Glimepiride as insulin sensitizer: increased liver and muscle responses to insulin

Aim: Glimepiride, a low-potency insulin secretagogue, is as efficient on glycaemic control as other sulphonylureas, suggesting an additional insulin-sensitizer role. The aim of the present study was to confirm the insulin-sensitizer role of glimepiride and to show extra-pancreatic effects of the drug. Methods: Three-month-old monosodium glutamate (MSG)-induced obese insulin-resistant rats were treated (OG) or not treated (O) with glimepiride for 4 weeks and compared with age-matched non-obese rats (C). Insulin sensitivity in whole body, glucose transporter 4 (GLUT4) protein content, glucose uptake and glycogen synthesis in oxidative skeletal muscle and phospho-glycogen synthase kinase (p-GSK3) and glycogen content in liver were analysed. Results: Insulin sensitivity, analysed by the insulin tolerance test, was 30% lower in O than in C rats (p < 0.05), and OG rats recovered this parameter (p < 0.05). In oxidative muscle, glimepiride increased the GLUT4 protein content (50%, p < 0.001) and recovered the obesity-induced reduction (similar to 20%) of the in vitro insulin-stimulated glucose uptake and incorporation into glycogen. In liver, glimepiride increased p-GSK3 (p < 0.01) and glycogen (p < 0.05) contents. Conclusion: The increased GLUT4 protein expression and glucose utilization in oxidative muscle and the increased insulin sensitivity and glycogen storage in liver evidence the insulin-sensitizer effect of glimepiride, which must be important to enable the glimepiride drug to promote an efficient glycaemic control.

Increased SOD1 association with chromatin, DNA damage, p53 activation, and apoptosis in a cellular model of SOD1-linked ALS

Mutations in the gene encoding cytosolic Cu,Zn-superoxide dismutase (SOD1) have been linked to familial amyotrophic lateral sclerosis (FALS). However the molecular mechanisms of motor neuron death are multifactorial and remain unclear. Here we examined DNA damage;p53 activity and apoptosis in SH-SY5Y human neuroblastoma cells transfected to achieve low-level expression of either wild-type or mutant Gly(93) --> Ala (G93A) SOD1, typical of FALS. DNA damage was investigated by evaluating the levels of 8-oxo-7,8-dihydro-2`-deoxyguanosine (8-oxodGuo) and DNA strand breaks. Significantly higher levels of DNA damage, increased p53 activity, and a greater percentage of apoptotic cells were observed in SH-SY5Y cells transfected with G93A SOD1 when compared to cells overexpressing wild-type SOD1 and untransfected cells. Western blot, FACS, and confocal microscopy analysis demonstrated that G93A SOD1 is present in the nucleus in association with DNA. Nuclear G93A SOD1 has identical superoxide dismutase activity but displays increased peroxidase activity when compared to wild-type SOD1. These results indicate that the G93A mutant SOD1 association with DNA might induce DNA damage and trigger the apoptotic response by activating p53. This toxic activity of mutant SOD1 in the nucleus may play an important role in the complex mechanisms associated with motor neuron death observed in ALS pathogenesis. (C) 2010 Elsevier B.V. All rights reserved.

Wear of coated and uncoated PCBN cutting tool used in turning and milling

This licentiate thesis has the main focus on evaluation of the wear of coated and uncoated polycrystalline cubic boron nitride cutting tool used in cutting operations against hardened steel. And to exam the surface finish and integrity of the work material used. Harder work material, higher cutting speed and cost reductions result in the development of harder and more wear resistance cutting tools. Although PCBN cutting tools have been used in over 30 years, little work have been done on PVD coated PCBN cutting tools. Therefore hard turning and hard milling experiments with PVD coated and uncoated cutting tools have been performed and evaluated. The coatings used in the present study are TiSiN and TiAlN. The wear scar and surface integrity have been examined with help of several different characterization techniques, for example scanning electron microscopy and Auger electron spectroscopy.   The results showed that the PCBN cutting tools used displayed crater wear, flank wear and edge micro chipping. While the influence of the coating on the crater and flank wear was very small and the coating showed a high tendency to spalling. Scratch testing of coated PCBN showed that, the TiAlN coating resulted in major adhesive fractures. This displays the importance of understanding the effect of different types of lapping/grinding processes in the pre-treatment of hard and super hard substrate materials and the amount and type of damage that they can create. For the cutting tools used in turning, patches of a adhered layer, mainly consisting of FexOy were shown at both the crater and flank. And for the cutting tools used in milling a tribofilm consisting of SixOy covered the crater. A combination of tribochemical reactions, adhesive wear and mild abrasive wear is believed to control the flank and crater wear of the PCBN cutting tools. On a microscopic scale the difference phases of the PCBN cutting tool used in turning showed different wear characteristics. The machined surface of the work material showed a smooth surface with a Ra-value in the range of 100-200 nm for the turned surface and 100-150 nm for the milled surface. With increasing crater and flank wear in combination with edge chipping the machined surface becomes rougher and showed a higher Ra-value. For the cutting tools used in milling the tendency to micro edge chipping was significant higher when milling the tools steels showing a higher hard phase content and a lower heat conductivity resulting in higher mechanical and thermal stresses at the cutting edge.

Life situations and the care burden for stroke pa­tients and their informal caregivers in a prospective cohort study

Background. The purpose of this study was to analyse whether the parallel life situation between stroke patients and their informal caregivers (dyads) shown in cross-sectional studies prevails also in a longitudinal perspective. Methods. A total of 377 Swedish stroke patients, aged ‡65 years, and their 268 informal caregivers were followed from hospital admission and one year on. Analyses were based on patient interviews, functional ability (MMSE) score, Nottingham Health Profile (NHP) score, Hospital Anxiety and Depression (HAD) score, self-rated health score, and the Gothenburg Quality of Life (GQL) activity score. Similar information was obtained by postal questionnaires from informal caregivers, also including information on the nature and amount of assistance provided and on Caregiver Burden (CB) score. Results. Before index admission informal caregivers provided care on average 5 h per week and after discharge 11 h per week (P < 0.0001). Support volume was associated with patient sex (more for men), low patient’s functional ability, low received municipal social service support, closeness of patient–caregiver relation, and short distance to patient’s home. Significant positive associations within the dyads were found for HAD anxiety score (P < 0.0001), total NHP score (P < 0.0001), and GQL activity score (P < 0.0001) after adjustment for patient’s age, sex, functional ability, and patient–caregiver relationship. CB score increased with amount of informal caregiver support, patient’s age, and with low functional ability and low amount of municipal social service support. All these associations were constant across time. Conclusions. There was an association within the dyads regarding anxiety score, NHP score, and activity score. CB score was generally high.

Second generation European corn borer injury and Irish potato physiology, yield, and quality

European corn borer (ECB) [Ostrinia nubilalis (Hubner)] (Lepidoptera: Crambidae) is known to infest Irish potato (Solanum tuberosum L.) but only causes economic damage during the first generation in East Coast potato producing areas. However, in Nebraska, second generation ECB infest potato plants during the bulking period and may reduce yield and/or potato quality. Experiments were conducted in 2001, 2002, and 2003 to examine physiological and yield effects of second generation ECB injury to potato in Nebraska. Pike, Atlantic, and three Frito Lay proprietary varieties (FL1867, FL1879, and FL1833) were used. Experimental plots were infested with four ECB egg masses per plant to simulate ECB infestation by second-generation larvae; controls received no egg masses. Photosynthetic rates, tuber weights, tuber size grades, solids, and fry quality were measured. Potato plants with ECB infestation had significantly reduced photosynthetic rates on ECB-infested stems and on uninfested stems on the same plant when larvae were in the fifth instar. When insects were in the fourth instar, photosynthetic rates were reduced only on ECB-infested stems. In 2001, ECB infestation reduced the average mass of large tubers and increased the amount of small tubers in FL1867 and FL1879. In 2002, significant yield reductions were not observed. Across both years, ECB-infested plots produced fewer large (65- to 100-mm diam.) tubers than control plots. Other tuber properties and chip qualities were unaffected. This study indicates that second generation ECB infestation of approximately 30% infested plants results in economic loss for some chipping varieties and affects tuber bulking. In contrast to east coast growers, Midwest potato farmers must be concerned with second generation ECB.

Morphological Aspects and Storage of Dypsis leptocheilos (Hodel) Beentje & J. Dransf. (Arecaceae) Seeds

Dypsis leptocheilos (Hodel) Beentje & J. Dransf. palms are widely used in landscaping, however there is a lack of studies about its biology, especially on the morphology of its seedling disseminules and the ideal seed storage time without loss of viability. The objectives of this work were to describe the morphological aspects and to study the storage effect on the germination of D. leptocheilos seeds. The experiments were performed at FCAV/UNESP, Jaboticabal Campus, São Paulo State, Brazil. In order to obtain a morphology description 100 disseminules were sowed in vermiculite. The external and internal sides of the disseminules as well as the representative phases of the germination process were sketched with the help of a light chamber attached to a stereomicroscope. Five treatments were arranged in order to study the storage effects on the seeds (four months of storage and straight after harvest), with four replicates with 25 disseminules each (seeds with attached endocarp) in a completely randomized design. The germination test was conducted over a 140 days period and noted every two days. In order to calculate the germination percentage (% G) and the Germination Speed Index (GSI), the seeds were considered germinated when the germinative button appeared. The data were submitted to a polynomial regression analysis to verify the behavior of the variables over the storage period. The D. leptocheilos seeds have rounded shape, ruminate endosperm and hard consistency. The embryo is lateral, peripheral and relatively undifferentiated, with approximately 3 mm long and conical shape. The germination percentage increased from 17% for seeds sowed straight after harvest to 73% for those stored over a three-month period. For the GSI the increase was about 0.85%. It was concluded that the germination of D. leptocheilos is of an adjacent ligulate type. Furthermore, the seeds stored for 3 months at 14 degrees C showed both higher percentage and germination speed.

Myocardial remodeling and dysfunction are induced by chronic food restriction in spontaneously hypertensive rats

Several studies have shown alterations in hearts from animals subjected to food restriction (FR). However, few experiments in hearts evaluating pressure overload have been reported. We examined the effects of chronic FR on myocardial function and morphology in spontaneously hypertensive rats (SHR). Sixty-day-old SHR were fed a control (C) or a restricted diet (daily intake reduced to 50% of amount of food consumed by the control group) for 90 days. Myocardial performance was studied in isolated left ventricular (LV) papillary muscle. Food restriction decreased body weight and LV weight; LV weight/body-weight ratio was lower in the food-restricted group (SHR-C, 2.84 +/- 0.21 mg/g; SHR-FR, 2.56 +/- 0.24 mg/g; P <.05). Food restriction did not change arterial systolic blood pressure. Myocyte surface area was lower in the food-restricted group (P <.01). Food restriction induced myocardial ultrastructural alterations including reduced sarcoplasm content, reduced and disorganized myofilaments, disorganized Z line, dilated sarcoplasmic reticulum, and deep infoldings of plasma membrane. Myocardial hydroxyproline concentration was increased in the restricted rats. Peak developed tension (P <.05) and maximum rate of tension development (P <.01) were decreased in the SHR-FR group. In conclusion, myocardium of SHR subjected to chronic FR presents attenuation of hypertrophy development, ultrastructural changes, increased collagen content, and systolic dysfunction. (c) 2006 Elsevier B.V. All rights reserved.

Experimental poisoning by Senecio brasiliensis in calves: quantitative and semi-quantitative study on changes in the hepatic extracellular matrix and sinusoidal cells

A matriz extracelular (MEC) desempenha um papel importante em lesões hepáticas crônicas e tem sido estudada em modelos de intoxicação experimental. em bovinos, no entanto, não há estudos específicos sobre a MEC hepática normal ou com lesões crônicas. Por isso, foi desenvolvido um modelo de intoxicação experimental hepático usando Senecio brasilliensis, uma planta que contém alcalóides pirrolizidínicos e causa lesão hepática dependente da dose. Cinco bezerros receberam por via oral, 0.38g/kg de folhas secas por 24 dias. Biópsias hepáticas foram obtidas a cada 15 dias durante 60 dias. Sinais clínicos de complicações digestivas surgiram da terceira semana do experimento. Um bezerro morreu aos 45 dias e os outros quatro foram avaliados até os 60 dias. As biópsias hepáticas foram processadas para microscopia óptica, imuno-histoquímica e microscopia eletrônica de transmissão. No trigésimo dia, as lesões hepáticas eram progessivas caracterizadas por vacuolização hepatocelular, necrose, apoptose, megalocitose, e fibrose centrolobular, pericelular e portal. Foram realizadas avaliações quantitativas e semi-quantitativas de componentes da MEC hepática antes e após o aparecimento das lesões. Foi realizada morfometria do colágeno total e do sistema de fibras elásticas. Colágeno total e colágenos tipos I e III aumentaram progressivamente em todos os locais do fígado. Mudanças na localização, quantidade e disposição do sistema de fibras elásticas foram também observadas. Houve um aumento significativo de células de Kupffer aos 30 dias e de células sinusoidais totais aos 45 e 60 dias. As lesões hepáticas neste experimento foram progressivas mesmo após a remoção da planta. Lesões de fibrose severa foram localizadas principalmente nos espaços porta, seguido por fibrose veno-oclusiva e pericelular. Os colágenos tipo I e tipo III foram observados no fígado normal e no fígado dos bezerros afetados, com predomínio do tipo I. Nos bezerros afetados o aumento do colágeno total e do sistema de fibras elásticas foi paralelo ao aumento no número das células sinusoidais.

Functional relationship between subfrnical organ cholinergic stimulation and nitrergic activation influencing cardiovascular and body fluid homeostasis

We have studied the effects of L-NG-nitro arginine methyl esther (L-NAME), L-arginine (LAR), inhibitor and a donating nitric oxide agent on the alterations of salivary flow, water intake, arterial blood pressure (MAP) and heart rate (HR) induced by the injection pilocarpine into the subfornical organ (SFO). Rats (Holtzman 250-300 g) were anesthetized with 2, 2, 2-tribromoethanol (20 mg/100 kg b. wt.) and a stainless steel carmula were implanted into their SFO. The volume of injection was 0.2 mu l. The amount of saliva secretion was studied over a 5-min period. Pilocarpine (40 mu g), L-NAME (40 mu g) and LAR (30 mu g) were used in all experiments for the injection into the SFO. Pilocarpine (10, 20, 40, 80 and 160 mu g) injected into SFO elicited a concentration-dependent increase in salivary secretion. L-NAME injected prior to pilocarpine into the SFO increased salivary secretion and water intake due to the effect of pilocarpine. LAR injected prior to pilocarpine into the SFO attenuated the salivary secretion and water intake. Pilocarpine, injected into the SFO increased the MAP and decreased heart rate (HR). L-NAME injected prior to pilocarpine into the SFO potentiated the pressor effect of pilocarpine with a decrease in HR. LAR injected into the SFO prior to pilocarpine attenuated the increase in MAP with no changes in HR. The present study suggests that the SFO nitrergic cells interfere in the cholinergic pathways implicated in the control of salivary secretion, fluid and cardiovascular homeostasis. (c) 2007 Elsevier B.V All rights reserved.

Morphologic and Pharmacological Investigations in the Epicatechin Gastroprotective Effect

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Associations of Forest Cover, Fragment Area, and Connectivity with Neotropical Understory Bird Species Richness and Abundance

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Pulpal temperature increase with high-speed handpiece, ER : YAG laser and ultrasound tips

The aim of this study was to compare intrapulpal temperature increase produced by high-speed handpiece, Er:YAG laser and CVDentus ultrasound tips during cavity preparation. Thirty bovine mandibular incisors with an enamel/dentin thickness of 4 mm at buccal surface had their roots amputated and were allocated to the following groups (n=10): Group I- high-speed handpiece; Group II- noncontact Er:YAG laser (250 mJ/4Hz); and Group III- CVDentus ultrasouns tips. All devices were used with water cooling. Class V cavities were prepared to a depth of 3.5 mm, measured with a periodontal probe. A type T thermocouple was placed inside the pulp chamber to determine the temperature increase (degrees C), which was recorded by a data acquisition system ADS 2000 IP (Lynx Technology) linked to a notebook computer. Data were analyzed statistically by oneway ANOVA and Tukey's test (p=0.05). The mean temperature rises were: 1.10 degrees C ( 0.56) for Group 1, 0.84 degrees C (0.55) for Group II, and 3.00 degrees C (1.34) for Group III. There were no statistically significant differences (p > 0.05) between Groups I and II, but both of them differed significantly from Group III (p < 0.05). In conclusion, the use of Er:YAG laser and high-speed handpiece for cavity preparation resulted in similar temperature increase. Although ultrasound tips generated significantly higher intrapulpal temperature increase, it remained below the critical value of 5.5 degrees C and may be considered safe for use.

The Influence of Cutting Speed and Cutting Initiation Location in Specimen Preparation for the Microtensile Bond Strength Test

Purpose: This study evaluated the effect of cutting initiation location and cutting speed on the bond strength between resin cement and feldspathic ceramic.Materials and Methods: Thirty-six blocks (6.4 x 6.4 x 4.8 mm) of ceramic (Vita VM7) were produced. The ceramic surfaces were etched with 10% hydrofluoric acid gel for 60 s and then silanized. Each ceramic block was placed in a silicon mold with the treated surface exposed. A resin cement (Variolink II) was injected into the mold over the treated surface and polymerized. The resin cement-ceramic blocks were divided into two groups according to experimental conditions: a) cutting initiation location - resin cement, ceramic and interface; and b) cutting speed - 10,000, 15,000, and 20,000 rpm. The blocks were sectioned to achieve non-trimmed bar specimens. The microtensile test was performed in a universal testing machine (1 mm/min). The failure modes were examined using an optical light microscope and SEM. Bond strength results were analyzed using one-way ANOVA and Tukey's test (alpha = 0.05).Results: Significant influences of cutting speed and initiation location on bond strength (p < 0.05) were observed. The highest mean was achieved for specimens cut at 15,000 rpm at the interface (15.12 +/- 5.36 MPa). The lowest means were obtained for specimens cut at the highest cutting speed in resin cement (8.50 +/- 3.27 MPa), and cut at the lowest cutting speed in ceramic (8.60 +/- 2.65MPa). All groups showed mainly mixed failure (75% to 100%).Conclusion: The cutting speed and initiation location are important factors that should be considered during specimen preparation for microtensile bond strength testing, as both may influence the bond strength results.

Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures

Statement of problem. Titanium has physical and mechanical properties, which have led to its increased use in dental prostheses despite casting difficulties due to high melting point and formation of oxide layers which affect the metal-ceramic bond strength.Purpose. This in vitro study evaluated the shear bond strength of the interface of 2 dental porcelains and pure titanium injected into a mold at 3 different temperatures.Material and methods. Using commercially pure (cp) titanium bars (Titanium, Grade I) melted at 1668degreesC and cast at mold temperatures of 430degreesC, 700degreesC or 900degreesC, 60 specimens were machined to 4 x 4 mm, with a base of 5 x 1 mm. The 4-mm surfaces were airborne-particle abraded with 100 mum aluminum oxide before applying and firing the bonding agent and evaluating the 2 porcelains (Triceram/Triline ti and Vita Titankeramik). Ten specimens were prepared for each temperature and porcelain combination Shear bond testing was performed in a universal testing machine, with a 500-kg load cell and crosshead speed of 0.5 mm/min. The specimens were loaded until failure. The interfaces of representative fractured specimens of each temperature were examined with a scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). Data for shear bond strength (MPa) were statistically analyzed by 2-way ANOVA and the Tukey test (alpha = .05).Results. The results showed significant differences for the metal/porcelain interaction effect (P = .0464). There were no significant differences for the 2 porcelains (P = .4250). The Tukey test showed a significant difference between the pair cp Ti 430degreesC Triceram and cp Ti 900degreesC Triceram, with respective mean values and SDs of 59.74 +/- 11.62 and 34.03 +/- 10.35 MPa.Conclusion. Triceram porcelain showed a bond strength decrease with an increase in the mold temperature for casting titanium. The highest bond strength for Vita porcelain and the best metal-ceramic interface observed with the SEM were found with the mold temperature of 700degreesC.

Validity of the critical speed to determine blood lactate response and aerobic performance in swimmers aged 10-15 years

Introduction - the aim of this study was to analyze the validity of the critical speed (CS) to determine the speed corresponding to 4 mmol 1(-1) of blood lactate (S4) and the speed in a 30 min test (S30min) of swimmers aged 10-15 years.Synthesis of facts - CS, S4 and S30min were determined in 12 swimmers (eight boys and four girls) divided into two groups: 10-12 years and 13-15 years.Conclusion - CS was a good predictor of aerobic performance (S30min) independent of the chronological age, providing practical information about the aerobic performance state of young swimmers. (C) 2002, Editions scientifiques et medicates, Elsevier SAS. All rights reserved.