Combination of altimetry data from different satellite missions

Substantial altimetry datasets collected by different satellites have only become available during the past five years, but the future will bring a variety of new altimetry missions, both parallel and consecutive in time. The characteristics of each produced dataset vary with the different orbital heights and inclinations of the spacecraft, as well as with the technical properties of the radar instrument. An integral analysis of datasets with different properties offers advantages both in terms of data quantity and data quality. This thesis is concerned with the development of the means for such integral analysis, in particular for dynamic solutions in which precise orbits for the satellites are computed simultaneously. The first half of the thesis discusses the theory and numerical implementation of dynamic multi-satellite altimetry analysis. The most important aspect of this analysis is the application of dual satellite altimetry crossover points as a bi-directional tracking data type in simultaneous orbit solutions. The central problem is that the spatial and temporal distributions of the crossovers are in conflict with the time-organised nature of traditional solution methods. Their application to the adjustment of the orbits of both satellites involved in a dual crossover therefore requires several fundamental changes of the classical least-squares prediction/correction methods. The second part of the thesis applies the developed numerical techniques to the problems of precise orbit computation and gravity field adjustment, using the altimetry datasets of ERS-1 and TOPEX/Poseidon. Although the two datasets can be considered less compatible that those of planned future satellite missions, the obtained results adequately illustrate the merits of a simultaneous solution technique. In particular, the geographically correlated orbit error is partially observable from a dataset consisting of crossover differences between two sufficiently different altimetry datasets, while being unobservable from the analysis of altimetry data of both satellites individually. This error signal, which has a substantial gravity-induced component, can be employed advantageously in simultaneous solutions for the two satellites in which also the harmonic coefficients of the gravity field model are estimated.

Is education the panacea for economic deprivation of Muslims? Evidence from wage earners in India, 1987-2005

Few researchers have examined the nature and determinants of earnings differentials among religious groups, and none has been undertaken in the context of conflict-prone multi-religious societies like the one in India. We address this lacuna in the literature by examining the differences in the average log earnings of Hindu and Muslim wage earners in India, during the 1987–2005 period. Our results indicate that education differences between Hindu and Muslim wage earners, especially differences in the proportion of wage earners with tertiary education, are largely responsible for the differences in the average log earnings of the two religious groups across the years. By contrast, differences in the returns to education do not explain the aforementioned difference in average log earnings. In conclusion, we discuss some policy implications.

Transgressing community:the case of Muslims in a twenty-first-century British city

This paper draws on ethnographic research carried out in Birmingham, UK – a city significant for its sizeable Muslim population and its iconic role in the history of minority ethnic settlement in Britain – to consider how associations of place and ethnicity work in different ways to inform ideas about ‘Muslim community’ in twenty-first-century Britain. The paper charts happenings around a local event in an area of majority Asian settlement and how representations of the area as a place of Muslim community were used to implicate it in the ‘war on terror’. The paper goes on to show how this sensibility is disrupted by Muslims themselves through alternative engagements with space and ethnicity. The paper argues that these offer a ground for making Muslim community in ways that actively engage with histories and patterns of ethnic settlement in the city rather than being determined by them.

Transgressing community:the case of Muslims in a twenty-first-century British city

This paper draws on ethnographic research carried out in Birmingham, UK - a city significant for its sizeable Muslim population and its iconic role in the history of minority ethnic settlement in Britain - to consider how associations of place and ethnicity work in different ways to inform ideas about 'Muslim community' in twenty-first-century Britain. The paper charts happenings around a local event in an area of majority Asian settlement and how representations of the area as a place of Muslim community were used to implicate it in the 'war on terror'. The paper goes on to show how this sensibility is disrupted by Muslims themselves through alternative engagements with space and ethnicity. The paper argues that these offer a ground for making Muslim community in ways that actively engage with histories and patterns of ethnic settlement in the city rather than being determined by them.

Marxists into Muslims: The Iranian irony

This dissertation examines the influence of Islamic ideology on Iranian Marxists during the 1979 revolution. The purpose of this study is to extricate the influence of Islamic culture, ideology, and terminology on Marxist organizations and on individuals who identified themselves as Marxists in Iran. This is especially of interest since in many ways Marxism and Islam are ideologically in conflict. Were Marxists aware of the influences of Islam in their behavior and ideology? To investigate the irony publications put forth by several Marxist organizations before and after the 1979 revolution were examined. A history of such influence both ideologically and contextually is depicted to demonstrate their political and cultural significance. Through the study of Marxist political organs, theoretical publication and political flyers distributed during and after the revolution, the phenomenon of Marxists converting to an Islamic ideology became clearer. Many Marxist organizations were demonstrably utilizing Islamic political ideology to organize and mobilize masses of Iranians. This study shows a historical precedence of Marxists’ usage of Islam in the political history of Iran dating back to early twentieth-century. Primary and secondary Marxist literature showed that Islam was an inescapable social and political reality for Iranian Marxists. Not only was there a common upbringing but a common enemy fostered provisional collusion between the two. The internalizing the idea of martyrdom—of Shi’a Islam—was a shared belied that united Marxists with Muslins in their attempt to effect sociopolitical change in Iran. Studying Marxist publications shows evidence that many Iranian Marxists were not conscious of using Islamic ethics and terminology since Islamic beliefs are part of the taken-for-granted world of Iranian culture. This contextual belief system, pervasive within the culture and a change of political ideology is what created the conditions for the possibility of Marxists becoming Muslims.

Marxists into Muslims: An Iranian Irony

This dissertation examines the influence of Islamic ideology on Iranian Marxists during the 1979 revolution. The purpose of this study is to extricate the influence of Islamic culture, ideology, and terminology on Marxist organizations and on individuals who identified themselves as Marxists in Iran. This is especially of interest since in many ways Marxism and Islam are ideologically in conflict. Were Marxists aware of the influences of Islam in their behavior and ideology? To investigate the irony publications put forth by several Marxist organizations before and after the 1979 revolution were examined. A history of such influence both ideologically and contextually is depicted to demonstrate their political and cultural significance. Through the study of Marxist political organs, theoretical publication and political flyers distributed during and after the revolution, the phenomenon of Marxists converting to an Islamic ideology became clearer. Many Marxist organizations were demonstrably utilizing Islamic political ideology to organize and mobilize masses of Iranians. This study shows a historical precedence of Marxists’ usage of Islam in the political history of Iran dating back to early twentieth-century. Primary and secondary Marxist literature showed that Islam was an inescapable social and political reality for Iranian Marxists. Not only was there a common upbringing but a common enemy fostered provisional collusion between the two. The internalizing the idea of martyrdom—of Shi’a Islam—was a shared belied that united Marxists with Muslins in their attempt to effect sociopolitical change in Iran. Studying Marxist publications shows evidence that many Iranian Marxists were not conscious of using Islamic ethics and terminology since Islamic beliefs are part of the taken-for-granted world of Iranian culture. This contextual belief system, pervasive within the culture and a change of political ideology is what created the conditions for the possibility of Marxists becoming Muslims.

Basic measurements of radiation from the Baseline Surface Radiation Network (BSRN) in the years 1992 to 2012, reference list of 6378 datasets

In the framework of the global energy balance, the radiative energy exchanges between Sun, Earth and space are now accurately quantified from new satellite missions. Much less is known about the magnitude of the energy flows within the climate system and at the Earth surface, which cannot be directly measured by satellites. In addition to satellite observations, here we make extensive use of the growing number of surface observations to constrain the global energy balance not only from space, but also from the surface. We combine these observations with the latest modeling efforts performed for the 5th IPCC assessment report to infer best estimates for the global mean surface radiative components. Our analyses favor global mean downward surface solar and thermal radiation values near 185 and 342 Wm**-2, respectively, which are most compatible with surface observations. Combined with an estimated surface absorbed solar radiation and thermal emission of 161 Wm**-2 and 397 Wm**-2, respectively, this leaves 106 Wm**-2 of surface net radiation available for distribution amongst the non-radiative surface energy balance components. The climate models overestimate the downward solar and underestimate the downward thermal radiation, thereby simulating nevertheless an adequate global mean surface net radiation by error compensation. This also suggests that, globally, the simulated surface sensible and latent heat fluxes, around 20 and 85 Wm**-2 on average, state realistic values. The findings of this study are compiled into a new global energy balance diagram, which may be able to reconcile currently disputed inconsistencies between energy and water cycle estimates.

Circumpolar Landscape Units, links to GeoTIFFs

Requirements for space based monitoring of permafrost features had been already defined within the IGOS Cryosphere Theme Report at the start of the IPY in 2007 (IGOS, 2007). The WMO Polar Space Task Group (PSTG, http://www.wmo.int/pages/prog/sat/pstg_en.php) identified the need to review the requirements for permafrost monitoring and to update these requirements in 2013. Relevant surveys with focus on satellite data are already available from the ESA DUE Permafrost User requirements survey (2009), the United States National Research Council (2014) and the ESA - CliC - IPA - GTN -P workshop in February 2014. These reports have been reviewed and specific needs discussed within the community and a white paper submitted to the WMO PSTG. Acquisition requirements for monitoring of especially terrain changes (incl. rock glaciers and coastal erosion) and lakes (extent, ice properties etc.) with respect to current satellite missions have been specified. About 50 locations ('cold spots') where permafrost (Arctic and Antarctic) in situ monitoring has been taking place for many years or where field stations are currently established have been identified. These sites have been proposed to the WMO Polar Space Task Group as focus areas for future monitoring by high resolution satellite data. The specifications of these sites including meta-data on site instrumentation have been published as supplement to the white paper (Bartsch et al. 2014, doi:10.1594/PANGAEA.847003). The representativity of the 'cold spots' around the arctic has been in the following assessed based on a landscape units product which has been developed as part of the FP7 project PAGE21. The ESA DUE Permafrost service has been utilized to produce a pan-arctic database (25km, 2000-2014) comprising Mean Annual Surface Temperature, Annual and summer Amplitude of Surface Temperature, Mean Summer (July-August) Surface Temperature. Surface status (frozen/unfrozen) related products have been also derived from the ESA DUE Permafrost service. This includes the length of unfrozen period, first unfrozen day and first frozen day. In addition, SAR (ENVISAT ASAR GM) statistics as well as topographic parameters have been considered. The circumpolar datasets have been assessed for their redundancy in information content. 12 distinct units could be derived. The landscape units reveal similarities between North Slope Alaska and the region from the Yamal Peninsula to the Yenisei estuary. Northern Canada is characterized by the same landscape units like western Siberia. North-eastern Canada shows similarities to the Laptev coast region. This paper presents the result of this assessment and formulates recommendations for extensions of the in situ monitoring networks and categorizes the sites by satellite data requirements (specifically Sentinels) with respect to the landscape type and related processes.

Directional wave measurements using the Offshore Sensing Sailbuoy, link to MATLAB file

An autonomous vessel, the Offshore Sensing Sailbuoy, was used for wave measurements near the Ekofisk oil platform complex in the North Sea (56.5 N, 3.2 E, operated by ConocoPhilllips) from 6 to 20 November 2015. Being 100% wind propelled, the Sailbuoy has two-way communication via the Iridium network and has the capability for missions of six months or more. It has previously been deployed in the Arctic, Norwegian Sea and the Gulf of Mexico, but this was the first real test for wave measurements. During the campaign it held position about 20km northeast of Ekofisk (on the lee side) during rough conditions. Mean wind speed measured at Ekofisk during the campaign was near 9.8m/s, with a maximum of 20.4m/s, with wind mostly from south and south west. A Datawell MOSE G1000 GPS based 2Hz wave sensor was mounted on the Sailbuoy. Mean significant wave height (Hs 1hr) measured was 3m, whereas maximum Hs was 6m. Mean wave period was 7.7s, while maximum wave height, Hmax, was 12.6m. These measurements have been compared with non-directional Waverider observations at the Ekofisk complex. Mean Hs at Ekofisk was 3.1m, while maximum Hs was 6.5m. Nevertheless, the correlation between the two measurements was high (97%). Spectra comparison was also good, except for low Hs (~1m), where the motion of the vessel seemed to influence the measurements. Nevertheless, the Sailbuoy performed well during this campaign, and results suggests that it is a suitable platform for wave measurements in rather rough sea conditions.

RELIGIOUS SCULPTURE OF THE CHILOÉ ARCHIPELAGO, FROM THE 17TH TO THE 21ST CENTURY

Despite its central role in religious life of the region, the sculptural tradition of the Southern Chilean Chiloé Archipelago, ranging from the 17th century to the present day, has been vastly understudied. Isidoro Vázquez de Acuña’s 1994 volume Santeria de Chiloe: ensayo y catastro remains the only catalogue of Chilote sculpture. Though the author includes photographs of a vast array of works, he does not attempt to place the sculptures within a chronology, or consider their place within the greater Latin American context. My thesis will place this group of works within a chronological and geographical context that reaches from the 16th century to the present day, connected to the artistic traditions of regions as far afield as Paraguay and Lima. I will first consider the works brought to the Archipelago by religious orders – the Jesuits and Franciscans – as well as influences on artistic style and religious culture throughout the 17th, 18th and 19th centuries. I will focus in particular on three works generally considered to be from the 17th and 18th centuries – the Virgin of Loreto at Achao, the Saint Michael at Castro, and the Jesus Nazareno of Caguach – using visual analysis and sifting through generations of primary and secondary sources to determine from where and when these sculptures came. With this investigation as a foundation, I will consider how they inspired vernacular sculptural expression and trace ‘family trees’ of vernacular works based on these precedents. Vernacular artistic traditions are often viewed as derivative and lacking in skill, but Chilote sculptors in fact engaged with a variety of outside influences and experimented with different sculptural styles. I will conclude by considering which aspects of these styles Chilote artists chose to incorporate into their own work, alter or exclude, artistic decisions that shed light on the Archipelago’s religious and cultural fabric.

Public narratives and the construction of memory among European Muslims

This chapter draws on group and individual interviews with 735 European Muslims in 5 European countries and explores some key aspects of the politics of memory that form an inextricable component of European Muslim self-definitions, discourses and narratives deployed in the attempt to negotiate their inclusion in European societies.

Introducing "Fourth Space" : Young Muslims Negotiating Marriage in Europe

Based on interviews with young persons in two national Muslim youth organizations in Europe, this article examines how young Muslims negotiate between the cultural customs of their societiesof origin, their everyday experiences in Europe, and the global Muslim public sphere. In seekinga universal “true” core of Islam, these young persons create their own version of Islam, a “fourthspace” in which they reinterpret the authoritative source texts of Islam in light of personal diasporicexperiences in Europe. This reinterpretation becomes particularly pertinent in the context of planningfor future marriage, where they jointly construct new understandings of Islam to argue for inter-ethnic marriages and later age at marriage, to argue against coercion in arranged marriages, tooppose polygyny and to portray the stigmatization of divorce as counter to the true spirit of Islam.

Reconstructing identity: A study of new Muslims in São Paulo, Brazil

This paper will address questions of identity that male Muslim converts in São Paulo, Brazil face after adopting Islam. Specifically, it will analyze how they place their religion into notions of what it means to be Brazilian. Furthermore, this paper will show how many of these converts use Islam as a way to reconstruct their personal identities. Finally, it will argue that by becoming Muslims, they embrace a transnational religious identity. This paper will seek to show how conversion to Islam in São Paulo can significantly influence how individuals articulate notions of Brazilian national identity and belonging to the nation.

Design of passive methane oxidation biosystems considering their response to the presence of capillary barrier effect

La construction des biosystèmes d’oxydation passive du méthane (BOPM) est une option économique et durable pour réduire les émissions de méthane des sites d’enfouissement de déchets et des effets subséquents du réchauffement climatique. Les BOPM sont constitués de deux couches principales: la couche d'oxydation du méthane (MOL) et la couche de distribution du gaz (GDL). L'oxydation du méthane se produit dans la MOL par les réactions biochimiques des bactéries méthanotrophes, et la GDL est construite sous la MOL pour intercepter et distribuer les émissions fugitives de biogaz à la base de la MOL. Fondamentalement, l'efficacité d'un BOPM est définie en fonction de l'efficacité d'oxydation du méthane dans la MOL. Par conséquent, il est indispensable de fournir des conditions adéquates pour les activités bactériennes des méthanotrophes. En plus des paramètres environnementaux, l'intensité et la distribution du biogaz influencent l'efficacité des BOPM, et ils peuvent rendre le matériau de la MOL - avec une grande capacité d'accueillir les activités bactériennes - inutilisables en termes d'oxydation du méthane sur place. L'effet de barrière capillaire le long de l'interface entre la GDL et la MOL peut provoquer des émissions localisées de méthane, due à la restriction ou la distribution non uniforme de l’écoulement ascendant du biogaz à la base de la MOL. L'objectif principal de cette étude est d'incorporer le comportement hydraulique non saturé des BOPM dans la conception des BOPM, afin d’assurer la facilité et la distribution adéquates de l'écoulement du biogaz à la base de la MOL. Les fonctions de perméabilité à l'air des matériaux utilisés pour construire la MOL des BOPM expérimentaux au site d’enfouissement des déchets de St Nicéphore (Québec, Canada), ainsi que celles d'autres de la littérature technique, ont été étudiés pour évaluer le comportement d'écoulement non saturé du gaz dans les matériaux et pour identifier le seuil de migration sans restriction du gaz. Ce dernier seuil a été introduit en tant que un paramètre de conception avec lequel le critère de conception recommandé ici, c’est à dire la longueur de la migration sans restriction de gaz (LMSG), a été défini. La LMSG est considérée comme la longueur le long de l'interface entre la GDL et la MOL où le biogaz peut migrer à travers la MOL sans restriction. En réalisant des simulations numériques avec SEEP/W, les effets de la pente de l'interface, des paramètres définissant la courbe de rétention d'eau, de la fonction de la conductivité hydraulique du matériau de la MOL sur la valeur de la LMSG (représentant la facilité d'écoulement du biogaz à l'interface) et de la distribution de l'humidité (et par conséquent celle du biogaz) ont été évalués. Selon les résultats des simulations, la conductivité hydraulique saturée et la distribution des tailles de pores du matériau de la MOL sont les paramètres les plus importants sur la distribution de l'humidité le long de l'interface. Ce dernier paramètre influe également sur la valeur du degré de saturation et donc la facilité du biogaz à la base de la MOL. La densité sèche du matériau de MOL est un autre paramètre qui contrôle la facilité d'écoulement ascendant du biogaz. Les limitations principales de la présente étude sont associées au nombre de matériaux de MOL testés et à l'incapacité de SEEP/W de considérer l'évapotranspiration. Toutefois, compte tenu des hypothèses raisonnables dans les simulations et en utilisant les données de la littérature, on a essayé de réduire ces limitations. En utilisant les résultats des expériences et des simulations numériques, des étapes et des considérations de conception pour la sélection du matériau de MOL et de la pente d'interface ont été proposées. En effet,le comportement hydraulique non saturé des matériaux serait intégré dans les nécessités de conception pour un BOPM efficace, de sorte que la capacité maximale possible d'oxydation du méthane du matériau de la MOL soit exploitée.

How essential are Argo observations to constrain a global ocean data assimilation system?

Observing system experiments (OSEs) are carried out over a 1-year period to quantify the impact of Argo observations on the Mercator Ocean 0.25° global ocean analysis and forecasting system. The reference simulation assimilates sea surface temperature (SST), SSALTO/DUACS (Segment Sol multi-missions dALTimetrie, d'orbitographie et de localisation précise/Data unification and Altimeter combination system) altimeter data and Argo and other in situ observations from the Coriolis data center. Two other simulations are carried out where all Argo and half of the Argo data are withheld. Assimilating Argo observations has a significant impact on analyzed and forecast temperature and salinity fields at different depths. Without Argo data assimilation, large errors occur in analyzed fields as estimated from the differences when compared with in situ observations. For example, in the 0–300 m layer RMS (root mean square) differences between analyzed fields and observations reach 0.25 psu and 1.25 °C in the western boundary currents and 0.1 psu and 0.75 °C in the open ocean. The impact of the Argo data in reducing observation–model forecast differences is also significant from the surface down to a depth of 2000 m. Differences between in situ observations and forecast fields are thus reduced by 20 % in the upper layers and by up to 40 % at a depth of 2000 m when Argo data are assimilated. At depth, the most impacted regions in the global ocean are the Mediterranean outflow, the Gulf Stream region and the Labrador Sea. A significant degradation can be observed when only half of the data are assimilated. Therefore, Argo observations matter to constrain the model solution, even for an eddy-permitting model configuration. The impact of the Argo floats' data assimilation on other model variables is briefly assessed: the improvement of the fit to Argo profiles do not lead globally to unphysical corrections on the sea surface temperature and sea surface height. The main conclusion is that the performance of the Mercator Ocean 0.25° global data assimilation system is heavily dependent on the availability of Argo data.