Electronic Construction Collaboration System—Phase II, SPR RB02-008, 2010

During the first year of research, work was completed to identify Iowa DOT needs for web-based project management system (WPMS) and evaluate how commercially available solutions could meet these needs. Researchers also worked to pilot test custom developed WPMS solutions on Iowa DOT bridge projects. At the end of the first year of research, a Request for Proposals (RFP) was developed and issued by the Iowa DOT for the selection of a commercial WPMS to pilot test on multiple bridge projects. During the second year of research, the responses to the RFP issued during the first year of research were evaluated and a solution was selected. The selected solution, Attolist, was customized, tested, and implemented during the fall of 2009. Beginning in the winter of 2010, the solution was implemented on Iowa DOT projects. Researchers worked to assist in the training, implementation, and performance evaluation of the solution. Work will continue beyond the second year of research to implement Attolist on an additional pilot project. During this time, work will be completed to evaluate the impact of WPMS on Iowa DOT bridge projects.

Design Methodology for Corrugated Metal Pipe Tiedowns, HR-362, Phase II, 1995

This investigation is the final phase of a three part study whose overall objectives were to determine if a restraining force is required to prevent inlet uplift failures in corrugated metal pipe (CMP) installations, and to develop a procedure for calculating the required force when restraint is required. In the initial phase of the study (HR-306), the extent of the uplift problem in Iowa was determined and the forces acting on a CMP were quantified. In the second phase of the study (HR- 332), laboratory and field tests were conducted. Laboratory tests measured the longitudinal stiffness ofCMP and a full scale field test on a 3.05 m (10 ft) diameter CMP with 0.612 m (2 ft) of cover determined the soil-structure interaction in response to uplift forces. Reported herein are the tasks that were completed in the final phase of the study. In this phase, a buried 2.44 m (8 ft) CMP was tested with and without end-restraint and with various configurations of soil at the inlet end of the pipe. A total of four different soil configurations were tested; in all tests the soil cover was constant at 0.61 m (2 ft). Data from these tests were used to verify the finite element analysis model (FEA) that was developed in this phase of the research. Both experiments and analyses indicate that the primary soil contribution to uplift resistance occurs in the foreslope and that depth of soil cover does not affect the required tiedown force. Using the FEA, design charts were developed with which engineers can determine for a given situation if restraint force is required to prevent an uplift failure. If an engineer determines restraint is needed, the design charts provide the magnitude of the required force. The design charts are applicable to six gages of CMP for four flow conditions and two types of soil.

Glibenclamide enhances neurogenesis and improves long-term functional recovery after transient focal cerebral ischemia

Glibenclamide is neuroprotective against cerebral ischemia in rats. We studied whether glibenclamide enhances long-term brain repair and improves behavioral recovery after stroke. Adult male Wistar rats were subjected to transient middle cerebral artery occlusion (MCAO) for 90 minutes. A low dose of glibenclamide (total 0.6mg) was administered intravenously 6, 12, and 24 hours after reperfusion. We assessed behavioral outcome during a 30-day follow-up and animals were perfused for histological evaluation. In vitro specific binding of glibenclamide to microglia increased after pro-inflammatory stimuli. In vivo glibenclamide was associated with increased migration of doublecortin-positive cells in the striatum toward the ischemic lesion 72 hours after MCAO, and reactive microglia expressed sulfonylurea receptor 1 (SUR1) and Kir6.2 in the medial striatum. One month after MCAO, glibenclamide was also associated with increased number of NeuN-positive and 5-bromo-2-deoxyuridine-positive neurons in the cortex and hippocampus, and enhanced angiogenesis in the hippocampus. Consequently, glibenclamide-treated MCAO rats showed improved performance in the limb-placing test on postoperative days 22 to 29, and in the cylinder and water-maze test on postoperative day 29. Therefore, acute blockade of SUR1 by glibenclamide enhanced long-term brain repair in MCAO rats, which was associated with improved behavioral outcome.

A Monte Carlo approach to the inverse problem of diffuse pollution risk in agricultural catchments

The hydrological and biogeochemical processes that operate in catchments influence the ecological quality of freshwater systems through delivery of fine sediment, nutrients and organic matter. Most models that seek to characterise the delivery of diffuse pollutants from land to water are reductionist. The multitude of processes that are parameterised in such models to ensure generic applicability make them complex and difficult to test on available data. Here, we outline an alternative - data-driven - inverse approach. We apply SCIMAP, a parsimonious risk based model that has an explicit treatment of hydrological connectivity. we take a Bayesian approach to the inverse problem of determining the risk that must be assigned to different land uses in a catchment in order to explain the spatial patterns of measured in-stream nutrient concentrations. We apply the model to identify the key sources of nitrogen (N) and phosphorus (P) diffuse pollution risk in eleven UK catchments covering a range of landscapes. The model results show that: 1) some land use generates a consistently high or low risk of diffuse nutrient pollution; but 2) the risks associated with different land uses vary both between catchments and between nutrients; and 3) that the dominant sources of P and N risk in the catchment are often a function of the spatial configuration of land uses. Taken on a case-by-case basis, this type of inverse approach may be used to help prioritise the focus of interventions to reduce diffuse pollution risk for freshwater ecosystems. (C) 2012 Elsevier B.V. All rights reserved.

Relaciones entre conocimiento del catalán y del castellano y el rendimiento matemático. Un estudio empírico

Este trabajo se desarrolla en el contexto sociocultural y lingüístico de la provincia de Lleida. En él se analiza la relación entre el dominio de las dos lenguas en contacto (catalán y castellano) con el rendimiento en matemáticas. Los resultados revelan que existe una correlación significativa entre el dominio de la lengua vehicular y el rendimiento matemático y, a su vez, que el mayor conocimiento de la lengua vehicular tiene efectos superiores en el rendimiento de los tres tipos de conocimiento que contempla la prueba de matemáticas. Por otra parte, se constata una elevada correlación entre el dominio del castellano y el resultado de la prueba de matemáticas, lo que revela que el conocimiento matemático obtenido a través de una de las lenguas se transfiere a la otra.

Filmipäällystimen nippitapahtuman vaikutus päällystyskoneen ajettavuuteen

Työn tavoitteena oli syventyä filmipäällystimen nippitapahtumaan ja siellä tapahtuviin ilmiöihin. Tämän lisäksi selvitettiin esipäällystysparametrien ja pohjapaperin merkitys filmipäällystimen ajettavuudelle. Erityisesti pyrittiin selvittämään päällystemäärän ja applikointitelojen momenttieron vaikutus ajettavuuteen sekä kiihdytysvaiheessa ilmenevien ajettavuusongelmien syntymekanismit. Työn kokeellinen osa jakaantui kahteen osaan. Ensimmäisessä osassa pyritään löytämään lisäymmärrystä nippitapahtuman ilmiöille joita sitten hyödynnetään toisen osan koeajoissa. Staattisilla kuormituskokeilla tutkittiin telapinnan kokoonpuristumista ja suurnopeus-kamerakuvauksilla nipin geometriaa päällystyskoneen ajon aikana. Applikointitelojen momenttierokoeajoilla pyrittiin selvittämään paperiradan mahdollista luistoa nipissä. MCA-kosteuspitoisuusanalysaattorilla mitattiin nippitapahtuman muutosten vaikutusta filmipäällystimen paluufilmin ominaisuuksiin. Muuttelemalla päällystemäärää ja – jakaumaa sekä applikointitelojen momenttieroa selvitettiin esipäällystysparametrien vaikutus filmipäällystimen ajettavuuteen. Muokkaamalla pohjapaperin absorptiokykyä sekä pastan vedenpidätyskykyä tutkittiin nestepenetraation vaikutusta ajettavuuteen. Telapinnan kokoonpuristuman havaittiin olevan pieni eikä ajon aikana nipin geometriassa havaittu muutoksia. Paperiradan todettiin luistavan nipissä, mutta luistoilmiö oli huomattavasti pienempi mitä nopeuserolukemista voidaan päätellä. Kiihdytysvaiheessa havaittiin selviä muutoksia paluufilmissä, mutta ajon aikana paluufilmi pysyi lähes vakiona. Päällystemäärän todettiin olevan suurin yksittäinen tekijä filmipäällystimen ajettavuudessa ja siihen tulee kiinnittää erityistä huomiota filmipäällystimen kiihdytysvaiheessa. Aukirullauksen levitystelan vaihdon myötä todettiin pohjapaperiin kohdistuvilla kuormituksilla olevan myös suuri merkitys filmipäällystimen ajettavuudelle.

Softkalanteroinnin optimointi luettelopaperin viimeistelyssä

Työssä tutkittiin softkalanteroinnin vaikutus heat set web offset-luettelopaperin laatu- ja painatusominaisuuksiin. Tavoitteena oli löytää luettelopaperin laatuvaatimukset täyttävä ajotapa softkalanterille. Työn kirjallisessa osassa käsitellään softkalanteroinnin teoriaa, softkalanteroinnin vaikutusta sanomalehti-paperin laatuun sekä soft- ja konekalanteroinnin eroja. Lisäksi käsitellään painatusta; densiteettiä ja sen vaikutusta paperin läpipainatukseen. Työn kokeellisessa osassa tutkittiin softkalanterin lämpötilan ja viivapaineen vaikutus luettelopaperin laatuun. Paras laatu sileyden, kiillon sekä painojäljen kannalta saavutetaan käyttämällä korkeaa kalanterin lämpötilaa ja viivapainetta. Massaseoksessa tulisi olla niin paljon hioketta kuin paperin lujuusominaisuudet sallivat. Hioke antaa paperille tasaisen painojäljen. Täyteainetta tulisi käyttää, koska se nostaa opasiteettia ja pienentää läpipainatusta sekä helpottaa kalanteroitumista. Helpommin kalanteroituva paperi pienentää paperin huokostilavuutta, jolla on edullinen vaikutus paperin läpipainatukseen. Luettelopaperin kalanteroiminen yhdellä nipillä on mahdollista, mutta ei suotavaa. Tällöin paperista tulee toispuoleista karheuden suhteen.

Fat oxidation over a range of exercise intensities: fitness versus fatness.

Maximal fat oxidation (MFO), as well as the exercise intensity at which it occurs (Fatmax), have been reported as lower in sedentary overweight individuals but have not been studied in trained overweight individuals. The aim of this study was to compare Fatmax and MFO in lean and overweight recreationally trained males matched for cardiorespiratory fitness (CRF) and to study the relationships between these variables, anthropometric characteristics, and CRF. Twelve recreationally trained overweight (high fatness (HiFat) group, 30.0% ± 5.3% body fat) and 12 lean males (low fatness (LoFat), 17.2% ± 5.7% body fat) matched for CRF (maximal oxygen consumption (V̇O2max) 39.0 ± 5.5 vs. 41.4 ± 7.6 mL·kg(-1)·min(-1), p = 0.31) and age (p = 0.93) performed a graded exercise test on a cycle ergometer. V̇O2max and fat and carbohydrate oxidation rates were determined using indirect calorimetry; Fatmax and MFO were determined with a mathematical model (SIN); and % body fat was assessed by air displacement plethysmography. MFO (0.38 ± 0.19 vs. 0.42 ± 0.16 g·min(-1), p = 0.58), Fatmax (46.7% ± 8.6% vs. 45.4% ± 7.2% V̇O2max, p = 0.71), and fat oxidation rates over a wide range of exercise intensities were not significantly different (p > 0.05) between HiFat and LoFat groups. In the overall cohort (n = 24), MFO and Fatmax were correlated with V̇O2max (r = 0.46, p = 0.02; r = 0.61, p = 0.002) but not with % body fat or body mass index (p > 0.05). Fat oxidation during exercise was similar in recreationally trained overweight and lean males matched for CRF. Consistently, substrate oxidation rates during exercise were not related to adiposity (% body fat) but were related to CRF. The benefits of high CRF independent of body weight and % body fat should be further highlighted in the management of obesity.

Disseny, layout i planificació d'una empresa de producció d'equips foraborda elèctrics

Aquest projecte es basa en l'aplicació de models de simulació de processos a un exemple d'empresa de producció i la seva adaptació en dimensió i recursos al mercat en un entorn de poca capacitat d'inversió i finançament, de forma que l'entorn de simulació digital aporti valor a la presa de decisions emmarcada en l'estratègia de l'empresa en cada escenari de mercat en que aquesta es trobi. Es realitza el treball sobre el cas d'una empresa, INNOVANAUTIC, dedicada a la innovació, desenvolupament i producció de sistemes de propulsió d'embarcacions. La simulació es una tècnica que permet optimitzar els processos, representant-ne i comprovant el funcionament dels processos, tant entorns físics, de producció com dels serveis associats o subcontractacions de diferents processos i els seus impactes en la disponibilitat de recursos, espais i terminis d'entrega, sense haver de recórrer a procediments de prova i error sobre sistemes reals que impliquen costos a tots nivells en l'empresa. Aquestes metodologies son habitualment emprades en d'altres països o també en el nostre país però en empreses de gran tamany. El present treball, emmarcat dins un entorn socioeconòmic convuls, amb grans limitacions financeres i de recursos per les empreses, demostra com la utilització d'eines de simulació és útil per a PIMES en aquest entorn i permet el dimensionament i la modelització dels processos de forma que es permeti trobar els punts òptims en els que l'empresa ha de donar un pas de creixement en alguns dels paràmetres. La metodologia amb que s'elabora el present treball es la de plantejar una simulació complerta del procés, i definir diversos escenaris de mercat per als productes fabricats, cercant els punt òptims de canvi de dimensió de l'empresa atenent a espai físic, sotscontractació de processos, personal i recursos.

Pientalojen ilmalämpöpumput sähköverkossa

Työssä tutkitaan ilmalämpöpumppujen kokonaisvaltaista vaikutusta sähköverkkoon. Tarkastelu aloitetaan lämpöpumppujen toiminnasta ja rakenteesta, josta jatketaan laitteen käytettävyyteen ja muiden lämmitysmenetelmien vertailuun. Sähköisten ominaisuuksien tarkastelussa pohditaan ilmalämpöpumppujen vaikutusta suomalaiseen sähköverkkoon muun muassa yleissähkötekniikan, taloudellisuuden ja energiatehokkuuden sekä häiriöiden kannalta. Tämä tutkielma rajoittuu pientaloihin, ja niihin asennettuihin ilma-ilmalämpöpumppuihin. Työn loppupäätelmänä on, että ilmalämpöpumppujen käytöstä ei juuri aiheudu vaikutuksia suomalaiseen sähköverkkoon. Suurimmat ilmalämpöpumppujen käytöstä syntyvät seuraukset kohdistuvat sähköverkkoyhtiöihin, joihin ilmalämpöpumput aiheuttavat taloudellisia menetyksiä. Suuret ja tulevaisuudessa kasvavat ilmalämpöpumppumäärät aiheuttavat sähköntuotantoon lisätehontarvetta huippukuorman aikaan. Toisaalta välitehoalueella tehontarve sekä energiankulutus pienenevät. Sähköverkoissa ei ole toistaiseksi havaittu ilmalämpöpumpuista johtuvia häiriöitä.

Kassavirta-analyysi velkarahoittajan näkökulmasta

Tutkielman tavoitteena oli selvittää vuonna 2006 voimaan astuneen osakeyhtiölain, ja sen seurauksena parantuneen velkojainsuojan vaikutus suomessa käytettäviin kassavirtalaskelmiin yritysanalyysissa. Erityisesti tutkittiin maksukykyisyystestin vaikutusta kassavirtalaskelmissa käytettävään maksunsaantijärjestykseen. Aineisto kerättiin haastattelemalla merkittävimpien suomalaisten rahoittajien yritystutkimusten edustajia ja käymällä läpi suomalaista rahoitusalan kirjallisuutta. Tutkielmassa kävi ilmi, että suomen merkittävimpien rahoittajien käyttämissä, tai rahoitusalan kirjallisuudessa esitetyissä kassavirtalaskelmissa, ei ollut otettu huomioon maksukykyisyystestin vaikutusta kassavirta-analyysiin. Tutkielmassa esitetään uudenlainen kassavirtalaskelma, mikä noudattaa mahdollisimman hyvin osakeyhtiön maksunsaantijärjestystä. Uusi kassavirtalaskelma sopii nykyisin Suomessa yleisesti käytössä olevia kassavirtalaskelmia paremmin sekä yrityksen velkakapasiteetin arvioimiseen että osakeyhtiön maksukykyisyystestin tekemiseen osingonjakopäätöksen tueksi. Lisäksi tutkielmassa havainnollistetaan esimerkkilaskelmin kassavirtaanalyysin tekemistä sekä Yritystutkimusneuvottelukunnan suosittamalla kassavirtalaskelmalla että uudenlaisella kassavirtalaskelmalla

Model development for circulating fluidized bed boiler operation

Comprehensive understanding of the heat transfer processes that take place during circulating fluidized bed (CFB) combustion is one of the most important issues in CFB technology development. This leads to possibility of predicting, evaluation and proper design of combustion and heat transfer mechanisms. The aim of this thesis is to develop a model for circulating fluidized bed boiler operation. Empirical correlations are used for determining heat transfer coefficients in each part of the furnace. The proposed model is used both in design and offdesign conditions. During off-design simulations fuel moisture content and boiler load effects on boiler operation have been investigated. In theoretical part of the thesis, fuel properties of most typical classes of biomass are widely reviewed. Various schemes of biomass utilization are presented and, especially, concerning circulating fluidized bed boilers. In addition, possible negative effects of biomass usage in boilers are briefly discussed.

Hipsometric relationship modeling using data sampled in tree scaling and inventory plots

This work evaluated eight hypsometric models to represent tree height-diameter relationship, using data obtained from the scaling of 118 trees and 25 inventory plots. Residue graphic analysis and percent deviation mean criteria, qui-square test precision, residual standard error between real and estimated heights and the graybill f test were adopted. The identity of the hypsometric models was also verified by applying the F(Ho) test on the plot data grouped to the scaling data. It was concluded that better accuracy can be obtained by using the model prodan, with h and d1,3 data measured in 10 trees by plots grouped into these scaling data measurements of even-aged forest stands.

Parameter estimation and use of gamma interferon assay for the diagnosis of bovine tuberculosis in Brazil

This study aimed to evaluate the interference of tuberculin test on the gamma-interferon (INFg) assay, to estimate the sensitivity and specificity of the INFg assay in Brazilian conditions, and to simulate multiple testing using the comparative tuberculin test and the INFg assay. Three hundred-fifty cattle from two TB-free and two TB-infected herds were submitted to the comparative tuberculin test and the INFg assay. The comparative tuberculin test was performed using avian and bovine PPD. The INFg assay was performed by the BovigamTM kit (CSL Veterinary, Australia), according to the manufacturer's specifications. Sensitivity and specificity of the INFg assay were assessed by a Bayesian latent class model. These diagnostic parameters were also estimate for multiple testing. The results of INFg assay on D0 and D3 after the comparative tuberculin test were compared by the McNemar's test and kappa statistics. Results of mean optical density from INFg assay on both days were similar. Sensitivity and specificity of the INFg assay showed results varying (95% confidence intervals) from 72 to 100% and 74 to 100% respectively. Sensitivity of parallel testing was over 97.5%, while specificity of serial testing was over 99.7%. The INFg assay proved to be a very useful diagnostic method.

Morphology and morphometry of feline bone marrow-derived mesenchymal stem cells in culture

Mesenchymal stem cells (MSC) are increasingly being proposed as a therapeutic option for treatment of a variety of different diseases in human and veterinary medicine. Stem cells have been isolated from feline bone marrow, however, very few data exist about the morphology of these cells and no data were found about the morphometry of feline bone marrow-derived MSCs (BM-MSCs). The objectives of this study were the isolation, growth evaluation, differentiation potential and characterization of feline BM-MSCs by their morphological and morphometric characteristics. in vitro differentiation assays were conducted to confirm the multipotency of feline MSC, as assessed by their ability to differentiate into three cell lineages (osteoblasts, chondrocytes, and adipocytes). To evaluate morphological and morphometric characteristics the cells are maintained in culture. Cells were observed with light microscope, with association of dyes, and they were measured at 24, 48, 72 and 120h of culture (P1 and P3). The non-parametric ANOVA test for independent samples was performed and the means were compared by Tukey's test. On average, the number of mononuclear cells obtained was 12.29 (±6.05x10(6)) cells/mL of bone marrow. Morphologically, BM-MSCs were long and fusiforms, and squamous with abundant cytoplasm. In the morphometric study of the cells, it was observed a significant increase in average length of cells during the first passage. The cell lengths were 106.97±38.16µm and 177.91±71.61µm, respectively, at first and third passages (24 h). The cell widths were 30.79±16.75 µm and 40.18±20.46µm, respectively, at first and third passages (24 h).The nucleus length of the feline BM-MSCs at P1 increased from 16.28µm (24h) to 21.29µm (120h). However, at P3, the nucleus length was 26.35µm (24h) and 25.22µm (120h). This information could be important for future application and use of feline BM-MSCs.