Textural, viscoelastic and mucoadhesive properties of pharmaceutical gels composed of cellulose polymers

This study examined the mechanical/textural, viscoeiastic and mucoadhesive properties of a range of aqueous gels composed of either hydroxyethylcellulose (HEC) or sodium carboxymethylcellulose (Na CMC). The mechanical/textural properties of each formulation were determined using texture profile analysis. The viscoelastic properties of each formulation were examined over a defined frequency range (0.01-1.0 Hz) using oscillatory rheometry in conjunction with stainless steel parallel plate geometry. The mucoadhesive properties of the gels were evaluated by measuring the tensile force required to overcome the gel/mucin adhesive interaction. Both gel hardness and compressibility, properties that affect the ease of product removal from a container and spreadability, increased as a function of increasing polymer concentrations. This is attributed to the effects of HEC and Na CMC on gel viscosity. Gel adhesiveness, a property related to bioadhesion, also increased as a function of polymer concentration and is attributed to the reported adhesive nature of these polymers. Increasing frequency of oscillation increased the storage and loss moduli yet decreased bath the dynamic viscosity of each gel type and also the loss tangent of HEC (but not Na CMC) gels. Therefore, following exposure to the range of oscillatory stresses that may be expected in vivo, HEC gels will be more susceptible than Na CMC gels to alterations in these rheological properties. Consequently, it would be expected that the clinical performance of HEC gels will be modified to a greater extent than Na CMC gels. In general, HEC gels exhibited a greater elastic nature than Na CMC gels over the frequency range employed for oscillation The storage and loss moduli and dynamic viscosity of both gel types increased, yet the loss tangent of both gel types decreased as a function of increasing polymer concentration. Gel mucoadhesive strength was dependent on both the time of contact of the formulation with mucin and also on polymer concentration. In conclusion, this study has characterised a number of gels containing either HEC or Na CMC in terms of their mechanical/textural, viscoelastic and mucoadhesive properties. Due to its relevance to the clinical performance, it is suggested that the information derived from these methods may be usefully combined to provide a more rational basis for the selection of polymers and their formulation as topical drug delivery systems. (C) 1997 Elsevier Science B.V.

Attention Engagement in Early Infancy

We report a longitudinal study investigating developmental changes in the structure of attention engagement during early infancy. Forty-three infants were observed monthly from 2 to 4 months. Attention engagement was assessed from play interactions with parents, using a coding system developed by Bakeman and Adamson (1984). The results indicated a developmental transition in attention engagement at 3 months: after this age infants engaged for longer periods and in a wider variety of states. Most infants displayed person engagement at 2 months, passive joint engagement at 3 months, and object engagement at 4 months. To address whether emerging abilities of attention engagement allow infants to follow the attention of social partners, we compared attention engagement to performance on an experimental measure of attention control (reported by Perra & Gattis, 2010). Analyses revealed a positive relation between passive joint engagement and checking back, suggesting that changes in passive joint engagement reflect the development in attention control.

Spontaneous Attention to Faces in Asperger Sndrome using Ecologically Valid Static Stimuli

Previous eye tracking research on the allocation of attention to social information by individuals with autism spectrum disorders is equivocal and may be in part a consequence of variation in stimuli used between studies. The current study explored attention allocation to faces, and within faces,
by individuals with Asperger syndrome using a range of static stimuli where faces were either viewed in isolation or viewed in the context of a social scene. Results showed that faces were viewed typically by the individuals with Asperger syndrome when presented in isolation, but attention to the eyes was significantly diminished in comparison to age and IQ-matched typical viewers when faces were viewed as part of social scenes. We show that when using static stimuli, there is evidence of atypicality for individuals with Asperger syndrome depending on the extent of social context. Our findings shed light on the previous explanations of gaze behaviour that have emphasised the role of movement in atypicalities of social attention in autism spectrum disorders and highlight the importance of consideration of the realistic portrayal of social information for future studies.

Real-life Social Attention in Children with Autism Spectrum Disorders

Autism is a neuro-developmental disorder defined by atypical social behaviour, of which atypical social attention behaviours are among the earliest clinical markers (Volkmar et al., 1997). Eye tracking studies using still images and movie clips have provided a method for the precise quantification of atypical social attention in ASD. This is generally characterised by diminished viewing of the most socially pertinent regions (eyes), and increased viewing of less socially informative regions (body, background, objects) (Klin et al., 2002; Riby & Hancock, 2008, 2009). Ecological validity within eye tracking studies has become an increasingly important issue. As of yet, however, little is known about the precise nature of the atypicalities of social attention in ASD in real-life. Objectives: To capture and quantify gaze patterns for children with an ASD within a real life setting, compared to two Typically Developing (TD) comparison groups. Methods: Nine children with an ASD were compared to two age matched TD groups – a verbal (N=9) and a non-verbal (N=9) comparison group. A real-life scenario was created involving an experimenter posing as a magician, and consisted of 3 segments: a conversation segment; a magic trick segment; and a puppet segment. The first segment explored children’s attentional preferences during a real-life conversation; the magic trick segment explored children’s use of the eyes as a communicative cue, and the puppet segment explored attention capture. Finally, part of the puppet section explored children’s use of facial information in response to an unexpected event. Results: The most striking difference between the groups was the diminished viewing of the eyes by the ASD group in comparison to both control groups. This was found particularly during the conversation segment, but also during the magic trick segment, and during the puppet segment. When in conversation, participants with ASD were found to spend a greater proportion time looking off-screen, in comparison to TD participants. There was also a tendency for the ASD group to spend a greater proportion of time looking to the mouth of the experimenter. During the magic trick segment, despite the fact that the eyes were not predictive of a correct location, both TD comparison groups continued to use the eyes as a communicative cue, whereas the ASD group did not. In the puppet segment, all three groups spent a similar amount of time looking between the puppet and regions of the experimenter’s face. However, in response to an unexpected event, the ASD group were significantly slower to fixate back on the experimenter’s face. Conclusions: The results demonstrate the reduced salience of socially pertinent information for children with ASD in real life, and they provide support for the findings from previous eye tracking studies involving scene viewing. However, the results also highlight a pattern looking off-screen for both the TD and ASD groups. This eye movement behaviour is likely to be associated specifically with real-life interaction, as it has functional relevance (Doherty-Sneddon et al., 2002). However, the fact that it is significantly increased in the ASD group has implications for their understanding of real life social interactions.

Pharmaceutical applications of dynamic mechanical thermal analysis

The successful development of polymeric drug delivery and biomedical devices requires a comprehensive understanding of the viscoleastic properties of polymers as these have been shown to directly affect clinical efficacy. Dynamic mechanical thermal analysis (DMTA) is an accessible and versatile analytical technique in which an oscillating stress or strain is applied to a sample as a function of oscillatory frequency and temperature. Through cyclic application of a non-destructive stress or strain, a comprehensive understanding of the viscoelastic properties of polymers may be obtained. In this review, we provide a concise overview of the theory of DMTA and the basic instrumental/operating principles. Moreover, the application of DMTA for the characterization of solid pharmaceutical and biomedical systems has been discussed in detail. In particular we have described the potential of DMTA to measure and understand relaxation transitions and miscibility in binary and higher-order systems and describe the more recent applications of the technique for this purpose. © 2011 Elsevier B.V.

Hot-melt extrusion technology and pharmaceutical application

The use of hot-melt extrusion (HME) within the pharmaceutical industry is steadily increasing, due to its proven ability to efficiently manufacture novel products. The process has been utilized readily in the plastics industry for over a century and has been used to manufacture medical devices for several decades. The development of novel drugs with poor solubility and bioavailability brought the application of HME into the realm of drug-delivery systems. This has specifically been shown in the development of drug-delivery systems of both solid dosage forms and transdermal patches. HME involves the application of heat, pressure and agitation through an extrusion channel to mix materials together, and subsequently forcing them out through a die. Twin-screw extruders are most popular in solid dosage form development as it imparts both dispersive and distributive mixing. It blends materials while also imparting high shear to break-up particles and disperse them. HME extrusion has been shown to molecularly disperse poorly soluble drugs in a polymer carrier, increasing dissolution rates and bioavailability. The most common difficulty encountered in producing such dispersions is stabilization of amorphous drugs, which prevents them from recrystallization during storage. Pharmaceutical industrial suppliers, of both materials and equipment, have increased their development of equipment and chemicals for specific use with HME. Clearly, HME has been identified as an important and significant process to further enhance drug solubility and solid-dispersion production. © 2012 Future Science Ltd.

Focused attention, heart rate deceleration, and cognitive development in preterm and full-term infants

The majority of children who are born very preterm escape major impairment, yet more subtle cognitive and attention problems are very common in this population. Previous research has linked infant focused attention during exploratory play to later cognition in children born full-term and preterm. Infant focused attention can be indexed by sustained decreases in heart rate (HR). However there are no preterm studies that have jointly examined infant behavioral attention and concurrent HR response during exploratory play in relation to developing cognition. We recruited preterm infants free from neonatal conditions associated with major adverse outcomes, and further excluded infants with developmental delay (Bayley Mental Development Index [MDI?