Sinterização de aço inoxidável reforçado com partículas nanométricas dispersas de carbeto de nióbio - NbC

Metal powder sintering appears to be promising option to achieve new physical and mechanical properties combining raw material with new processing improvements. It interest over many years and continue to gain wide industrial application. Stainless steel is a widely accepted material because high corrosion resistance. However stainless steels have poor sinterability and poor wear resistance due to their low hardness. Metal matrix composite (MMC) combining soft metallic matrix reinforced with carbides or oxides has attracted considerable attention for researchers to improve density and hardness in the bulk material. This thesis focuses on processing 316L stainless steel by addition of 3% wt niobium carbide to control grain growth and improve densification and hardness. The starting powder were water atomized stainless steel manufactured for Höganäs (D 50 = 95.0 μm) and NbC produced in the UFRN and supplied by Aesar Alpha Johnson Matthey Company with medium crystallite size 16.39 nm and 80.35 nm respectively. Samples with addition up to 3% of each NbC were mixed and mechanically milled by 3 routes. The route1 (R1) milled in planetary by 2 hours. The routes 2 (R2) and 3 (R3) milled in a conventional mill by 24 and 48 hours. Each milled samples and pure sample were cold compacted uniaxially in a cylindrical steel die (Ø 5 .0 mm) at 700 MPa, carried out in a vacuum furnace, heated at 1290°C, heating rate 20°C stand by 30 and 60 minutes. The samples containing NbC present higher densities and hardness than those without reinforcement. The results show that nanosized NbC particles precipitate on grain boundary. Thus, promote densification eliminating pores, control grain growth and increase the hardness values

Caracterización microestructural y fisicoquímica de las partículas suspendidas totales (PST) colectadas en un punto de la ciudad de Monterrey.

En este proyecto de tesis se presentan los resultados de la carectización microestructural morfológica y composición fisicoquímica de las partículas suspendidas totales (PST) colectadas en la cuidad de Monterrey.

Identificación de Parámetros Borrosos para el Control de Suspensión Activa mediante Enjambre de Partículas

El artículo aborda la identificación de parámetros borrosos mediante técnicas de optimización de enjambre de partículas (PSO) y su aplicación al control de un sistema de suspensión activa. En particular, se adopta un controlador de tipo Takagi-Sugeno de orden cero con partición diifusa estándar de sus antecedentes. A diferencia de trabajos previos, donde el aprendizaje se limitaba a los parámetros de escala del control, el método propuesto permite la optimización de los conjuntos borrosos de los antecedentes. La metodología propuesta se ha experimentado con éxito sobre un sistema físico de un cuarto de vehículo.

Metodologia para avaliação de cinemática de partículas gasosas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo

Many challenges have been presented in petroleum industry. One of them is the preventing of fluids influx during drilling and cementing. Gas migration can occur as result of pressure imbalance inside the well when well pressure becomes lower than gas zone pressure and in cementing operation this occurs during cement slurry transition period (solid to fluid). In this work it was developed a methodology to evaluate gas migration during drilling and cementing operations. It was considered gel strength concept and through experimental tests determined gas migration initial time. A mechanistic model was developed to obtain equation that evaluates bubble displacement through the fluid while it gels. Being a time-dependant behavior, dynamic rheological measurements were made to evaluate viscosity along the time. For drilling fluids analyzed it was verified that it is desirable fast and non-progressive gelation in order to reduce gas migration without affect operational window (difference between pore and fracture pressure). For cement slurries analyzed, the most appropriate is that remains fluid for more time below critical gel strength, maintaining hydrostatic pressure above gas zone pressure, and after that gels quickly, reducing gas migration. The model developed simulates previously operational conditions and allow changes in operational and fluids design to obtain a safer condition for well construction

Modelagem matemática para o transporte de partículas sujeitas a múltiplos mecanismos de retenção

Discrepancies between classical model predictions and experimental data for deep bed filtration have been reported by various authors. In order to understand these discrepancies, an analytic continuum model for deep bed filtration is proposed. In this model, a filter coefficient is attributed to each distinct retention mechanism (straining, diffusion, gravity interception, etc.). It was shown that these coefficients generally cannot be merged into an effective filter coefficient, as considered in the classical model. Furthermore, the derived analytic solutions for the proposed model were applied for fitting experimental data, and a very good agreement between experimental data and proposed model predictions were obtained. Comparison of the obtained results with empirical correlations allowed identifying the dominant retention mechanisms. In addition, it was shown that the larger the ratio of particle to pore sizes, the more intensive the straining mechanism and the larger the discrepancies between experimental data and classical model predictions. The classical model and proposed model were compared via statistical analysis. The obtained p values allow concluding that the proposed model should be preferred especially when straining plays an important role. In addition, deep bed filtration with finite retention capacity was studied. This work also involves the study of filtration of particles through porous media with a finite capacity of filtration. It was observed, in this case, that is necessary to consider changes in the boundary conditions through time evolution. It was obtained a solution for such a model using different functions of filtration coefficients. Besides that, it was shown how to build a solution for any filtration coefficient. It was seen that, even considering the same filtration coefficient, the classic model and the one here propposed, show different predictions for the concentration of particles retained in the porous media and for the suspended particles at the exit of the media

Retalho de reposicionamento coronal vs.técnica de tunelização para recobrimento radicular

Introdução: Ao longo da última década a procura por um sorriso estético (inclui harmonia e continuidade de forma) transformou-se numa preocupação relevante na Medicina Dentária e em particular nos tratamentos periodontais. As recessões gengivais com as consequentes exposições radiculares e alteração morfológica dos tecidos periodontais, podem constituir um problema estético importante podendo trazer outros problemas associados. Objetivo: O objetivo deste trabalho é identificar qual a técnica cirúrgica mais vantajosa para recobrimento radicular (RRC, RRC com ETC e TUN) e saber em que situações uma poderá ser melhor escolha que a outra, sabendo que ambas são técnicas de alta fiabilidade. Materiais e métodos: Para o cumprimento do objetivo, foi desenvolvida uma pesquisa entre Junho e Setembro de 2016, de artigos em português e inglês, sem limites temporais, recorrendo às bases de dados electrónicas: PUBMED e Google Académico utilizando para o efeito as seguintes “palavras-chave”: “tunnel technique”, “microsurgery”, “recession coverage”, “connective tissue graft”, “coronally advanced flap”, “coronally advanced flap vs. tunnel technique”. Foram utilizados 40 artigos científicos e duas obras literárias (Clinical Periodontology and Implant Dentistry e Plastic-Esthetic Periodontal and Implant Surgery) para complementar o tema. Conclusão: Segundo a literatura publicada e consultada, os procedimentos mais eficazes são aqueles que utilizam enxertos de tecido conjuntivo para o aumento da espessura gengival. Sendo que comparando as duas técnicas Retalho de Reposicionamento Coronal e Técnica de Tunelização, a segunda leva vantagem em relação à primeira, uma vez que, necessitando de menos incisões trará aspetos positivos quanto à cicatrização pois permite maior aporte sanguíneo, além de haver uma preservar das papilas.

Manobras inadequadas e complicações da RCP

O objeto inicia evidenciando algumas manobras inadequadas, comuns na práticas diárias e destaca a importância de todos os profissionais de saúde da família estejam atentos sobre essas manobras inadequadas a fim de auxiliar os colegas de equipe e evitando complicações futuras para a vítima como: fratura de costelas, pneumotórax, embolia gordurosa, rotura hepática. Na sequencia alerta que Para se obter êxito em uma reanimação, e na preservação da vida e do cérebro da vítima de uma PCR, é preciso que estejamos atentos a distensão gástrica, vômitos, lesões resultantes das compressões no peito, dentaduras, dentes quebrados ou soltos na boca e como e quando interromper o socorro ou quando não iniciar o RCP. Para finalizar, alerta que a prioridade no atendimento é ligar para o 192 ou 193, e usar um desfibrilador externo automático (DEA). Unidade 2 do módulo 15 que compõe o Curso de Especialização em Saúde da Família.

Aerodinâmica de leitos vibrofluidizados: uma revisão

Application of mechanical vibration to aid fluidization and to improve heat, mass and momentum transfer are usual processes in agricultural industry and it has found nowadays extensive applications in particle processing of materials difficult-to-fluidized. Equations and experimental data found in literature for the aerodynamics characteristics of vibro-fluidized beds are presented and discussed, emphasizing the vibration effect in the bed.

Atributos mecânicos e erosão por salpicamento em amostras de latossolo vermelho-amarelo sob efeito de vinhaça

The objective of this study was to quantify the effect of plonk on compressive behavior and mechanical attributes such as consistency, optimum moisture for compaction and maximum density of a Red-Yellow Latosol (Oxisol) to evaluate the effect of plonk and compaction state in splashed particles, from Lavras (MG) region. The plonk was obtained from an artisanal sugarcane brandy alembic. Undisturbed and disturbed soil samples were collected at 0 to 3 cm and 60 to 63 cm depths. Disturbed soil samples were used for soil characterization, determination of consistence limits and Normal Proctor essay after material incubation with plonk. Undisturbed soil samples were saturated with plonk or distilled water (control) during 48 hours for testing the compressibility and resistance to splash by using simulated rainfall. The plonk altered the consistence limits of studied layers. For the 0-3 cm layer, the plonk reduced the friable range, and for the 60-63 cm layer the effect was in the opposite direction. For both layers, the plonk increased Dmax and decreased Uoptimum. Regardless of the plonk treatment, both layers presented the same load support capacity. The compaction degree of samples influenced the splash erosion. The increase of the applied pressure over the samples resulted in increase of splash material quantity. At the 60-63 cm layer, the plonk treatment reduced the splash material quantity by increasing the applied pressure, mainly when the samples were at field capacity.

Metabolismo de lipoproteinas plasmaticas em fumantes cronicos sob o efeito agudo do fumo

Universidade Estadual de Campinas . Faculdade de Educação Física

A recreação/lazer e a educação fisica : a manobra da autenticidade do jogo

Universidade Estadual de Campinas. Faculdade de Educação Física

Respostas cardiorrespiratorias ao exercicio fisico dinamico e função autonomica em primigestas

Universidade Estadual de Campinas . Faculdade de Educação Física

Metodologia para analise da movimentação da caixa toracica durante a respiração

Universidade Estadual de Campinas . Faculdade de Educação Física

Management of a complex dentoalveolar trauma: a case report

This paper describes the case of a 12-year-old male patient who presented a severe lateral luxation of the maxillary central incisors due to a bicycle fall. Treatment involved suture of the soft tissues lacerations, and repositioning and splinting of the injured teeth, followed by endodontic treatment and periodontal surgery. After a 2-year follow-up, clinical and radiographic evaluation revealed that the incisors presented satisfactory esthetic and functional demands.