First report of Bemisia tabaci Mediterranean (Q biotype) species in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lattices from subfields of Q (xi n)

In this paper we present a method for evaluating the center density of algebraic lattices from subfields of Q(xi n), where n is a positive integer. This method allows to reproduce rotated versions of dense lattices in some dimensions. Constellations on algebraic lattices with high packing density have been proposed for use in communications in Gaussian channels and also in Rayleigh fading channels in case they have high diversity.

Q-angle static or dynamic measurements, which is the best choice for patellofemoral pain?

The elevated Q-angle seems to be one of the most suggested factors contributing to patellofemoral pain. Females with patellofemoral pain are often evaluated through static clinical tests in clinical practice. However, the adaptations seem to appear more frequently in dynamic conditions. Performing static vs. dynamic evaluations of widely used measures would add to the knowledge in this area. Therefore, the aim of this study was to determine the reliability and discriminatory capability of three Q-angle measurements: a static clinical test, peak dynamic knee valgus during stair ascent and a static measurement using a three-dimensional system. Twenty-nine females with patellofemoral pain and twenty-five pain-free females underwent clinical Q-angle measurement and static and dynamic knee valgus measurements during stair ascent, using a three-dimensional system. All measurements were obtained and comparisons between groups, reliability and discriminatory capability were calculated. Peak dynamic knee valgus was found to be greater in the patellofemoral pain group. On the other hand, no significant effects were found for static knee valgus or clinical Q-angle measurements between groups. The dynamic variable demonstrated the best discriminatory capability. Low values of reliability were found for clinical Q-angle, in contrast to the high values found for the three-dimensional system measurements. Based on our findings, avoiding or correcting dynamic knee valgus during stair ascent may be an important component of rehabilitation programs in females with patellofemoral pain who demonstrate excessive dynamic knee valgus. Q-angle static measurements were not different between groups and presented poor values of discriminatory capability.

A formalized optimum code search for q-ary trellis codes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Singularidades do tipo D(q,p)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Multi-q pattern analysis: A case study in image classification

This paper compares the effectiveness of the Tsallis entropy over the classic Boltzmann-Gibbs-Shannon entropy for general pattern recognition, and proposes a multi-q approach to improve pattern analysis using entropy. A series of experiments were carried out for the problem of classifying image patterns. Given a dataset of 40 pattern classes, the goal of our image case study is to assess how well the different entropies can be used to determine the class of a newly given image sample. Our experiments show that the Tsallis entropy using the proposed multi-q approach has great advantages over the Boltzmann-Gibbs-Shannon entropy for pattern classification, boosting image recognition rates by a factor of 3. We discuss the reasons behind this success, shedding light on the usefulness of the Tsallis entropy and the multi-q approach. (C) 2012 Elsevier B.V. All rights reserved.

Studio del pathway della Displasia Ectodermica Anidrotica (EDA)

Anhidrotic Ectodermal Dysplasia (EDA), is the most frequent form among Ectodermal Dysplasias, hereditary genetic disorders causing ectodermal appendages defective development. Indeed, EDA is characterized by defective formation of hair follicles, sweat glands and teeth both in human patients and animals. EDA, the gene mutated in Anhidrotic Ectodermal Dysplasia, encodes Ectodysplasin, a TNF family member that activates NF-kB mediated transcription. This disease can occur with mutations in other EDA-NF-kB pathway members, as EDA receptor, EDAR and its adapter, EDARADD. Moreover, mutations in TRAF6, NEMO, IKB and NF-kBs genes are responsible for Immunodeficiency associated EDA (EDA-ID). Several molecules, as SHH, WNT/DKK, BMP and LTβ, have already been reported to be EDA pathway regulators or effectors although the knowledge of the full spectrum of EDA targets remains incomplete. During the first part of the research project a gene expression analysis was performed in primary keratinocytes from Wild-type and Tabby (EDA model mouse) mice to identify novel EDA target genes. Earlier expression profiling at various developmental time points in Tabby and Wild-type mouse skin reported genes differentially expressed in the two samples and, to increase the resolution to find genes whose expression may be restricted to epidermal cells, the study was extended to primary keratinocyte cultures established from E19 Wild-type and Tabby skin. Using microarrays bearing 44,000 gene probes, we found 385 “preliminary candidate” genes whose expression was significantly affected by Eda defect. By comparing expression profiles to those from Eda-A1 (where Eda-A1 is highly expressed) transgenic skin, we restricted the list to 38 “candidate EDA targets”, 14 of which were already known to be expressed in hair follicles or epidermis. This work confirmed expression changes for 3 selected genes, Tbx1, Bmp7, and Jag1, both in primary keratinocytes and in Wild-type and Tabby whole skin, by Q-PCR and Western blotting analyses. Thus, this study detected novel candidate pathways downstream of EDA. In the second part of the research project, plasmid constructs were produced and analyzed to create a transgenic mouse model for Immunodeficiency associated EDA disease (XL-EDA-ID). In particular, plasmids containing mouse Wild-type and mutated Nemo cDNA under K-17 epidermis-specific promoter control and a Flag tag, were prepared, on the way to confine transgene expression to mice epidermis and to determine EDA phenotype without immunodeficiency for a comparison to Tabby model phenotype. EDA-ID mutations reported in patients and selected for this study are: C417R (C409R in mouse), causing Zinc Finger protein domain destabilization and A288G (A282G in mouse) affecting oligomerization of the protein. Moreover, the ex-novo mutation, ZnF, C-terminal Zinc Finger domain deletion, was tested. Thus, the constructs were analyzed by transient transfection, Western blotting and luciferase assays techniques, detecting Nemo Wild-type and mutant protein products and residue NF-kB activity in presence of mutants, after TNF stimulation. In particular, MEF_Nemo-/- cell line was used to monitor NF-kB activity without endogenous Nemo gene. Results show reduced NF-kB activity in presence of mutated Nemo forms compared to Wild-type: 81% for A282G (A288G in human); 24% for C409R (C417R in human); 15% for ZnF. C409R mutation (C417R in human), reported in 6 EDA-ID human patients, was selected to prepare transgenic model mouse. Mice (white, FVP) born following K17-promoter-Flag-Nemo_C409R plasmid region pronuclear injection, were analyzed for the transgene presence in the genotype and a preliminar examination of their phenotype was performed. In particular, one mouse showed considerable coat defects if compared to Wild-type mice. This preliminar analysis suggests a possible influence of Nemo mutant over-expression in epidermis without immunodeficiency. Still, more microscopic studies to analyze hair subtypes, Guard, Awl and Zigzag (usually alterated inTabby mouse model), Immunohistochemistry experiments to detect epidermis restricted Nemo expression and sweat glands analysis, will follow. This and other transgene positive mice will be crossed with black mice C57BL6 to obtain at least two indipendent agouti lines to analyze. Theses mice will be used in EDA target genes detection through microarrays. Following, plasmid constructs containing other Nemo mutant forms (A282G and ZnF) might be studied by the same experimental approaches to prepare more transgenic model mice to compare to Nemo_C409R and Tabby mouse models.

Bestimmung des elektrischen Formfaktors des Neutrons G en in der Reaktion 3 He (e,e'n) bei einem Impulsübertrag Q 2 =0.67 (GeV/c) 2

In der Überprüfung von Kernmodellen stellt der elektrische Formfaktor des Neutrons Gen eine wichtige Eingangsgröße dar. Im Rahmen dieser Arbeit wurde am polarisierten Elektronenstrahl des Mainzer Mikrotrons MAMI der elektrische Formfaktor des Neutrons in der Reaktion 3He(e,e'n) bestimmt. Aus dem Verhältnis der Asymmetrien respektive der Helizitätsumkehr der Elektronenpolarisation mit Targetspin senkrecht und parallel zum Impulsübertrag konnte in einer integralen Analyse Gen bestimmt werden. Zusammengefasst ergab sich Gen(Q2=0.67 (GeV/c)2) = 0.0468 +- 0.0064(stat} +- 0.0027(syst}. Um den Einfluß von Kernbindungseffekten, die z. Zt. von der Gruppe um Prof. Glöckle in Bochum theoretisch gerechnet werden, auch experimentell abzusichern, wurden parallel zur Gen-Messung die Targetasymmetrie Ay0 3He(e,e'n) und Protonenasymmetrie 3He(e,e'p) bestimmt. Die Empfindlichkeit dieser Observablen auf FSI und D-Wellenbeiträge schafft Redundanzen, aus denen auf die Eigenschaften des freien Neutrons im gebundenen System geschlossen werden kann.

Strukturen und Phasen des beta-Eukryptits sowie die Sammlung von Beugungsdaten mit axialen q-Scans

Der 'gestopfte Hochquarz' ß-Eukryptit (LiAlSiO4) ist bekannt für seine außergewöhnliche anisotrope Li-Ionenleitfähigkeit und die nahe Null liegende thermische Ausdehnung.Untersucht wurde die temperaturabhängige ß-Eukryptit-Phasenabfolge, insbesondere die modulierte Phase. Deren Satellitenreflexe sind gegenüber den normalen Reflexen erheblich verbreitert, überlappen miteinander sowie mit den dazwischen liegenden 'a-Reflexen' zu Tripletts. Für die Separation der Triplett-Intensitäten waren bisherige Standardverfahren zur Beugungsdatensammlung ungeeignet. Mit 'axialen q-Scans' wurde ein neuartiges Verfahren entwickelt. Intensitäten wurden mit dem neu-entwickelten least squares-Programm GKLS aus 2000 Profilen seriell und automatisch gewonnen und erfolgreich auf Standarddaten skaliert. Die Verwendung verbreiterter Reflexprofile erwies sich als zulässig.Die Verbreiterung wurde auf eine verminderte Fernordnung der Modulation von 11 bis 16 Perioden zurückgeführt (Analyse mit der Gitterfunktion), womit ein ungewöhnliches beugungswinkelabhängiges Verhalten der Reflexbreiten korrespondiert und mit typischen Antiphasendomänendurchmessern (andere Autoren) korreliert.Eine verminderte Si-/ Al-Ordnung wird als ursächlich für geringe Domänengrößen und Fernordnung angesehen, sowie für Eigenschaften wie z.B. a/c-Verhältnisse, Ausdehnungskoeffizienten, Ionenleitfähigkeit, Strukturtyp und Umwandlungstemperaturen. Änderungen des SiO2-Gehaltes, der Temperatur oder der Si- /Al-Ordnung zeitigen für einige Eigenschaften ähnliche Wirkungen.Die gemittelte Struktur der modulierten Phase wurde erstmals zuverlässig bestimmt, die Rolle des Li charakterisiert, Zweifel an der hexagonalen Symmetrie des ß-Eukryptits wurden ausgeräumt und die Bestimmung der modulierten Struktur wurde weitgehend vorbereitet.

Synthesis and characterization of metal-chalcogenide MQ 2-Nanoparticles (M = Mo, W, Zr; Q = S, O)

Here, we present the adaptation and optimization of (i) the solvothermal and (ii) the metal-organic chemical vapor deposition (MOCVD) approach as simple methods for the high-yield synthesis of MQ2 (M=Mo, W, Zr; Q = O, S) nanoparticles. Extensive characterization was carried out using X-ray diffraction (XRD), scanning and transmission electron micros¬copy (SEM/TEM) combined with energy dispersive X-ray analysis (EDXA), Raman spectroscopy, thermal analyses (DTA/TG), small angle X-ray scattering (SAXS) and BET measurements. After a general introduction to the state of the art, a simple route to nanostructured MoS2 based on the decomposition of the cluster-based precursor (NH4)2Mo3S13∙xH2O under solvothermal conditions (toluene, 653 K) is presented. Solvothermal decomposition results in nanostructured material that is distinct from the material obtained by decomposition of the same precursor in sealed quartz tubes at the same temperature. When carried out in the presence of the surfactant cetyltrimethyl¬ammonium bromide (CTAB), the decomposition product exhibits highly disordered MoS2 lamellae with high surface areas. The synthesis of WS2 onion-like nanoparticles by means of a single-step MOCVD process is discussed. Furthermore, the results of the successful transfer of the two-step MO¬CVD based synthesis of MoQ2 nanoparticles (Q = S, Se), comprising the formation of amorphous precursor particles and followed by the formation of fullerene-like particles in a subsequent annealing step to the W-S system, are presented. Based on a study of the temperature dependence of the reactions a set of conditions for the formation of onion-like structures in a one-step reaction could be derived. The MOCVD approach allows a selective synthesis of open and filled fullerene-like chalcogenide nanoparticles. An in situ heating stage transmission electron microscopy (TEM) study was employed to comparatively investigate the growth mechanism of MoS2 and WS2 nanoparticles obtained from MOCVD upon annealing. Round, mainly amorphous particles in the pristine sample trans¬form to hollow onion-like particles upon annealing. A significant difference between both compounds could be demonstrated in their crystallization conduct. Finally, the results of the in situ hea¬ting experiments are compared to those obtained from an ex situ annealing process under Ar. Eventually, a low temperature synthesis of monodisperse ZrO2 nanoparticles with diameters of ~ 8 nm is introduced. Whereas the solvent could be omitted, the synthesis in an autoclave is crucial for gaining nano-sized (n) ZrO2 by thermal decomposition of Zr(C2O4)2. The n-ZrO2 particles exhibits high specific surface areas (up to 385 m2/g) which make them promising candidates as catalysts and catalyst supports. Co-existence of m- and t-ZrO2 nano-particles of 6-9 nm in diameter, i.e. above the critical particle size of 6 nm, demonstrates that the particle size is not the only factor for stabilization of the t-ZrO2 modification at room temperature. In conclusion, synthesis within an autoclave (with and without solvent) and the MOCVD process could be successfully adapted to the synthesis of MoS2, WS2 and ZrO2 nanoparticles. A comparative in situ heating stage TEM study elucidated the growth mechanism of MoS2 and WS2 fullerene-like particles. As the general processes are similar, a transfer of this synthesis approach to other layered transition metal chalcogenide systems is to be expected. Application of the obtained nanomaterials as lubricants (MoS2, WS2) or as dental filling materials (ZrO2) is currently under investigation.