Using crop simulation to generate genotype by environment interaction effects for sorghum in water-limited environments

Multi-environment trials (METs) used to evaluate breeding lines vary in the number of years that they sample. We used a cropping systems model to simulate the target population of environments (TPE) for 6 locations over 108 years for 54 'near-isolines' of sorghum in north-eastern Australia. For a single reference genotype, each of 547 trials was clustered into 1 of 3 'drought environment types' (DETs) based on a seasonal water stress index. Within sequential METs of 2 years duration, the frequencies of these drought patterns often differed substantially from those derived for the entire TPE. This was reflected in variation in the mean yield of the reference genotype. For the TPE and for 2-year METs, restricted maximum likelihood methods were used to estimate components of genotypic and genotype by environment variance. These also varied substantially, although not in direct correlation with frequency of occurrence of different DETs over a 2-year period. Combined analysis over different numbers of seasons demonstrated the expected improvement in the correlation between MET estimates of genotype performance and the overall genotype averages as the number of seasons in the MET was increased.

Polyethylene flow prediction with a differential multi-mode Pom-Pom model

We report the first steps of a collaborative project between the University of Queensland, Polyflow, Michelin, SK Chemicals, and RMIT University; on simulation, validation and application of a recently introduced constitutive model designed to describe branched polymers. Whereas much progress has been made on predicting the complex flow behaviour of many - in particular linear - polymers, it sometimes appears difficult to predict simultaneously shear thinning and extensional strain hardening behaviour using traditional constitutive models. Recently a new viscoelastic model based on molecular topology, was proposed by McLeish and Larson (1998). We explore the predictive power of a differential multi-mode version of the pom-pom model for the flow behaviour of two commercial polymer melts: a (long-chain branched) low-density polyethylene (LDPE) and a (linear) high-density polyethylene (HDPE). The model responses are compared to elongational recovery experiments published by Langouche and Debbaut (1999), and start-up of simple shear flow, stress relaxation after simple and reverse step strain experiments carried out in our laboratory.

Parenteral and mucosal delivery of a novel multi-epitope M protein-based group A streptococcal vaccine construct: investigation of immunogenicity in mice

Primary vaccine strategies against group A streptococci (GAS) have focused on the M protein-the target of opsonic antibodies important for protective immunity. We have previously reported protection of mice against GAS infection following parenteral delivery of a multi-epitope vaccine construct, referred to as a heteropolymer. This current report has assessed mucosal (intranasal (i.n.) and oral) delivery of the heteropolymer in mice with regard to the induction and specificity of mucosal and systemic antibody responses, and compared this to parenteral delivery. GAS-specific IgA responses were detected in saliva and gut upon i.n. and oral delivery of the heteropolymer co-administered with cholera toxin B subunit, respectively. High titre serum IgG responses were elicited to the heteropolymer following all routes of delivery when administered with adjuvant. Moreover, as with parenteral delivery, serum IgG antibodies were detected to the individual heteropolymer peptides following i.n. but not oral delivery. These data support the potential of the i.n. route in the mucosal delivery of a GAS vaccine. (C) 2002 Elsevier Science Ltd. All rights reserved.

Acquisition and loss of Porphyromonas gingivalis, Actinobacillus actinomycetemcomitans and Prevotella intermedia over a 5-year period: effect of a triclosan/copolymer dentifrice

Objectives: The present study describes the natural history of Porphyromonas gingivalis, Actinobacillus actinomycetemcomitans and Prevotella intermedia over a 5-year period and the effect of a triclosan/copolymer dentifrice on these organisms in a normal adult population. Material and Methods: Subgingival plaque samples were collected from 504 adult volunteers. Probing pocket depths (PPD) and relative attachment levels were measured using an automated probe. Participants were matched for disease status (CPI), plaque index, age and gender, and allocated to receive either a triclosan/copolymer or placebo dentifrice. Re-examination and subgingival plaque sampling was repeated after 1, 2, 3, 4 and 5 years. P. gingivalis, A. actinomycetemcomitans and P. intermedia were detected and quantitated using an enzyme linked immunosorbent assay. Logistic regression and generalised linear modelling were used to analyse the data. Results: This 5-year longitudinal study showed considerable volatility in acquisition and loss (below the level of detection) of all three organisms in this population. Relatively few subjects had these organisms on multiple occasions. While P. gingivalis was related to loss of attachment and to PPD greater than or equal to3.5 mm, there was no relationship between A. actinomycetemcomitans or P. intermedia and disease progression over the 5 years of the study. Smokers with P. gingivalis had more PPD greater than or equal to3.5 mm than smokers without this organism. There was no significant effect of the triclosan dentifrice on P. gingivalis or A. actinomycetemcomitans . Subjects using triclosan were more likely to have P. intermedia than those not using the dentifrice; however this did not translate into these subjects having higher levels of P. intermedia and its presence was uniform showing no signs of increasing over the course of the study. Conclusion: The present 5-year longitudinal study has shown the transient nature of colonisation with P. gingivalis , A. actinomycetemcomitans and P. intermedia in a normal adult population. The use of a triclosan-containing dentifrice did not lead to an overgrowth of these organisms. The clinical effect of the dentifrice would appear to be independent of its antimicrobial properties.

Selecting methods to solve multi-well master equations

There are several competing methods commonly used to solve energy grained master equations describing gas-phase reactive systems. When it comes to selecting an appropriate method for any particular problem, there is little guidance in the literature. In this paper we directly compare several variants of spectral and numerical integration methods from the point of view of computer time required to calculate the solution and the range of temperature and pressure conditions under which the methods are successful. The test case used in the comparison is an important reaction in combustion chemistry and incorporates reversible and irreversible bimolecular reaction steps as well as isomerizations between multiple unimolecular species. While the numerical integration of the ODE with a stiff ODE integrator is not the fastest method overall, it is the fastest method applicable to all conditions.

Actively shielded multi-layer gradient coil designs with improved cooling properties

In standard cylindrical gradient coils consisting of a single layer of wires, a limiting factor in achieving very large magnetic field gradients is the rapid increase in coil resistance with efficiency. This is a particular problem in small-bore scanners, such as those used for MR microscopy. By adopting a multi-layer design in which the coil wires are allowed to spread out into multiple layers wound at increasing radii, a more favourable scaling of resistance with efficiency is achieved, thus allowing the design of more powerful gradient coils with acceptable resistance values. Previously this approach has been applied to the design of unshielded, longitudinal, and transverse gradient coils. Here, the multi-layer approach has been extended to allow the design of actively shielded multi-layer gradient coils, and also to produce coils exhibiting enhanced cooling characteristics. An iterative approach to modelling the steady-state temperature distribution within the coil has also been developed. Results indicate that a good level of screening can be achieved in multi-layer coils, that small versions of such coils can yield higher efficiencies at fixed resistance than conventional two-layer (primary and screen) coils, and that performance improves as the number of layers of increases. Simulations show that by optimising multi-layer coils for cooling it is possible to achieve significantly higher gradient strengths at a fixed maximum operating temperature. A four-layer coil of 8 mm inner diameter has been constructed and used to test the steady-state temperature model. (C) 2003 Elsevier Inc. All rights reserved.

Low temperature induced spikelet sterility in rice. I. Nitrogen fertilisation and sensitive reproductive period

Low temperature during panicle development in rice increases spikelet sterility. This effect is exacerbated by high rates of nitrogen (N) application in the field. Spikelet sterility induced by low temperature and N fertilisation was examined in glasshouse experiments to clarify the mechanisms involved. In two glasshouse experiments, 12-h periods of low (18/13degreesC) and high (28/23degreesC) day/night temperatures were imposed over periods of 5-7 days during panicle development, to determine the effects of low temperature and N fertilisation on spikelet sterility. In one experiment, 50% sunlight was imposed together with low temperature to investigate the additive effects of reduced solar radiation and low temperature. The effect of increased tillering due to N fertilisation was examined by a tiller removal treatment in the same experiment. Pollen grain number and spikelet sterility were recorded at heading and harvest, respectively. Although there was no significant effect of low temperature on spikelet sterility in the absence of applied N, low temperature greatly increased spikelet sterility as a result of a reduction in the number of engorged pollen grains per anther in the presence of applied N. Spikelet sterility was strongly correlated with the number of engorged pollen grains per anther. Low temperature during very early ( late stage of spikelet differentiation-pollen mother cell stage) and peak ( second meiotic division stage-early stage of extine formation) microspore development caused a severe reduction in engorged pollen production mainly as a result of reduced total pollen production. Unlike low temperature, the effect of shading was rather small. The increased tillering due to application of high rates of N, increased both spikelet number per plant and spikelet sterility under low temperature conditions. The removal of tillers as they appeared reduced the number of total spikelets per plant and maintained a large number of engorged pollen grains per anther which, in turn, reduced spikelet sterility. The number of engorged pollen grains per anther determined the numbers of intercepted and germinated pollen grains on the stigma. It is concluded that N increased tillering and spikelet number per plant and this, in turn, reduced the number of engorged pollen grains per anther, leading into increased spikelet sterility under low temperature condition.

Indicadores de Ciência, Tecnologia & Inovação : análise da produção científica e tecnológica da área de conhecimento em Engenharia Civil na Base de Dados da Web of Science

Esta dissertação trata da análise da produção científica e tecnológica internacional e brasileira na área de conhecimento Engenharia Civil, por meio de indicadores bibliométricos. A área Engenharia Civil foi escolhida em razão da sua relevância para o desenvolvimento econômico do país. No entanto, em termos absolutos e relativos, está entre os setores tecnologicamente mais atrasados da economia. A bibliometria é uma disciplina com alcance multidisciplinar que estuda o uso e os aspectos quantitativos da produção científica registrada. Os indicadores de produção científica são objeto de análise de várias áreas do conhecimento, tanto para o planejamento e a execução de políticas públicas de vários setores quanto para maior conhecimento da comunidade científica sobre o sistema em que está inserida. A metodologia utilizada para a elaboração deste estudo descritivo de caráter exploratório foi a análise documental e bibliométrica, baseada em dados das publicações científicas, no período de 1970 a 2012, e tecnológicas, no período de 2001 a 2012, da área Engenharia Civil, indexadas nas bases de dados Science Citattion Index Expanded (SCI); Social Science Citation Index (SSCI); Conference Proceedings Citation Index (CPCI) e da Derwent Innovations Index (DII), que compõem a base de dados multidisciplinar da Web of Sicence (WoS). As informações foram qualificadas e quantificadas com o auxílio do software bibliométrico VantagePoint®. Os resultados obtidos confirmaram o baixo número de publicações científicas e tecnológicas na área de conhecimento Engenharia Civil de autores filiados a instituições de ensino e pesquisa brasileiras quando comparados aos dos países industrializados. Existe um conjunto de fortes condicionantes que ultrapassam o poder de decisão e de influência da academia, dificultando e limitando a disseminação das pesquisas e patentes brasileiras relacionadas a fatores de caráter sistêmico e cultural. A possibilidade de análise de indicadores de produção científica e tecnológica na Engenharia Civil contribui para criar políticas que, se utilizadas por agências de fomento, podem subsidiar investimentos mais fundamentados por parte dos governos e da iniciativa privada, a exemplo do que é feito por outros setores industriais.

Conteúdos de ensino da educação física escolar : da produção acadêmica às narrativas docentes

Possui como objetivo compreender a relação entre os conteúdos de ensino com a especificidade da Educação Física. Se caracteriza pela abordagem plurimetodológica qualitativa/quantitativa e foi delineada em três capítulos que dialogam entre si, considerando a natureza das fontes estudadas e os pressupostos teórico-metodológicos assumidos. Do tipo “estado do conhecimento”, o primeiro capítulo investiga as produções acadêmicas que versam sobre os conteúdos de ensino da Educação Física escolar, no período de 1981 a 2010. Os 146 artigos mapeados encontram-se distribuídos em 14 periódicos, analisados por meio de indicadores bibliométricos (MUGNAINI; CARVALHO; CAMPANATTI-OSTIZ, 2006). A pesquisa indica os autores que se constituem como referência numérica na área e sua relação com os Programas de Pós-Graduação, suas linhas de estudo e os grupos de pesquisa que oferecem suporte teórico-metodológico. O segundo capítulo, de natureza quali-quantitativa, discute a opinião de 266 professores de Educação Física do Estado do Espírito Santo sobre os processos de seleção e sistematização dos conteúdos de ensino, expressos em um questionário elaborado com perguntas fechadas e semiabertas. Dá visibilidade às aproximações dos conteúdos com a cultura local e às implicações das lógicas de escolarização na escolha do que e quando ensinar. O terceiro capítulo se caracteriza por ser uma pesquisa narrativa (CERTEAU, 2002; RIBEIRO; SOUZA, 2010) e evidencia o modo como os professores de Educação Física trabalham com os conteúdos de ensino. Possui como colaboradores 14 docentes de Educação Física atuantes na Educação Básica da Microrregião Metropolitana do Estado do Espírito Santo e, para a produção das fontes, utiliza uma entrevista semiestruturada, um grupo focal e três a cinco narrativas individuais orais. Os professores explicitam os saberes privilegiados por essa disciplina como aqueles incorporados pela imbricação do Eu na situação e pela distanciação-regulação (CHARLOT, 2000). Ao dar visibilidade aos projetos de ensino desenvolvidos pelos professores, a pesquisa apresenta possibilidades de se constituir uma integração curricular, por meio de temas que perpassam diferentes disciplinas