Americium nuclear battery for space power applications

The work presents simplified242mAm fueled nuclear battery concept design featuring direct fission products energy conversion and passive heat rejection. The performed calculations of power conversion efficiency under thermal and nuclear design constraints showed that 14 W/kg power density can be achieved, which corresponds to conversion efficiency of about 6%. Total power of the battery scales linearly with its surface area. 144 kW of electric power can be produced by a nuclear battery with an external radius of about 174 cm and total mass of less than 10300 kg. The mass of242m Am fuel for such a system is 3200 gram.

A combined nonfertile and UO2 PWR fuel assembly for actinide waste minimization

A new combined Non Fertile and Uranium (CONFU) fuel assembly is proposed to limit the actinides that need long-term high-level waste storage from the pressurized water reactor (PWR) fuel cycle. In the CONFU assembly concept, ∼20% of the UO2 fuel pins are replaced with fertile free fuel hosting the transuranic elements (TRUs) generated in the previous cycle. This leads to a fuel cycle sustainable with respect to net TRU generation, and the amount and radiotoxicity of the nuclear waste can be significantly reduced in comparison with the conventional once-through UO2 fuel cycle. It is shown that under the constraints of acceptable power peaking limits, the CONFU assembly exhibits negative reactivity feedback coefficients comparable in values to those of the reference UO2 fuel. Feasibility of the PWR core operation and control with complete TRU recycle has been shown based on full-core three-dimensional neutronic simulation. However, gradual buildup of small amounts of Cm and Cf challenges fuel reprocessing and fabrication due to the high spontaneous fission rates of these nuclides and heat generation by some Pu, Am, and Cm isotopes. Feasibility of the processing steps becomes more attainable if the time between discharge and reprocessing is 20 yr or longer.

Ultra-thin 242mAm fuel elements in nuclear reactors

There is a growing interest in using 242mAm as a nuclear fuel. The advantages of 242mAm as a nuclear fuel derive from the fact that 242mAm has the highest thermal fission cross section. The thermal capture cross section is relatively low and the number of neutrons per thermal fission is high. These nuclear properties make it possible to obtain nuclear criticality with ultra-thin fuel elements. The possibility of having ultra-thin fuel elements enables the use of these fission products directly, without the necessity of converting their energy to heat, as is done in conventional reactors. There are three options of using such highly energetic and highly ionized fission products. 1. Using the fission products themselves for ionic propulsion. 2. Using the fission products in an MHD generator, in order to obtain electricity directly. 3. Using the fission products to heat a gas up to a high temperature for propulsion purposes. In this work, we are not dealing with a specific reactor design, but only calculating the minimal fuel elements' thickness and the energy of the fission products emerging from these fuel elements. It was found that it is possible to design a nuclear reactor with a fuel element of less than 1 μm of 242mAm. In such a fuel element, 90% of the fission products' energy can escape.

Microheterogeneous Thoria-Urania Fuels for Pressurized Water Reactors

A thorium-based fuel cycle for light water reactors will reduce the plutonium generation rate and enhance the proliferation resistance of the spent fuel. However, priming the thorium cycle with ²³⁵U is necessary, and the ²³⁵U fraction in the uranium must be limited to below 20% to minimize proliferation concerns. Thus, a once-through thorium-uranium dioxide (ThO2-UO2) fuel cycle of no less than 25% uranium becomes necessary for normal pressurized water reactor (PWR) operating cycle lengths. Spatial separation of the uranium and thorium parts of the fuel can improve the achievable burnup of the thorium-uranium fuel designs through more effective breeding of ²³³U from the ²³²Th. Focus is on microheterogeneous fuel designs for PWRs, where the spatial separation of the uranium and thorium is on the order of a few millimetres to a few centimetres, including duplex pellet, axially microheterogeneous fuel, and a checkerboard of uranium and thorium pins. A special effort was made to understand the underlying reactor physics mechanisms responsible for enhancing the achievable burnup at spatial separation of the two fuels. The neutron spectral shift was identified as the primary reason for the enhancement of burnup capabilities. Mutual resonance shielding of uranium and thorium is also a factor; however, it is small in magnitude. It is shown that the microheterogeneous fuel can achieve higher burnups, by up to 15%, than the reference all-uranium fuel. However, denaturing of the ²³³U in the thorium portion of the fuel with small amounts of uranium significantly impairs this enhancement. The denaturing is also necessary to meet conventional PWR thermal limits by improving the power share of the thorium region at the beginning of fuel irradiation. Meeting thermal-hydraulic design requirements by some of the microheterogeneous fuels while still meeting or exceeding the burnup of the all-uranium case is shown to be potentially feasible. However, the large power imbalance between the uranium and thorium regions creates several design challenges, such as higher fission gas release and cladding temperature gradients. A reduction of plutonium generation by a factor of 3 in comparison with all-uranium PWR fuel using the same initial ²³⁵U content was estimated. In contrast to homogeneously mixed U-Th fuel, microheterogeneous fuel has a potential for economic performance comparable to the all-UO2 fuel provided that the microheterogeneous fuel incremental manufacturing costs are negligibly small.

The closed thorium-transuranic fuel cycle in reduced-moderation PWRs and BWRs

Multiple recycle of long-lived actinides has the potential to greatly reduce the required storage time for spent nuclear fuel or high level nuclear waste. This is generally thought to require fast reactors as most transuranic (TRU) isotopes have low fission probabilities in thermal reactors. Reduced-moderation LWRs are a potential alternative to fast reactors with reduced time to deployment as they are based on commercially mature LWR technology. Thorium (Th) fuel is neutronically advantageous for TRU multiple recycle in LWRs due to a large improvement in the void coefficient. If Th fuel is used in reduced-moderation LWRs, it appears neutronically feasible to achieve full actinide recycle while burning an external supply of TRU, with related potential improvements in waste management and fuel utilization. In this paper, the fuel cycle of TRU-bearing Th fuel is analysed for reduced-moderation PWRs and BWRs (RMPWRs and RBWRs). RMPWRs have the advantage of relatively rapid implementation and intrinsically low conversion ratios, which is desirable to maximize the TRU burning rate. However, it is challenging to simultaneously satisfy operational and fuel cycle constraints. An RBWR may potentially take longer to implement than an RMPWR due to more extensive changes from current BWR technology. However, the harder neutron spectrum can lead to favourable fuel cycle performance. A two-stage TRU burning cycle, where the first stage is Th-Pu MOX in a conventional PWR feeding a second stage continuous burn in RMPWR or RBWR, is technically reasonable, although it is more suitable for the RBWR implementation. In this case, the fuel cycle performance is relatively insensitive to the discharge burn-up of the first stage. © 2013 Elsevier Ltd. All rights reserved.

Thorium energy futures

The potential for thorium as an alternative or supplement to uranium in fission power generation has long been recognised, and several reactors, of various types, have already operated using thorium-based fuels. Accelerator Driven Subcritical (ADS) systems have benefits and drawbacks when compared to conventional critical thorium reactors, for both solid and molten salt fuels. None of the four options - liquid or solid, with or without an accelerator - can yet be rated as better or worse than the other three, given today's knowledge. We outline the research that will be necessary to lead to an informed choice. Copyright © 2012 by IEEE.

Rickettsia-like organism infection in a freshwater cultured fish Ophiocephalus argus C. in China

From 2001 to 2002, a new and emergent infectious disease of Ophiocephalus argus occurred in a fishery in Hubei Province, China, with an incidence of 60% similar to 70% and a mortality as high as 100 %. The diseased fish showed an enlarged abdomen, the millet-like nodules in internal organs, and the swollen kidney which was composed of 5 similar to 10 sarcoma-like bodies in cream or gray-white colour or ulcerated into beandregs-like substance. Light microscopic observation revealed the basophilic or acidphilic inclusions in cytoplasm of the cells and the granulomas, a diffusive chronic inflammation in internal organs. Further analysis under an electron microscope indicated that the intracytoplasmic inclusions were rickettsia-like organisms (RLOs) that are either spherical or coccoid, with variable size, ranging from 0.5 similar to 1.5 mum in diameter, and enclosed within membrane-bound cytoplasmic vacuoles. RLO had a central nucleoid region with some fine filamentous structures and an electron-dense granule. Its cytoplasm contained abundant ribosomal bodies. Occasionally, RLO appeared to be divided by binary fission. RLOs were also observed in the homogenized tissue of infected fish. The results suggested that the death of cultured O. argus was caused by RLO infection.

A SERINE KINASE REGULATES INTRACELLULAR-LOCALIZATION OF SPLICING FACTORS IN THE CELL CYCLE

Small nuclear ribonucleoprotein particles (snRNPs) and non-snRNP splicing factors containing a serine/arginine-rich domain (SR proteins) concentrate in 'speckles' in the nucleus of interphase cells(1). It is believed that nuclear speckles act as storage sites for splicing factors while splicing occurs on nascent transcripts(2). Splicing factors redistribute in response to transcription inhibition(3,4) or viral infection(5), and nuclear speckles break down and reform as cells progress through mitosis(6). We have now identified and cloned a kinase, SRPK1, which is regulated by the cell cycle and is specific for SR proteins; this kinase is related to a Caenorhabditis elegans kinase and to the fission yeast kinase Dsk1 (ref. 7). SRPK1 specifically induces the disassembly of nuclear speckles, and a high level of SRPK1 inhibits splicing in vitro. Our results indicate that SRPK1 mag have a central role in the regulatory network for splicing, controlling the intranuclear distribution of splicing factors in interphase cells, and the reorganization of nuclear speckles during mitosis.

有机质谱裂解规律及智能解析方法研究

本学位论文分为四个部分，第一部分报道了用串联质谱快速分析合成药物中的微量杂质成分以及分析中药材中的化学成分。第二部分报道了通过质谱和串联质谱发现并合成新型的PdPincer 催化剂，同时对其活性进行测试。第三部分为串联质谱自动解析软件的设计及应用。第四部分概述了应用在质谱中的各种碎裂方式。 第一部分首先总结了5-溴粉防己碱及其类似物的裂解规律，并以此为根据推测出2 个微量杂质的结构。随后针对无患子（Sapindus mukurossi Gatren.）中的皂苷成分，由ESI-QTOF 得到各个皂苷成份的高分辨质量数据进而得到其分子式，然后利用ESI-IT 电喷雾串联质谱对无患子总皂苷中各皂苷成分的结构进行进一步的鉴定。进而以同样的方式，先通过ESI-QTOF 得到黄山药（Dioscoreapanthaica）总皂苷中各个组分化合物的分子式，然后对已有的薯蓣皂苷标准品做串联质谱分析，以得到该类化合物的裂解规律并给出解析该类化合物的流程图。在此利用计算化学的方法讨论了离子的丰度与裂解活化能之间的关系。然后应用APCI-MS/MS 方法探讨了四对同分异构体和几个已知的化合物，并最后用液质联用对其进行确认，同时还给出了4 个未知化合物的可能结构。 第二部分报道通过质谱和串联质谱发现并合成新型的PdPincer 催化剂，同时对其活性进行测试。钯催化的交联反应是有机合成中C-C 键形成的最有效的方法，且硫脲是一类对空气和水都稳定的化合物，因此我们设计并合成了一系列的硫脲钯催化剂并得到了很好的催化活性。我们在对其中一类环状双硫脲化合物进行质谱实验的时候，在正离子模式下发现了反常的[M.H]+，通过串联质谱进一步确定了它是一种新型的PdPincer 结构。我们将其合成出来并通过X-ray 衍射实验确定了它的结构。同时测定其催化活性并与未形成pincer 的类似物进行比较发现该类化合物具有较宽的底物适用性。 第三部分为串联质谱自动解析软件的设计及应用。通过前面两部分的启示，独立设计开发了AuMass（1.0）。其算法是：先通过查找特殊的碎片离子，中性丢失或碎片离子质量差来确定某类化合物的骨架结构，然后利用该类化合物的自动解析流程来对其周边取代基进行确认。通过它快速地对白芍中的化学成分进行解析，并对未知的化合物进行了推测。为了增加它的解析能力，我又对其它类型的化合物裂解规律进行总结，并给出了自动解析流程。实践证明该软件具有相当好的应用价值。 第四部分综述了应用在质谱上的各类母离子的碎裂技术。这里包括了碰撞诱导裂解（CID）、光诱导碎裂（LID）、电子捕获裂解/电子转移裂解（ECD/ETD）、红外多光子解离（IRMPD）、黑体辐射解离（BIRD）和PQD 裂解技术。 This dissertation consists of four chapters. The first chapter reports the rapidanalysis of trace impurities from synthetical medicine and analysis of the chemicalconstitutents from Chinese herb medicines. The second chapter elaborates the studieson the discorvery and synthesis of new type of Pd Pincer catalyst by using MS andtandem MS together with the testing of its catalyst activity. The third chapter dwellson the designation and development of automatic tandem mass spectrometry analysissoftware. The last chapter presents a review on the dissociation technique of massspectrometry. The first chapter reports the rapid analysis of trace impurities from synthesismedicine and analysis of the chemical constitutents from Chinese herb medicines. The fission mechanism of 5-bromotetrandrine was obtained by analysis of the dissociationpathways of major product, by using which the possible structure of the two traceimpurties was assumed. There are lots of saponins in Sapindus mukurossi. Except forthe good spumescence and decontamination，it possesses the bioactivity of antigenand antitch. First of all, the high resolution mass information was obtained by ESI-QTOF. Hence the possible molecular formulars were acquired too. Then weconducted the further detection of the structures of its saponins by using ESI-ITtechnology. In the same manner, first the molecular formulars of every constituentfrom Dioscorea panthaica in total saponins were obtained by ESI-QTOF, and thenacquired the fission mechanism of this type of compounds by tandem massexperiment on a series of known and available saponins. In the same time, theanalysis flowchart was concluded. Here the relationship between the ion intensity andthe corresponding dissiociation activation energy was studied by computer chemistry.Then the four pairs of isomers were differentiated by APCI-MS/MS, as well as thecharacterization of known and unknown compounds. The assumption was confirmed by HPLC-MS/MS. Among them the possible structures of four unknown saponinswas presented. The second part was discovery and synthesis of a new type of Pd pincer catalystby MS and tandem MS. The coupling reaction catalyzed by Pd is the most effectivemethod in C-C formation in organic synthesis. Apart from that, thiourea is type ofcompounds that are stable to atmosphere and moisture. Hence we designed a series ofPd thiourea catalysts. Some of them show the excellent catalyst activity. The abnormalparent ion [M.H]+ was founded in positive ESI mode when we conduct some massspectrometry experiments on the bicyclical thiourea Pd complex. The structure wasproposed by mass and tandem mass spectrometry. Because it was a new type of pincer,we want to test its catalyst activity. So the Pd pincer was synthesized and the detailstructure was obtained by x-ray experiment. It shows the more fitness in catalysis ofSuzuki reaction by comparison with the analogue. The third chapter dwells on the design and development of automatic tandemmass spectrometry analysis software. Inspired by the former two chapters, theAuMass (version 1.0) was developed. Its algorithm is: first check the diagnostic ion,diagnostic neutral loss or diagnostic ions mass intervals in database to find out whatthe analyst’s skeleton belongs to, then identify the peripheral functional group by thecorresponding analysis flowchart. The chemical constituents of Paeonia lactiflorawere identified rapidly by using AuMass. To increase the analysis ability, the othertypes of compounds from Chinese herbs was concluded. Actually, the software isproven to have the much valuable application. The last chapter presented the review on the some kinds of fission technique ofmass spectrometry. It involves the collision induced dissociation (CID), laser induceddissociation (LID), electron capture dissociation/electron transfer dissociation(ECD/ETD), infrared multiple photons dissiociation, black body irraditiondissociation and PQD fission technique from Finnigan.

Kinetic energies of C-n(+) (n <= 58) fragment ions produced by nanosecond laser impact on C-60

Laser-induced fragmentation of C-60 has been studied using a time-of-flight mass spectrometric technique. The average kinetic energies of fragment ions C-n(+) (n <= 58) have been extracted from the measured full width at half maximum (FWHM) of ion beam profiles. The primary formation mechanism of small fragment ion C-n(+) (n < 30) is assumed to be a two-step fragmentation process: C60 sequential decay to unstable C-30(+) ion and the binary fission of C-30(+). Considering a second photo absorption process in the later part of laser pulse duration, good agreement is achieved between experiment and theoretical description of photoion formation. (C) 2009 Elsevier B. V. All rights reserved.

Analytic expressions for alpha particle preformation in heavy nuclei

Experimental alpha decay energies and half-lives are investigated systematically to extract alpha particle preformation in heavy nuclei. Formulas for the preformation factors are proposed that can be used to guide microscopic studies on preformation factors and perform accurate calculations of the alpha decay half-lives. There is little evidence for the existence of an island of long stability of superheavy nuclei.

Cluster preformation in heavy nuclei and radioactivity half-lives

Various cluster radioactivities of heavy nuclei have been investigated by using the unified fission model (UFM). The cluster preformation factors have been extracted by employing the UFM connected with the experimental half-lives, and the relationship of preformation probability between the cluster and alpha-particle has been discussed in detail. In addition, the cluster preformation probability has been studied in the framework of statistical physics. Some useful predictions on the cluster emission half-lives are provided for future experiments.

Half-Lives of Superheavy Nuclei in Z=113 Alpha Decay Chain

The generalized liquid drop model (GLDM), including the proximity effects and centrifugal potential, and the cluster model with Cosh potential are used to study the half-lives of some Z=113 isotopes and their alpha-decay products.The experimental half-lives of (284)113, (283)113, (282)113and their alpha-decay products are well reproduced by the two models when zero angular momenta transfer is assumed. For (278)113 and its alpha-decay products, both the GLDM andthe cluster model could provide satisfactory results if we assume the alpha particle carry five units of angular momenta, which indicates that possible non zero angular momenta transfer and need further experimental measurements with high precision. Finally, we show that half-lives of alpha-decay are quite sensitive to the angular momentum transfers, and a formula could be used to describe the correlation between alpha-decay half-life and angular momentum transfer successfully.