Evaluation of seven European aerosol optical depth retrieval algorithms for climate analysis

Satellite data are increasingly used to provide observation-based estimates of the effects of aerosols on climate. The Aerosol-cci project, part of the European Space Agency's Climate Change Initiative (CCI), was designed to provide essential climate variables for aerosols from satellite data. Eight algorithms, developed for the retrieval of aerosol properties using data from AATSR (4), MERIS (3) and POLDER, were evaluated to determine their suitability for climate studies. The primary result from each of these algorithms is the aerosol optical depth (AOD) at several wavelengths, together with the Ångström exponent (AE) which describes the spectral variation of the AOD for a given wavelength pair. Other aerosol parameters which are possibly retrieved from satellite observations are not considered in this paper. The AOD and AE (AE only for Level 2) were evaluated against independent collocated observations from the ground-based AERONET sun photometer network and against “reference” satellite data provided by MODIS and MISR. Tools used for the evaluation were developed for daily products as produced by the retrieval with a spatial resolution of 10 × 10 km2 (Level 2) and daily or monthly aggregates (Level 3). These tools include statistics for L2 and L3 products compared with AERONET, as well as scoring based on spatial and temporal correlations. In this paper we describe their use in a round robin (RR) evaluation of four months of data, one month for each season in 2008. The amount of data was restricted to only four months because of the large effort made to improve the algorithms, and to evaluate the improvement and current status, before larger data sets will be processed. Evaluation criteria are discussed. Results presented show the current status of the European aerosol algorithms in comparison to both AERONET and MODIS and MISR data. The comparison leads to a preliminary conclusion that the scores are similar, including those for the references, but the coverage of AATSR needs to be enhanced and further improvements are possible for most algorithms. None of the algorithms, including the references, outperforms all others everywhere. AATSR data can be used for the retrieval of AOD and AE over land and ocean. PARASOL and one of the MERIS algorithms have been evaluated over ocean only and both algorithms provide good results.

Language learning in the public eye: an analysis of newspapers and official documents in England

This article considers the issue of low levels of motivation for foreign language learning in England by exploring how language learning is conceptualised by different key voices in that country through the examination of written data: policy documents and reports on the UK's language needs, curriculum documents, and press articles. The extent to which this conceptualisation has changed over time is explored, through the consideration of documents from two time points, before and after a change in government in the UK. The study uses corpus analysis methods in this exploration. The picture that emerges is a complex one regarding how the 'problems' and 'solutions' surrounding language learning in that context are presented in public discourse. This, we conclude, has implications for the likely success of measures adopted to increase language learning uptake in that context.

Model predictions of the occurrence of non-Maxwellian plasmas, and analysis of their effects on EISCAT data

The recent identification of non-thermal plasmas using EISCAT data has been made possible by their occurrence during large, short-lived flow bursts. For steady, yet rapid, ion convection the only available signature is the shape of the spectrum, which is unreliable because it is open to distortion by noise and sampling uncertainty and can be mimicked by other phenomena. Nevertheless, spectral shape does give an indication of the presence of non-thermal plasma, and the characteristic shape has been observed for long periods (of the order of an hour or more) in some experiments. To evaluate this type of event properly one needs to compare it to what would be expected theoretically. Predictions have been made using the coupled thermosphere-ionosphere model developed at University College London and the University of Sheffield to show where and when non-Maxwellian plasmas would be expected in the auroral zone. Geometrical and other factors then govern whether these are detectable by radar. The results are applicable to any incoherent scatter radar in this area, but the work presented here concentrates on predictions with regard to experiments on the EISCAT facility.

Global networks, cities and economic performance: Observations from an analysis of cities in Europe and the USA

The network paradigm has been highly influential in spatial analysis in the globalisation era. As economies across the world have become increasingly integrated, so-called global cities have come to play a growing role as central nodes in the networked global economy. The idea that a city’s position in global networks benefits its economic performance has resulted in a competitive policy focus on promoting the economic growth of cities by improving their network connectivity. However, in spite of the attention being given to boosting city connectivity little is known about whether this directly translates to improved city economic performance and, if so, how well connected a city needs to be in order to benefit from this. In this paper we test the relationship between network connectivity and economic performance between 2000 and 2008 for cities with over 500,000 inhabitants in Europe and the USA to inform European policy.

Seafood safety and quality: an analysis of the supply chain in the Sultanate of Oman

The globalization of trade in fish has created many challenges for the developing world specifically with regard to food safety and quality. International organisations have established a good basis for standards in international trade. Whilst these requirements are frequently embraced by the major importers (such as Japan, the EU and the USA), they often impose additional safety requirements and regularly identify batches which fail to meet their strict standards. Creating an effective national seafood control system which meets both the internal national needs as well the requirements for the export market can be challenging. Many countries adopt a dual system where seafood products for the major export markets are subject to tight control whilst the majority of the products (whether for the local market or for more regional trade) are less tightly controlled. With regional liberalization also occurring, deciding on appropriate controls is complex. In the Sultanate of Oman, fisheries production is one of the countries' chief sources of economic revenue after oil production and is a major source of the national food supply. In this paper the structure of the fish supply chain has been analysed and highlighted the different routes operating for the different markets. Although much of the fish are consumed within Oman, there is a major export trade to the local regional markets. Much smaller quantities meet the more stringent standards imposed by the major importing countries and exports to these are limited. The paper has considered the development of the Omani fish control system including the key legislative documents and the administrative structures that have been developed. Establishing modern controls which satisfy the demands of the major importers is possible but places additional costs on businesses. Enhanced controls such as HACCP and other management standards are required but can be difficult to justify when alternative markets do not specify these. These enhanced controls do however provide additional consumer protection and can bring benefits to local consumers. The Omani government is attempting to upgrade the system of controls and has made tremendous progress toward the implementation of HACCP and introducing enhanced management systems into its industrial sector. The existence of strengthened legislative and government support, including subsidies, has encouraged some businesses to implement HACCP. The current control systems have been reviewed and a SWOT analysis approach used to identify key factors for their future development. The study shows that seafood products in the supply chain are often exposed to lengthy handling and distribution process before reaching the consumers, a typical issue faced by many developing countries. As seafood products are often perishable, they safety is compromised if not adequately controlled. The enforcement of current food safety laws in the Sultanate of Oman is shared across various government agencies. Consequently, there is a need to harmonize all regulatory requirements, enhancing the domestic food protection and to continue to work towards a fully risk-based approach in order to compete successfully in the global market.

Dual semiosis analysis model managing customer-focused service innovation

Customers will not continue to pay for a service if it is perceived to be of poor quality, and/or of no value. With a paradigm shift towards business dependence on service orientated IS solutions [1], it is critical that alignment exists between service definition, delivery, and customer expectation, businesses are to ensure customer satisfaction. Services, and micro-service development, offer businesses a flexible structure for solution innovation, however, constant changes in technology, business and societal expectations means an iterative analysis solution is required to i) determine whether provider services adequately meet customer segment needs and expectations, and ii) to help guide business service innovation and development. In this paper, by incorporating multiple models, we propose a series of steps to help identify and prioritise service gaps. Moreover, the authors propose the Dual Semiosis Analysis Model, i.e. a tool that highlights where within the symbiotic customer / provider semiosis process, requirements misinterpretation, and/or service provision deficiencies occur. This paper offers the reader a powerful customer-centric tool, designed to help business managers highlight both what services are critical to customer quality perception, and where future innovation

A psychometric analysis of reliability and validity of the index of learning styles (ILS)

Prior literature showed that Felder and Silverman learning styles model (FSLSM) was widely adopted to cater to individual styles of learners whether in traditional or Technology Enhanced Learning (TEL). In order to infer this model, the Index of Learning Styles (ILS) instrument was proposed. This research aims to analyse the soundness of this instrument in an Arabic sample. Data were integrated from different courses and years. A total of 259 engineering students participated voluntarily in the study. The reliability was analysed by applying internal construct reliability, inter-scale correlation, and total item correlation. The construct validity was also considered by running factor analysis. The overall results indicated that the reliability and validity of perception and input dimensions were moderately supported, whereas processing and understanding dimensions showed low internal-construct consistency and their items were weakly loaded in the associated constructs. Generally, the instrument needs further effort to improve its soundness. However, considering the consistency of the produced results of engineering students irrespective of cross-cultural differences, it can be adopted to diagnose learning styles.

Aligning IS programs with industry: linking business analysis curricula design with the professional body

Aligning information systems (IS) solutions with business goals and needs are crucial for IS activities. IS professionals who are able to work closely with both the business and technical staff are key enablers of business and IT alignment. IS programs in higher education (HE) institutions have a long tradition of enabling graduates to develop the appropriate skills needed for their future careers. Yet, organizations are still having difficulty finding graduates who possess both the knowledge and skills that are best suited to their specific requirements. Prior studies suggest that IS curricula are often ill-matched with industry/business needs. This study reports on the business analysis curricula (re) design which was undertaken to align it with a key professional body for the IS industry. This study presents the approaches taken in the (re) design of the module, and provides a discussion of the wider implications for IS curricula design. The results show a positive outcome for the HE and professional body partnership.

Improved Road Design for Future Maintenance - Analysis of Road Barrier Repair Costs

The cost of a road construction over its service life is a function of the design, quality of construction, maintenance strategies and maintenance operations. Unfortunately, designers often neglect a very important aspect which is the possibility to perform future maintenance activities. The focus is mainly on other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This licentiate thesis is a part of a Ph.D. project entitled “Road Design for lower maintenance costs” that aims to examine how the life-cycle costs can be optimized by selection of appropriate geometrical designs for the roads and their components. The result is expected to give a basis for a new method used in the road planning and design process using life-cycle cost analysis with particular emphasis on road maintenance. The project started with a review of literature with the intention to study conditions causing increased needs for road maintenance, the efforts made by the road authorities to satisfy those needs and the improvement potential by consideration of maintenance aspects during planning and design. An investigation was carried out to identify the problems which obstruct due consideration of maintenance aspects during the road planning and design process. This investigation focused mainly on the road planning and design process at the Swedish Road Administration. However, the road planning and design process in Denmark, Finland and Norway were also roughly evaluated to gain a broader knowledge about the research subject. The investigation was carried out in two phases: data collection and data analysis. Data was collected by semi-structured interviews with expert actors involved in planning, design and maintenance and by a review of design-related documents. Data analyses were carried out using a method called “Change Analysis”. This investigation revealed a complex combination of problems which result in inadequate consideration of maintenance aspects. Several urgent needs for changes to eliminate these problems were identified. Another study was carried out to develop a model for calculation of the repair costs for damages of different road barrier types and to analyse how factors such as road type, speed limits, barrier types, barrier placement, type of road section, alignment and seasonal effects affect the barrier damages and the associated repair costs. This study was carried out using a method called the “Case Study Research Method”. Data was collected from 1087 barrier repairs in two regional offices of the Swedish Road Administration, the Central Region and the Western Region. A table was established for both regions containing the repair cost per vehicle kilometre for different combinations of barrier types, road types and speed limits. This table can be used by the designers in the calculation of the life-cycle costs for different road barrier types.

Who Should do What to Whom? : Occupational Groups´Views on Special Needs

The overall aim of this thesis is to increase our knowledge of different occupational groups´ views on work with children in need of special support. This is explored in four separate studies. The first study investigates the views of occupational groups in preschools and schools in one municipality. A questionnaire was handed out to all personnel (N=1297) in the municipality in 2008 (72.5 % response rate). The second study explores the views of educational leaders (N=45) in the same municipality. Questionnaire # 2 was distributed in 2009. All the educational leaders responded to the questionnaire. The third study describes the views of different occupational groups concerning special educational needs coordinators´ (SENCOs) role and work. This was highlighted by comparing responses from questionnaire #1 and # 2. Responses concerning SENCOs´ work were also added using a third questionnaire. This questionnaire was handed out in 2006 to chief education officers (N=290) in all municipalities in Sweden. The response rate was 90.3%. Finally, the fourth study presents five head teachers´ descriptions of their work with special needs issues. Study four was a follow-up study of questionnaire # 2. These head teachers were selected because of their inclusive values and because they seemed to be effective according to certain criteria. They were interviewed in January 2012. The results reveal a number of interesting findings. For example, there are both similar and different views among the occupational groups concerning work with children in need of special support. A majority of the respondents in all groups state that children´s individual deficiencies is one common reason why children need special support in preschools/schools. Differences between the occupational groups become especially visible regarding their views of SENCOs‟ work. Critical pragmatism (Cherryholmes, 1988) is applied as a theoretical point of departure. Skrtic´s (1991) critical reading and analysis of special education relative to general education is specifically used to interpret and discuss the outcome of the studies. Additionally, Abbott´s (1988) reasoning concerning the “division of expert labor” is used to discuss the occupational groups´ replies concerning “who should do what to whom”. The findings in the studies are contextualized and theoretically interpreted in the separate articles. However in the first part of this thesis (in Swedish: Kappa), the theoretical interpretations of the empirical outcome are discussed in more detail and the results are further contextualized and synthesised. Inclusion and premises for inclusive education are also discussed in more depth in the first part of the present thesis.

Pregnant Adolescents in Vietnam : Social context and health care needs

Background: The number of childbearing adolescents in Vietnam is relatively low but they are more prone to experience adverse outcome than adult women. Reports of increasing rates of abortion and prevalence of STIs including HIV among youth indicate a need to improve services and counselling for these groups. Midwives are key persons in the promotion of young people’s sexual and reproductive health in Vietnam. Aim: The overall aim of this thesis is to describe the prevalence and outcome of adolescent pregnancies in Vietnam (I), to explore the social context and health care seeking behavior of pregnant adolescents (II), as well as to explore the perspectives of health care providers and midwifery students regarding adolescent sexuality and reproductive health service needs (III, IV). Methods: The studies were conducted from 2002 to 2005, combining qualitative and quantitative research methods. A population based prospective survey was used to estimate rates and outcomes of adolescent pregnancies (I). Pregnant and newly delivered adolescents’ experiences of childbearing and their encounters with health care providers were studied using qualitative interviews (II). Health care providers’ perspective on adolescent sexual and reproductive health (ASRH) and views on how to improve the quality of abortion care was explored in focus group discussions (FGD). The values and attitudes of midwifery students about ASRH were investigated using questionnaires and interviews (IV). Descriptive statistics was used to analyse quantitative data (I, IV) and content analysis were applied for qualitative data (II, III, and IV). Findings: Adolescent birth rate was similar to previously reported in Vietnam but lower when compared to other Asian countries. The incidence of stillborn among adolescents was higher than for women in higher reproductive ages. The proportion of preterm deliveries was 20 % of all births, higher than previous findings from Vietnam. About 2 % of the deliveries were home deliveries, more common among women with low education, belonging to ethnic minority and/or living in mountainous areas (I). Ambivalence facing motherhood, pride and happiness but also worries and lack of self-confidence emerged as themes from the interviews; and experience of ‘being in the hands of others’ in a positive, caring sense but also in a sense of subordination in relation to husband, family and health care providers (II). Health care providers at abortion clinics and midwifery students generally disapproved of pre-marital sex, but had a pragmatic view on the need for contraceptive services and counselling to reduce the burden of unwanted pregnancies and abortions for young women. Providers and midwifery students expressed a need for training on ASRH issues (III, IV). Conclusion: Cultural norms and gender inequity make pregnant adolescent women in Vietnam vulnerable to sexual and reproductive health risks. Health care providers experience ethical dilemmas while counselling unmarried adolescents who come for abortion and this has a negative impact on the quality of care. Integrated ASRH in education and training programmes for health care providers, including midwives, as well as continued in-service training on these issues are suggested to improve reproductive health care services in Vietnam.

Shared decision-making in mental health care : a user perspective on decisional needs in community-based services

BACKGROUND: Shared decision-making (SDM) is an emergent research topic in the field of mental health care and is considered to be a central component of a recovery-oriented system. Despite the evidence suggesting the benefits of this change in the power relationship between users and practitioners, the method has not been widely implemented in clinical practice. OBJECTIVE: The objective of this study was to investigate decisional and information needs among users with mental illness as a prerequisite for the development of a decision support tool aimed at supporting SDM in community-based mental health services in Sweden. METHODS: Three semi-structured focus group interviews were conducted with 22 adult users with mental illness. The transcribed interviews were analyzed using a directed content analysis. This method was used to develop an in-depth understanding of the decisional process as well as to validate and conceptually extend Elwyn et al.'s model of SDM. RESULTS: The model Elwyn et al. have created for SDM in somatic care fits well for mental health services, both in terms of process and content. However, the results also suggest an extension of the model because decisions related to mental illness are often complex and involve a number of life domains. Issues related to social context and individual recovery point to the need for a preparation phase focused on establishing cooperation and mutual understanding as well as a clear follow-up phase that allows for feedback and adjustments to the decision-making process. CONCLUSIONS AND IMPLICATIONS FOR PRACTICE: The current study contributes to a deeper understanding of decisional and information needs among users of community-based mental health services that may reduce barriers to participation in decision-making. The results also shed light on attitudinal, relationship-based, and cognitive factors that are important to consider in adapting SDM in the mental health system.

Parenthood in transition : Somali-born parents' experiences of and needs for parenting support programmes

BACKGROUND: Pre- and post-migration trauma due to forced migration may impact negatively on parents' ability to care for their children. Little qualitative work has examined Somali-born refugees' experiences. The aim of this study is to explore Somali-born refugees' experiences and challenges of being parents in Sweden, and the support they need in their parenting. METHODS: A qualitative descriptive study was undertaken. Data were collected from four focus group discussions (FGDs) among 23 Somali-born mothers and fathers living in a county in central Sweden. Qualitative content analysis has been applied. RESULTS: A main category, Parenthood in Transition, emerged as a description of a process of parenthood in transition. Two generic categories were identified: Challenges, and Improved parenting. Challenges emerged from leaving the home country and being new and feeling alienated in the new country. In Improved parenting, an awareness of opportunities in the new country and ways to improve their parenting was described, which includes how to improve their communication and relationship with their children. The parents described a need for information on how to culturally adapt their parenting and obtain support from the authorities. CONCLUSIONS: Parents experienced a process of parenthood in transition. They were looking to the future and for ways to improve their parenting. Schools and social services can overcome barriers that prevent lack of knowledge about the new country's systems related to parenthood. Leaving the home country often means separation from the family and losing the social network. We suggest that staff in schools and social services offer parent training classes for these parents throughout their children's childhood, with benefits for the child and family.

Revising the critical care family needs inventory for the emergency department

Background: The Critical Care Family Needs Inventory (CCFNI) has been used widely over the last two decades for analysing the needs of family members in the intensive care unit. However, it has significant limitations as a needs assessment tool for use with families in the Emergency Department (ED). This paper discusses the methodological challenges encountered during the process of reviewing and adapting this tool for use in the ED. Aims: The purpose of this study was to revise and adapt the CCFNI for use with a population of family members of critically ill patients in an Australian Emergency Department. Instrument: The process of tool revision, adaptation and reconstruction included: critique of the CCFNI; concept definition; item review; content and structure revision; scale revision; and testing with a sample of the target population. Methods: Data collection methods were aimed at accessing a vulnerable population, while enhancing response rate and data quality. A sample of 84 relatives of critically ill patients from one Melbourne Metropolitan Emergency Department was used, 73% of whom returned questionnaires. Results: Pilot data were examined with the specific purpose of identifying elements of the tool that required refinement or modification. Methods used for establishing reliability and validity of the revised tool provided satisfactory results. Limitations: Limitations of this study include inadequate sample size for exploratory factor analysis, and an incomplete response set for some items, which influenced item analysis. Conclusion: The process used for addressing the identified methodological issues in reviewing and adapting the CCFNI for use in the ED provides a framework for adapting an established tool for a specific purpose.

Applying domain analysis to the investigation of web-enabled human resource projects

Designing a successful web project requires understanding not only of its owner's business and technological needs, as well as having the substantial management and development experience, but it also depends on a thorough knowledge of the system's application domain and of other existing systems in the domain. In order to gather such domain knowledge, it is necessary to identify the nature of the proposed web services venture with regards to other similar services offered in the domain, the business setting of enterprises that initiate such ventures, the various types of customers involved, and how these factors translate into requirements. In this paper, we present an approach to studying the domain of web-enabled Human Resource and payroll services with the aim of attaining design knowledge that would ensure customer satisfaction and could eventually pave the way to the successful implementation of web-enabled services.