952 resultados para Low-resistance contacts
Resumo:
Soil water availability is the main cause of reduced productivity, and the early development period most sensitive to water deficit. This study aimed to evaluate the drought resistance of the varieties of sugar-cane RB867515 and SP81-3250 during the early development using different levels of water deficit on four soil depths. The experiment was conducted at the Department of Biosystems at Escola Superior de Agricultura "Luiz de Queiroz" (ESALQ/USP) in a greenhouse in soil classified as Oxisol, sandy loam texture (Series "Sertãozinho"). Once exhausted the level of available water in the soil, the dry strength of the studied strains are relatively low. Water balance with values less than -13 mm cause a significant decrease in the final population of plants, regardless of the variety, and values below -35 mm, leads to the death of all plants.
Resumo:
PURPOSE: To compare two single-agent chemotherapy (ChT) regimens evaluating, in first-line treatment, response and side effects and, in final single-agent treatment, the outcomes, among Brazilian patients with low-risk gestational trophoblastic neoplasia (GTN), according to International Federation of Gynecology and Obstetrics (FIGO) 2002. METHODS: Retrospective analysis of two concurrent cohorts with 194 low-risk GTN patients: from 1992 to 2012, as first-line treatment, 115 patients received 4 intramuscular doses of methotrexate alternated with 4 oral doses of folinic acid (MTX/FA) repetead every 14 days and, since 1996, 79 patients received an endovenous bolus-dose of actinomycin D (Act-D), biweekly. At GTN diagnosis, patient opinion was taken into consideration when defining the initial single-agent ChT regimen, and when there was resistance or toxicity to one regimen, the other drug was used preferentially. This study was approved by the Irmandade da Santa Casa de Misericórdia de Porto Alegre Ethical Committee. RESULTS: Both groups were clinically similar (p>0.05). In first-line treatments, frequency of complete response was similar (75.7% with MTX/FA and 67.1% with bolus Act-D); the number of ChT courses -median 3 (range: 1-10) with MTX/FA and 2 (range: 1-6) with bolus Act-D - and the time to remission -median 9 weeks (range: 2-16) with MTX/FA and 10 weeks (range: 2-16) with bolus Act-D) - were not different between the groups. In both groups, first-line side effects frequency were high but intensity was low; stomatitis was higher with MTX/FA (p<0.01) and nausea and vomit with Act-D (p<0.01). Final single-agent ChT responses were high in both groups (94.8% with MTX/FA and 83.5% with bolus Act-D; p<0.01) and 13% higher in the group initially treated with MTX/FA. Rates of hysterectomy and of GTN recurrence were low and similar. No patient died due to GTN. CONCLUSION: The two regimens had similar first-line ChT response. Final single-agent response rates were high and similar in both groups but the final single-agent remission rate was higher in the MTX/FA group.
Resumo:
Permanent magnet generators (PMG) represent the cutting edge technology in modern wind mills. The efficiency remains high (over 90%) at partial loads. To improve the machine efficiency even further, every aspect of machine losses has to be analyzed. Additional losses are often given as a certain percentage without providing any detailed information about the actual calculation process; meanwhile, there are many design-dependent losses that have an effect on the total amount of additional losses and that have to be taken into consideration. Additional losses are most often eddy current losses in different parts of the machine. These losses are usually difficult to calculate in the design process. In this doctoral thesis, some additional losses are identified and modeled. Further, suggestions on how to minimize the losses are given. Iron losses can differ significantly between the measured no-load values and the loss values under load. In addition, with embedded magnet rotors, the quadrature-axis armature reaction adds losses to the stator iron by manipulating the harmonic content of the flux. It was, therefore, re-evaluated that in salient pole machines, to minimize the losses and the loss difference between the no-load and load operation, the flux density has to be kept below 1.5 T in the stator yoke, which is the traditional guideline for machine designers. Eddy current losses may occur in the end-winding area and in the support structure of the machine, that is, in the finger plate and the clamping ring. With construction steel, these losses account for 0.08% of the input power of the machine. These losses can be reduced almost to zero by using nonmagnetic stainless steel. In addition, the machine housing may be subjected to eddy current losses if the flux density exceeds 1.5 T in the stator yoke. Winding losses can rise rapidly when high frequencies and 10–15 mm high conductors are used. In general, minimizing the winding losses is simple. For example, it can be done by dividing the conductor into transposed subconductors. However, this comes with the expense of an increase in the DC resistance. In the doctoral thesis, a new method is presented to minimize the winding losses by applying a litz wire with noninsulated strands. The construction is the same as in a normal litz wire but the insulation between the subconductors has been left out. The idea is that the connection is kept weak to prevent harmful eddy currents from flowing. Moreover, the analytical solution for calculating the AC resistance factor of the litz-wire is supplemented by including an end-winding resistance in the analytical solution. A simple measurement device is developed to measure the AC resistance in the windings. In the case of a litz-wire with originally noninsulated strands, vacuum pressure impregnation (VPI) is used to insulate the subconductors. In one of the two cases studied, the VPI affected the AC resistance factor, but in the other case, it did not have any effect. However, more research is needed to determine the effect of the VPI on litz-wire with noninsulated strands. An empirical model is developed to calculate the AC resistance factor of a single-layer formwound winding. The model includes the end-winding length and the number of strands and turns. The end winding includes the circulating current (eddy currents that are traveling through the whole winding between parallel strands) and the main current. The end-winding length also affects the total AC resistance factor.
Resumo:
In this thesis, the contact resistance of graphene devices was investigated because high contact resistance is detrimental to the performance of graphene field-effect transistors (GFET). Method for increasing so-called edge-contact area was applied in device fabrication process, as few nanometers thick Ni layer was used as a catalytic etchant during the annealing process. Finally, Ni was also used as a metal for contact. GFETs were fabricated using electron beam lithography using graphene fabricated by chemical vapor deposition (CVD). Critical part of the fabrication process was to preserve the high quality of the graphene channel while etching the graphene at contact areas with Ni during the annealing. This was achieved by optimizing the combination of temperature and gas flows. The structural properties of graphene were studied using scanning electron microscopy, scanning confocal μ-Raman spectroscopy and optical microscopy. Evaluation of electric transport properties including contact resistance was carried out by transmission line method and four-probe method. The lowest contact resistance found was about at 350 Ωμm. In addition, different methods to transfer CVD graphene synthesized on copper were studied. Typical method using PMMA as a supporting layer leaves some residues after its removal, thus effecting on the performance of a graphene devices. In a metal assisted transfer method, metal is used as an interfacial layer between PMMA and graphene. This allows more effective removal of PMMA. However, Raman spectra of graphene transferred by metal assisted method showed somewhat lower quality than the PMMA assisted method
Resumo:
Nine isolates of Bipolaris sorokiniana were inoculated on three cultivars of wheat plants (susceptible, moderately resistant, resistant). Eight days after the inoculation, the isolates were recovered (27 isolates) and the following isozymatic patterns were analyzed: esterase, alkaline phosphatase, acid phosphatase, malate dehydrogenase, and superoxide dismutase. The esterase system was the most polymorphic, and the isolates recovered from the susceptible cultivar showed the highest variability. This is evidence that this cultivar exerts low selection pressure on the pathogen
Resumo:
Innate and acquired resistance to rabies infection was investigated in mice genetically selected for high (H) or low (L) antibody responsiveness from selections I, III and IV and in mice selected for maximal (AIRmax) or minimal (AIRmin) acute inflammatory reaction. These mouse lines were infected intramuscularly with different virus dilutions and the LD50 was determined. The HIII and HIV mouse lines were more susceptible than the LIII and LIV lines and the HI line showed a discrete but higher resistance than the LI line. Analysis of the interline (H x L) F1 hybrids from selections III and IV indicated different dominance effects on the "resistant" and" susceptible" phenotypes when the route of vaccination was changed. No differences were observed between the AIRmax and AIRmin mice, suggesting that inflammation plays a minor role in the resistance to rabies virus. The comparison of LD50 in mice vaccinated by distinct routes showed that the highest interline difference occurred after intramuscular vaccination (250-fold between H and L and 800-fold between F1 and L). These results indicate that different mechanisms may participate in acquired antirabies resistance
Resumo:
The role of different cytokines in the peripheral blood mononuclear cell (PBMC) proliferative response and in in vitro granuloma formation was evaluated in a cross-sectional study with patients with the different clinical forms and phases of Schistosoma mansoni infection, as well as a group of individuals "naturally" resistant to infection named normal endemic (NE). The blockage of IL-4 and IL-5 using anti-IL-4 and anti-IL-5 antibodies significantly reduced the PBMC proliferative response to soluble egg (SEA) and adult worm (SWAP) antigens in acute (ACT), chronic intestinal (INT) and hepatosplenic (HS) patients. Similar results were obtained in the in vitro granuloma formation. Blockage of IL-10 had no significant effect on either assay using PBMC from ACT or HS. In contrast, the addition of anti-IL-10 antibodies to PBMC cultures from INT patients significantly increased the proliferative response to SEA and SWAP as well as the in vitro granuloma formation. Interestingly, association of anti-IL-4 and anti-IL-10 antibodies did not increase the PBMC proliferative response of these patients, suggesting that IL-10 may act by modulating IL-4 and IL-5 secretion. Addition of recombinant IL-10 decreased the proliferative response to undetectable levels when PBMC from patients with the different clinical forms were used. Analysis of IFN-g in the supernatants showed that PBMC from INT patients secreted low levels of IFN-g upon antigenic stimulation. In contrast, PBMC from NE secreted high levels of IFN-g. These data suggest that IL-10 is an important cytokine in regulating the immune response and possibly controlling morbidity in human schistosomiasis mansoni, and that the production of IFN-g may be associated with resistance to infection.
Resumo:
Low levels of sex hormone-binding globulin (SHBG) are considered to be an indirect index of hyperinsulinemia, predicting the later onset of diabetes mellitus type 2. In the insulin resistance state and in the presence of an increased pancreatic ß-cell demand (e.g. obesity) both absolute and relative increases in proinsulin secretion occur. In the present study we investigated the correlation between SHBG and pancreatic ß-cell secretion in men with different body compositions. Eighteen young men (30.0 ± 2.4 years) with normal glucose tolerance and body mass indexes (BMI) ranging from 22.6 to 43.2 kg/m2 were submitted to an oral glucose tolerance test (75 g) and baseline and 120-min blood samples were used to determine insulin, proinsulin and C-peptide by specific immunoassays. Baseline SHBG values were significantly correlated with baseline insulin (r = -0.58, P<0.05), proinsulin (r = -0.47, P<0.05), C-peptide (r = -0.55, P<0.05) and also with proinsulin at 120 min after glucose load (r = -0.58, P<0.05). Stepwise regression analysis revealed that proinsulin values at 120 min were the strongest predictor of SHBG (r = -0.58, P<0.05). When subjects were divided into obese (BMI >28 kg/m2, N = 8) and nonobese (BMI £25 kg/m2, N = 10) groups, significantly lower levels of SHBG were found in the obese subjects. The obese group had significantly higher baseline proinsulin, C-peptide and 120-min proinsulin and insulin levels. For the first time using a specific assay for insulin determination, a strong inverse correlation between insulinemia and SHBG levels was confirmed. The finding of a strong negative correlation between SHBG levels and pancreatic ß-cell secretion, mainly for the 120-min post-glucose load proinsulin levels, reinforces the concept that low SHBG levels are a suitable marker of increased pancreatic ß-cell demand.
Resumo:
Apoptotic protease activating factor 1 (APAF-1) has a critical role in the regulation of apoptosis. In the present study, the mRNA expression analysis of different APAF-1 transcripts (APAF-1S, APAF-1LC, APAF-1LN, and APAF-1XL) was analyzed in bone marrow samples from 37 patients with acute myeloid leukemia (newly diagnosed, with no previous treatment). APAF-1XL and APAF-1LN transcripts (with and without an extra WD-40 repeat region, respectively) were detected in all samples, although the major form expressed was APAF-1XL in 65% of the samples (group 1), while 35% of the samples expressed primarily APAF-1LN (group 2). Only 46% of the patients presented complete remission in response to remission induction therapy (represented by less than 5% marrow blasts and hematological recovery), all but 2 cases being from group 1, 21.6% did not attain complete remission (only 1 case from group 1), and 32.4% of the patients died early. Lower expression of APAF-1XL (APAF-1XL/APAF-1LN ratio <1.2) was associated with a poor response to therapy (P = 0.0005, Fisher exact test). Both groups showed similar characteristics regarding white blood cell counts, cytogenetic data or presence of gene rearrangements associated with good prognosis as AML1-ETO, CBFB-MYH11 and PML/RARA. Since it has been shown that only the isoforms with the extra WD-40 repeat region activate procaspase-9, we suggest that low procaspase-9 activation may also be involved in the deregulation of apoptosis and chemotherapy resistance in acute myeloid leukemia.
Resumo:
Exercise is a low-cost intervention that promotes health and contributes to the maintenance of the quality of life. The present study was designed to investigate the influence of different resistance exercise protocols on the nociceptive threshold of rats. Female Wistar rats were used to perform exercises in a weight-lifting exercise model. The following groups were examined (N = 6 per group): untrained rats (control group); an acute protocol group consisting of rats submitted to 15 sets of 15 repetitions of resistance exercise (acute group); rats exercised with 3 sets of 10 repetitions, three times per week for 12 weeks (trained group), and a group consisting of trained rats that were further submitted to the acute protocol (trained-acute group). The nociceptive threshold was measured by the paw-withdrawal test, in which the withdrawal threshold (escape reaction) was measured by an apparatus applying force to the plantar surface of the animal paw. The opioid antagonist naloxone (2 mg/kg) was administered subcutaneously 10 min before the exercise protocols. The trained group demonstrated antinociception only up to day 45 of the 12-week training period. A significant increase (37%, P < 0.05) in the nociceptive threshold was produced immediately after exercise, decreasing to 15% after 15 min, when the acute exercise protocol was used. Naloxone reversed this effect. These data show that the acute resistance exercise protocol was effective in producing antinociception for 15 min. This antinociceptive effect is mediated by the activation of opioid receptors.
Resumo:
The emergence of ganciclovir (GCV) resistance during the treatment of human cytomegalovirus (HCMV) infection is a serious clinical challenge, and is associated with high morbidity and mortality. In this case report, we describe the emergence of two consecutive mutations (A594V and L595W) related to GCV resistance in a patient with HCMV retinitis and long-term HIV progression after approximately 240 days of GCV use. Following the diagnosis of retinitis, the introduction of GCV did not result in viral load reduction. The detected mutations appeared late in the treatment, and we propose that other factors (high initial HCMV load, previous GCV exposure, low CD4+ cell count), in addition to the presence of resistance mutations, may have contributed to the treatment failure of HCMV infection in this patient.
Resumo:
This research is a qualitative study of cultural reproduction and resistance from students' perspectives. Thirteen teenagers (eight in attendance in regular high schools and five drop-outs) were recruited to take part and were involved to varying degrees through interviews, journal writing, and group interactive sessions. A purposive sampling design was used initially to recruit individuals known to the researcher through contacts in an alternate education setting. Other participants were recruited throughout the research phase. The theoretical aspects are premised on the work of Paul Willis, Michel Foucault, and Pierre Bourdieu. The reflexive praxeology of Bourdieu reflects the position taken as one way of understanding how students construct and respond to the situations of cultural dominance they experience in schools. The same reflexivity is offered for suggestions as to how teachers can respond to their own position in the education system.
Resumo:
Many position stands and review papers have refuted the myths associated with resistance training (RT) in children and adolescents. With proper training methods, RT for children and adolescents can be relatively safe and improve overall health. The objective of this position paper and review is to highlight research and provide recommendations in aspects of RT that have not been extensively reported in the pediatric literature. In addition to the well-documented increases in muscular strength and endurance, RT has been used to improve function in pediatric patients with cystic fibrosis, cerebral palsy and burn victims. Increases in children’s muscular strength have been attributed primarily to neurological adaptations due to the disproportionately higher increase in muscle strength than in muscle size. Although most studies using anthropometric measures have not shown significant muscle hypertrophy in children, more sensitive measures such as magnetic resonance imaging and ultrasound have suggested hypertrophy may occur. There is no minimum age for RT for children. However the training and instruction must be appropriate for children and adolescents involving a proper warm-up, cool-down and an appropriate choice of exercises. It is recommended that low-to-moderate intensity resistance should be utilized 2-3 times per week on non-consecutive days, with 1-2 sets initially, progressing to 4 sets of 8-15 repetitions for 8-12 exercises. These exercises can include more advanced movements such as Olympic style lifting, plyometrics and balance training, which can enhance strength, power, co-ordination and balance. However specific guidelines for these more advanced techniques need to be established for youth. In conclusion, a RT program that is within a child’s or adolescent’s capacity, involves gradual progression under qualified instruction and supervision with appropriately sized equipment can involve more advanced or intense RT exercises which can lead to functional (i.e. muscular strength, endurance, power, balance and co-ordination) and health benefits.
Resumo:
E. coli avec potentiel zoonotique pourrait éclore dans les réservoirs porcins et avicoles. Cette étude consiste à examiner la présence de souches E. coli porteuses de gènes virulents associés aux STEC (E. coli producteurs de Shiga-toxines), EPEC (E. coli entéropathogène), et ExPEC (E. coli pathogène extra-intestinal) chez les porcs et volailles élevés au Vietnam. Des prélèvements d’excréments et de carcasses ont été effectués dans des fermes et abattoirs porcins et avicoles sélectionnés où les animaux ont été suivis de l’élevage à l’abattage. Un total de 13,1% des souches, toutes sources confondues, ont été catégorisées comme potentiellement contaminées par ExPEC, possédant un ou plusieurs gènes de virulence iucD, tsh, papC et cnf. Peu d’isolats d’autres pathotypes ont été observés. Tous les gènes de virulence ExPEC, à l’exception de cnf, ont été identifiés plus fréquemment dans les isolats de fèces et carcasses avicoles que dans les isolats porcins. Même constatation pour le groupe du phylogénétique D. Une multirésistance aux médicaments a été régulièrement observée chez les deux isolats ExPEC. Les isolats de fèces de volailles ont souvent été associés à une résistance à l’acide nalidixique et à la ciprofloxacine (P<0.05), de même qu’au gène blaTEM, alors que les gènes qnr et aac(6’)-Ib ont peu été rencontrés des deux côtés. Cette étude démontre que les isolats ExPEC avicoles sont potentiellement plus pathogèniques que ceux porcins et que les isolats ExPEC de carcasses porcines et avicoles peuvent provenir de leurs excréments par la contamination associée au processus d'abattage. Ainsi, la volaille, particulièrement, serait un facteur de transmission de souches ExPEC zoonotiques.
Resumo:
Zinc salts of ethyl, isopropyl, and butyl xanthates were prepared in the laboratory. The effect of these xanthates in combination with zinc diethyldithiocarbamate (ZDC) on the vulcanization of silica-filled NBR compounds has been studied at different temperatures. The cure times of these compounds were compared with that of NBR compounds containing tetramethylthiuram disulphide/dibenzthiazyl disulphide. The rubber compounds with the xanthates and ZDC were cured at various temperatures from 60 to 150°C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density, elongation at break, compression set, abrasion resistance, flex resistance, heat buildup, etc. were evaluated. The properties showed that zinc salt of xanthate/ZDC combination has a positive synergistic effect on the cure rate and mechanical properties of NBR compounds.