Morphogenesis in guinea grass pastures under rotational grazing strategies

This study was conducted in order to evaluate the morphogenetic and structural characteristics of guinea grass cv. Mombasa under three post-grazing heights (intense - 30 cm, lenient - 50 cm and variable - 50 in spring-summer and 30 cm in autumn-winter) when sward light interception reached 95% during regrowth. Post-grazing heights were allocated to experimental units (0.25 ha) in a completely randomized block design with three replications. Post-grazing heights affected only leaf elongation rate and the number of live leaves. Pastures managed with variable post-grazing height showed higher leaf elongation rate in the summer of 2007. This management strategy also resulted in a higher number of live leaves. During the spring of 2006, plants showed lower leaf elongation rate, leaf appearance rate and number of live leaves, and greater phyllochron and leaf lifespan. In contrast, during the summer of 2007, the leaf appearance rate, leaf elongation rate, number of live leaves, and final leaf length were greater while phyllochron, stem elongation rate, and leaf senescence rate were lower. The management of the guinea grass cv. Mombasa with intense or variable post-grazing height throughout the year seems to represent an interesting management target, in terms of leaf appearance rate and number of live leaves.

Coronoid process hyperplasia: an unusual cause of mandibular hypomobility

A large number of disorders affecting the masticatory system can cause restriction of mouth opening. The most common conditions related to this problem are those involving the temporomandibular joint (TMJ) and the masticatory muscles, when facial pain also is an usual finding. Congenital or developmental mandibular disorders are also possible causes for mouth opening limitation, although in a very small prevalence. Coronoid process hyperplasia (CPH) is an example of these cases, characterized by an excessive coronoid process growing, where mandibular movements become limited by the impaction of this structure on the posterior portion of the zygomatic bone. This condition is rare, painless, usually bilateral and progressive, affecting mainly men. Diagnosis of CPH is made based on clinical signs of mouth opening limitation together with imaging exams, especially panoramic radiography and computerized tomography (CT). Treatment is exclusively surgical. This paper presents a case of a male patient with bilateral coronoid process hyperplasia, initially diagnosed with bilateral disk displacement without reduction, and successfully treated with intraoral coronoidectomy. It is emphasized the importance of differential diagnosis for a correct diagnosis and, consequently, effective management strategy.

Tecniche di progettazione tollerante alle variazioni per circuiti digitali in tecnologie nanometriche

The digital electronic market development is founded on the continuous reduction of the transistors size, to reduce area, power, cost and increase the computational performance of integrated circuits. This trend, known as technology scaling, is approaching the nanometer size. The lithographic process in the manufacturing stage is increasing its uncertainty with the scaling down of the transistors size, resulting in a larger parameter variation in future technology generations. Furthermore, the exponential relationship between the leakage current and the threshold voltage, is limiting the threshold and supply voltages scaling, increasing the power density and creating local thermal issues, such as hot spots, thermal runaway and thermal cycles. In addiction, the introduction of new materials and the smaller devices dimension are reducing transistors robustness, that combined with high temperature and frequently thermal cycles, are speeding up wear out processes. Those effects are no longer addressable only at the process level. Consequently the deep sub-micron devices will require solutions which will imply several design levels, as system and logic, and new approaches called Design For Manufacturability (DFM) and Design For Reliability. The purpose of the above approaches is to bring in the early design stages the awareness of the device reliability and manufacturability, in order to introduce logic and system able to cope with the yield and reliability loss. The ITRS roadmap suggests the following research steps to integrate the design for manufacturability and reliability in the standard CAD automated design flow: i) The implementation of new analysis algorithms able to predict the system thermal behavior with the impact to the power and speed performances. ii) High level wear out models able to predict the mean time to failure of the system (MTTF). iii) Statistical performance analysis able to predict the impact of the process variation, both random and systematic. The new analysis tools have to be developed beside new logic and system strategies to cope with the future challenges, as for instance: i) Thermal management strategy that increase the reliability and life time of the devices acting to some tunable parameter,such as supply voltage or body bias. ii) Error detection logic able to interact with compensation techniques as Adaptive Supply Voltage ASV, Adaptive Body Bias ABB and error recovering, in order to increase yield and reliability. iii) architectures that are fundamentally resistant to variability, including locally asynchronous designs, redundancy, and error correcting signal encodings (ECC). The literature already features works addressing the prediction of the MTTF, papers focusing on thermal management in the general purpose chip, and publications on statistical performance analysis. In my Phd research activity, I investigated the need for thermal management in future embedded low-power Network On Chip (NoC) devices.I developed a thermal analysis library, that has been integrated in a NoC cycle accurate simulator and in a FPGA based NoC simulator. The results have shown that an accurate layout distribution can avoid the onset of hot-spot in a NoC chip. Furthermore the application of thermal management can reduce temperature and number of thermal cycles, increasing the systemreliability. Therefore the thesis advocates the need to integrate a thermal analysis in the first design stages for embedded NoC design. Later on, I focused my research in the development of statistical process variation analysis tool that is able to address both random and systematic variations. The tool was used to analyze the impact of self-timed asynchronous logic stages in an embedded microprocessor. As results we confirmed the capability of self-timed logic to increase the manufacturability and reliability. Furthermore we used the tool to investigate the suitability of low-swing techniques in the NoC system communication under process variations. In this case We discovered the superior robustness to systematic process variation of low-swing links, which shows a good response to compensation technique as ASV and ABB. Hence low-swing is a good alternative to the standard CMOS communication for power, speed, reliability and manufacturability. In summary my work proves the advantage of integrating a statistical process variation analysis tool in the first stages of the design flow.

Life cycle assessment in construction field: A life cycle cost analysis of reinforcement concrete bridge

The present work is included in the context of the assessment of sustainability in the construction field and is aimed at estimating and analyzing life cycle cost of the existing reinforced concrete bridge “Viadotto delle Capre” during its entire life. This was accomplished by a comprehensive data collection and results evaluation. In detail, the economic analysis of the project is performed. The work has investigated possible design alternatives for maintenance/rehabilitation and end-of-life operations, when structural, functional, economic and also environmental requirements have to be fulfilled. In detail, the economic impact of different design options for the given reinforced concrete bridge have been assessed, whereupon the most economically, structurally and environmentally efficient scenario was chosen. The Integrated Life-Cycle Analysis procedure and Environmental Impact Assessment were also discussed in this work. The scope of this thesis is to illustrate that Life Cycle Cost analysis as part of Life Cycle Assessment approach could be effectively used to drive the design and management strategy of new and existing structures. The final objective of this contribution is to show how an economic analysis can influence decision-making in the definition of the most sustainable design alternatives. The designers can monitor the economic impact of different design strategies in order to identify the most appropriate option.

[Swiss clinical practice guidelines for skin cancer in organ transplant recipients]

Swiss clinical practice guidelines for skin cancer in organ transplant recipients Transplant patients have increased over the last decades. As a consequence of long-term immunosuppression, skin cancer, in particular squamous cell carcinoma (SCC), has become an important problem. Screening and education of potential organ transplant recipients (OTRs) regarding prevention of sun damage and early recognition of skin cancer are important before transplantation. Once transplanted, OTRs should be seen yearly by a dermatologist to ensure compliance with sun avoidance as well as for treatment of precancerosis and SCC. Early removal is the best treatment for SCC. Reduction of immunosuppression, switch to mTOR inhibitors and chemoprevention with acitretin may reduce the incidence of SCC. The dermatological follow-up of OTRs should be integrated into a comprehensive post-transplant management strategy.

Long-term budesonide maintenance treatment is partially effective for patients with eosinophilic esophagitis

BACKROUND ; AIMS: Topical corticosteroids are effective in inducing clinical and histologic remission in patients with eosinophilic esophagitis (EoE). However, the best long-term management strategy for this chronic inflammatory disease has not been determined.

"The need obliged us" : culture as capacity during the Hurricane Stan emergency response. A case study from Tectitan, Huehuetenango, Guatemala

A major deficiency in disaster management plans is the assumption that pre-disaster civil-society does not have the capacity to respond effectively during crises. Following from this assumption a dominant emergency management strategy is to replace weak civil-society organizations with specialized disaster organizations that are often either military or Para-military and seek to centralize decision-making. Many criticisms have been made of this approach, but few specifically addresses disasters in the developing world. Disasters in the developing world present unique problems not seen in the developed world because they often occur in the context of compromised governments, and marginalized populations. In this context it is often community members themselves who possess the greatest capacity to respond to disasters. This paper focuses on the capacity of community groups to respond to disaster in a small town in rural Guatemala. Key informant interviews and ethnographic observations are used to reconstruct the community response to the disaster instigated by Hurricane Stan (2005) in the municipality of Tectitán in the Huehuetenango department. The interviews were analyzed using techniques adapted from grounded theory to construct a narrative of the events, and identify themes in the community’s disaster behavior. These themes are used to critique the emergency management plans advocated by the Guatemalan National Coordination for the Reduction of Disasters (CONRED). This paper argues that CONRED uncritically adopts emergency management strategies that do not account for the local realities in communities throughout Guatemala. The response in Tectitán was characterized by the formation of new organizations, whose actions and leadership structure were derived from “normal” or routine life. It was found that pre-existing social networks were resilient and easily re-oriented meet the novel needs of a crisis. New or emergent groups that formed during the disaster utilized social capital accrued by routine collective behavior, and employed organizational strategies derived from “normal” community relations. Based on the effectiveness of this response CONRED could improve its emergency planning on the local-level by utilizing the pre-existing community organizations rather than insisting that new disaster-specific organizations be formed.

Combined cardiac and lung volume reduction surgery

Coronary artery disease is prevalent in patients who have severe emphysema and who are being considered for lung volume reduction surgery (LVRS). Significant valvular heart diseases may also coexist in these patients. Few thoracic surgeons have performed LVRS in patients who have severe cardiac diseases. Conversely, few cardiac surgeons have been willing to undertake major cardiac surgery in patients who have severe emphysema. This report reviews the evidence regarding combined cardiac surgery and LVRS to determine the optimal management strategy for patients who have severe emphysema and who are suitable for LVRS, but who also have coexisting significant cardiac diseases that are operable.

Assessing the effectiveness of a long-standing rocky intertidal protected area and its contribution to the regional conservation of species, habitats and assemblages

1. The acceptance of reserves as a useful management strategy relies on evidence of their effectiveness in preserving stocks of harvested species and conserving biodiversity. A history of ad hoc decisions in terrestrial and marine protected area planning has meant that many of these areas are contributing inefficiently to conservation goals. The conservation value of existing protected areas should be assessed when planning the placement of additional areas in a reserve network. 2. This study tested (1) the effectiveness of protection for intertidal molluscs of a marine reserve (Bouddi Marine Extension, NSW, Australia) established in 1971, and (2) the contribution of the protected area to the conservation of regional species, assemblages, and habitats. 3. The shell length and population density of one harvested (Cellana tramoserica), and three non-harvested species (Bembicium nanum, Morula marginalba, Nerita atramentosa) of intertidal molluscs were examined in the protected area and two reference locations over two seasons. 4. The heavily collected limpet C. tramoserica was significantly larger in the protected area and was the only species to exhibit a significant difference. No species significantly differed in population density between the protected area and reference locations. 5. Temporally replicated surveys of macro-molluscs at 21 locations over 75km of coastline identified that the existing protected area included 50% of species, two of five assemblage types and 19 of 20 intertidal rocky shore habitats surveyed in the study region. Reservation of a further three rocky reefs would protect a large proportion of species (71%), a representative of each assemblage and all habitat types. 6. Despite originally being selected in the absence of information on regional biodiversity, the protected area is today an effective starting point for expansion to a regional network of intertidal protected areas.

Mechanical antithrombotic intervention by LAA occlusion in atrial fibrillation

Stroke in patients with atrial fibrillation (AF) is often associated with substantial morbidity and mortality. Oral anticoagulation remains the first-line approach to stroke prevention in such individuals; however, for a considerable proportion of patients, traditional treatment using warfarin is limited by a number of factors, such as the inconvenience of frequent therapeutic monitoring and the risk of haemorrhage. The development of new oral anticoagulants with improved efficacy and safety profiles has provided viable options for oral anticoagulation therapy in patients with nonvalvular (nonrheumatic AF). Nonetheless, in patients who have an increased risk of major haemorrhage, a nonpharmacological approach to antithrombotic therapy remains an attractive alternative. The left atrial appendage (LAA) has been found to be the source of >90% of thrombi in patients with nonvalvular AF; thus, prevention of thrombus formation via transcatheter mechanical LAA occlusion is a novel therapeutic target for stroke prevention in this patient population. In this Review, we present the rationale for LAA occlusion in patients with AF, the available occlusion devices and their clinical evidence to date. We also discuss the roles of various imaging techniques in device implantation and the management strategy for associated procedural complications.

Environmental, health and safety cost benefit analysis in the United States chemical industry

The purpose of this research project is to determine whether there is a cost/benefit to allocating financial and other company-related resources to improve environmental, health and safety performance beyond that which is required by law. The issue of whether a company benefits from spending dollars to achieve environmental, health and safety performance beyond legal compliance is an important issue to the chemical manufacturing industry in the United States because of the voluminous and complex legal requirements impacting environmental, health and safety expenditures. The cost/benefit issue has practical significance because many U.S. chemical manufacturing companies base their environmental, health and safety management strategies on just achieving and maintaining compliance with legal requirements when in reality this strategy may actually be a higher cost way of managing environmental, health and safety practices. This difference in environmental, health and safety management strategy is being investigated to determine if managing environmental, health and safety to achieve performance beyond that which is required by law results in a greater benefit to companies in the U.S. chemical manufacturing sector.