Decrescita sostenibile applicata alla mobilità nelle aree urbane.

La mobilità nelle aree urbane di medie e grandi dimensioni risente di molte criticità e spesso è causa di numerose discussioni. L'utilizzo sempre crescente del mezzo di trasporto privato ha prodotto conseguenze negative: l'aumento del traffico e degli incidenti stradali, dell'inquinamento atmosferico e del rumore sono accompagnati da un forte spreco energetico. Dall'altra parte, il trasporto pubblico locale (TPL) non è riuscito a costruirsi canali preferenziali all'interno dell'immaginario cittadino, poiché sottomesso da un modello economico e un mercato fortemente dipendenti dall'automobile. Una via d'uscita dalla mobilità non sostenibile basata sull'utilizzo di combustibili fossili porta a concepire un trasporto pubblico locale gratuito, fruibile dal cittadino in qualsiasi momento della giornata. Attraverso un'analisi dell'azienda del trasporto pubblico bolognese (ATC) e dei dati provenienti dalla sanità regionale, questa tesi intende mostrare che vi sarà un miglioramento della qualità di vita in aree urbane nel momento in cui la teoria della decrescita venga condivisa da tutti i cittadini. Così sarà possibile liberare i centri urbani dai mezzi privati e quindi dagli alti livelli di inquinamento acustico e atmosferico, e dare ai cittadini la vera libertà di movimento. Mobility in medium and large sized urban areas is critical and often a cause for numerous debates. The use of private transport is in constant increase and has generated negative consequences: congestion and road accidents, air and noise pollutio as well as a considerable waste of energy. On the other hand, the local public transport (LPT) has not succeeded in representing the preferred choice by citizens in the urban imaginary. Its potential has been subdued by economic models and markets that are largely dependant on the production of vehicles. An alternative to the current non sustainable mobility based on the combustion of fossil fuels could be the provision of a free local transport network available to the citizen from anywhere at any time. This dissertation's objective is to show how an improvement of the quality of life in urban areas is connected to a collective awareness on the degrowth theory. I intend to achieve this by analysing thoroughly the system of the public transportation agency in Bologna (ATC) and considering data from the local health department. Only then we will be able to limit private vehicles from city centres and as a result of that drastically decrease air and noise pollution whilst providing a true service for a free moving citizen.

Gli affidamenti c.d. in house nell'ordinamento comunitario e nazionale con particolare riferimento al settore dei trasporti pubblici

Il presente progetto di ricerca analizza quella particolare forma di affidamento diretto dei servizi pubblici denominata in house providing e si articola in tre sezioni. Nella prima sezione viene analizzata la disciplina dei servizi pubblici locali nell’ordinamento italiano mediante un excursus normativo dai primi del 900 ad oggi; la seconda sezione è dedicata alla disciplina dell’affidamento dei servizi pubblici locali di trasporto; la terza sezione, infine, descrive l’in house providing e l’elaborazione pretoria di tale istituto operata dalla giurisprudenza comunitaria. Come noto, la pubblica amministrazione può soddisfare le sue esigenze secondo due diverse modalità: ricorrendo al libero mercato come qualsiasi altro operatore economico oppure auto-producendo i beni e i servizi di cui necessita. Infatti, nonostante il diritto comunitario imponga il rispetto del principio di tutela della concorrenza, lascia impregiudicato il potere di auto-organizzazione in capo alle pubbliche amministrazioni negli Stati membri, le quali potranno scegliere di agire “in economia” o di ricorrere alle prestazioni di operatori terzi. Con la locuzione di derivazione comunitaria in house providing si definisce quel modello organizzativo mediante il quale le pubbliche amministrazioni realizzano le attività di loro competenza attraverso i propri organismi, cioè senza ricorrere al libero mercato per procurarsi i lavori, i servizi e le forniture ad esse occorrenti o per erogare alla collettività prestazioni di pubblico servizio, in deroga ai principi comunitari sulla tutela della concorrenza stabiliti nel Trattato istitutivo della Comunità Europea, che invece imporrebbero lo svolgimento di gare ad evidenza pubblica per l'affidamento di tali servizi. Tuttavia, come chiarito dalla giurisprudenza comunitaria e nazionale, affinché la procedura di gara non sia necessaria, occorre che tra l’amministrazione e il prestatore ci sia sostanziale identità, nonostante le distinte personalità giuridiche, in modo tale da configurare il contratto tra le stesse intercorso come un atto di organizzazione interna.

The socio-cultural impact of the introduction of motorbike taxis in the rural community of Tombel, South West region, Cameroon

“The socio-cultural impact of the introduction of motorbike taxis in the rural community of Tombel, South West region, Cameroon” seeks to bring out the impact of commercial motorbike taxis on the lifestyle of the Bakossi. The principal objective of this research is to show how the introduction of motorbike taxis has modified the lifestyle of the Tombel population. This anthropological research defines the profile of a motorbike taxi rider, his role in society, the perception of the population towards this activity and the impact of this activity on the lifestyle of the rural population of Tombel. This study reveals that motorbike taxi riders are essentially made up of youths from all works of life who earn a living by riding a motorbike taxi on a daily bases for commercial purposes. The revenue earn here goes a long way to sustain the livelihood of the rider and his entourage, becoming an ascension tool into the social ladder. The activity is very dangerous not only for the riders buts also for the passengers because of the risks involved in riding for most of the riders do not have the basic knowledge of the road code. This research also reveals that motorbike taxi has become the preferred means of public transport of most inhabitants of Tombel to the point of monopolising certain destinations. The population of Tombel perceives this activity as an instrument of change that has brought development and progress. But this activity also constitutes a social ill because of the prevalent sexual promiscuity encouraged by the riders. This activity has also gotten a cultural impact on the society, changing perceptions and being involve in rituals. Motorbike taxis have become a force to reckon with in the organisation of the community. They are a “response from below” to the transport crises in Cameroon.

Explosionsfeste Transportbehälter – mehr Sicherheit für das Transportwesen

Weltweit ist eine Zunahme terroristischer Aktivitäten zu verzeichnen, sodass allgemein damit gerechnet werden muss, dass auch das zivile Verkehrs- und Transportwesen ein bevorzugtes Ziel terroristischer Anschläge darstellt. Mehrfach wurden schon Sprengkörper in Transportmittel des öffentlichen und zivilen Personen- aber auch Güterverkehrs eingeschleust, um die Bevölkerung durch materielle Zerstörung und massive Personenschäden einzuschüchtern und zu beängstigen. Daher ist eine Anpassung der sich derzeit im Einsatz befindlichen Transportbehälter an die geänderten Rahmenbedingungen unerlässlich, um auch den Schutz vor Sprengkörpern, die gemeinsam mit dem Handgepäck in Luft-, Land- und Wasserfahrzeuge eingeschleust werden, zu gewährleisten.

Riding the Escalator: How Dangerous is it Really?

INTRODUCTION About 10,000 escalator-related injuries per year result in emergency department treatment in the United States. Since the 1990s, a steady increase has been reported, but few statistics on escalator-related injuries have been published worldwide. We have therefore analyzed escalator accident statistics in admissions to our hospital in Switzerland since 2000. METHODS Using retrospective electronic patient chart analysis, we included in our study patients >16 years treated over an 11-year period. We categorized patients in terms of gender, age and associated risk factors, and classified accidents according to day, time, location and cause. Resulting trauma was categorized according to type and location. We divided post-admission treatment into surgical and conservative, and into treatment as an outpatient, in a short-stay unit, or as a hospital admission. Women and men were compared using Fisher's exact test. RESULTS We identified 173 patients with 285 discrete injuries. Of these, 87 patients (50%) were women. Fifty-three (61%) of the women and 38 (44%) of the men were >60 years old (P = 0.033). Fifty percent of the men (43/86) of the men, but only 7% (6/87) of the women showed signs of alcohol intoxication (P < 0.0001). Accidents in women occurred predominantly on Tuesdays (19/87; 22%) between 12pm and 6pm (35/87; 40%), and in men on Saturdays (16/86; 19%) between 6pm and 12am (29/86; 34%; P = 0.0097). Sixty-two percent (44/71) of the accidents were in public transport facilities and 30% (21/71) in shopping centers. The majority of injuries in women were to the lower extremities (49/87; 56%), while most accidents in men were to the head and neck (51/86; 59%; P = 0.0052). About half (90; 52%) of the patients were treated conservatively. Almost half of all patients (76, 44%) required hospital admission. Of those, 45% left the hospital within 24 hours of admission (short stay unit) and 55% stayed longer than 24 hours. CONCLUSION Escalator accidents can result in severe trauma. Significant gender differences in escalator accidents have been observed. Alcohol intoxication and age are significant risk factors in escalator-related accidents and might be possible targets for preventive measures.

Éxitos y desafíos en política de transporte público : análisis comparativo de las innovaciones en la prestación del servicio de transporte público de pasajeros en las ciudades de Curitiba, Brasil; Santiago de Chile, Chile y Rosario, Argentina

En esta artículo realizamos un análisis comparativo de los sistemas de servicio de transporte público de pasajeros en las ciudades de Curitiba, Brasil; Santiago de Chile, Chile y Rosario, Argentina para poder comparar las similitudes, diferencias y dificultades que presentan estos sistemas en la etapa de implementación de las políticas públicas; como así también presentar una sistematización de las políticas, instrumentos y acciones que permitieron gestionar con éxito las reestructuraciones de los sistemas de transporte y sus aportes para el desarrollo de una Política pública de transporte en el Gran Mendoza.

Modelos de demanda potencial de viajeros en redes de transporte público : aplicaciones en el Metro de Madrid

Este trabajo propone una metodología basada en Sistemas de Información Geográfica para estimar la demanda de viajes en estaciones de redes de transporte público, tomando como ejemplo la red de metro de Madrid. Primero se emplea una serie de datos descriptivos para caracterizar la red, clasificar las estaciones y obtener una tipología de las mismas. Luego, con el objetivo de explicar y predecir los viajes (entradas a la red) se generan dos modelos: uno sencillo a partir de las tasas de penetración de uso del metro en función de la distancia (distance decay), y otro más complejo basado en un modelo de regresión lineal múltiple (MRLM) que incorpora variables relativas a la estación y su entorno (densidad, mezcla de usos, diseño urbano, presencia de modos competidores). Su aplicación muestra resultados alentadores, y se plantea como una alternativa a los clásicos modelos de cuatro etapas, más complejos y con un mayor coste económico.

Diagnóstico de sistema integrado de transporte de passageiros com uso de sistema de informação geográfica : o caso da cidade de Macaé – RJ – Brasil : resultados preliminares

O Sistema Integrado de Transporte Coletivo do município de Macaé – RJ tem sido alvo de diversas críticas atualmente e reflete a dificuldade dos gestores urbanos em acompanhar as rápidas transformações da “capital nacional do petróleo", levantando a necessidade de métodos de diagnósticos eficientes em sistemas de transporte de passageiros. Desta forma, o objetivo do trabalho é diagnosticar o sistema de transporte público de Macaé - RJ e analisar o uso de Sistema de Informação Geográfica, tendo em vista a eficiência do diagnóstico. A metodologia se baseia em dados operacionais do sistema de transporte, confecção de mapas e análises espaciais com uso do software Transcad 4.5 Full. Os resultados apontam dificuldades estruturais no sistema como, por exemplo, a localização indevida de 2 Terminais, a sobrecarga de linhas alimentadoras com necessidade demasiada de transbordo, a falta de atendimento direto de importantes linhas de desejo, a desestabilidade na operação, etc. A utilização do SIG demonstrou expressivo ganho de tempo na gestão e análise de informações de forma integrada, devendo-se ponderar, em alguns casos, o método de mapeamento e a relação tempo de trabalho x ganho de conhecimento, assim como a necessidade de integração com informações operacionais do sistema de transporte.

Modelling the Impact of Built Environment, Geographical Scales and Latent Constructs On Individual Travel Behaviour

La relación entre la estructura urbana y la movilidad ha sido estudiada desde hace más de 70 años. El entorno urbano incluye múltiples dimensiones como por ejemplo: la estructura urbana, los usos de suelo, la distribución de instalaciones diversas (comercios, escuelas y zonas de restauración, parking, etc.). Al realizar una revisión de la literatura existente en este contexto, se encuentran distintos análisis, metodologías, escalas geográficas y dimensiones, tanto de la movilidad como de la estructura urbana. En este sentido, se trata de una relación muy estudiada pero muy compleja, sobre la que no existe hasta el momento un consenso sobre qué dimensión del entorno urbano influye sobre qué dimensión de la movilidad, y cuál es la manera apropiada de representar esta relación. Con el propósito de contestar estas preguntas investigación, la presente tesis tiene los siguientes objetivos generales: (1) Contribuir al mejor entendimiento de la compleja relación estructura urbana y movilidad. y (2) Entender el rol de los atributos latentes en la relación entorno urbano y movilidad. El objetivo específico de la tesis es analizar la influencia del entorno urbano sobre dos dimensiones de la movilidad: número de viajes y tipo de tour. Vista la complejidad de la relación entorno urbano y movilidad, se pretende contribuir al mejor entendimiento de la relación a través de la utilización de 3 escalas geográficas de las variables y del análisis de la influencia de efectos inobservados en la movilidad. Para el análisis se utiliza una base de datos conformada por tres tipos de datos: (1) Una encuesta de movilidad realizada durante los años 2006 y 2007. Se obtuvo un total de 943 encuestas, en 3 barrios de Madrid: Chamberí, Pozuelo y Algete. (2) Información municipal del Instituto Nacional de Estadística: dicha información se encuentra enlazada con los orígenes y destinos de los viajes recogidos en la encuesta. Y (3) Información georeferenciada en Arc-GIS de los hogares participantes en la encuesta: la base de datos contiene información respecto a la estructura de las calles, localización de escuelas, parking, centros médicos y lugares de restauración. Se analizó la correlación entre e intra-grupos y se modelizaron 4 casos de atributos bajo la estructura ordinal logit. Posteriormente se evalúa la auto-selección a través de la estimación conjunta de las elecciones de tipo de barrio y número de viajes. La elección del tipo de barrio consta de 3 alternativas: CBD, Urban y Suburban, según la zona de residencia recogida en las encuestas. Mientras que la elección del número de viajes consta de 4 categorías ordinales: 0 viajes, 1-2 viajes, 3-4 viajes y 5 o más viajes. A partir de la mejor especificación del modelo ordinal logit. Se desarrolló un modelo joint mixed-ordinal conjunto. Los resultados indican que las variables exógenas requieren un análisis exhaustivo de correlaciones con el fin de evitar resultados sesgados. ha determinado que es importante medir los atributos del BE donde se realiza el viaje, pero también la información municipal es muy explicativa de la movilidad individual. Por tanto, la percepción de las zonas de destino a nivel municipal es considerada importante. En el contexto de la Auto-selección (self-selection) es importante modelizar conjuntamente las decisiones. La Auto-selección existe, puesto que los parámetros estimados conjuntamente son significativos. Sin embargo, sólo ciertos atributos del entorno urbano son igualmente importantes sobre la elección de la zona de residencia y frecuencia de viajes. Para analizar la Propensión al Viaje, se desarrolló un modelo híbrido, formado por: una variable latente, un indicador y un modelo de elección discreta. La variable latente se denomina “Propensión al Viaje”, cuyo indicador en ecuación de medida es el número de viajes; la elección discreta es el tipo de tour. El modelo de elección consiste en 5 alternativas, según la jerarquía de actividades establecida en la tesis: HOME, no realiza viajes durante el día de estudio, HWH tour cuya actividad principal es el trabajo o estudios, y no se realizan paradas intermedias; HWHs tour si el individuo reaiza paradas intermedias; HOH tour cuya actividad principal es distinta a trabajo y estudios, y no se realizan paradas intermedias; HOHs donde se realizan paradas intermedias. Para llegar a la mejor especificación del modelo, se realizó un trabajo importante considerando diferentes estructuras de modelos y tres tipos de estimaciones. De tal manera, se obtuvieron parámetros consistentes y eficientes. Los resultados muestran que la modelización de los tours, representa una ventaja sobre la modelización de los viajes, puesto que supera las limitaciones de espacio y tiempo, enlazando los viajes realizados por la misma persona en el día de estudio. La propensión al viaje (PT) existe y es específica para cada tipo de tour. Los parámetros estimados en el modelo híbrido resultaron significativos y distintos para cada alternativa de tipo de tour. Por último, en la tesis se verifica que los modelos híbridos representan una mejora sobre los modelos tradicionales de elección discreta, dando como resultado parámetros consistentes y más robustos. En cuanto a políticas de transporte, se ha demostrado que los atributos del entorno urbano son más importantes que los LOS (Level of Service) en la generación de tours multi-etapas. la presente tesis representa el primer análisis empírico de la relación entre los tipos de tours y la propensión al viaje. El concepto Propensity to Travel ha sido desarrollado exclusivamente para la tesis. Igualmente, el desarrollo de un modelo conjunto RC-Number of trips basado en tres escalas de medida representa innovación en cuanto a la comparación de las escalas geográficas, que no había sido hecha en la modelización de la self-selection. The relationship between built environment (BE) and travel behaviour (TB) has been studied in a number of cases, using several methods - aggregate and disaggregate approaches - and different focuses – trip frequency, automobile use, and vehicle miles travelled and so on. Definitely, travel is generated by the need to undertake activities and obtain services, and there is a general consensus that urban components affect TB. However researches are still needed to better understand which components of the travel behaviour are affected most and by which of the urban components. In order to fill the gap in the research, the present dissertation faced two main objectives: (1) To contribute to the better understanding of the relationship between travel demand and urban environment. And (2) To develop an econometric model for estimating travel demand with urban environment attributes. With this purpose, the present thesis faced an exhaustive research and computation of land-use variables in order to find the best representation of BE for modelling trip frequency. In particular two empirical analyses are carried out: 1. Estimation of three dimensions of travel demand using dimensions of urban environment. We compare different travel dimensions and geographical scales, and we measure self-selection contribution following the joint models. 2. Develop a hybrid model, integrated latent variable and discrete choice model. The implementation of hybrid models is new in the analysis of land-use and travel behaviour. BE and TB explicitly interact and allow richness information about a specific individual decision process For all empirical analysis is used a data-base from a survey conducted in 2006 and 2007 in Madrid. Spatial attributes describing neighbourhood environment are derived from different data sources: National Institute of Statistics-INE (Administrative: municipality and district) and GIS (circular units). INE provides raw data for such spatial units as: municipality and district. The construction of census units is trivial as the census bureau provides tables that readily define districts and municipalities. The construction of circular units requires us to determine the radius and associate the spatial information to our households. The first empirical part analyzes trip frequency by applying an ordered logit model. In this part is studied the effect of socio-economic, transport and land use characteristics on two travel dimensions: trip frequency and type of tour. In particular the land use is defined in terms of type of neighbourhoods and types of dwellers. Three neighbourhood representations are explored, and described three for constructing neighbourhood attributes. In particular administrative units are examined to represent neighbourhood and circular – unit representation. Ordered logit models are applied, while ordinal logit models are well-known, an intensive work for constructing a spatial attributes was carried out. On the other hand, the second empirical analysis consists of the development of an innovative econometric model that considers a latent variable called “propensity to travel”, and choice model is the choice of type of tour. The first two specifications of ordinal models help to estimate this latent variable. The latent variable is unobserved but the manifestation is called “indicators”, then the probability of choosing an alternative of tour is conditional to the probability of latent variable and type of tour. Since latent variable is unknown we fit the integral over its distribution. Four “sets of best variables” are specified, following the specification obtained from the correlation analysis. The results evidence that the relative importance of SE variables versus BE variables depends on how BE variables are measured. We found that each of these three spatial scales has its intangible qualities and drawbacks. Spatial scales play an important role on predicting travel demand due to the variability in measures at trip origin/destinations within the same administrative unit (municipality, district and so on). Larger units will produce less variation in data; but it does not affect certain variables, such as public transport supply, that are more significant at municipality level. By contrast, land-use measures are more efficient at district level. Self-selection in this context, is weak. Thus, the influence of BE attributes is true. The results of the hybrid model show that unobserved factors affect the choice of tour complexity. The latent variable used in this model is propensity to travel that is explained by socioeconomic aspects and neighbourhood attributes. The results show that neighbourhood attributes have indeed a significant impact on the choice of the type of tours either directly and through the propensity to travel. The propensity to travel has a different impact depending on the structure of each tour and increases the probability of choosing more complex tours, such as tours with many intermediate stops. The integration of choice and latent variable model shows that omitting important perception and attitudes leads to inconsistent estimates. The results also indicate that goodness of fit improves by adding the latent variable in both sequential and simultaneous estimation. There are significant differences in the sensitivity to the latent variable across alternatives. In general, as expected, the hybrid models show a major improvement into the goodness of fit of the model, compared to a classical discrete choice model that does not incorporate latent effects. The integrated model leads to a more detailed analysis of the behavioural process. Summarizing, the effect that built environment characteristics on trip frequency studied is deeply analyzed. In particular we tried to better understand how land use characteristics can be defined and measured and which of these measures do have really an impact on trip frequency. We also tried to test the superiority of HCM on this field. We can concluded that HCM shows a major improvement into the goodness of fit of the model, compared to classical discrete choice model that does not incorporate latent effects. And consequently, the application of HCM shows the importance of LV on the decision of tour complexity. People are more elastic to built environment attributes than level of services. Thus, policy implications must take place to develop more mixed areas, work-places in combination with commercial retails.

Potential to attract drivers out of their cars in dense urban areas.

Purpose Sustainable mobility urban policies intend reducing car use and increasing walking, cycling and public transport. However, this transfer from private car to these more sustainable modes is only a real alternative where distances are small and the public transport supply competitive enough. This paper proposes a methodology to calculate the number of trips that can be transferred from private car to other modes in city centres. Method The method starts analyzing which kind of trips cannot change its mode (purposes, conditions, safety , etc.), and then setting a process to determine under which conditions trips made by car between given O-D pairs can be transferable. Then, the application of demand models allow to determine which trips fulfil the transferability conditions. The process test the possibility of transfer in a sequential way: firs to walking, then cycling and finally to public transport. Results The methodology is tested through its application to the city of Madrid (Spain), with the result of only some 18% of the trips currently made by car could be made by other modes, under the same conditions of trip time, and without affecting their characteristics. Out of these trips, 75% could be made by public transport, 15% cycling and 10% on foot. The possible mode to be transferred depends on the location: city centre areas are more favourable for walking and cycling while city skirts could attract more PT trips. Conclusions The proposed method has demonstrated its validity to determine the potential of transferring trips out of cars to more sustainable modes. Al the same time it is clear that, even in areas with favourable conditions for walking, cycling and PT trips, the potential of transfer is limited because cars fulfil more properly special requirements of some trips and tours.

Metodología de evaluación de la eficiencia de los servicios de autobús urbano : aplicación a las grandes ciudades españolas en el período 2004-2009

En estos tiempos de crisis se hace imperativo lograr un consumo de recursos públicos lo más racional posible. El transporte público urbano es un sector al que se dedican grandes inversiones y cuya prestación de servicios está fuertemente subvencionada. El incremento de la eficiencia técnica del sector, entendida como la relación entre producción de servicios y consumo de recursos, puede ayudar a conseguir una mejor gestión de los fondos públicos. Un primer paso para que se produzca una mejora es el desarrollo de una metodología de evaluación de la eficiencia técnica de las compañías de transporte público. Existen diferentes métodos para la evaluación técnica de un conjunto de compañías pertenecientes a un sector. Uno de los más utilizados es el método frontera, en el que se encuentra el análisis envolvente de datos (Data Envelopment Analysis, DEA, por sus siglas en inglés). Este método permite establecer una frontera de eficiencia técnica relativa a un determinado grupo de compañías, en función de un número limitado de variables. Las variables deben cuantificar, por un lado, la prestación de servicios de las distintas compañías (outputs), y por el otro, los recursos consumidos en la producción de dichos servicios (inputs). El objetivo de esta tesis es analizar, mediante el uso del método DEA, la eficiencia técnica de los servicios de autobuses urbanos en España. Para ello, se estudia el número de variables más adecuado para conformar los modelos con los que se obtienen las fronteras de eficiencia. En el desarrollo de la metodología se utilizan indicadores de los servicios de autobús urbano de las principales ciudades de las áreas metropolitanas españolas, para el periodo 2004-2009. In times of crisis it is imperative achieve a consumption of public resources as rational as possible. Urban public transport is a sector devoted to large investments and whose services are heavily subsidized. Increase the technical efficiency of the sector, defined as the ratio of service output and resource consumption, can help achieve a better management of public funds. One step to produce an improvement is the development of a methodology for evaluating the technical efficiency of the public transport companies. There are different methods for the technical evaluation of a set of companies within an industry. One of the most widely used methods is the frontier method, in particular the Data Envelopment Analysis (DEA). This method allows the calculation of a technical efficiency frontier on a specific group of companies, based on a limited number of variables. Variables must quantify, on the one hand, the provision of services of different companies (outputs), and on the other hand, the resources consumed in the production of such services (inputs). The objective of this thesis is to analyze, using the DEA method, the technical efficiency of urban bus services in Spain. For this purpose, it is studied the more suitable variables that can be used in the models to obtain the efficiency frontiers. In developing the methodology are used indicators of urban bus services in major cities of the Spanish metropolitan areas for the period 2004-2009.

Real time passenger information systems and quality of bus services

One of the main problems in urban areas is the steady growth in car ownership and traffic levels. Therefore, the challenge of sustainability is focused on a shift of the demand for mobility from cars to collective means of transport. For this end, buses are a key element of the public transport systems. In this respect Real Time Passenger Information (RTPI) systems help citizens change their travel behaviour towards more sustainable transport modes. This paper provides an assessment methodology which evaluates how RTPI systems improve the quality of bus services in two European cities, Madrid and Bremerhaven. In the case of Madrid, bus punctuality has increased by 3%. Regarding the travellers perception, Madrid raised its quality of service by 6% while Bremerhaven increased by 13%. On the other hand, the users ́ perception of Public Transport (PT) image increased by 14%.

User benefit assessment by a dynamic LUTI model for Madrid

Assessing users’ benefit in a transport policy implementation has been studied by many researchers using theoretical or empirical measures. However, few of them measure users’ benefit in a different way from the consumer surplus. Therefore, this paper aims to assess a new measure of user benefits by weighting consumer surplus in order to include equity assessment for different transport policies simulated in a dynamic middle-term LUTI model adapted to the case study of Madrid. Three different transport policies, including road pricing, parking charge and public transport improvement have been simulated through the Metropolitan Activity Relocation Simulator, MARS, the LUTI calibrated model for Madrid). A social welfare function (WF) is defined using a cost benefit analysis function that includes mainly costs and benefits of users and operators of the transport system. Particularly, the part of welfare function concerning the users, (i.e. consumer surplus), is modified by a compensating weight (CW) which represents the inverse of household income level. Based on the modified social welfare function, the effects on the measure of users benefits are estimated and compared with the old WF ́s results as well. The result of the analysis shows that road pricing leads a negative effect on the users benefits specially on the low income users. Actually, the road pricing and parking charge implementation results like a regressive policy especially at long term. Public transport improvement scenario brings more positive effects on low income user benefits. The integrated (road pricing and increasing public services) policy scenario is the one which receive the most user benefits. The results of this research could be a key issue to understanding the relationship between transport systems policies and user benefits distribution in a metropolitan context.

Post-harmonised European National Travel Surveys

Look-up tables are collected and analysed for 12 European National Travel Surveys (NTS) in a harmonized way covering the age group 13-84 year. Travel behaviour measured as kilometres, time use and trips per traveller is compared. Trips per traveller are very similar over the countries whereas kilometres differ most, from minus 28% for Spain to plus 19% and 14% for Sweden and Finland. It is shown that two main factors for differences are GDP per capita and density in the urban areas. The latter is the main reason for the low level in Spain. Mode share is except for Spain with a very high level of walking trips rather similar with a higher level of cycling in the Netherlands, more public transport in Switzerland, and more air traffic in Sweden. Normally kilometres per respondent/inhabitant is used for national planning purpose and this is very affected by the share of mobile travellers. The immobile share is varying between 8 and 28% with 6 NTS at a 15-17% level. These differences are analysed and discussed and it is concluded that the immobile share should be a little less than 15-17% because it is assessed that some short trips might have been forgotten in these 6 countries. The share has a downward tendency with higher density. The resulting immobile share is very dependent on data collection methodology, sampling method, quality of interviewer felt-work etc. The paper shows other possibilities to improve local surveys based on comparison with other countries.

Key quality factors and travellers profiles at interurban interchanges

La planificación y las políticas de transporte no pueden descuidar la calidad del servicio, considerando que influye notablemente en el cambio modal del coche hacia otros medios de transporte más sostenibles. El concepto se aplica también a los intercambiadores de transporte público, los nodos del sistema donde se cruzan las distintas redes del transporte público y privado. Aunque se han logrado numerosos avances para medir y evaluar la calidad en el sector del transporte público, se han dedicado relativamente pocos esfuerzos a investigar estos aspectos relacionados con la calidad de los intercambiadores del transporte público. Este trabajo de investigación se concentra en la calidad del servicio de la transferencia modal en los intercambiadores interurbanos, según la perspectiva de los viajeros. Su objetivo es identificar los factores clave de la calidad del servicio y los perfiles de los viajeros en los intercambiadores. La investigación es exploratoria y ofrece información acerca de la percepción de los viajeros intermodales relacionada con los aspectos de la calidad, aportando nuevos elementos y datos para adentrarse en estudios más detallados. La metodología del trabajo combina técnicas de análisis estadístico multivariante para analizar los datos de las encuestas sobre la satisfacción de los clientes y se subdivide en tres etapas. En primer lugar, se ha implementado el análisis de correspondencias múltiples para explorar los constructos latentes relacionados con la satisfacción de las características cualitativas de los intercambiadores interurbanos, identificando así los factores clave de la calidad. En segundo lugar, se ha aplicado un análisis de conglomerados de k-medias sobre los factores clave de calidad para clasificar a los viajeros en grupos de usuarios de transportes homogéneos, de acuerdo con su percepción de satisfacción, identificando de este modo los perfiles de los viajeros. Por último, se han formulado sugerencias y recomendaciones sobre la calidad para respaldar la formulación de políticas, estableciendo las prioridades para los intercambiadores interurbanos. La metodología se aplicó en cuatro intercambiadores interurbanos (estaciones de ferrocarriles o de autobuses ) en Madrid, Zaragoza, Gothenburg y Lion, analizando los datos recogidos mediante una encuesta de satisfacción del cliente llevada a cabo en 2011 en los cuatro casos de estudio, donde se interconectan distintos medios de transporte público y privado, de corta y larga distancia. Se recogieron datos sobre la satisfacción de los viajeros con 26 criterios de calidad, así como información sobre aspectos socio-económicos y pautas de comportamiento de viajes. Mediante el análisis de correspondencias múltiples se identificaron 4-5 factores clave de calidad en cada intercambiador, que se asocian principalmente con el sistema de emisión de billetes, el confort y la interconexión, mientras que los viajeros no perciben los temas clásicos como la información. Mediante el análisis de conglomerados se identificaron 2-5 perfiles de viajeros en cada intercambiador. Se reconocieron dos grupos de viajeros en casi todos los casos de estudio: viajeros de cercanía/trabajadores y turistas. Por lo que concierne a las prioridades para apoyar a las partes interesadas en la formulación de políticas, la expedición de billetes es el factor clave para los intercambiadores interurbanos españoles, mientras que la interconexión y los aspectos temporales se destacan en los intercambiadores de Francia y Suecia. Quality of Service can not be neglected in public transport planning and policy making, since it strongly influences modal shifts from car to more sustainable modes. This concept is also related to Public Transport interchanges, the nodes of the transport system where the different sub-systems of public passenger transport and personal vehicles meet. Although a lot of progress has been generally done to measure and assess quality in public transport sector, relatively little investigation has been conducted on quality at PT interchanges. This research work focusses on Quality of Service in the use of transfer facilities at interurban interchanges, according to current travellers’ perspective. It aims at identifying key quality factors and travellers profiles at interurban interchanges. The research is exploratory and offers insight into intermodal travellers’ perception on quality aspects, providing new elements and inputs for more definitive investigation. The methodology of the work combines multivariate statistical techniques to analyse data from customer satisfaction surveys and is subdivided in three steps. Firstly, multiple correspondence analysis was performed to explore latent constructs as concern satisfaction of quality attributes at interurban interchanges, thus identifying the so-called Key Quality Factor. Secondly, k-means cluster analysis was implemented on the key quality factors to classify travellers in homogeneous groups of transport users, according to their perception of satisfaction, thus identifying the so-called Travellers Profiles. Finally, hints and recommendations on quality were identified to support policy making, setting priorities for interurban interchanges. The methodology was applied at four interurban interchanges in Madrid, Zaragoza, Gothenburg and Lyon, analysing the data collected through a customer satisfaction survey carried out in 2011 at the four railway or bus stations where different modes of public and private transport are interconnected covering both short and long trips. Data on travellers’ satisfaction with 26 quality attributes were collected, as well as information on socio-economical and travel patterns. Through multiple correspondence analysis were identified 4-5 key quality factors per interchange. They are mainly related to ticketing, comfort and connectivity, while classical issues, as information, are not perceived as important by travellers’. Through cluster analysis were identified 2-5 travellers profiles per interchange. Two groups of travellers can be found in almost all case studies: commuter / business travellers and holiday travellers. As regards the priorities to support stakeholders in policy making, ticketing is the key-issue for the Spanish interurban interchanges, while connectivity and temporal issues emerge in the French and Swedish case studies.