Influência da composição química e da microestrutura na usinabilidade do aço de corte fácil com adição de chumbo (SAE12L14)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização microestrutural e mecânica de aços bifásicos de ultra-alta resistência como médio teor de carbono

Pós-graduação em Engenharia Mecânica - FEG

The economics of climate change in Latin America and the Caribbean: Paradoxes and challenges of sustainable development

The robust growth of Latin American and Caribbean economies in recent years has led to an improvement in economic and social conditions in the region. It has also had collateral negative effects, however, such as more air pollution in urban areas and a serious deterioration of various natural assets, including non-renewable resources, water resources and forests. There are economies and societies within the region that are highly vulnerable to all sorts of adverse impacts of climate change, and whose production structures and consumption patterns still tend to leave a large carbon footprint. This situation has reached the point of undermining the foundations of the region’s economic buoyancy. Latin America and the Caribbean therefore needs to make the transition in the years to come towards a sustainable form of development that will preserve its economic, social and natural assets for future generations and leave them with a legacy of a more equal, more socially inclusive, low-carbon form of economic growth. Viewed from this standpoint, the climate change challenge is also a sustainable development challenge, and if it is to be addressed successfully, a global consensus that recognizes the asymmetries and paradoxes of the problem will have to be reached..

The employment situation in Latin America and the Caribbean: Recovery of employment: towards a sustainable model

The adverse effects on Latin America and the Caribbean of the global economic and financial crisis, the worst since the 1930s, have been considerably less than was once feared. Although a run of growth was cut short in 2009 and regional output shrank by 1.9%, the impact of the crisis was limited by the application of countercyclical fiscal and monetary policies by many of the region’s governments. The recovery in the economies, particularly in South America, has gone hand-in-hand with the rapid resurgence of the emerging economies of Asia, with all the favourable consequences this has had for global trade. A similar pattern may be observed regarding the impact of the crisis on labour markets in Latin America and the Caribbean. Although millions of people lost their jobs or had to trade down to lower-quality work, levels of employment (including formal employment) fell by less than originally foreseen. At the same time, real wages rose slightly in a context of falling inflation. The labour market thus stabilized domestic demand, and this contributed to the recovery that began in many countries in late 2009. Improved international trade and financing conditions, and the pick-up in domestic demand driven by macroeconomic policies, have led different commentators to estimate growth in the region’s economy at some 6% in 2010. As detailed in the first part of this edition of the Bulletin, the upturn has been manifested at the regional level by the creation of formal employment, a rise in the employment rate, a decline in joblessness and a moderate increase in real wages. Specifically, it is estimatedthat the regional unemployment rate will have dropped by 0.6 percentage points, from 8.1% in 2009 to 7.5% in 2010. The performance of different countries and subregions has been very uneven, however. On the one hand, there is Brazil, where high economic growth has been accompanied by vigorous creation of formal jobs and the unemployment rate has dropped to levels not seen in a long time. Other countries in South America have benefited from strong demand for natural resources from the Asian countries. Combined with higher domestic demand, this has raised their economic growth rates and had a positive impact on employment indicators. On the other hand, the recovery is still very weak in certain countries and subregions, particularly in the Caribbean, with employment indicators continuing to worsen.Thus, the recovery in the region’s economy in 2010 may be characterized as dynamic but uneven. Growth estimates for 2011 are less favourable. The risks associated with the imbalances in the world economy and the withdrawal of countercyclical fiscal packages are likely to cause the region to grow more slowly in 2011. Accordingly, a small further reduction of between 0.2 and 0.4 percentage points in the unemployment rate is projected for 2011. However, these indicators of recovery do not guarantee growth with decent work in the long term. To bolster the improvement in labour market indicators and generate more productive employment and decent work, the region’s countries need to strengthen their macroeconomic policies, improve regional and global policy coordination, identify and remove bottlenecks in the labour market itself and enhance instruments designed to promote greater equality. Like the rest of the world, the Latin American and Caribbean region is also confronted with the challenge of transforming the way it produces so that its economies can develop along tracks that are sustainable in the long term. Climate change and the consequent challenge of developing and strengthening low-carbon production and consumption patterns will also affect the way people work. A great challenge ahead is to create green jobs that combine decent work with environmentally sustainable production patterns. From this perspective, the second part of this Bulletin discusses the green jobs approach, offering some information on the challenges and opportunities involved in moving towards a sustainable economy in the region and presenting a set of options for addressing environmental issues and the repercussions of climate change in the world of work. Although the debate about the green jobs concept is fairly new in the region, examples already exist and a number of countries have moved ahead with the application of policies and programmes in this area. Costa Rica has formulated a National Climate Change Strategy, for example, whose foremost achievements include professional training in natural-resource management. In Brazil, fuel production from biomass has increased and social housing with solar panelling is being built. A number of other countries in the region are making progress in areas such as ecotourism, sustainable agriculture and infrastructure for climate change adaptation, and in formalizing the work of people who recycle household waste. The shift towards a more environmentally sustainable economy may cause jobs to be destroyed in some economic sectors and created in others. The working world will inevitably undergo major changes. If the issue is approached by way of social dialogue and appropriate public policies, there is a chance to use this shift to create more decent jobs, thereby contributing to growth in the economy, the construction of higher levels of equality and protection for the environment.

Network for Cooperation in Integrated Water Resource Management for Sustainable Development in Latin America and the Caribbean No. 42

Editorial remarks.-- Open discussion: Conceptual change in regulation in a model of public service provision ; Policies and institutional frameworks for drinking water supply and sanitation ; Strategies for low-carbon development in megacities in Latin America ; Adapting to climate change in water management in the irrigation sector.-- Meetings: Towards a vision on natural resource governance for equality ; Water resources faced with uncertainty and the risk of climate change ; Regulation challenges in the water sector.-- News of the Network: Lessons to be drawn from the interprovincial Colorado River flow distribution agreement ; Rural drinking water programme in Chile ; Ecuador’s Act on Water Resources and Water Use and Exploitation.-- Internet and WWW News

Caracterização mecânica e microestrutural de um aço de baixo carbono

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização microestrutural e de propriedades mecânicas de soldas do aço ASTM A 131 pelos processos FCAW convencional e com adição de arame frio

O trabalho aqui representado retrata de modo comparativo as características mecânicas e microestruturais de metais de solda empregando duas técnicas de soldagem uma já disseminada, FCAW (Soldagem a Arco Voltaico com Arame Tubular) e a outra é inovadora, FCAW-AF (Soldagem a Arco Voltaico com Arame Tubular com Adição de um Arame Frio não energizado) em três níveis de velocidades 6, 8 e 10 m/min. Sendo que este processo variou os diâmetros dos arames frio adicionados, entre 0.8 e 1.0 mm. O metal de base utilizado foi o aço naval ASTM 131 grau A (baixo carbono) em geometria de chapas de 150 mm x 300 mm x 9,5 mm, aplicadas em chanfro em V (Bisel de 22,5º) com ângulo somado de 45º, com leve abertura de raiz de 2,4 mm. A solda usada foi do tipo topo com a aplicação de dois passes, um passe de raiz e o passe de acabamento (ou enchimento). A fim averiguar as condições desses cordões de solda foram realizados 05 tipos de ensaios destrutivos, são eles: dobramento transversal de face, tração, tenacidade ao impacto (tipo Charpy com entalhe em V), microdureza e o ensaio metalográficos. Além das análises não destrutivas como o ensaio visual e o líquido penetrante. De maneira geral, os resultados para o processo FCAW-AF, mostraram-se compatíveis, em relação ao processo FCAW convencional, porém alguns resultados apresentaram valores de propriedades mecânicas menores. Este fato pode, muito provavelmente ter ocorrido pela presença de descontinuidade na junta pelo FCAW-AF. Quanto às caracterizações microestruturais, os resultados da junta FCAW-AF foram semelhantes os da FCAW convencional para todos os níveis estudados.

Second Phase Precipitation in Ultrafine-grained Ferrite Steel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Application of acoustoelasticity to measure the stress generated by milling in ASTM A36 steel plates

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação de cavacos de titânio para produção de revestimentos resistentes ao desgaste

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de tratamentos térmicos visando ganhos magnéticos em aços com ultra baixa concentração de carbono

The relationship between the microstructure and the magnetic properties of soft magnetic materials, have been studied by different researchers who seek to employ electrical systems, increasing their life span and reduce their energy consumption. Following this same line the Brazilian Synchrotron Light Laboratory developed a new synchrotron light source, the Sirius, where magnetic materials with high magnetic permeability values are being studied for use in accelerator dipoles. The low carbon steel is a ferromagnetic material that has a great relationship between cost and magnetic permeability. Aiming to raise the values of permeability of the material, heat treatments were done and evaluated the magnetic properties, microstructure and mechanical properties to correlate them. It was noted that the thermal annealing were the most effective, and the annealing performed with a small time threshold, which only phenomenon observed was the primary recrystallisation, was the most elevated values of magnetic permeability of the material, due to the average grain size ideal achieved. The heat treatments do not guide the magnetic domains of the material and not influence the mechanical properties of the material due to lack of carbon in the microstructure. The annealing treatments were shown to be an alternative to raising the values of the magnetic permeability of the material and facilitate the implementation of ultra low carbon steel in the dipoles of Sirius

Análise de ciclo avançado com seqüestro de carbono

The energy is considered one of the most important elements in the human´s life providing the survival as well as the well being. Nowadays, the technologies destined to generate power burn fossil fuels which pour gases (carbon dioxide among them) that contribute to the global warming phenomenon. Several research groups and universities have been studying different methods for generating power with low carbon dioxide emissions, including the possibility of burning zero-carbon fuels. In this text, it has been put attention to the Advanced Zero Emission Power Plants (AZEP) which separate the CO2 (from the gases involved in the power generation), compress it, dehydrate it and store it in appropriate reservoirs. The goal of this study was to find a possible solution to produce CO from CO2, activated by solar energy; the reaction between CO and steam generates a syngas comprised of H2 and CO2, which can be separated by chemical and/or physical processes. The text also contains a study concerning the compressed air energy storage power plant (CAES) and come up with its modification to C[CO2]ES. This power plant stores CO2 directing it to a reverse combustion process to produce CO which is headed to a syngas reactor to produce CO2 and H2. Hydrogen is separated and carried to the thermal cycle to generate power with low carbon emissions

Implementação de um tuboexpansor na refinaria do Planalto Paulista – REPLAN com objetivo do aproveitamento da energia contida nos gases residuais do FCC – Fluid Catalytic Cracking na geração de energia elétrica

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Alterações microestruturais decorrentes dos sucessivos reparos de solda TIG aplicados ao longo da vida útil de uma estrutura aeronáutica crítica à segurança de vôo

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Desenvolvimento de aplicativo de análise técnica e econômica para adaptação de uma roda d’água acionada por cima para geração de energia elétrica no meio rural

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading