Knubbved istället för vanlig ved? : slutrapport från projekt Styckeved för småskalig eldning

Chunkwood is a wood fuel with a fuel particle length between 50 and 150 mm, i.e. with a sizebetween wood chips and conventional firewood. Chunkwood can be produced and handled asrational as wood chips and can dry during storage like conventional firewood. This is known sincelong. In project Smallwood for small scale heating we have investigated if chunkwood can be usedin a small scale as a fuel for heating detached houses in conventional firewood boilers as well asautomatically fed to a boiler in a similar way as wood chips. We have also compared completesystems for small scale production, distribution and heating with chunkwood, wood chips andconventional firewood.Storage of chunkwood produced for testing small scale boilers confirmed that chunkwood can dryduring storage at least as good as conventional firewood. Tests in different boilers for detachedhomes showed that chunkwood can be used in conventional firewood boilers as well as in automaticallyfed wood chips boilers. Chunkwood can be delivered to the customer to the same or lowercost as wood chips and firewood, but need much less handling by the customer than conventionalfirewood. However, if chunkwood is used in a conventional firewood boiler, it needs some handlingby shovel and wheelbarrow. Technical development of handling from the storage to the boiler isneeded. In a somewhat larger scale, e.g. a boiler for apartment blocks or a small district heatingsystem, chunkwood should be very interesting as a replacement of fuel pellets or fuel briquettes. Itwould be interesting with some projects, which in this scale demonstrates the whole system fromthe forest to heat.

Slutrapport för EU-projekt SolNET P22416-1

SolNET var den första europeiska forskarskolan för termisk solvenergi med 10 doktorander, där sju gemensamma doktorandkurser utvecklades och genomfördes under projektets gång. Projektet stöddes av EU-programmet Marie-Curie från juni 2006 till maj 2010.Centrum för solenergiforskning SERC vid Högskolan Dalarna deltog med en doktorand, Janne Paavilainen. SERC genomförde den första av doktorandkurserna, om dynamisk systemsimulering. 30 studenter deltog från 16 länder varav 22 var doktorander och tre var från industri.Under 2007 genomförde Paavilainen en teknoekonomisk utvärdering av mellanstora pellet- och solvärmesystem för närvärme som presenterades vid konferensen Eurosun 2008. Resultaten visar under vilka förutsättningar som solvärme kan vara ekonomisk lönsamt i närvärmesystem i Sverige och Finland. Paavilainen har varit medförfattare till en tidsskriftsartikel om SERCs simuleringsmodell för pelletspannor och –kaminer samt varit medförfattare till två tidsskriftsartiklar tillsammans med SPF (Schweiz) och TU Graz (Österrike) om en ny pannmodell för gas, olja och pellets. Dessa två validerade modeller i programmet TRNSYS används nu rutinmässigt i Sverige av SP och SERC och i Europa av ett flertal forskargrupper. Den nya pannmodellen som utvecklades med SPF och TU Graz har också införlivats i programmet Polysun som används av flera hundra användare runt hela världen, inkl. SERCs magisterstudenter.

Provningsmetod för integrerade sol-biosystem : Årsverkningsgrad genom korttidsmätning

Test method for integrated solar- biomass systems - Long term prediction trough short term measurementsSP Technical Research Institute of Sweden and SERC, Dalarna University have in cooperation developed a test method for integrated solar and biomass systems. The test method is performed under six days including two summer days, two winter days and two spring/autumn days true to real weather conditions and loads for a single family house. The aim of the test method is to get information about a Combisystem’s annual performance and operation throughout a short term test. Seven different solar Combisystems have been tested within the project together with a pellet boiler without solar collectors. In addition to that a comparative testing has been performed at the two laboratories at SP and at SERC on the same Combisystem. The test method developed within the project has been proved to withstand the aim of the project, which is to be able to compare the performance between the systems. The test method is also suitable for identification of possible operation problems so they can be taken care of and consequently improves the system.The project and the system testing reveal that it is in general favorable to combine biomass pellets with solar heating. Pellet boilers has normally a low performance during the summer period but combined with a solar collector the boiler can be switch off during this period. There are however big differences in performance between the tested. The efficiency of the pellet boiler is highly dependent of the operating conditions and elements like heat losses from the system, system configuration and control strategy have great influence of the performance of the system and the emissions. On the other hand, the performance and the size of the solar collectors have a minor effect on the overall system performance. There is obviously a big potential for improvement of the system´s performance and the developed test method is an essential way to implement this perfection.

Småhusens framtida utformning : Hur påverkar Boverkets nya byggregler?

Från den första januari 2010 gäller nya byggregler för energianvändning och effektbehov i nya byggnader. Det innebär en skärpning för alla byggnader som använder el för uppvärmning. För att begränsa effektbehovet för elvärmda hus införs krav på maximal installerad eleffekt. Det blir krav på lägre mängd köpt energi i hus som klassas som eluppvärmda än i hus som har annat uppvärmningssätt. Denna rapport undersöker hur byggandet kan komma att påverkas av de nya byggreglerna och vilka system som kan komma att bli dominerande i småhusen framöver. En villa med olika isolerstandard simulerades på fyra olika orter från Malmö i söder till Kiruna i norr och energianvändningen för de olika uppvärmningssystemen beräknades sedan schablonmässigt med hjälp av tillverkarnas data. Två olika isolerstandarder och ett passivhus simulerades med respektive utan från och tilluft med värmeåtervinning.   Resultaten visar att traditionella frånluftvärmepumpar inte klarar kraven, både för energi och för effekt, förutom möjligen i sydligaste Sverige i ett välisolerat hus. En kondenserande frånluftvärmepump som kyler frånluften kraftigare och utvinner kondensationsvärme klarar kraven om den uppfyller vad tillverkaren lovar. En frånluft/jordvärmepump klarar också kraven, men ligger nära gränsen i Mellansverige. De uppvärmningsalternativ som klarar de nya energikraven med god marginal i alla klimatzoner är kondenserande frånluftvärmepump, bergvärmepump, fjärrvärme (FTX krävs i norra Sverige), pelletkamin med FTX samt passivhuset. De el-baserade uppvärmningsalternativ som ger lägst elanvändning är bergvärmepump och passivhus. Dessa ligger på alla orter långt under kravgränserna från BBR. Uppvärmning med enbart pellets eller fjärrvärme klarar inte energikraven med tillräcklig marginal, förutom i Malmö. Det krävs kompletterande åtgärder, som kan vara värmeåtervinning med FTX, frånluftvärmepump solvärme eller tilläggsisolering.   Pelletvärmesystemen får lite svårare att klara energikraven, genom att pelletkaminens verkningsgrad ligger innanför systemgränsen. Det blir alltså i praktiken krav på FTX med ved, pellets och även med fjärrvärme i norra Sverige. En ekonomisk utvärdering har genomförts baserad på första årets energi-, kapital- och underhållskostnader. Kapitalkostnader delas upp på komponentens förväntade livslängd med annuitetsmetoden. Framtida underhållskostnader diskonteras ett nuvärde och delas upp med annuitetsmetoden. Dagens energipriser och en kalkylränta på 4,5 % används som utgångspunkt, men varieras för olika scenarier.   Fjärrvärme tycks ge bland de lägsta kostnaderna av de studerade alternativen. I alla fall i de kommuner som ligger under medelpriset för svensk fjärrvärme. Vedeldning har inte studerats här, men ger säkerligen lägst totalkostnader om man accepterar den tid som krävs för att hantera ved och elda. Det studerade passivhuset hör också till de alternativ som har bland de lägsta kostnaderna då investering och energianvändning vägs samman. Men räntenivån har en stor inverkan på systemens totalkostnad. Låg ränta har en utjämnande effekt på totalkostnaden. Vid högre ränta ökar kostnaden mest för system med lång livslängd (avskrivningstid), vilket gör passivhusen dyrare. Pelleteldning i nybyggda hus kommer nog att utgöra en mindre del av installationerna, då det krävs FTX och investeringskostnaden blir ganska hög. Om lösningar med frånluftvärmepump och luftburen pelletkamin mot förmodan skulle komma att uppfylla kraven för ett icke elvärmt hus kan det bli ett uppsving för sådana lösningar

Elbesparing med pelletkaminer och solvärme i direktelvärmda småhus

The aim of this study was to investigate how electricallyheated houses can be converted to using wood pellet and solarheating. There are a large number of wood pellet stoves on themarket. Many stoves have a water jacket, which gives anopportunity to distribute the heat to domestic hot water and aradiator heating system. Three typical Swedish houses with electric resistanceheating have been studied. Fourteen different system conceptsusing wood pellet stoves and solar heating systems have beenevaluated. The systems and the houses have been simulated indetail using TRNSYS. The houses have been divided in up to 10different zones and heat transfer by air circulation throughdoorways and open doors have been simulated. The pellet stoveswere simulated using a recently developed TRNSYS component,which models the start- and stop phases, emissions and thedynamic behaviour of the stoves. The model also calculates theCO-emissions. Simulations were made with one stove without awater jacket and two stoves with different fractions of thegenerated heat distributed in the water circuit. Simulations show that the electricity savings using a pelletstove are greatly affected by the house plan, the systemchoice, if the internal doors are open or closed and thedesired level of comfort. Installing a stove with awater-jacket connected to a radiator system and a hot waterstorage has the advantage that heat can be transferred todomestic hot water and be distributed to other rooms. Suchsystems lead to greater electricity savings, especially inhouses having a traditional layout. It was found that not allrooms needed radiators and that it was more effective in mostcases t use a stove with a higher fraction of the heatdistributed by the water circuit. The economic investigation shows that installing a woodpellet stove without a water jacket gives the lowest totalenergy- and capital costs in the house with an open plan (fortoday's energy prices and the simulated comfort criteria). Inthe houses with a traditional layout a pellet stove givesslightly higher costs than the reference house having onlyelectrical resistance heating due to the fact that less heatingcan be replaced. The concepts including stoves with a waterjacket all give higher costs than the reference system, but theconcept closest to be economical is a system with a bufferstore, a stove with a high fraction of the heat distributed bythe water circuit, a new water radiator heating system and asolar collector. Losses from stoves can be divided into: flue gas lossesincluding leakage air flow when the stove is not in operation;losses during start and stop phases; and losses due to a highair factor. An increased efficiency of the stoves is importantboth from a private economical point of view, but also from theperspective that there can be a lack of bio fuel in the nearfuture also in Sweden. From this point of view it is alsoimportant to utilize as much solar heat as possible. Theutilization of solar heat is low in the simulated systems,depending on the lack of space for a large buffer store. The simulations have shown that the annual efficiency ismuch lower that the nominal efficiency at full power. Thesimulations have also shown that changing the control principlefor the stove can improve efficiency and reduce theCO-emissions. Today's most common control principle for stovesis the on/off control, which results in many starts and stopsand thereby high CO-emissions. A more advanced control varyingthe heating rate from maximum to minimum to keep a constantroom temperature reduces the number of starts and stops andthereby the emissions. Also the efficiency can be higher withsuch a control, and the room temperature will be kept at a moreconstant temperature providing a higher comfort.

Emissions Characterisation of residential pellet boilers during start-up and stop periods

In this study, gaseous emissions and particles are measured during start-up and stop periods for an over-fed boiler and an under-fed boiler. Both gaseous and particulate matter emissions are continuously measured in the laboratory. The measurement of gaseous emissions includes oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), nitrogen oxide and (NO). The emissions rates are calculated from measured emissions concentrations and flue gas flow. The behaviours of the boilers during start-up and stop periods are analysed and the emissions are characterised in terms of CO, NO, TOC and particles (PM2.5 mass and number). The duration of the characterised periods vary between two boilers due to the difference in type of ignition and combustion control. The under-fed boiler B produces higher emissions during start-up periods than the over-fed boiler A. More hydrocarbon and particles are emitted by the under-fed boiler during stop periods. Accumulated mass of CO and TOC during start-up and stop periods contribute a major portion of the total mass emitted during whole operation. However, accumulated mass of NO and PM during start-up and stop periods are not significant as the duration of emission peak is relatively short.

A reducao de pelotas de minerio de ferro pela utilizacao de carvoes nao desgaseificados e desgaseificados com diferentes relacoes cfix/fetot

Através de ensaios isotérmicos de redução (950°C) e com velocidade de aquecimento constante, estuda-se o comportamento do sistema carvão-pelota de minério de ferro (CVRD, tipo RD) sob o ponto de vista dos graus de redução e respectivamente graus de metalização obtidos. Os ensaios de redução foram realizados em reatores estáticos, aquecidos eletricamente num forno vertical. Foram utilizados, como redutores sólidos, os carvões de Charqueadas (RS) e de Butiá-Recreio(RS), tanto no estado não desgaseificado, como no estado desgaseificado e com diferentes relações Cfix/Fetot. Foram traçadas curvas dos graus de redução e metalização obtidos contra o tempo, sendo as mesmas analisadas quanto: a influência da natureza do carvão, da presença de matéria volátil e da relação Cfix/Fetot. Também foram determinadas constantes de velocidade da reação global de redução na sistema estudado.

Contribuicao a reducao direta de minerio de ferro com redutor solido : influencia do teor de cinzas do carvao e de um agente gaseificante adicional

Estudou-se nesse trabalho a influência da adição de líquidos (água e álcool etílico) na redução direta de pelotas hematíticas com redutor sólido nas temperaturas de 950, 1000 e 1050°C. Pesquisou-se a influência da adição desses líquidos sobre a velocidade de redução do minério (através do grau de redução) e sobre a variação de volume ocorrida nas pelotas durante a redução (através de variação de diâmetro e observações em microscópio ótico e eletrônico). Paralelamente estudou-se a influência do teor de cinzas do carvão sobre sua reatividade, através de testes de redução de pelotas com carvões desgaseificados e não desgaseificados e também testes de gaseificação dos carvões, todos a 950°C. Os ensaios foram realizados em reatores aquecidos por forno elétrico. Empregaram-se carvões da mina Butiá Recreio (RS) de 35% de cinzas (desgaseificados) nos testes com adição de líquidos e carvões da mina de Leão (RS) lavados, com diversos teores de cinzas e não lavados (R.O.M.). Concluiu-se que a adição de líquidos aumenta a redução das pelotas e proporciona diminuição do inchamento. Verificou-se que utilizando-se carvões previamente desgaseificados não houve considerável influência do teor de cinzas sobre a reatividade, entretanto com carvão não desgaseificados esta influência tornou-se significativa.

Sinterização de Ce1-XEuXO2-(X/2) para aplicação como eletrólito sólido em células a combustível de temperaturas intermediárias

Given the environmental concern over global warming that occurs mainly by emission of CO2 from the combustion of petroleum, coal and natural gas research focused on alternative and clean energy generation has been intensified. Among these, the highlight the solid oxide fuel cell intermediate temperature (IT-SOFC). For application as electrolyte of the devices doped based CeO2 with rare earth ions (TR+ 3) have been quite promising because they have good ionic conductivity and operate at relatively low temperatures (500-800 ° C). In this work, studied the Ce1-xEuxO2-δ (x = 0,1, 0,2 and 0,3), solid solutions synthesized by the polymeric precursor method to be used as solid electrolyte. It was also studied the processing steps of these powders (milling, compaction and two step sintering) in order to obtain dense sintered pellets with reduced grain size and homogeneous microstructure. For this, the powders were characterized by thermal analysis, X-ray diffraction, particle size distribution and scanning electrons microscopy, since the sintered samples were characterized by dilatometry, scanning electrons microscopy, density and grain size measurements. By x-ray diffraction, it was verified the formation of the solid solution for all compositions. Crystallites in the nanometric scale were found for both sintering routes but the two step sintering presented significant reduction in the average grain size

Adsorção de Pb(II) utilizando adsorvente composto por montmorilonita e dolomita

The destructive impact of improper disposal of heavy metals in the environment increases as a direct result of population explosion, urbanization and industrial expansion and technological developments. Argil are potential materials for adsorption of inorganic and the pelletization of it is required for use in adsorptive columns of fixed bed. The low cost and the possibility of regeneration makes these materials attractive for use in the purification process, capable of removing inorganic compounds in contaminated aquatic environments. In this work was made pellets of a mixture of dolomite and montmorillonite by wet agglomeration, in different percentages. The removal of Pb (II) was investigated through experimental studies, and was modeled by kinetic models and isotherms of adsorption. The materials were characterized using the techniques of XRD, TG / DTA, FT-IR, and surface area by BET method. The results showed the adsorption efficiency of the contaminant by the composite material studied in synthetic solution. The study found that the adsorption follows the Langmuir model, and the kinetics of adsorption follows the model of pseudosecond order

Compósitos de matriz metálica à base níquel com adição de TaC e NbC produzidos via metalurgia do pó

Carbide reinforced metallic alloys potentially improve some important mechanical properties required for the overall use of important engineering materials such as steel and nickel. Nevertheless, improved performance is achieved not only by composition enhancement but also by adequate processing techniques, such as novel sintering methods in the case of powder metallurgy. The method minimizes energy losses in addition to providing uniform heating during sintering. Thus, the general objective of this study was to evaluate the density, hardness, flexural strength, dilatometric behavior and to analyze the microstructure of metal matrix composites based nickel with addition of carbides of tantalum and / or niobium when sintered in a conventional furnace and Plasma assisted debinding and sintering (PADS). Initially, were defineds best parameters of granulation, screening and mixing procedure. After, mixtures of carbonyl Ni and 5%, 10% and 15 wt.% NbC and TaC were prepared in a Y-type mixer under wet conditions during 60 minutes. The mixtures were then dried and granulated using 1.5 wt. % paraffin diluted in hexane. Granulates were cold pressed under 600 MPa. Paraffin was then removed from the pressed pellets during a pre-sintering process carried out in a tubular furnace at 500 °C during 30 min. The heating rate was 3 ºC/min. The pellets were then sintered using either a plasma assisted reactor or a conventional resistive tubular furnace. For both methods, the heating rate was set to 8 ºC/min up to 1150 °C. The holding time was 60 minutes. The microstructure of the sintered samples was evaluated by SEM. Brinell hardness tests were also carried out. The results revealed that higher density and higher hardness values were observed in the plasma-assisted sintered samples. Hardness increased with the concentration of carbides in the Ni-matrix. The flexural strength also increased by adding the carbides. The decline was larger for the sample with addition of 5% 5% TaC and NbC. In general, compositions containing added carbide 10% showed less porous and more uniform distribution of carbides in the nickel matrix microstructural appearance. Thus, both added carbide and plasma sintering improved density, hardness, flexural strength and microstructural appearance of the composites

Ecologia alimentar de aves insetívoras de um fragmento de mata decídua do extremo norte da Mata Atlântica

The diet study of birds has contributed historically as a model for use to understanding ecological patterns and strategies used by several other groups of vertebrates, which are observed in season patterns and temporal availability of resources, and other. This study has as objective generate information concerning the diet of insectivorous birds during rainy season and dry season, as well as analyze Index food importance, niche overlap, niche breadth, electivity, and seasonal availability of prey. The study was conducted in a fragment of about 270 ha (center coordinates and 5 º 53'S 35 ° 23'W). The sampling of birds occurred between March 2008 and December 2009 in three pre-established trails. Catches of birds were performed using 10 mist nets placed in line, where each trails was sampled once a month. Samples of pellets were obtained by means of tartar emetic. Sampling of availability of prey occurred between February 2009 to December 2009. We used two methods of sampling (pitfall traps and Shake cloths). We captured 269 individuals of 21 species of insectivorous birds. We collected 4116 invertebrates of which 3259 in the rainy season and 857 in the dry season. We obtained 174 samples stomach, where 10 species were exclusively insectivorous diet, nine fed on insect/plant material, an insect/plant material/vertebrate and one for insect/vertebrate. During the rainy season was observing difference between the consumption of items with higher food importance. The Coleoptera was item with higher food importance (73%), followed by Formicidae (7%) and Araneae (6%). During the dry season, no difference was found difference between the consumption of items with higher food importance. The Coleoptera was item with higher food importance (34%), followed by seeds (29%) and Formicidae (18%). The highest levels of niche overlap occurred during the rainy season, while the dry season was characterized by high levels of niche 11 segregation. This indicates that the local insectivorous birds community was structured differently between periods. No was found correlation between the values of niche breadth to the mean weight of the body size. We observed seasonal patterns in prey availability, with the peak availability of invertebrates observed seasonal patterns in rainy season. The insectivorous birds selected the same species richness during both periods, showing a specialized diet. Thamnophilus pelzelni was the only species that had their diet influenced by seasonality. Regarding the overall diet of insectivorous birds, observed a high consumption of prey, whose food availability caused the birds could invest and increase their food resources

SEDIMENT BIOTURBATION POTENTIAL of UCA RAPAX and UCA URUGUAYENSIS AS A RESULT of THEIR FEEDING ACTIVITY

Bioturbation of mangrove sediments by Uca uruguayensis (Nobili, 1901) and U. rapax (Smith, 1870) was compared based on the grain-size composition and organic content in surface sediment around the burrow and feeding pellets in two mangrove zones of the Sao Vicente Estuary, state of São Paulo, Brazil. For each species, 25 burrows with active crabs were selected. All pellets within a 15-cm radius of each burrow were carefully collected; samples of substrate were taken; and the crab occupant was excavated, sexed, and measured for carapace width (CW). The number of spoon-tipped setae on the second maxilliped of each species was estimated; U. uruguayensis showed more of these setae than U. rapax. For both species, the sediment post-processed by feeding activity (feeding pellets) showed a similar increase of coarser fractions and a smaller organic content. However. U. uruguayensis was more efficient in removing organic matter (88.1%) from the sediment than U. rapax (37.5%). These results suggest that different numbers of spoon-tipped setae on the second maxillipeds of the fiddler crabs do not affect the potential for grain-size selection, but result in differing abilities to remove organic matter from the sediment.

Desempenho produtivo de Pseudoplatystoma corruscans estocados em sistemas de criação: semi-intensivo (viveiro escavado) e intensivo (tanque-rede)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do manejo alimentar no desempenho do matrinxã Brycon amazonicus em tanques de cultivo

O objetivo deste estudo foi avaliar o efeito do horário, taxa e freqüência de alimentação no desempenho do matrinxã (Brycon amazonicus) em tanques de cultivo. O trabalho foi realizado no Centro de Aqüicultura da UNESP, Jaboticabal, SP, no período de outubro de 1997 a janeiro de 1998 sendo realizados três ensaios, em tanques de 200m² subdivididos em 4 de 50 m². No ensaio I foram medidos em 3 períodos (manhã-m; meio do dia-md e tarde-t) o consumo de ração, índice de ingestão, tempo de saciação e velocidade de ingestão em peixes com peso médio de 232,13 g, alimentados com ração extrusada (32% de PB). Não foi observada diferença significativa nos parâmetros analisados. No ensaio II, em peixes com peso médio de 233,98 g, foi medido o consumo médio de ração, em intervalos de duas horas, das 07 às 19 horas. O maior consumo ocorreu quando o matrinxã foi alimentado às 17 horas. No ensaio III, durante 57 dias, os peixes foram alimentados uma vez ao dia (m); uma vez ao dia (t); duas vezes ao dia(m/t) e três vezes ao dia (m,md,t). Peixes com peso médio inicial de 322,25 g receberam ração com 32% de PB, na quantidade de 2% do PV. Não foram observadas diferenças significativas no ganho de peso diário (3,17; 2,80; 3,04 e 2,81 g) e na conversão alimentar aparente (2,11; 2,48; 2,16 e 2,31:1). Concluiu-se que a freqüência de alimentação de uma vez ao dia, em qualquer horário, mostrou ser suficiente.