971 resultados para LDH-C4
Resumo:
Se realizó un estudio en Instituto de Capacitación e Investigación en Desarrollo Rural Integral (ICIDRI), como parte de una serie de estudios desarrollados por el mismo, que se ubica en el municipio de Masatepe en el departamento de Masaya, tuvo como ob jetivo evaluar carbono almacenado en el componente arbóreo, para lo que se eligieron tres lotes de un sistema de café bajo sombra; El Genízaro (LGR), El Guanacaste (LGT) y El Cinco piso (LCP). Se realizó un censo forestal al 100 % para individuos con diáme tro mayor a 10 cm, encontrándose 24 familias botánicas, 51 especies y 704 individuos; de estos 348 se encontraron LGR, 226 en LCP y 130 en el LGT, las familias sobresalientes fueron las Fabaceaes, Rutaceaes; Sapotaceaes, Anacardiaceaes y Mimosaceae, las es pecies más representativas fueron: Cordia alliodora 19%, Simarouba glauca 17%, Persea americana 13%, y Mangifera indica y Cedrela o dorata con 12% por individual, acumulando el 73% del total. Al realizar un diagnóstico para conocer la calidad de árboles uti lizados como sombra, se definieron 6 categorías llamadas calidad de árboles; individuos sanos (C1), regulares (C2), con podas muy altas (≥50%) (C3), secos y casi secos (C4), con parasitas (C5) y con otro tipo de afectaciones (C6), se encontró que de los tr es lotes evaluados, El Guanacaste, fue el más sano presentando 42% en categoría (C1) y 22% en (C2). El carbono almacenado por lote fue de 108. 0 t C en el LGR, 54.5 t C para el LCP y 26.7 t C para el LGT, esta diferencias en carbono almacenado por lote se debieron a que estos presentan diferencia en área y así mismo en número de individuos y evaluando el carbono registrado por lote se encontró que e stos valores corresponden a 58.4 t C ha. - 1, almacenado en el componente arbór eo del sistema café bajo sombra
Resumo:
284 p. : graf.
Resumo:
11 p.
Resumo:
可控坍塌芯片互连(C4)技术可以实现高速、高密度、小外形的封装,因此日渐得到关注和发展。本文针对发展新一代c4技术所面临的不流动芯下材料的机械性能问题,采用具有不同填充颗粒含量的不流动芯下材料,通过对材料的机械性能的测试和分析以及有限元模拟,初步揭示了不流动芯下材料变形行为的特点,填充颗粒含量对芯下材料机械性能的影响,以及芯下材料机械性能和芯下材料工艺导致的颗粒沉积对封装可靠性的影响。首先在差示扫描量热仪(DSC)、热一力学分析仪(TMA)上对材料的固条件、热膨胀系数、玻璃化转变温度进行了测试,接着又在六轴微型试验机上对材料在不同温度和应变率下的应力一应变行为进行了测试。测试结果表明,所用材料的固化条件和玻璃化转变温度可以满足不流动芯下材料的性能要求,材料的热膨胀系数高于芯下材料理想的热膨胀系数值,材料中填充颗粒含量、温度、应变率等对材料的应力一应变行为有重要的影响。为了解芯下材料中填充颗粒含量对机械性能的影响,对不同颗粒含量材料在各测试温度和应变率下的杨氏模量、屈服强度和流动应力进行了对比和分析。结果表明,在各测试条件下,芯下材料的杨氏模量基本随着颗粒含量的增加而升高;温度较低时,材料的屈服强度随颗粒含量的增加而升高,但是,较高温度时,材料的屈服强度和流动应力随着颗粒含量的增加呈现先升高后降低再升高的变化趋势。为理解芯下材料的屈服强度和流动应力随着颗粒含量非单调变化的行为,采用广义Eshelby等效夹杂法对含颗粒试样在单轴拉伸时试样内的应力分布进行了分析,并用纳米硬度计对材料纳米尺度的性能进行了测量。应力分析的结果表明,不流动芯下材料的SiO2填充颗粒的加入会在基体里引起应力集中,应力集中系数随着颗粒含量的增加先升高后降低,试样内的应力集中有使材料屈服强度降低的趋势。纳米硬度计的测试结果表明,芯~卜材料内形成了性能介于颗粒Z基体之间的界面相,界面相的形成有使芯下材料屈服强度提高的趋势。芯下材料屈服强度随着填充颗粒含量的非单调的变化是应力集中和界面效应藕合作用的结果。温度和应变率是影响芯下材料机械性能的重要因素。为刻画温度和应变率的效应,采用Pe化yna模型描述材料的应力一应变行为。结果表明,Per叮na模型可以拟合材料应变率相关的应力一应变行为,描述不流动芯下材料应力一应变曲线的基本趋势,对材料在测试范围外的行为给出较合理的预测,并且Perzyna模型可以很方便地用于ABAQUS中,这将易于工业应用。最后,采用商用有限元程序AB AQus分析了芯下材料机械性能和芯下材料工艺导致的填充颗粒沉积对C4封装可靠性的影响。结果表明,在芯片/基板的缝隙中填入芯下材料可以显著延长可控坍塌倒装封装焊点的热疲劳寿命,提高封装可靠性,可控坍塌倒装封装焊点的热疲劳寿命随着芯下材料中填充颗粒含量的增加而增长;芯下材料中填充颗粒在C4封装基板侧的沉积将导致封装焊点的热疲劳寿命缩短,而颗粒在芯片侧的沉积则可使焊点的热疲劳寿命稍稍延长。
Resumo:
The pure Coulomb explosions of the methane clusters (CA(4))(n), (light atom A = H or D) have been investigated by a simplified electrostatic model for both a single cluster and an ensemble of clusters with a given cluster size distribution. The dependence of the energy of ions produced from the explosions on cluster size and the charge state of the carbon ions has been analysed. It is found that, unlike the average proton energy which increases with the charge q of the carbon ions, the average deuteron energy tends to saturate as q becomes larger than 4. This implies that when the laser intensity is sufficiently high for the (CD4)(n) to be ionized to a charge state of (C4+D4+)(n), the neutron yield from a table-top laser-driven Coulomb explosion of deuterated methane clusters (CD4)(n) could be increased significantly by increasing the interaction volume rather than by increasing the laser intensity to produce the higher charge state (C6+D4+)(n). The flight-time spectra of the carbon ions and the light ions have also been studied.
Resumo:
Herein are described the total syntheses of all members of the transtaganolide and basiliolide natural product family. Utilitzation of an Ireland–Claisen rearrangement/Diels–Alder cycloaddition cascade (ICR/DA) allowed for rapid assembly of the transtaganolide and basiliolide oxabicyclo[2.2.2]octane core. This methodology is general and was applicable to all members of the natural product family.
A brief introduction outlines all the synthetic progress previously disclosed by Lee, Dudley, and Johansson. This also includes the initial syntheses of transtaganolides C and D, as well as basiliolide B and epi-basiliolide B accomplished by Stoltz in 2011. Lastly, we discuss our racemic synthesis of basililide C and epi-basiliolide C, which utilized an ICR/DA cascade to constuct the oxabicyclo[2.2.2]octane core and formal [5+2] annulation to form the ketene-acetal containing 7-membered C-ring.
Next, we describe a strategy for an asymmetric ICR/DA cascade, by incorporation of a chiral silane directing group. This allowed for enantioselective construction of the C8 all-carbon quaternary center formed in the Ireland–Claisen rearrangement. Furthermore, a single hydride reduction and subsequent translactonization of a C4 methylester bearing oxabicyclo[2.2.2]octane core demonstrated a viable strategy for the desired skeletal rearrangement to obtain pentacyclic transtaganolides A and B. Application of the asymmetric strategy culminated in the total syntheses of (–)-transtaganolide A, (+)-transtaganolide B, (+)-transtaganolide C, and (–)-transtaganolide D. Comparison of the optical rotation data of the synthetically derived transtaganolides to that from the isolated counterparts has overarching biosynthetic implications which are discussed.
Lastly, improvement to the formal [5+2] annulation strategy is described. Negishi cross-coupling of methoxyethynyl zinc chloride using a palladium Xantphos catalyst is optimized for iodo-cyclohexene. Application of this technology to an iodo-pyrone geranyl ester allowed for formation and isolation of the eneyne product. Hydration of the enenye product forms natural metabolite basiliopyrone. Furthermore, the eneyne product can undergo an ICR/DA cascade and form transtaganolides C and D in a single step from an achiral monocyclic precursor.
Resumo:
En los trabajos expuestos en esta memoria de tesis, hemos analizado elefecto que tienen sobre la capacidad de aprendizaje de diferentes algoritmosde clasificación los cambios en la distribución de clases, teniendo encuenta para ello, diferentes métodos de remuestreo de datos.En concreto se ha analizado este efecto en el conocido algoritmo deconstrucción de árboles de clasificación propuesto por Quinlan, el algoritmoC4.5, y en el algoritmo de construcción de árboles consolidados, elalgoritmo CTC, propuesto por el grupo de investigación ALDAPA de laUniversidad del País Vasco que, basado en el mismo C4.5, obtiene un árbol declasificación pero basado en un conjunto de muestras.Así mismo, planteamos cómo encontrar la distribución de clases más adecuadapara un algoritmo de clasificación y método de remuestreo concretos.
Resumo:
Background: FTY720 (fingolimod, Gilenya(TM)), a structural analog of sphingosine-1-phosphate (S1P), is the first oral drug approved for treatment the relapsing-remitting form of multiple sclerosis (MS), and its efficacy has been related to induced lymphopenia and consequent immunosuppression via modulation of S1P(1) receptors (S1P(1)R). However, due to its lipophilic nature, FTY720 crosses the blood brain barrier (BBB) and could act directly on neural cells. In this study, we investigated the effectiveness of FTY720 as a neuroprotective agent using in vitro and in vivo models of excitotoxic neuronal death and examined if FTY720 exerts a direct action on neurons, or/and an indirect modulation of inflammation-mediated neurodegeneration as a possible mechanism of neuroprotection. Methods: Primary neuronal and organotypic cortical cultures were treated with N-methyl-D-aspartic acid (NMDA) to induce excitotoxic cell death (measured by lactate dehydrogenase (LDH) assay or propidium iodide uptake, respectively). The effects of FTY720 treatment (10, 100 and 1,000 nM) on neuronal survival were examined. As an in vivo model of neuronal death and inflammation, we used intracerebroventricular (icv) administration of kainic acid (KA; 0.5 mu g/2 mu l) in Sprague-Dawley rats. FTY720 was applied icv (1 mu g/2 mu l), together with KA, plus intraperitoneally (ip; 1 mg/kg) 24 h before, and daily, until sacrifice 3 days after icv. Rats were evaluated for neurological score, neuronal loss in CA3 hippocampal region and activation of microglia at the lesion site. In addition, we tested FTY720 as a modulator of microglia responses using microglial cell cultures activated with lipopolysaccharide (LPS) and its effects in stress signalling pathways using western blotting for p38 and JNK1/2 mitogen-activated protein kinases (MAPKs). Results: FTY720 was able to reduce excitotoxic neuronal death in vitro. Moreover, in vivo repeated FTY720 administration attenuated KA-induced neurodegeneration and microgliosis at the CA3 lesion site. Furthermore, FTY720 negatively modulates p38 MAPK in LPS-activated microglia, whereas it had no effect on JNK1/2 activation. Conclusions: These data support a role for FTY720 as a neuroprotective agent against excitotoxin-induced neuronal death and as a negative modulator of neuroinflammation by targeting the p38 MAPK stress signalling pathway in microglia.
Resumo:
3rd International Conference on Mathematical Modeling in Physical Sciences (IC-MSQUARE) Madrid, AUG 28-31, 2014 / editado por Vagenas, EC; Vlachos, DS; Bastos, C; Hofer, T; Kominis, Y; Kosmas, O; LeLay, G; DePadova, P; Rode, B; Suraud, E; Varga, K
Resumo:
The fields of organic electronics and spintronics have the potential to revolutionize the electronics industry. Finding the right materials that can retain their electrical and spin properties when combined is a technological and fundamental challenge. We carry out the study of three archetypal organic molecules in intimate contact with the BiAg2 surface alloy. We show that the BiAg2 alloy is an especially suited substrate due to its inertness as support for molecular films, exhibiting an almost complete absence of substrate-molecular interactions. This is inferred from the persistence of a completely unaltered giant spin-orbit split surface state of the BiAg2 substrate, and from the absence of significant metallic screening of charged molecular levels in the organic layer. Spin-orbit split states in BiAg2 turn out to be far more robust to organic overlayers than previously thought.
Resumo:
This document aims to describe an update of the implementation of the J48Consolidated class within WEKA platform. The J48Consolidated class implements the CTC algorithm [2][3] which builds a unique decision tree based on a set of samples. The J48Consolidated class extends WEKA’s J48 class which implements the well-known C4.5 algorithm. This implementation was described in the technical report "J48Consolidated: An implementation of CTC algorithm for WEKA". The main, but not only, change in this update is the integration of the notion of coverage in order to determine the number of samples to be generated to build a consolidated tree. We define coverage as the percentage of examples of the training sample present in –or covered by– the set of generated subsamples. So, depending on the type of samples that we use, we will need more or less samples in order to achieve a specific value of coverage.
Resumo:
The CTC algorithm, Consolidated Tree Construction algorithm, is a machine learning paradigm that was designed to solve a class imbalance problem, a fraud detection problem in the area of car insurance [1] where, besides, an explanation about the classification made was required. The algorithm is based on a decision tree construction algorithm, in this case the well-known C4.5, but it extracts knowledge from data using a set of samples instead of a single one as C4.5 does. In contrast to other methodologies based on several samples to build a classifier, such as bagging, the CTC builds a single tree and as a consequence, it obtains comprehensible classifiers. The main motivation of this implementation is to make public and available an implementation of the CTC algorithm. With this purpose we have implemented the algorithm within the well-known WEKA data mining environment http://www.cs.waikato.ac.nz/ml/weka/). WEKA is an open source project that contains a collection of machine learning algorithms written in Java for data mining tasks. J48 is the implementation of C4.5 algorithm within the WEKA package. We called J48Consolidated to the implementation of CTC algorithm based on the J48 Java class.
Resumo:
An extensive range of conventional, vane-type, passive vortex generators (VGs) are in use for successful applications of flow separation control. In most cases, the VG height is designed with the same thickness as the local boundary layer at the VG position. However, in some applications, these conventional VGs may produce excess residual drag. The so-called low-profile VGs can reduce the parasitic drag associated to this kind of passive control devices. As suggested by many authors, low-profile VGs can provide enough momentum transfer over a region several times their own height for effective flow-separation control with much lower drag. The main objective of this work is to study the variation of the path and the development of the primary vortex generated by a rectangular VG mounted on a flat plate with five different device heights h = delta, h(1) = 0.8 delta, h(2) = 0.6 delta, h(3) = 0.4 delta and h(4) = 0.2 delta, where delta is the local boundary layer thickness. For this purpose, computational simulations have been carried out at Reynolds number Re = 1350 based on the height of the conventional VG h = 0.25m with the angle of attack of the vane to the oncoming flow beta = 18.5 degrees. The results show that the VG scaling significantly affects the vortex trajectory and the peak vorticity generated by the primary vortex.
Resumo:
O aumento da longevidade evidenciou nas mulheres os efeitos deletérios da deficiência ovariana como, a obesidade central e as doenças neurodegenerativas. Os hábitos alimentares modernos favorecem o consumo excessivo de gorduras, que contribuem para efeitos adversos sobre a saúde, incluindo alteração da composição corporal e da função nervosa. Assim, objetivamos estudar como a dieta hiperlipídica (DH), contendo óleo de soja, associada à perda da função gonadal influenciam o comportamento e o desenvolvimento corporal de ratas adultas. Ratas Wistar adultas foram ovariectomizadas (OVX) ou pseudo-operadas (C) e após 7d passaram a receber dieta contendo 4%(normo) ou 19%(hiperlípidica) de óleo de soja: C4 (n=29), OVX4 (n=30), C19 (n=30), OVX19 (n=30). Foram avaliados a massa e o comprimento corporais e a ingestão alimentar, e aspectos comportamentais de ansiedade, através de teste no Labirinto em Cruz Elevado (LCE); de busca pela novidade, por testes no Campo Vazado (CV); e aprendizagem/memória avaliada no labirinto aquático radial de 8 braços (LAROB). Ao final dos testes, os animais foram anestesiados, exsanguinados e o tecido adiposo intra-abdominal foi coletado e pesado. O soro foi utilizado para dosagens de triglicerídeo (TG), VLDL-c, colesterol (COL), HDL-c e estradiol. A ingestão alimentar média e o comprimento corporal não diferiram entre os grupos, mas o grupo OVX19 mostrou ganho significativo (13,6%) de massa corporal mais precocemente que os demais. O mesmo padrão foi observado quanto à massa de tecido adiposo, que foi 86% maior no OVX19. Os TG, VLDL e COL aumentaram cerca de 28% no OVX19, porém sem alteração de HDL-c (33,762,2 mg/dl). A DH e a ovariectomia se mostraram ansiogênicos e quando associados, a DH parece reverter o efeito ansiogênico da castração. Padrão similar de resposta foi observado na resposta ao teste de busca por novidade. No teste de aprendizagem/memória o OVX4 apresentou maior tempo de latência no primeiro dia, e todos responderam de forma semelhante nos demais dias. Conclui-se que a deficiência de estradiol acompanhada da ingestão de dieta hiperlipídica mantém o desempenho cognitivo, o comportamento emocional e a motivação, embora prejudique a adiposidade e o metabolismo lipídico.
Resumo:
该成果收集了近10年来我们对光合作用与环境方面研究的主要文章共57篇,概括为6个方面的内容,其中原始论文52篇,技术方法5篇。主要的新进展与特色为:a)阐 明CAM植物代谢与PEPCK的调节特殊性。鉴别菠萝和芦荟为CAM-PEPCK亚型,PEPCK是其光下C4酸的脱羧酶。首次证明PEPCK受底物和碳代谢中间产物的调控,纯化酶的负效应剂G6P、FBP、PEP及正效应剂Mn2+的作用在于改变酶蛋白的构象。b)首先指出PEPC也是活性氧攻击的靶蛋白,其失活原因在于酶蛋白氧化降解和构象改变。不同光合途径植物对光氧化的敏感性有别。光氧化条件下C3与C4植物产生.O2- 速率、耗散激发能和PSII稳定性有一定差异。脂氧合酶(LOX)抑制光合电子传递的位点在PSII氧化侧和Q和PQ上。c)指出较强的抗氧化能力(清除自由基能力)、抗UV-B能力(积累较多的UV-B吸收物质),提高叶片吸收的光能中非光化学耗散的比例,增高光合电子流向光呼吸、O2和NO2-光还原等电子传递支路的传递速率和比例是森林植物适应于自然光环境的强光的重要保护策略。d)从马尾松年轮的δ13C分析追踪了前80年来亚热带自然林区CO2浓度的上升速率(0.7~2.3μl/L/年)。对森林中不同人类活动干扰地点大气CO2、NOX和SO2浓度的现场检测和主要树种的生理、生化变化研究,证明其与人类干扰活动的形式和强度有关,为全球变化及其后效应提供了有力的证据。通过电脑调控水稻生长大棚的CO2浓度发现不同品种间对高CO2浓度适应性的显著差别,明确了适应性较强的4个品种,并从多种指标证明高CO2浓度对水稻的光氧化损伤具有缓解或防护效应。e)盐藻细胞中甘油和蛋白质受介质盐浓度调控,固定化培养提高甘油分泌量。改进和发展了利用对有机自由基DPPH. 的清除比例与数量来评价植物抗氧化性的简易可行的分光光度法。