operations. PRP is considered as a support system which provides a solid foundation for HACCP. The safety of postlarvae (PL) supplied for brackish water shrimp farming has also become an issue of concern over the past few years. The quality and safety of hatchery produced seeds have been deteriorating and disease outbreaks have become very common in hatcheries. It is in this context that the necessity for following strict quarantine measures with standards and code of practices becomes significant. Though there were a lot of hue and cry on the need for extending the focus of seafood safety assurance from processing and exporting to the pre-harvest and hatchery rearing phases, an experimental move in this direction has been rare or nil. An integrated management system only can assure the effective control of the quality, hygiene and safety related issues. This study therefore aims at designing a safety and quality management system model for implementation in shrimp farming and hatchery operations by linking the concepts of HACCP and PRP.

Methodische Grundlagen zur Bewahrung und Wiederherstellung großräumig funktionsfähiger ökologischer Beziehungen in der räumlichen Umweltplanung

Mit der Verwirklichung ,Ökologischer Netzwerke‘ werden Hoffnungen zum Stopp des Verlustes der biologischen Vielfalt verknüpft. Sowohl auf gesamteuropäischer Ebene (Pan-European Ecological Network - PEEN) als auch in den einzelnen Staaten entstehen Pläne zum Aufbau von Verbundsystemen. Im föderalen Deutschland werden kleinmaßstäbliche Biotopverbundplanungen auf Landesebene aufgestellt; zum nationalen Biotopverbund bestehen erste Konzepte. Die vorliegende Arbeit ist auf diese überörtlichen, strategisch vorbereitenden Planungsebenen ausgerichtet. Ziele des Verbunds sind der Erhalt von Populationen insbesondere der gefährdeten Arten sowie die Ermöglichung von Ausbreitung und Wanderung. Aufgrund fehlender Datengrundlagen zu den Arten und Populationen ist es nicht ohne weiteres möglich, die Konzepte und Modelle der Populationsökologie in die überörtlichen Planungsebenen zu übertragen. Gemäß der o.g. Zielstellungen sollte sich aber die Planung von Verbundsystemen an den Ansprüchen der auf Verbund angewiesenen Arten orientieren. Ziel der Arbeit war die Entwicklung einer praktikablen GIS-gestützten Planungshilfe zur größtmöglichen Integration ökologischen Wissens unter der Bedingung eingeschränkter Informationsverfügbarkeit. Als Grundlagen dazu werden in Übersichtsform zunächst die globalen, europäisch-internationalen und nationalen Rahmenbedingungen und Anforderungen bezüglich des Aufbaus von Verbundsystemen zusammengestellt. Hier sind die Strategien zum PEEN hervorzuheben, die eine Integration ökologischer Inhalte insbesondere durch die Berücksichtigung räumlich-funktionaler Beziehungen fordern. Eine umfassende Analyse der landesweiten Biotopverbundplanungen der BRD zeigte die teilweise erheblichen Unterschiede zwischen den Länderplanungen auf, die es aktuell nicht ermöglichen, ein schlüssiges nationales Konzept zusammenzufügen. Nicht alle Länder haben landesweite Biotopverbundplanungen und Landeskonzepte, bei denen dem geplanten Verbund die Ansprüche von Arten zugrunde gelegt werden, gibt es nur ansatzweise. Weiterhin wurde eine zielgerichtete Eignungsprüfung bestehender GIS-basierter Modelle und Konzepte zum Verbund unter Berücksichtigung der regelmäßig in Deutschland verfügbaren Datengrundlagen durchgeführt. Da keine integrativen regelorientierten Ansätze vorhanden waren, wurde der vektorbasierte Algorithmus HABITAT-NET entwickelt. Er arbeitet mit ,Anspruchstypen‘ hinsichtlich des Habitatverbunds, die stellvertretend für unterschiedliche ökologische Gruppen von (Ziel-) Arten mit terrestrischer Ausbreitung stehen. Kombiniert wird die Fähigkeit zur Ausbreitung mit einer Grobtypisierung der Biotopbindung. Die wichtigsten Grundlagendaten bilden die jeweiligen (potenziellen) Habitate von Arten eines Anspruchstyps sowie die umgebende Landnutzung. Bei der Bildung von ,Lebensraumnetzwerken‘ (Teil I) werden gestufte ,Funktions- und Verbindungsräume‘ generiert, die zu einem räumlichen System verknüpft sind. Anschließend kann die aktuelle Zerschneidung der Netzwerke durch Verkehrstrassen aufgezeigt werden, um darauf aufbauend prioritäre Abschnitte zur Wiedervernetzung zu ermitteln (Teil II). Begleitend wird das Konzept der unzerschnittenen Funktionsräume (UFR) entworfen, mit dem die Indikation von Habitatzerschneidung auf Landschaftsebene möglich ist. Diskutiert werden schließlich die Eignung der Ergebnisse als kleinmaßstäblicher Zielrahmen, Tests zur Validierung, Vergleiche mit Verbundplanungen und verschiedene Setzungen im GIS-Algorithmus. Erläuterungen zu den Einsatzmöglichkeiten erfolgen beispielsweise für die Bereiche Biotopverbund- und Landschaftsplanung, Raumordnung, Strategische Umweltprüfung, Verkehrswegeplanung, Unterstützung des Konzeptes der Lebensraumkorridore, Kohärenz im Schutzgebietssystem NATURA 2000 und Aufbau von Umweltinformationssystemen. Schließlich wird ein Rück- und Ausblick mit der Formulierung des weiteren Forschungsbedarfs verknüpft.

Development, implementation and evaluation of an activated sludge supervisory system for the Granollers WWTP

La present tesi pretén recollir l'experiència viscuda en desenvolupar un sistema supervisor intel·ligent per a la millora de la gestió de plantes depuradores d'aigües residuals., implementar-lo en planta real (EDAR Granollers) i avaluar-ne el funcionament dia a dia amb situacions típiques de la planta. Aquest sistema supervisor combina i integra eines de control clàssic de les plantes depuradores (controlador automàtic del nivell d'oxigen dissolt al reactor biològic, ús de models descriptius del procés...) amb l'aplicació d'eines del camp de la intel·ligència artificial (sistemes basats en el coneixement, concretament sistemes experts i sistemes basats en casos, i xarxes neuronals). Aquest document s'estructura en 9 capítols diferents. Hi ha una primera part introductòria on es fa una revisió de l'estat actual del control de les EDARs i s'explica el perquè de la complexitat de la gestió d'aquests processos (capítol 1). Aquest capítol introductori juntament amb el capítol 2, on es pretén explicar els antecedents d'aquesta tesi, serveixen per establir els objectius d'aquest treball (capítol 3). A continuació, el capítol 4 descriu les peculiaritats i especificitats de la planta que s'ha escollit per implementar el sistema supervisor. Els capítols 5 i 6 del present document exposen el treball fet per a desenvolupar el sistema basat en regles o sistema expert (capítol 6) i el sistema basat en casos (capítol 7). El capítol 8 descriu la integració d'aquestes dues eines de raonament en una arquitectura multi nivell distribuïda. Finalment, hi ha una darrer capítol que correspon a la avaluació (verificació i validació), en primer lloc, de cadascuna de les eines per separat i, posteriorment, del sistema global en front de situacions reals que es donin a la depuradora

A Conceptual Model for Group Support Systems in Local Councils

This paper proposes a conceptual model of a context-aware group support system (GSS) to assist local council employees to perform collaborative tasks in conjunction with inter- and intra-organisational stakeholders. Most discussions about e-government focus on the use of ICT to improve the relationship between government and citizen, not on the relationship between government and employees. This paper seeks to expose the unique culture of UK local councils and to show how a GSS could support local government employer and employee needs.

A conceptual model for group support systems in local councils

This paper proposes a conceptual model of a context-aware group support system (GSS) to assist local council employees to perform collaborative tasks in conjunction with inter- and intra-organisational stakeholders. Most discussions about e-government focus on the use of ICT to improve the relationship between government and citizen, not on the relationship between government and employees. This paper seeks to expose the unique culture of UK local councils and to show how a GSS could support local government employer and employee needs.

Intelligent agents and distributed models for cooperative task support

Purpose – To describe some research done, as part of an EPSRC funded project, to assist engineers working together on collaborative tasks. Design/methodology/approach – Distributed finite state modelling and agent techniques are used successfully in a new hybrid self-organising decision making system applied to collaborative work support. For the particular application, analysis of the tasks involved has been performed and these tasks are modelled. The system then employs a novel generic agent model, where task and domain knowledge are isolated from the support system, which provides relevant information to the engineers. Findings – The method is applied in the despatch of transmission commands within the control room of The National Grid Company Plc (NGC) – tasks are completed significantly faster when the system is utilised. Research limitations/implications – The paper describes a generic approach and it would be interesting to investigate how well it works in other applications. Practical implications – Although only one application has been studied, the methodology could equally be applied to a general class of cooperative work environments. Originality/value – One key part of the work is the novel generic agent model that enables the task and domain knowledge, which are application specific, to be isolated from the support system, and hence allows the method to be applied in other domains.

An agent based approach to distributed task modeling for co-operative task support

This paper describes the design and implementation of an agent based network for the support of collaborative switching tasks within the control room environment of the National Grid Company plc. This work includes aspects from several research disciplines, including operational analysis, human computer interaction, finite state modelling techniques, intelligent agents and computer supported co-operative work. Aspects of these procedures have been used in the analysis of collaborative tasks to produce distributed local models for all involved users. These models have been used as the basis for the production of local finite state automata. These automata have then been embedded within an agent network together with behavioural information extracted from the task and user analysis phase. The resulting support system is capable of task and communication management within the transmission despatch environment.