Emissions from realistic operation of residential wood pellets heating systems

Emissions from residential combustion appliances vary significantly depending on the firing behaviours and combustion conditions, in addition to combustion technologies and fuel quality. Although wood pellet combustion in residential heating boilers is efficient, the combustion conditions during start-up and stop phases are not optimal and produce significantly high emissions such as carbon monoxide and hydrocarbon from incomplete combustion. The emissions from the start-up and stop phases of the pellet boilers are not fully taken into account in test methods for ecolabels which primarily focus on emissions during operation on full load and part load. The objective of the thesis is to investigate the emission characteristics during realistic operation of residential wood pellet boilers in order to identify when the major part of the annual emissions occur. Emissions from four residential wood pellet boilers were measured and characterized for three operating phases (start-up, steady and stop). Emissions from realistic operation of combined solar and wood pellet heating systems was continuously measured to investigate the influence of start-up and stop phases on total annual emissions. Measured emission data from the pellet devices were used to build an emission model to predict the annual emission factors from the dynamic operation of the heating system using the simulation software TRNSYS. Start-up emissions are found to vary with ignition type, supply of air and fuel, and time to complete the phase. Stop emissions are influenced by fan operation characteristics and the cleaning routine. Start-up and stop phases under realistic operation conditions contribute 80 – 95% of annual carbon monoxide (CO) emission, 60 – 90% total hydrocarbon (TOC), 10 – 20% of nitrogen oxides (NO), and 30 – 40% particles emissions. Annual emission factors from realistic operation of tested residential heating system with a top fed wood pelt boiler can be between 190 and 400 mg/MJ for the CO emissions, between 60 and 95 mg/MJ for the NO, between 6 and 25 mg/MJ for the TOC, between 30 and 116 mg/MJ for the particulate matter and between 2x10-13 /MJ and 4x10-13 /MJ for the number of particles. If the boiler has the cleaning sequence with compressed air such as in boiler B2, annual CO emission factor can be up to 550 mg/MJ. Average CO, TOC and particles emissions under realistic annual condition were greater than the limits values of two eco labels. These results highlight the importance of start-up and stop phases in annual emission factors (especially CO and TOC). Since a large or dominating part of the annual emissions in real operation arise from the start-up and stop sequences, test methods required by the ecolabels should take these emissions into account. In this way it will encourage the boiler manufacturers to minimize annual emissions. The annual emissions of residential pellet heating system can be reduced by optimizing the number of start-ups of the pellet boiler. It is possible to reduce up to 85% of the number of start-ups by optimizing the system design and its controller such as switching of the boiler pump after it stops, using two temperature sensors for boiler ON/OFF control, optimizing of the positions of the connections to the storage tank, increasing the mixing valve temperature in the boiler circuit and decreasing the pump flow rate. For 85 % reduction of start-ups, 75 % of CO and TOC emission factors were reduced while 13% increase in NO and 15 % increase in particle emissions was observed.

Numerical tests of an adaptive sectioned airfoil actuated by shape memory alloys

The main objective of this work is to illustrate an application of angular active control in a sectioned airfoil using shape memory alloys. In the proposed model, one wants to establish the shape of the airfoil profile based on the determination of an angle between its two sections. This angle is obtained by the effect of the shape memory of the alloy by passing an electric current that modifies the temperature of the wire through the Joule effect, changing the shape of the alloy. This material is capable of converting thermal energy into mechanical energy and once permanently deformed, the material can return to its original shape by heating. Due to the presence of nonlinear effects, especially in the mathematical model of the alloy, this work proposes the application of a control system based on fuzzy logic. Through numerical tests, the performance of the fuzzy controller is compared with an on-off controller applied in a sectioned airfoil model.

Distribution pattern, surface tension and contact angle of herbicides associated to adjuvants on spraying and control of Ipomoea hederifolia under rainfall incidence

ABSTRACTScarlet Morning Glory is considered to be an infesting weed that affects several crops and causes serious damage. The application of chemical herbicides, which is the primary control method, requires a broad knowledge of the various characteristics of the solution and application technology for a more efficient phytosanitary treatment. Therefore this study aimed to characterize the effect of rainfall incidence on the control of Ipomoea hederifolia, considering droplet size, surface tension, contact angle of droplets formed by herbicides liquid on vegetal and artificial surfaces, associated to adjuvants and the volumetric distribution profile of the spray jet. The addition of the adjuvants to the herbicide spraying liquid improved the application quality, as it influenced the angle formed by the spray by broadening the deposition band of the spray nozzle and thus the possible distance between the nozzles on spray boom and due the changes at droplet size, which contribute to a safety application. The rainfall occurrence affected negatively the weed control with the different spraying liquids and also the dry matter weight, suggesting that the phytosanitary product applied was washed off.

Does Immediate Access to Birth Control Help Prevent Pregnancy? A Comparison of Onsite Provision Versus Off Campus Referral for Contraception at Two School-Based Clinics

PURPOSE: The purpose of this study was to assess the impact of different policies on access to hormonal contraception and pregnancy rates at two high school-based clinics. METHODS: Two clinics in high schools (Schools A and B), located in a large urban district in the southwest US, provide primary medical care to enrolled students with parental consent; the majority of whom have no health insurance coverage. The hormonal contraceptive dispensing policy of at School clinic A involves providing barrier, hormonal and emergency contraceptive services on site. School clinic B uses a referral policy that directs students to obtain contraception at an off-campus affiliated family planning clinic. Baseline data (age, race and history of prior pregnancy) on female students seeking hormonal contraception at the two clinics between 9/2008-12/2009 were extracted from an electronic administrative database (AHLERS Integrated System). Data on birth control use and pregnancy tests for each student was then tracked electronically through 3/31/2010. The outcomes measures were accessing hormonal contraception and positive pregnancy tests at any point during or after birth control use were started through 12/2009. The appointment keeping rate for contraceptive services and the overall pregnancy rates were compared between the two schools. In addition the pregnancy rates were compared between the two schools for students with and without a prior history of pregnancy. RESULTS: School clinic A: 79 students sought hormonal contraception; mean age 17.5 years; 68% were > 18 years; 77% were Hispanic; and 20% reported prior pregnancy. The mean duration of the observation period was 13 months (4-19 months). All 79 students received hormonal contraception (65% pill and 35% long acting progestin injection) onsite. During the observation period, the overall pregnancy rate was 6% (5/79); 4.7% (3/63) among students with no prior pregnancy. School clinic B: 40 students sought hormonal contraception; mean age 17.5 years; 52% > 18 years; 88 % were Hispanic; and 7.5% reported prior pregnancy. All 40 students were referred to the affiliated clinic. The mean duration of the observation period was 11.9 months (4-19 months). 50% (20) kept their appointment. Pills were dispensed to 85% (17/20) and 15% (3/20) received long acting progestin injection. The overall pregnancy rate was 20% (8/40); 21.6% (8/37) among students with no prior pregnancy. A significantly higher frequency of students seeking hormonal contraception kept their initial appointment for birth control at the school dispensing onsite contraception compared to the school with a referral policy for contraception (p<0.05). The pregnancy rate was significantly higher for the school with a referral policy for contraception compared to the school with onsite contraceptive services (p< 0.05). The pregnancy rate was also significantly higher for students without a prior history of pregnancy in the school with a referral policy for contraception (21.6%) versus the school with onsite contraceptive services (4.7%) (p< 0.05). CONCLUSION: This preliminary study showed that School clinic B with a referral policy had a lower appointment keeping rate for contraceptive services and a higher pregnancy rate than School clinic A with on-site contraceptive services. An on-site dispensing policy for hormonal contraceptives at high school-based health clinics may be a convenient and effective approach to prevent unintended first and repeat pregnancies among adolescents who seek hormonal contraception. This study has strong implications for reproductive health policy, especially as directed toward high-risk teenage populations.

Perspectives on the electrically induced properties of electrospun cellulose/liquid crystal devices

A mat of electrospun cellulose fibers are deposed on transparent conductive oxide covered glass, and two such plates enclose a nematic liquid crystal. Thus two new types of Cellulose based Polymer Dispersed Liquid Crystal devices, based on hydroxypropylcellulose and Cellulose Acetate and the nematic liquid crystal E7 have been obtained. The current-voltage characteristics indicates ionic type conduction. Heating-cooling cycles have been applied on the samples and the activation energies have been determined. Simultaneously with the thermo-stimulated currents, the optical transmission dependence on the d.c. electric field and temperature was registered. ON-OFF switching times have been determined for different control voltages. (C) 2011 Elsevier B.V. All rights reserved.

On performance of distributed model predictive control in power system frequency regulation

This paper describes the implementation of a distributed model predictive approach for automatic generation control. Performance results are discussed by comparing classical techniques (based on integral control) with model predictive control solutions (centralized and distributed) for different operational scenarios with two interconnected networks. These scenarios include variable load levels (ranging from a small to a large unbalance generated power to power consumption ratio) and simultaneously variable distance between the interconnected networks systems. For the two networks the paper also examines the impact of load variation in an island context (a network isolated from each other).

Impact of insecticide resistance on the field control of Aedes aegypti in the State of São Paulo

IntroductionThe need to control dengue transmission by means of insecticides has led to the development of resistance to most of the products used worldwide against mosquitoes. In the State of São Paulo, the Superintendência de Controle de Endemias(SUCEN) has annually monitored the susceptibility of Aedes aegypti to insecticides since 1996; since 1999, surveys were conducted in collaboration with the National Network of Laboratories (MoReNAa Network) and were coordinated by the Ministry of Health. In this study, in addition to the biological characterization of insecticide resistance in the laboratory, the impact of resistance on field control was evaluated for vector populations that showed resistance in laboratory assays.MethodsField efficacy tests with larvicides and adulticides were performed over a 13-year period, using World Health Organization protocols.ResultsData from the field tests showed a reduction in the residual effect of temephos on populations with a resistance ratio of 3. For adults, field control was less effective in populations characterized as resistant in laboratory qualitative assays, and this was confirmed using qualitative assays and field evaluation.ConclusionsOur results indicated that management of resistance development needs to be adopted when insect populations show reduced susceptibility. The use of insecticides is a self-limiting tool that needs to be applied cautiously, and dengue control requires more sustainable strategies.

Cross-sectional Study on Blood Pressure Control in the Department of Nephrology of the Escola Paulista de Medicina - UNIFESP

OBJECTIVE - To assess hypertension control rates in a specialized university-affiliated medical department, the influence of sex, diabetes, and obesity on that control, and the strategies for the treatment of hypertension. METHODS - We carried out a cross-sectional study with 1,210 patients followed up for at least 6 months. Information was gathered from medical and nursing records and comprised the following data: sex, age, weight, height, abdominal and hip circumferences, blood pressure, and class and number of the antihypertensive drugs prescribed. To assess obesity, we used body mass index and waist/hip ratio. Blood pressure was considered under control when its levels were below 140/90 mmHg. RESULTS - The study consisted of 73% females and 27% males. Most females (31.7%) were 50 to 59 years of age, and most males (28.3%) were 60 to 69 years. The blood pressure control rate found was 20.9% for the 1,210 patients and 23.4% for the hypertensive diabetic patients (n=290). Despite the low control rates found, 70% of the patients used 1 or 2 antihypertensive medications. A high prevalence of obesity (38%) was observed, and females had a greater abdominal obesity index than males did (90% vs 82%, p<0.05). Patients with a greater body mass index had less control of blood pressure. CONCLUSION - The percentage of hypertensive patients with controlled blood pressure levels was low and was associated with a high prevalence of obesity. These data indicate the need for reviewing the strategies of global treatment for hypertension.

Low transmission areas of schistosomiasis in Venezuela: consequences on the diagnosis, treatment, and control

Schistosomiasis low transmission areas as Venezuela, can be defined as those where the vector exists, the prevalence of active cases is under 25%, individuals with mild intensity of infection predominate and are mostly asymptomatic. These areas are the consequence of effective control programs, however, "silent" epidemiological places are difficult to trace, avoiding the opportune diagnosis and treatment of infected persons. Clinic and abdominal ultrasound have not shown to discriminate infected from uninfected persons in areas where besides Schistosoma mansoni, intestinal parasites are the rule. Under these conditions, serology remains as a very valuable diagnostic tool, since it gives a closer approximation to the true prevalence. In this sense, circumoval precipitin test, ELISA-SEA with sodium metaperiodate, and alkaline phosphatase immunoassay joined to coprology allow the identification of the "schistosomiasis cases". In relation to public health, schistosomiasis has been underestimated by the sanitary authorities and the investment on its control is being transferred to other diseases of major social and political relevance neglecting sanitary efforts and allowing growth of snail population. Some strategies of diagnosis and control should be done before schistosomiasis reemergence occurs in low transmission areas.

HLA-Bw4 identifies a population of HIV-infected patients with an increased capacity to control viral replication after structured treatment interruption.

OBJECTIVES: After structured treatment interruption (STI) of treatment for HIV-1, a fraction of patients maintain suppressed viral loads. Prospective identification of such patients might improve HIV-1 treatment, if selected patients are offered STI. METHODS: We analysed the effect of previously identified genetic modulators of HIV-1 disease progression on patients' ability to suppress viral replication after STI. Polymorphisms in the genes killer cell immunoglobulin-like receptor 3DLI (KIR3DL1)/KIR3DS1, human leucocyte antigen B (HLA-B) and HLA Complex P5 (HCP5), and a polymorphism affecting HLA-C surface expression were analysed in 130 Swiss HIV Cohort Study patients undergoing STI. Genotypes were correlated with viral load levels after STI. RESULTS: We observed a statistically significant reduction in viral load after STI in carriers of HLA-B alleles containing either the Bw480Thr or the Bw480Ile epitope (mean adjusted effect on post-STI viral load: -0.82 log HIV-1 RNA copies/ml, P < 0.001; and -1.12 log copies/ml, P < 0.001, respectively). No significant effects were detected for the other polymorphisms analysed. The likelihood of being able to control HIV-1 replication using a prespecified cut-off (viral load increase < 1000 copies/ml) increased from 39% in Bw4-negative patients to 53% in patients carrying Bw4-80Thr, and to 65% in patients carrying Bw4-80Ile (P = 0.02). CONCLUSIONS: These data establish a significant impact of HLA-Bw4 on the control of viral replication after STI.

Will the Convention on Biological Diversity put an end to biological control?

Will the Convention on Biological Diversity put an end to biological control? Under the Convention on Biological Diversity countries have sovereign rights over their genetic resources. Agreements governing the access to these resources and the sharing of the benefits arising from their use need to be established between involved parties. This also applies to species collected for potential use in biological control. Recent applications of access and benefit sharing principles have already made it difficult or impossible to collect and export natural enemies for biological control research in several countries. If such an approach is widely applied it would impede this very successful and environmentally safe pest management method based on the use of biological diversity. The International Organization for Biological Control of Noxious Animals and Plants has, therefore, created the "Commission on Biological Control and Access and Benefit Sharing". This commission is carrying out national and international activities to make clear how a benefit sharing regime might seriously frustrate the future of biological control. In addition, the IOBC Commission members published information on current regulations and perceptions concerning exploration for natural enemies and drafted some 30 case studies selected to illustrate a variety of points relevant to access and benefit sharing. In this article, we summarize our concern about the effects of access and benefit sharing systems on the future of biological control.

Microstructure of the superior longitudinal fasciculus predicts stimulation-induced interference with on-line motor control.

A cortical visuomotor network, comprising the medial intraparietal sulcus (mIPS) and the dorsal premotor area (PMd), encodes the sensorimotor transformations required for the on-line control of reaching movements. How information is transmitted between these two regions and which pathways are involved, are less clear. Here, we use a multimodal approach combining repetitive transcranial magnetic stimulation (rTMS) and diffusion tensor imaging (DTI) to investigate whether structural connectivity in the 'reaching' circuit is associated to variations in the ability to control and update a movement. We induced a transient disruption of the neural processes underlying on-line motor adjustments by applying 1Hz rTMS over the mIPS. After the stimulation protocol, participants globally showed a reduction of the number of corrective trajectories during a reaching task that included unexpected visual perturbations. A voxel-based analysis revealed that participants exhibiting higher fractional anisotropy (FA) in the second branch of the superior longitudinal fasciculus (SLF II) suffered less rTMS-induced behavioral impact. These results indicate that the microstructural features of the white matter bundles within the parieto-frontal 'reaching' circuit play a prominent role when action reprogramming is interfered. Moreover, our study suggests that the structural alignment and cohesion of the white matter tracts might be used as a predictor to characterize the extent of motor impairments.

Effects of metformin on the glycemic control, lipid profile, and arterial blood pressure of type 2 diabetic patients with metabolic syndrome already on insulin

Fifty-seven type 2 diabetic patients with metabolic syndrome and on insulin were assessed by a paired analysis before and 6 months after addition of metformin as combination therapy to evaluate the impact of the association on glycemic control, blood pressure, and lipid profile. This was a historical cohort study in which the files of type 2 diabetic patients with metabolic syndrome on insulin were reviewed. The body mass index (BMI), waist circumference, lipid profile, A1C level, fasting blood glucose level, daily dose of NPH insulin, systolic blood pressure, and diastolic blood pressure were assessed in each patient before the start of metformin and 6 months after the initiation of combination therapy. Glycemic control significantly improved (P < 0.001) after the addition of metformin (1404.4 ± 565.5 mg/day), with 14% of the 57 patients reaching A1C levels up to 7%, and 53% reaching values up to 8%. There was a statistically significant reduction (P < 0.05) of total cholesterol (229.0 ± 29.5 to 214.2 ± 25.0 mg/dL), BMI (30.7 ± 5.4 to 29.0 ± 4.0 kg/m²), waist circumference (124.6 ± 11.7 to 117.3 ± 9.3 cm), and daily necessity of insulin. The reduction of total cholesterol occurred independently of the reductions of A1C (9.65 ± 1.03 to 8.18 ± 1.01%) and BMI and the reduction of BMI and WC did not interfere with the improvement of A1C. In conclusion, our study showed the efficacy of the administration of metformin and insulin simultaneously without negative effects. No changes were detected in HDL-cholesterol or blood pressure.

Control of multi-actuator system by an electrically driven hydraulic pump-motor

The awareness and concern of our environment together with legislation have set more and more tightening demands for energy efficiency of non-road mobile machinery (NRMM). Integrated electro-hydraulic energy converter (IEHEC) has been developed in Lappeenranta University of Technology (LUT). The elimination of resistance flow, and the recuperation of energy makes it very efficient alternative. The difficulties of IEHEC machine to step to the market has been the requirement of one IEHEC machine per one actuator. The idea is to switch IEHEC between two actuators of log crane using fast on/off valves. The control system architecture is introduced. The system has been simulated in co-simulation using two different software. The simulated responses of pump-controlled system is compared to the responses of the conventional valve-controlled system.

Efficient fuzzy control of a rotary inverted pendulum based on LQR mapping

This paper develops fuzzy methods for control of the rotary inverted pendulum, an underactuated mechanical system. Two control laws are presented, one for swing up and another for the stabilization. The pendulum is swung up from the vertical down stable position to the upward unstable position in a controlled trajectory. The rules for the swing up are heuristically written such that each swing results in greater energy build up. The stabilization is achieved by mapping a stabilizing LQR control law to two fuzzy inference engines, which reduces the computational load compared with using a single fuzzy inference engine. The robustness of the balancing control is tested by attaching a bottle of water at the tip of the pendulum.