Texas electronics waste management: A policy analysis for the 21st century

Electronic waste is a fairly new and largely unknown phenomenon. Accordingly, governments have only recently acknowledged electronic waste as a threat to the environment and public health. In attempting to mitigate the hazards associated with this rapidly growing toxic waste stream, governments at all levels have started to implement e-waste management programs. The legislation enacted to create these programs is based on extended producer responsibility or EPR policy. ^ EPR shifts the burden of final disposal of e-waste from the consumer or municipal solid waste system to the manufacturer of electronic equipment. Applying an EPR policy is intended to send signals up the production chain to the manufacturer. The desired outcome is to change the methods of production in order to reduce production outputs/inputs with the ultimate goal of changing product design. This thesis performs a policy analysis of the current e-waste policies at the federal and state level of government, focusing specifically on Texas e-waste policies. ^ The Texas e-waste law known, as HB 2714 or the Texas Computer TakeBack Law, requires manufacturers to provide individual consumers with a free and convenient method for returning their used computers to manufacturers. The law is based on individual producer responsibility and shared responsibility among consumer, retailers, recyclers, and the TCEQ. ^ Using a set of evaluation criteria created by the Organization for Economic Co-operation and Development, the Texas e-waste law was examined to determine its effectiveness at reducing the threat of e-waste in Texas. Based on the outcomes of the analysis certain recommendations were made for the legislature to incorporate into HB 2714. ^ The results of the policy analysis show that HB 2714 is a poorly constructed law and does not provide the desired results seen in other states with EPR policies. The TakeBack Law does little to change the collection methods of manufacturers and even less to change their production habits. If the e-waste problem is to be taken seriously, HB 2714 must be amended to reflect the proposed changes in this thesis.^

Políticas territoriales y construcción del paisaje cultural : caso región Gran La Plata

El propósito es presentar las principales estrategias de ordenamiento territorial urbano puestas en práctica en los últimos quince años en el Gran La Plata, que han incidido en el paisaje cultural. Se observan tanto políticas de enfoques integrales como sectoriales, las que incorporan innovaciones en OT y proponen nuevos y/o renovados paisajes culturales y las políticas “centrales" desde las gestiones municipales. Se reflexiona sobre aportes y debilidades, incompatibilidades entre ellas, en el marco del desarrollo sustentable. La estrategia metodológica utilizada tiene un perfil cualitativo y de tipo exploratoria, con un diseño de naturaleza flexible. En el estudio de caso se identifican las modalidades de intervención en función de las transformaciones del paisaje resultante y su gestión. Tiene una fuerte orientación interpretativa y la estrategia general está orientada a conseguir una familiarización con hechos aun no suficientemente comprendidos para generar nuevas ideas que permitan realizar nuevas preguntas e hipótesis. En este marco, las políticas se tornan contradictorias, si bien han logrado modificar algunos microespacios. Se entienden más como el recorte y congelamiento/ restauración del paisaje previo que como la creación de otros renovados, nuevos y/o mejores y con valores sociales aggiornados. En lo ambiental, no han sido acompañadas por estrategias estructurantes como el arbolado urbano y disposición de los residuos sólidos urbanos.

Use of alternative fuels obtained from renewable sources in brayton cycles

Analysis and simulation of the behaviour of gas turbines for power generation using different nonconventional fuels obtained from different renewable sources are presented. Three biomass-tobiofuel processes are considered: anaerobic digestion of biomass (biogas), biomass gasification (synthesis gas) and alcoholic fermentation of biomass and dehydration (bioethanol), each of them with two different biomass substrates (energy crops and municipal solid waste) as input. The gas turbine behaviour in a Brayton cycle is simulated both in an isolated operation and in combined cycle. The differences in gas turbine performance when fired with the considered biofuels compared to natural gas are studied from different points of view related with the current complex energetic context: energetic and exergetic efficiency of the simple/combined cycle and CO2 emissions. Two different tools have been used for the simulations, each one with a different approach: while PATITUG (own software) analyses the behaviour of a generic gas turbine allowing a total variability of parameters, GT-PRO (commercial software) is more rigid, albeit more precise in the prediction of real gas turbine behaviour. Different potentially interesting configurations and its thermodynamic parameters have been simulated in order to obtain the optimal range for all of them and its variation for each fuel.

Use of alternative fuels obtained from renowable sources in Brayton cycles

Analysis and simulation of the behaviour of gas turbines for power generation using different nonconventional fuels obtained from different renewable sources are presented. Three biomass-tobiofuel processes are considered: anaerobic digestion of biomass (biogas), biomass gasification (synthesis gas) and alcoholic fermentation of biomass and dehydration (bioethanol), each of them with two different biomass substrates (energy crops and municipal solid waste) as input. The gas turbine behaviour in a Brayton cycle is simulated both in an isolated operation and in combined cycle. The differences in gas turbine performance when fired with the considered biofuels compared to natural gas are studied from different points of view related with the current complex energetic context: energetic and exergetic efficiency of the simple/combined cycle and CO2 emissions. Two different tools have been used for the simulations, each one with a different approach: while PATITUG (own software) analyses the behaviour of a generic gas turbine allowing a total variability of parameters, GT-PRO (commercial software) is more rigid, albeit more precise in the prediction of real gas turbine behaviour. Different potentially interesting configurations and its thermodynamic parameters have been simulated in order to obtain the optimal range for all of them and its variation for each fuel.

Carbon dioxide emissions from semi-arid soils amended with biochar alone or combined with mineral and organic fertilizers

Semi-arid soils cover a significant area of Earth s land surface and typically contain large amounts of inorganic C. Determining the effects of biochar additions on CO2 emissions fromsemi-arid soils is therefore essential for evaluating the potential of biochar as a climate change mitigation strategy. Here, we measured the CO2 that evolved from semi-arid calcareous soils amended with biochar at rates of 0 and 20 t ha?1 in a full factorial combination with three different fertilizers (mineral fertilizer, municipal solid waste compost, and sewage sludge) applied at four rates (equivalent to 0, 75, 150, and 225 kg potentially available N ha?1) during 182 days of aerobic incubation. A double exponential model, which describes cumulative CO2 emissions from two active soil C compartments with different turnover rates (one relatively stable and the other more labile), was found to fit verywell all the experimental datasets. In general, the organic fertilizers increased the size and decomposition rate of the stable and labile soil C pools. In contrast, biochar addition had no effects on any of the double exponential model parameters and did not interact with the effects ascribed to the type and rate of fertilizer. After 182 days of incubation, soil organic and microbial biomass C contents tended to increase with increasing the application rates of organic fertilizer, especially of compost, whereas increasing the rate of mineral fertilizer tended to suppress microbial biomass. Biochar was found to increase both organic and inorganic C contents in soil and not to interactwith the effects of type and rate of fertilizer on C fractions. As a whole, our results suggest that the use of biochar as enhancer of semi-arid soils, either alone or combined with mineral and organic fertilizers, is unlikely to increase abiotic and biotic soil CO2 emissions.

Sostenibilidad en el sector de la construcción. Sostenibilidad en estructuras y puentes ferroviarios

La escasez de recursos, el cambio climático, la pobreza y el subdesarrollo, los desastres naturales, son solo algunos de los grandes retos a que se enfrenta la humanidad y a los que la economía verde y el desarrollo sostenible tienen que dar respuesta. El concepto sostenible surge a raíz de la necesidad de lograr en todas las actividades humanas un nuevo equilibrio con el medioambiente, la sociedad y la economía, es decir un desarrollo más sostenible. La construcción supone en este nuevo concepto un sector básico, con grandes impactos en los recursos, los residuos, las emisiones, la biodiversidad, el paisaje, las necesidades sociales, la integración, el desarrollo económico del entorno, etc. Es por ello, que la construcción sostenible tiene una importancia esencial como demuestra su amplia aplicación teórica y práctica ya en proyectos de planificación urbana y de edificación. En la ingeniería civil estas aproximaciones son todavía mínimas, aunque ya se están considerando ciertos criterios de sostenibilidad en proyectos de construcción. La construcción consume muchos recursos naturales, económicos y tiene gran incidencia social. En la actualidad su actividad consume un 30% de los recursos extraídos de la tierra y la energía, y en consecuencia genera el 30% de los gases de efecto invernadero y residuos sólidos del mundo (EEA, 2014). Este impacto debería suponer una gran responsabilidad para los profesionales y gobiernos que toman cada día las decisiones de diseño e inversión en la construcción, y su máxima eficiencia debería estar muy presente entre los objetivos. En esta tesis doctoral se plantea un nuevo modelo para la evaluación de la sostenibilidad en los proyectos mediante un sistema de indicadores, basados en las áreas de estudio de las certificaciones de sostenibilidad existentes y en un análisis multi-criterio de cada uno de los axiomas de la sostenibilidad. Como reto principal se marca la propuesta de una metodología que permita identificar, priorizar y seleccionar los indicadores y las variables más importantes de lo que es considerado como una construcción sostenible en el caso de infraestructuras ferroviarias, más concretamente en puentes ferroviarios, y que además sirva para priorizar nuevos proyectos que se adapten a los nuevos objetivos del desarrollo sostenible: el respeto al medioambiente, la integración social y la económica. El objetivo es la aplicación de estos indicadores desde las etapas más tempranas del proyecto: planificación, diseño de alternativas y selección de alternativas. Para ello, en primer lugar, se ha realizado un análisis en profundidad de los distintas organizaciones de certificación de la sostenibilidad mundiales y se ha desarrollado una comparativa entre ellas, detallando el funcionamiento de las más extendidas (BREEAM, LEED, VERDE, DGNB). Tras esto, se ha analizado la herramienta matemática MIVES de análisis multi-criterio para su aplicación, en la tesis, a las infraestructuras ferroviarias. En la segunda parte se desarrolla para las estructuras ferroviarias un nuevo modelo de indicadores, un sistema de ayuda a la decisión multi-criterio basado en los tres axiomas de las sostenibilidad (sociedad, medioambiente y economía), articulados en un árbol de requerimientos inspirado en el método MIVES, que propone una metodología para el caso de las infraestructuras ferroviarias. La metodología MIVES estructura el proceso de decisión en tres ramas: Requisitos, componentes y ciclo de vida. Estas ramas definen los límites de los sistemas. El eje de los requisitos del árbol de los requisitos o se estructura en tres niveles que corresponden al requisito específico: criterios e indicadores. Además, es necesario definen la función del valor para cada indicador, definen el peso de importancia de cada elemento del árbol y finalmente con el calcular el valor de cada alternativa selecciona el mejor de él. La generación de este árbol de requerimientos en estructuras ferroviarias y la medición de los parámetro es original para este tipo de estructuras. Por último, tras el desarrollo de la metodología, se ha aplicado la propuesta metodológica mediante la implementación práctica, utilizando el método propuesto con 2 puentes ferroviarios existentes. Los resultados han mostrado que la herramienta es capaz de establecer una ordenación de las actuaciones coherente y suficientemente discriminante como para que el decisor no tenga dudas cuando deba tomar la decisión. Esta fase, es una de las grandes aportaciones de la tesis, ya que permite diferenciar los pesos obtenidos en cada una de las áreas de estudio y donde la toma de decisión puede variar dependiendo de las necesidades del decisor, la ubicación del puente de estudio etc. ABSTRACT Scarce resources, climate change, poverty and underdevelopment, natural disasters are just some of the great challenges facing humanity and to which the green economy will have to respond. The sustainable concept arises from the need for all human activities in a new equilibrium with the environment, society and the economy, which is known as sustainable development. The construction industry is part of this concept, because of its major impacts on resources, waste, emissions, biodiversity, landscape, social needs, integration, economical development, environment, etc. Therefore, sustainable construction has a critical importance as already demonstrated by its wide application and theoretical practice in urban planning and building projects. In civil engineering, these approaches are still minimal, although some criteria are already taken into account for sustainability in infrastructure projects. The construction industry requires a lot of natural resources, has a real economic relevance and a huge social impact. Currently, it consumes 40% of produced power as well as natural resources extracted from the earth and thus leads to an environmental impact of 40% regarding greenhouse gas emissions and solid wastes (EEA 2014). These repercussions should highly concern our governments and professional of this industry on the decisions they take regarding investments and designs. They must be inflexible in order to ensure that the main concern has to be a maximum efficiency. Major events like the COP21 held in Paris in December 2015 are a concrete signal of the worldwide awareness of the huge impact of each industry on climate. In this doctoral thesis a new model for the evaluation of the sustainability in the projects by means of a system of indicators, based on the areas of study of the existing certifications of sustainability and on an analysis considers multi-criterion of each one of the axioms of the sustainability. The primary aim of this thesis is to study the mode of application of sustainability in projects through a system of indicators. . The main challenge consists of create a methodology suitable to identify, prioritize and select the most important indicators which define if a building is sustainable in the specific case of railway infrastructures. The methodology will help to adapt future projects to the new goals of sustainable development which are respect of nature, social integration and economic relevance. A crucial point is the consideration of these indicators from the very beginning steps of the projects: planning, design and alternatives reflections. First of all, a complete inventory of all world energy certification organizations has been made in order to compare the most representative ones regarding their way of functioning (BREEAM, LEED, VERDE, DGNB). After this, mathematical tool MIVES of analysis has been analyzed multi-criterion for its application, in the thesis, to railway infrastructures. The second part of the thesis is aimed to develop a new model of indicators, inspired by the MIVES method, consisting in a decision-making system based on the 3 foundations of sustainability: nature impact, social concerns, and economic relevance. The methodology MIVES structures the decision process in three axes: Requirements, components and life cycle. These axes define the boundaries of the systems. The axis of requirements o tree requirements is structured in three levels corresponding to specific requirement: criteria and indicators. In addition, is necessary define the value function for each indicator, define the weight of importance of each element of the tree and finally with the calculate the value of each alternative select the best of them. The generation of this tree requirements in railway structures and measuring the parameter is original for this type of structures. Finally, after the development of the methodology, it has validated the methodology through practical implementation, applying the proposed method 2 existing railway bridges. The results showed that the tool is able to establish a coherent management of performances and discriminating enough so that the decision maker should not have doubts when making the decision. This phase, is one of the great contributions of the thesis, since it allows to differentiate the weights obtained in each one from the study areas and where the decision making can vary depending on the necessities of the decisor, the location of the bridge of study etc.

Gerenciamento de resíduos sólidos municipais e os sistemas complexos: a busca da sustentabilidade e a proposta de cobrança da coleta em Santo André-SP

O gerenciamento de resíduos sólidos municipais não vem contemplando adequadamente a multidimensionalidade da realidade urbana num mundo globalizado e pouco tem auxiliado na necessária transformação dos padrões de consumo nas comunidades locais. Face a incerteza inerente dos sistemas sociais, a complexidade vem sendo, progressivamente, reconhecida como a expressão paradigmática dessa realidade. Neste trabalho, desenvolve-se o conceito de sistema de resíduos sólidos sob a perspectiva de um sistema complexo, assim como caracteriza-se a dinâmica das suas interações. A partir dessa concepção teórica, discute-se a busca da sustentabilidade por meio do gerenciamento de resíduos e as formas de complexificar a sua metodologia de atuação, na qual a cobrança da coleta de resíduos domiciliares é identificada como um importante instrumento neste processo. Propõe-se um modelo de cobrança desses serviços cuja viabilidade é verificada na simulação feita para o município de Santo André-SP. Levanta-se, ainda, dados sobre as formas de cobrança existentes em diversos municípios e a situação dos serviços de limpeza urbana no Brasil. Conclui-se que o gerenciamento de resíduos sólidos deve ser executado no âmbito de uma política pública local para o setor e que o modelo de cobrança proposto tem maior aplicabilidade em cidades de médio a grande porte.

Aspectos técnicos e ambientais da incineração de resíduos sólidos urbanos: considerações sobre a proposta para São Paulo

A tecnologia de incineração no gerenciamento de resíduos sólidos urbanos é empregada de maneira intensa em diversos países do mundo. No Brasil, além da sua utilização eventual em resíduos de serviços de saúde, há uma proposta para implantação de duas usinas de grande porte visando ao tratamento térmico de resíduos sólidos domiciliares na cidade de São Paulo. Através de uma revisão bibliográfica sobre o tema, são apresentados os principais parâmetros técnicos e ambientais desta tecnologia, entre eles os mecanismos de combustão e de formação de poluentes, os tipos de equipamentos empregados, as formas de manejo e disposição de cinzas e escórias e os métodos de controle e redução de emissões atmosféricas como gases ácidos, material particulado e metais pesados. Também é feita uma revisão do atual conhecimento técnico-científico sobre dioxinas e furanos relativamente à incineração de resíduos sólidos urbanos. A partir desta base teórica pesquisada e da análise dos Estudos de Impacto Ambiental e dos Relatórios de Impacto Ambiental das usinas de incineração de Santo Amaro e Sapopemba, conclui-se que tais incineradores, na forma como são propostos, não apresentam o nível tecnológico necessário para atender às normas de operação e emissão de poluentes vigentes em países onde há legislação regulando esta atividade.

Proceedings of the Fifth National Congress : Waste Management Technology and Resource & Energy Recovery /

Includes bibliographical references.

The salvage industry : what it is, how it works /

"This condensation (SW-29c.1)--is based on Salvage markets for materials in solid wastes by Arsen Darnay and William E. Franklin."

Former Ocoya Landfill Site : Livingston County, Illinois.

Illinois EPA's initial evaluation of this site revealed problems such as erosion, exposed waste, low areas at the surface that allowed water to pond, and leachate seeps water that becomes contaminated after contact with landfill waste).

Stratigraphic analysis of the southwestern quadrant of the Cedar Hills Regional Landfill: Incorporating recent borehole explorations and radiometric dating with previous investigations.

This report presents the results of stratigraphic analysis of the southwestern quadrant of the Cedar Hills Regional Landfill (CHRLF). My report was intended to incorporate the recent Area 8 borehole data into the pre-existing analyses. This analysis was conducted during the preparation of the Area 8 Hydrogeologic Report, but is my independent investigation and does not represent the opinion of UEC or their associates. The CHRLF, in Maple Valley, WA, south of Squak Mountain, is a municipal solid waste landfill that has been in operation since the 1960s. A network of borings, the product of previous investigations, exists for the study area. I utilized the compiled boring logs, previous investigations, and the recently acquired data to produce a series of interpretative cross-sections for the study area. I recognized 9 distinct stratigraphic units, including fill. My interpreted stratigraphic units are similar to those identified in previous investigations such as the Area 7 Hydrogeologic investigation (HDR Engineering and Associates, 2008). These units include pre-Olympia aged non-glacial alluvium, glacial alluvium, and glacial till. Additionally, younger, Vashon-aged deposits of glacial till, recessional outwash, recessional lacustrine, and ice-contact were observed. An isolated “till-like” deposit was observed below the Vashon till. This could possibly represent an older till as mapped by Sweet Edwards (1985) and Booth (1995). I cite the continuity of the lower contact of the Vashon till (Unit 5, Table 2) and the upper contact pre-Vashon non-glacial fluvial deposits (Unit 9, Table 2) as evidence that faults or other structural features do not offset the deposits in the study area. This conclusion supports the findings of the pre-existing body of work within the landfill property and the nearby Queen City Farms property.

Concurrent microscopic observations and activity measurements of cellulose hydrolyzing and methanogenic populations during the batch anaerobic digestion of crystalline cellulose

This study compares process data with microscopic observations from an anaerobic digestion of organic particles. As the first part of the study, this article presents detailed observations of microbial biofilm architecture and structure in a 1.25-L batch digester where all particles are of an equal age. Microcrystalline cellulose was used as the sole carbon and energy source. The digestions were inoculated with either leachate from a 220-Lanaerobic municipal solid waste digester or strained rumen contents from a fistulated cow. The hydrolysis rate, when normalized by the amount of cellulose remaining in the reactor, was found to reach a constant value 1 day after inoculation with rumen fluid, and 3 days after inoculating with digester leachate. A constant value of a mass specific hydrolysis rate is argued to represent full colonization of the cellulose surface and first-order kinetics only apply after this point. Additionally, the first-order hydrolysis rate constant, once surfaces were saturated with biofilm, was found to be two times higher with a rumen inoculum, compared to a digester leachate inoculum. Images generated by fluorescence in situ hybridization (FISH) probing and confocal laser scanning microscopy show that the microbial communities involved in the anaerobic biodegradation process exist entirely within the biofilm. For the reactor conditions used in these experiments, the predominant methanogens exist in ball-shaped colonies within the biofilm. (C) 2005 Wiley Periodicals, Inc.

Structure of a cellulose degrading bacterial community during anaerobic digestion

It is widely accepted that cellulose is the rate-limiting substrate in the anaerobic digestion of organic solid wastes and that cellulose solubilisation is largely mediated by surface attached bacteria. However, little is known about the identity or the ecophysiology of cellulolytic microorganisms from landfills and anaerobic digesters. The aim of this study was to investigate an enriched cellulolytic microbial community from an anaerobic batch reactor. Chemical oxygen demand balancing was used to calculate the cellulose solubilisation rate and the degree of cellulose solubilisation. Fluorescence in situ hybridisation (FISH) was used to assess the relative abundance and physical location of three groups of bacteria belonging to the Clostridium lineage of the Firmicutes that have been implicated as the dominant cellulose degraders in this system. Quantitation of the relative abundance using FISH showed that there were changes in the microbial community structure throughout the digestion. However, comparison of these results to the process data reveals that these changes had no impact on the cellulose solubilisation in the reactor. The rate of cellulose solubilisation was approximately stable for much of the digestion despite changes in the cellulolytic population. The solubilisation rate appears to be most strongly affected by the rate of surface area colonisation and the biofilm architecture with the accepted model of first order kinetics due to surface area limitation applying only when the cellulose particles are fully covered with a thin layer of cells. (c) 2005 Wiley Periodicals, Inc.

Comparison of cellulose solubilisation rates in rumen and landfill leachate inoculated reactors

The aim of this study was to conduct a number of controlled digestions to obtain easily comparable cellulose solubilisation rates and to compare these rates to those found in the literature to see which operational differences were significant in affecting cellulose degradation during anaerobic digestion. The results suggested that differences in volumetric cellulose solubilisation rates were not indicative of the true performance of cellulose digestion systems. When cellulose solubilisation rates were normalised by the mass of cellulose in the reactor at each time step, the comparison of the rates became more meaningful. Cellulose solubilisation was surface area limited. Therefore, changes in the loading rate of cellulose to the reactor altered the volumetric solubilisation rate without changing the mass normalised rate. Comparison of mass normalised solubilisation rates from this study and the literature demonstrated that differences in reactor configuration and operational conditions did not significantly impact on the solubilisation rate whereas the difference in composition of the microbial communities showed a marked effect. This work highlights the importance of using appropriately normalised data when making comparisons between systems with differing operational conditions. (c) 2005 Elsevier Ltd. All rights reserved.