Survey of trace elements (Al, As, Cd, Cr, Co, Hg, Mn, Ni, Pb, Se, and Si) in retail samples of flavoured and bottled waters

Concentrations of eleven trace elements (Al, As, Cd, Cr, Co, Hg, Mn, Ni, Pb, Se, and Si) were measured in 39 (natural and flavoured) water samples. Determinations were performed using graphite furnace electrothermetry for almost all elements (Al, As, Cd, Cr, Co, Mn, Ni, Pb, and Si). For Se determination hydride generation was used, and cold vapour generation for Hg. These techniques were coupled to atomic absorption spectrophotometry. The trace element content of still or sparkling natural waters changed from brand to brand. Significant differences between natural still and natural sparkling waters (p<0.001) were only apparent for Mn. The Mann–Whitney U-test was used to search for significant differences between flavoured and natural waters. The concentration of each element was compared with the presence of flavours, preservatives, acidifying agents, fruit juice and/or sweeteners, according to the labelled composition. It was shown that flavoured waters generally increase the trace element content. The addition of preservatives and acidifying regulators had a significant influence on Mn, Co, As and Si contents (p<0.05). Fruit juice can also be correlated to the increase of Co and As. Sweeteners did not provide any significant difference in Mn, Co, Se and Si content.

Voltammetric oxidation of drugs of abuse III. Heroin and metabolites

The oxidative behavior of heroin in aqueous solution is reported. In order to identify its oxidation peaks, several metabolites, 6-monoacetylmorphine, 3-monoacetylmorphine and norheroin, were synthesized and their electrochemical behavior studied using differential pulse voltammetry. The anodic waves observed for heroin correspond to the oxidation of the tertiary amine group and its follow-up product (secondary amine), and to the oxidation of the phenolic group obtained from hydrolysis, at alkaline pHs, of the 3-acetyl group. The results enabled a new oxidative mechanism for heroin to be proposed in which a secondary amine, norheroin, and an aldehyde are obtained. The voltammetric behavior of 6-monoacetylmorphine and morphine was found to be similar demonstrating that the presence of an acetyl substituent on the 6-hydroxy group does not have a relevant influence on the peak potential of the wave resulting from oxidation of the 3-phenolic group.

Dispositivos moleculares fluorescentes contendo receptores poliamínicos

O objectivo desta tese é a caracterização global de algumas famílias de compostos poliamínicos com grupos aromáticos fluorescentes. Estes têm potencial deaplicação como dispositivos moleculares, incluindo quimiossensores, interruptores moleculares,máquinas moleculares ou sistemas de processamento de informação moleculares. Estes compostos possuem poliaminas que podem actuar como unidades receptoras de várias espécies químicas, como protões, iões metálicos ou aniões, e os tornam solúveis em água. Contêm também grupos aromáticos fluorescentes (naftaleno, antraceno, pireno), que actuam como unidades sinalizadoras do estado do receptor. No Capítulo 1 são apresentados métodos de síntese e purificação de compostos poliamínicos, juntamente com descrições pormenorizadas das sínteses. Nos Capítulos 2 a 8 são caracterizados diversos compostos, quando livres em solução aquosa, e na presença de iões de metais de transição e de ATP. São usadas técnicas de espectrofotometria no UV-visível, espectrofluorimetria no estado estacionário e de contagem de fotão único correlacionada no tempo, complementadas com dados potenciométricos e de RMN fornecidos pelo grupo do Prof. Enrique García-España da Universidade de Valência, Espanha. No Capítulo 2 estudam-se compostos com grupos antraceno. Verifica-se supressão de emissão a pH básico, comum a todos os compostos poliamínicos, e caracterizam-se factores que influenciam nesse fenómeno. No Capítulo 3 analisam-se compostos de naftaleno. Verificam-se excímeros intramoleculares em compostos com dois grupos naftaleno. Para os formar ocorre um movimento fotoinduzido de flexão, pelo que esses compostos podem ser considerados máquinas moleculares. No Capítulo 4 estudam-se compostos com grupos pireno. Observam-se excímeros intramoleculares nos compostos com dois fluoróforos. No Capítulo 5 caracterizam-se compostos com dois grupos aromáticos diferentes(vários compostos com naftaleno e antraceno, um com pireno e antraceno e um com pireno e naftaleno). Verifica-se transferência de energia do grupo naftaleno para o antraceno (que parece evoluir de acordo com a teoria de Förster), de pireno para antraceno e de naftaleno para pireno. No Capítulo 6 examinam-se dois compostos de antraceno na presença de iões metálicos. Verifica-se aumento de emissão presença de Zn(II) e Cd(II), e supressão de emissão na presença de Cu(II) e Ni(II). Caracteriza-se o comportamento de um deles do ponto de vista de operações lógicas ao nível molecular. No Capítulo 7 caracteriza-se um composto de naftaleno na presença de vários iões metálicos. Verifica-se supressão de emissão com iões de metais de transição do 3ºperíodo com níveis na presença de Zn(II), Cd(II) e Al(III). Não se verifica efeito na presença de iões alcalinos, alcalino-terrosos, lantanídeos, Sn(II) e Pb(II). No Capítulo 8 estuda-se a interacção de compostos poliamínicos com ATP. Verifica-se em qualquer pH a ocorrência de empilhamento aromáticos do ATP e composto poliamínico, e ancoragem do grupo polifosfato do ATP com a poliamina. Verifica-se supressão de emissão do composto poliamínico a pH ácido, principalmente por transferência electrónica fotoinduzida do seu grupo aromático para o grupo adenina protonado do ATP. Num composto com antraceno e naftaleno, continua-se a verificar transferência de energia d incompletamente preenchidos, e com Hg(II), e aumento de emissãoπ-π entre os grupos

Tratamentos termomecânicos de ligas do sistema Ni-Ti

As ligas de Níquel‑Titânio (Ni‑Ti) são as mais atractivas entre as ligas com memória de forma devido às suas boas propriedades funcionais juntamente com a elevada resistência e melhor ductilidade. As transformações de fases associadas ao efeito de memória de forma (EMF) podem ser em uma etapa, B19’ (martensite) ↔ B2 (austenite), em duas ou em múltiplas etapas, incluindo a fase‑R intermédia dependendo da história térmica e termomecânica da liga. As temperaturas de transformação são geralmente observadas acima da temperatura ambiente para as ligas ricas em Ti, enquanto nas ricas em Ni se situam abaixo da temperatura ambiente. O objectivo da presente dissertação foi o de investigar as modificações nas propriedades funcionais e estruturais em uma liga de Ni‑Ti rica em Ti (49,0%at.Ni‑51,0%at.Ti) sujeita a diferentes tratamentos térmicos e termomecânicos de marforming e ausforming. Para melhor entender os fenómenos presentes nesta liga foi feito um paralelismo com outras duas ligas de Ni‑Ti: (i) equiatómica com EMF acima da temperatura ambiente e (ii) rica em Ni superelástica (SE) à temperatura ambiente. Com o intuito de uma análise completa das transformações de fases foram utilizadas durante ciclos térmicos diversas técnicas de caracterização: Calorimetria Diferencial de Varrimento (DSC), Resistividade Eléctrica (RE), Dilatometria (DT) e Difracção de Raios‑X (DRX) convencional e por radiação sincrotrão – rotina e textura. Foram também utilizadas outras técnicas à temperatura ambiente com o intuito de observar características microestruturais (Microscopia Óptica (MO) e Electrónica de Varrimento (SEM)) e mecânicas (Microdureza e Ultra‑Microdureza Vickers, e Tracção). A liga de Ni‑Ti rica em Ti tem as suas transformações directa e inversa fortemente afectadas pelos tratamentos termomecânicos, devido à formação de fase‑R durante a transformação directa em duas (B2®R®B19’) ou em múltiplas etapas (B2®R, B2®B19’ e R®B19’). Os tratamentos termomecânicos conducentes à sequência de transformação B2®R®B19’ decrescem a temperatura de fim da formação de B19’ para próximo da temperatura ambiente e apresentam maior estabilidade nas temperaturas e histereses de transformação.

Contributions à la Paléontologie du Miocène moyen continental du Bassin du Tage. III - Mammifères - Póvoa de Santarém, Pêro Filho et Chões (Secorio). Conclusions générales

This study on middle Miocene mammalian faunas from Tagus'basin deals particularly with some small mammals hitherto undescribed from Portugal, including a new Glirid (Paraglirulus scalabicensis nov. sp.); it allows an accurate datation by biostratigraphical standards, Megacricetodon crusafonti, Fahlbuschia darocensis, Cricetodon jotae being characteristic of mammalian MN6 unit, thus their age is nearly that of Sansan and Manchones (however the presence of Peridyromys hamadryas and Lagopsis verus do suggest, amidst this biozone, a somewhat later age than Sansan's); it contributes with indirect correlation data with marine formations, as underlying oyster-bearing beds most probably are in correspondance to the apogee of the same transgression that deposed near Lisbon ”schlier" facies from VI-a division (Serravalian, Blow's zones 10-13, Globorotalia meyeri zone); the diversity of mammalian assemblages is surely related to an environement with varied biotopes, whose characterisation becomes easier if account is taken of the preceding papers on mollusks (G. Truc) and Cyprinid fishes (J. Gaudant), and also according to some unpublished paleobotanical data (J. Pais). A table with a synthesis of all paleontological data so far known is presented.

Synthesis, characterization and reactivity of new cobalt, palladium and nickel complexes bearing α-diimines and P, O ligands

This work describes the synthesis and characterization of a series of new α-diimine and P,O, β-keto and acetamide phosphines ligands, and their complexation to Ni(II), Co(II),Co(III) and Pd(II) to obtain a series of new compounds aiming to study their structural characteristics and to test their catalytic activity. All the compounds synthesized were characterized by the usual spectroscopic and spectrometric techniques: Elemental Analysis, MALDI-TOF-MS spectrometry, IR, UV-vis, 1H, 13C and 31P NMR spectroscopies. Some of the paramagnetic compounds were also characterized by EPR. For the majority of the compounds it was possible to solve their solid state structure by single crystal X-ray diffraction. Tests for olefin polymerization were performed in order to determine the catalytic activity of the Co(II) complexes. Chapter I presents a brief introduction to homogenous catalysis, highlighting the reactions catalyzed by the type of compounds described in this thesis, namely olefin polymerization and oligomerization and reactions catalyzed by the complexes bearing α-diimines and P,O type ligands. Chapter II is dedicated to the description of the synthesis of new α-diimines cobalt (II) complexes, of general formula [CoX2(α-diimine)], where X = Cl or I and the α-diimines are bis(aryl)acenaphthenequinonediimine) (Ar-BIAN) and 1,4-diaryl-2,3-dimethyl-1,4-diaza-1,3-butadiene (Ar-DAB). Structures solved by single crystal X-ray diffraction were obtained for all the described complexes. For some of the compounds, X-band EPR measurements were performed on polycrystalline samples, showing a high-spin Co(II) (S = 3/2) ion, in a distorted axial environment. EPR single crystal experiments on two of the compounds allowed us to determine the g tensor orientation in the molecular structure. In Chapter III we continue with the synthesis and characterization of more cobalt (II)complexes bearing α-diimines of general formula [CoX2(α-diimine)], with X = Cl or I and α-diimines are bis(aryl)acenaphthenequinonediimine) (Ar-BIAN) and 1,4-diaryl-2,3-dimethyl- 1,4-diaza-1,3-butadiene (Ar-DAB). The structures of three of the new compounds synthesized were determined by single crystal X-ray diffraction. A NMR paramagnetic characterization of all the compounds described is presented. Ethylene polymerization tests were done to determine the catalytic activity of several of the Co(II) complexes described in Chapter II and III and their results are shown. In Chapter IV a new rigid bidentate ligand, bis(1-naphthylimino)acenaphthene, and its complexes with Zn(II) and Pd(II), were synthesized. Both the ligand and its complexes show syn and anti isomers. Structures of the ligand and the anti isomer of the Pd(II) complex were solved by single crystal X-ray diffraction. All the compounds were characterized by elemental analysis, MALDI-TOF-MS spectrometry, and by IR, UV-vis, 1H, 13C, 1H-1H COSY, 1H-13C HSQC, 1H-13C HSQC-TOCSY and 1H-1H NOESY NMR when necessary. DFT studies showed that both conformers of [PdCl2(BIAN)] are isoenergetics and can be obtain experimentally. However, we can predict that the isomerization process is not available in square-planar complex, but is possible for the free ligand. The molecular geometry is very similar in both isomers, and only different orientations for naphthyl groups can be expected. Chapter V describes the synthesis of new P, O type ligands, β-keto phosphine, R2PCH2C(O)Ph, and acetamide phosphine R2PNHC(O)Me, as well as a series of new cobalt(III) complexes namely [(η5-C5H5)CoI2{Ph2PCH2C(O)Ph}], and [(η5- C5H5)CoI2{Ph2PNHC(O)Me}]. Treating these Co(III) compounds with an excess of Et3N, resulted in complexes η2-phosphinoenolate [(η5-C5H5)CoI{Ph2PCH…C(…O)Ph}] and η2- acetamide phosphine [(η5-C5H5)CoI{Ph2PN…C(…O)Me}]. Nickel (II) complexes were also obtained: cis-[Ni(Ph2PN…C(…O)Me)2] and cis-[Ni((i-Pr)2PN…C(…O)Me)2]. Their geometry and isomerism were discussed. Seven structures of the compounds described in this chapter were determined by single crystal X-ray diffraction. The general conclusions of this work can be found in Chapter VI.

In-situ X-ray diffraction studies during growth of Ni-Ti shape memory alloy films and their complementary ex-situ characterization

Shape Memory Alloy (SMA) Ni-Ti films have attracted much interest as functional and smart materials due to their unique properties. However, there are still important issues unresolved like formation of film texture and its control as well as substrate effects. Thus, the main challenge is not only the control of the microstructure, including stoichiometry and precipitates, but also the identification and control of the preferential orientation since it is a crucial factor in determining the shape memory behaviour. The aim of this PhD thesis is to study the optimisation of the deposition conditions of films of Ni-Ti in order to obtain the material fully crystallized at the end of the deposition, and to establish a clear relationship between the substrates and texture development. In order to achieve this objective, a two-magnetron sputter deposition chamber has been used allowing to heat and to apply a bias voltage to the substrate. It can be mounted into the six-circle diffractometer of the Rossendorf Beamline (ROBL) at the European Synchrotron Radiation Facility (ESRF), Grenoble, France, enabling an in-situ characterization by X-ray diffraction(XRD) of the films during their growth and annealing. The in-situ studies enable us to identify the different steps of the structural evolution during deposition with a set of parameters as well as to evaluate the effect of changing parameters on the structural characteristics of the deposited film. Besides the in-situ studies, other complementary ex-situ characterization techniques such as XRD at a laboratory source, Rutherford backscattering spectroscopy(RBS), Auger electron spectroscopy (AES), cross-sectional transmission electron microscopy (X-TEM), scanning electron microscopy (SEM), and electrical resistivity (ER) measurements during temperature cycling have been used for a fine structural characterization. In this study, mainly naturally and thermally oxidized Si(100) substrates, TiN buffer layers with different thicknesses (i.e. the TiN topmost layer crystallographic orientation is thickness dependent) and MgO(100) single crystals were used as substrates. The chosen experimental procedure led to a controlled composition and preferential orientation of the films. The type of substrate plays an important role for the texture of the sputtered Ni-Ti films and according to the ER results, the distinct crystallographic orientations of the Ni-Ti films influence their phase transformation characteristics.

Halogen-bonded tris (2,4-Bis(trichloromethyl)-1,3,5,triazapentadienato)-M(III) [M = Mn, Fe, Co] complexes and their catalytic activity in the peroxidative oxidation of 1-phenylethanol to acetophenone

One-pot template condensation of CCl3C=N with ammonia on a metal source [MnCl2 center dot 4H(2)O, FeCl3 center dot 6H(2)O or Co(CH3COO)(2)center dot 4H(2)O] in DMSO led to the formation of tris(2,4-bis(trichloromethyl)-1,3,5-triazapentadienato)-M(III) complexes, [M(NH=C(CCl3)NC(CCl3)=-NH}(3)]center dot n(CH3)(2)SO [M = Mn, n = 1 (1); M = Fe, n = 2 (2); M = Co, n = 2 (3)1, which were characterized using elemental analysis, and IR, ESI-MS and single-crystal X-ray analysis. The role of inter- and intramolecular non-covalent halogen and hydrogen bonds in the synthesis of 1-3 is discussed. It is shown that the crystal ionic radii of the metal ions [68.5 (Co) < 69 (Fe) < 72 (Mn), pm] are related to the corresponding Cl center dot center dot center dot Cl distances [3.178 (3) > 3.155 (2) > 3.133 (1) Al. Compounds 1-3 and the related di(triazapentadienato)-Cu(v) complex [Cu(NH=C(CCl3)NC(CCl3)=NH}2]center dot 2(CH3)(2)SO (4) act as catalyst precursors for the additive-free microwave (MW) assisted homogeneous oxidation of 1-phenylethanol with tert-butylhydroperoxide (TBHP), leading to the formation of acetophenone with yields up to 99% and TONs up to 5.0 x 10(3) after 1 h of low power (10 W) MW irradiation.

Fabrication of the three-dimensional dendritic Ni-Co films by electrodeposition on stainless steel substrates

Co-deposition of nickel and cobalt was carried out on austenitic stainless steel (AISI 304) substrates by imposing a square waveform current in the cathodic region. The innovative procedure applied in this work allows creating a stable, fully developed, and open porous three-dimensional (3D) dendritic structure, which can be used as electrode for redox supercapacitors. This study investigates in detail the influence of the applied current density on the morphology, mass, and chemical composition of the deposited Ni-Co films and the resulting 3D porous network dendritic structure. The morphology and the physicochemical composition were studied by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (W). The electrochemical behavior of the materials was evaluated by cyclic voltammetry (CV). The results highlight the mechanism involved in the coelectrodeposition process and how the lower limit current density tailors the film composition and morphology, as well as its electrochemical activity.

Mode III interlaminar fracture of carbon/epoxy laminates using the edge crack torsion (ECT) test

The mode III interlaminar fracture of carbon/epoxy laminates was evaluated with the edge crack torsion (ECT) test. Three-dimensional finite element analyses were performed in order to select two specimen geometries and an experimental data reduction scheme. Test results showed considerable non-linearity before the maximum load point and a significant R-curve effect. These features prevented an accurate definition of the initiation point. Nevertheless, analyses of non-linearity zones showed two likely initiation points corresponding to GIIIc values between 850 and 1100 J/m2 for both specimen geometries. Although any of these values is realistic, the range is too broad, thus showing the limitations of the ECT test and the need for further research.

Dynamics of transmission of Trypanosoma cruzi in a rural area of Argentina: III. Persistence of T. cruzi parasitemia among canine reservoirs in a two-year follow-up

A new cross-sectional survey of household- associated mongrel dogs as well as follow-up of previously parasitemic individuals was carried out in 1984 toy means of xenodiagnosis and serologic techniques to get a deeper insight into the relationship of T. cruzi parasitemia and age among canine hosts in a rural area of Argentina. Persistence of detectable parasitemia was age-independent, or at most, loosely related to age, confirming the pattern observed in 1982. Similarly no significant age-decreasing effect was recorded among seropositive dogs in: a) the probability of detecting parasites in a 2-year follow-up; b) their intensity of infectiousness (=infective force) for T. infestans 3rd-4th instar nymphs, as measured by the percentage of infected bugs observed in each dog xenodiagnosis. Moreover, not only was the infective force of seropositive dogs for bugs approximately constant through lifetime, but it was significantly higher than the one recorded for children in the present survey, and for human people by other researchers. Therefore, and since T. infestans field populations show high feeding frequencies on dogs, the latter are expected to make the greatest contribution to the pool of infected vectors in the rural household of Argentina. This characteristic should be sufficient to involve canine reservoirs definitely as a risk factor for human people residing in the same house. The increased severity of parasitemia observed among dogs in this survey may be related to the acute undernutrition characteristic of canine populations of poor rural areas in our country, which is expected to affect the ability of the host to manage the infection.

Utilização de imagem LISS III para análise de espaços verdes em Lisboa

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica

Indicadores das condições nutricionais na região do Polonoroeste: III. Estudo clínico nutricional

O estudo do exame clínico-nutricional é parte do Inquérito Nutricional, realizado no "Diagnóstico em Saúde do Polonoroeste-MT em 1983". No intuito de reconhecer a situação nutricional da população da região em estudo, o grupo do Inquérito Nutricional procedeu ao estudo do Consumo Alimentar das famílias, ao estudo dos dados antropométricos e de sinais clínico-nutricionais de crianças na faixa etária de 3 a 72 meses. Foram examinadas 585 crianças da amostra como proposta por SANCHES & CARVALHEIRO7 adaptado por MEIRELLES e SANCHES. O exame clínico-nutricional foi realizado segundo a metodologia recomendada por JELLIFFE4. Foram encontrados sinais clínicos sugestivos de carência nutricional em 6,6% das crianças; sinais de anemia em 9,7% e de bócio em 2,7%. Não foi possível definir com precisão outros quadros carenciais.

Waste recovery into activated carbon for water purification from heavy metals

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Química Pela Universidade Nova de Lisboa,Faculdade de Ciências e Tecn

Leishmaniose cutânea experimental. III- Aspectos histopatológicos do comportamento evolutivo da lesão cutânea produzida em Cebus apella (Primates: Cebidae) por Leishmania (Viannia) lainsoni, L. (V.) braziliensis e L. (Leishmania) amazonensis

Estudaram-se os aspectos histopatológicos relativos à evolução da infecção experimental produzida em Cebus apella (Primates: Cebidae) por Leishmania (V.) lainsoni, L. (V.) braziliensis e L. (L.) amazonensis. O exame microscópico de biópsias seqüênciais, obtidas dos animais a intervalos definidos de tempo (a primeira, às 48 ou 72 horas após a inoculação, e as seguintes, a cada 30 dias), mostrou que o desenvolvimento das lesões, independentemente da espécie de Leishmania inoculada, passa por uma seqüência de etapas a nível tecidual - 1) infiltrado inespecífico crônico; 2) nódulo macrofágico (com numerosos parasitas); 3) necrose das células parasitadas; 4) granuloma epitelióide; 5) absorção da área necrosada (às vezes formando granuloma de corpo estranho); 6) infiltrado inespecífico crônico residual); e 7) cicatrização - que representaria a formação e a resolução das lesões. Discutiram-se também os prováveis mecanismos imunopatológicos que determinam esta seqüência de eventos e sua possível semelhança com a evolução das lesões na leishmaniose tegumentar humana.