The effect of strain softening in the matrix material during void growth

Furthermore, the compressed flow driven by the piston is discussed. The consistent solution of gasdynamical equations including solar gravity is obtained for the unsteady and two-dimensional configuration, which is applied to the region between the piston and shock wave. This solution may satisfy the jump conditions of shock wave, which separates the region of compressed flow and quiet corona.

第十四届国际材料强度大会简介

2006年6月5—9日，第十四届国际材料强度大会（14th International Conferenceon the Strength of Materials，IC-SMA14）在西安古都新世界大酒店举行，会议正式代表322人（其中境外代表200多人），这是该系列国际材料强度大会第一次在中国举办．大会由中国国家自然科学基金委员会、国家教育部、中国材料研究学会、西安交通大学、中国科学院沈阳金属研究所和西安市科技局等单位共同支持．大会主席为J．L．Martin教授，会议组织委员会主席由西安交通大学的孙军教授与中国科学院金属研究所的李守新研究员共同担任．

The Cryo-EM Structure of a Complete 30S Translation Initiation Complex from Escherichia coli

11 p.

Effects of Thermocapillary Convection on the Growth Process in Industrial 8-inch Silicon Czochralski Growth

Czochralski (CZ) crystal growth process is a widely used technique in manufacturing of silicon crystals and other semiconductor materials. The ultimate goal of the IC industry is to have the highest quality substrates, which are free of point defect, impurities and micro defect clusters. The scale up of silicon wafer size from 200 mm to 300 mm requires large crucible size and more heat power. Transport phenomena in crystal growth processes are quite complex due to melt and gas flows that may be oscillatory and/or turbulent, coupled convection and radiation, impurities and dopant distributions, unsteady kinetics of the growth process, melt crystal interface dynamics, free surface and meniscus, stoichiometry in the case of compound materials. A global model has been developed to simulate the temperature distribution and melt flow in an 8-inch system. The present program features the fluid convection, magnetohydrodynamics, and radiation models. A multi-zone method is used to divide the Cz system into different zones, e.g., the melt, the crystal and the hot zone. For calculation of temperature distribution, the whole system inside the stainless chamber is considered. For the convective flow, only the melt is considered. The widely used zonal method divides the surface of the radiation enclosure into a number of zones, which has a uniform distribution of temperature, radiative properties and composition. The integro-differential equations for the radiative heat transfer are solved using the matrix inversion technique. The zonal method for radiative heat transfer is used in the growth chamber, which is confined by crystal surface, melt surface, heat shield, and pull chamber. Free surface and crystal/melt interface are tracked using adaptive grid generation. The competition between the thermocapillary convection induced by non-uniform temperature distributions on the free surface and the forced convection by the rotation of the crystal determines the interface shape, dopant distribution, and striation pattern. The temperature gradients on the free surface are influenced by the effects of the thermocapillary force on the free surface and the rotation of the crystal and the crucible.

Molecular dynamics studies of brittle fracture of SiO2

By applying for molecular dynamics (MD) simulation and Griffith fracture criterion, the brittle behavior of crack extension of mode I type is investigated. The critical stress intensity factor (SIF)K-Ic(MD) of crack extension is calculated, and the evolution of atoms near crack tip is observed. It is found that K-Ic(MD) is in good agreement with the Griffith ftacture criterion K-Ic(Griffith).

SU-8 microprobes for biomedical applications

152 p. : il.

Clinical factors associated with a Candida albicans Germ Tube Antibody positive test in Intensive Care Unit patients

Background: Poor outcomes of invasive candidiasis (IC) are associated with the difficulty in establishing the microbiological diagnosis at an early stage. New scores and laboratory tests have been developed in order to make an early therapeutic intervention in an attempt to reduce the high mortality associated with invasive fungal infections. Candida albicans IFA IgG has been recently commercialized for germ tube antibody detection (CAGTA). This test provides a rapid and simple diagnosis of IC (84.4% sensitivity and 94.7% specificity). The aim of this study is to identify the patients who could be benefited by the use of CAGTA test in critical care setting. Methods: A prospective, cohort, observational multicentre study was carried out in six medical/surgical Intensive care units (ICU) of tertiary-care Spanish hospitals. Candida albicans Germ Tube Antibody test was performed twice a week if predetermined risk factors were present, and serologically demonstrated candidiasis was considered if the testing serum dilution was >= 1: 160 in at least one sample and no other microbiological evidence of invasive candidiasis was found. Results: Fifty-three critically ill non-neutropenic patients (37.7% post surgery) were included. Twenty-two patients (41.5%) had CAGTA-positive results, none of them with positive blood culture for Candida. Neither corrected colonization index nor antifungal treatment had influence on CAGTA results. This finding could corroborate that the CAGTA may be an important biomarker to distinguish between colonization and infection in these patients. The presence of acute renal failure at the beginning of the study was more frequent in CAGTA-negative patients. Previous surgery was statistically more frequent in CAGTA-positive patients. Conclusions: This study identified previous surgery as the principal clinical factor associated with CAGTA-positive results and emphasises the utility of this promising technique, which was not influenced by high Candida colonization or antifungal treatment. Our results suggest that detection of CAGTA may be important for the diagnosis of invasive candidiasis in surgical patients admitted in ICU.

Efectos del entrenamiento interválico en personas con insuficiencia cardiaca

El objetivo de esta revisión es conocer en profundidad la patología de la insuficiencia cardiaca (IC), así como el tratamiento de la misma a través del entrenamiento aeróbico interválico de alta intensidad (HIIT). La IC se define como el estado fisiopatológico y clínico en el cual el corazón es incapaz de aportar sangre de acuerdo a los requerimientos metabólicos periféricos o que lo hace con presiones de llenado elevadas (Jalil, 2012). Resulta de especial relevancia el tratamiento de dicha enfermedad de manera no farmacológica, destacando el tratamiento mediante entrenamiento aeróbico como uno de los más eficaces y con menores efectos secundarios que existen. Tras analizar los principales métodos de entrenamiento aeróbico (continuo e interválico), y su influencia en la mejora de los pacientes, se ha presentado el HIIT como aquel que provoca mayores beneficios. Cabe destacar también la eficiencia de este método, ya que implica un menor volumen total de ejercicio físico, resultando en una percepción del esfuerzo reducida por aquellos que lo realizan, aumentando así la adherencia al ejercicio.

Dense, efficient chip-to-chip communication at the extremes of computing

The scalability of CMOS technology has driven computation into a diverse range of applications across the power consumption, performance and size spectra. Communication is a necessary adjunct to computation, and whether this is to push data from node-to-node in a high-performance computing cluster or from the receiver of wireless link to a neural stimulator in a biomedical implant, interconnect can take up a significant portion of the overall system power budget. Although a single interconnect methodology cannot address such a broad range of systems efficiently, there are a number of key design concepts that enable good interconnect design in the age of highly-scaled CMOS: an emphasis on highly-digital approaches to solving ‘analog’ problems, hardware sharing between links as well as between different functions (such as equalization and synchronization) in the same link, and adaptive hardware that changes its operating parameters to mitigate not only variation in the fabrication of the link, but also link conditions that change over time. These concepts are demonstrated through the use of two design examples, at the extremes of the power and performance spectra.

A novel all-digital clock and data recovery technique for high-performance, high density interconnect has been developed. Two independently adjustable clock phases are generated from a delay line calibrated to 2 UI. One clock phase is placed in the middle of the eye to recover the data, while the other is swept across the delay line. The samples produced by the two clocks are compared to generate eye information, which is used to determine the best phase for data recovery. The functions of the two clocks are swapped after the data phase is updated; this ping-pong action allows an infinite delay range without the use of a PLL or DLL. The scheme's generalized sampling and retiming architecture is used in a sharing technique that saves power and area in high-density interconnect. The eye information generated is also useful for tuning an adaptive equalizer, circumventing the need for dedicated adaptation hardware.

On the other side of the performance/power spectra, a capacitive proximity interconnect has been developed to support 3D integration of biomedical implants. In order to integrate more functionality while staying within size limits, implant electronics can be embedded onto a foldable parylene (‘origami’) substrate. Many of the ICs in an origami implant will be placed face-to-face with each other, so wireless proximity interconnect can be used to increase communication density while decreasing implant size, as well as facilitate a modular approach to implant design, where pre-fabricated parylene-and-IC modules are assembled together on-demand to make custom implants. Such an interconnect needs to be able to sense and adapt to changes in alignment. The proposed array uses a TDC-like structure to realize both communication and alignment sensing within the same set of plates, increasing communication density and eliminating the need to infer link quality from a separate alignment block. In order to distinguish the communication plates from the nearby ground plane, a stimulus is applied to the transmitter plate, which is rectified at the receiver to bias a delay generation block. This delay is in turn converted into a digital word using a TDC, providing alignment information.

Wireless parylene-based retinal implant

The degeneration of the outer retina usually causes blindness by affecting the photoreceptor cells. However, the ganglion cells, which consist of optic nerves, on the middle and inner retina layers are often intact. The retinal implant, which can partially restore vision by electrical stimulation, soon becomes a focus for research. Although many groups worldwide have spent a lot of effort on building devices for retinal implant, current state-of-the-art technologies still lack a reliable packaging scheme for devices with desirable high-density multi-channel features. Wireless flexible retinal implants have always been the ultimate goal for retinal prosthesis. In this dissertation, the reliable packaging scheme for a wireless flexible parylene-based retinal implants has been well developed. It can not only provide stable electrical and mechanical connections to the high-density multi-channel (1000+ channels on 5 mm × 5 mm chip area) IC chips, but also survive for more than 10 years in the human body with corrosive fluids.

The device is based on a parylene-metal-parylene sandwich structure. In which, the adhesion between the parylene layers and the metals embedded in the parylene layers have been studied. Integration technology for high-density multi-channel IC chips has also been addressed and tested with dummy and real 268-channel and 1024-channel retinal IC chips. In addition, different protection schemes have been tried in application to IC chips and discrete components to gain the longest lifetime. The effectiveness has been confirmed by the accelerated and active lifetime soaking test in saline solution. Surgical mockups have also been designed and successfully implanted inside dog's and pig's eyes. Additionally, the electrodes used to stimulate the ganglion cells have been modified to lower the interface impedance and shaped to better fit the retina. Finally, all the developed technologies have been applied on the final device with a dual-metal-layer structure.

Fatores sociodemográficos associados à laqueadura tubária entre funcionárias de uma universidade pública do Estado do Rio de Janeiro : estudo Pró-Saúde

Este estudo busca avaliar a associação entre a esterilização por ligadura tubária e alguns fatores sociodemográficos. Para tal, um estudo de corte transversal envolvendo 2240 funcionárias técnico-administrativas de uma Universidade Pública do Estado do Rio de Janeiro foi realizado em 1999. Apesar de um pouco mais baxa que a taxa brasileira, a prevalência de esterilizações encontrada neste grupo foi elevada (27,3%). A média de idade da mulher no momento da esterilização não foi baixa, sendo de aproximadamente 32 anos; 13% das funcionárias foram esterilizadas antes dos 26 anos e 63,1% entre os 26 e 34 anos. Os resultados sugerem associação entre a ligadura tubária e a baixa renda familiar (OR= 1,71; IC 95%: 1,22 2,39).

Prevalência de sobrepeso e obesidade em adolescentes das regiões Nordeste e Sudeste do Brasil, 1996-1997

A questão nutricional tem sido objeto de interesse da saúde pública, não só em nosso país, como também em outros, independentemente dos diferentes níveis de desenvolvimento. O sobrepeso e a obesidade são considerados agravos nutricionais importantes, cuja frequência vem aumentando entre adolescentes, acarretando consequências negativas, imediatas ou futuras, para a saúde. Este estudo pretende descrever a prevalência de sobrepeso e obesidade em adolescentes, segundo o sexo, nas regiões Nordeste e Sudeste do Brasil, e investigar a sua reação com fatores socioeconômicos e com a prática de atividade física. A investigação tem como base os dados da Pesquisa sobre Padrões de Vida (PPV) do IBGE, realizada entre março de 1995 e março de 1997, nas duas regiões. Dadas as peculiaridades de crescimento e desenvolvimento durante essa fase da vida, somados a ausência de dados sobre maturação sexual, optou-se por incluir os dados de adolescentes de 15 a 19 anos de idade. A amostra contou com os dados de 1027 adolescentes da Região Nordeste e 854 da Região Sudeste com amplo predomínio numérico nas áreas urbanas em ambas regiões.O termo sobrepeso/obesidade foi utilizada para caracterizar os adolescentes que se encontravam com valores de índice de Massa Corporal (IMC) iguais ou acima do percentil 85, de acordo com o sexo e a idade, da distribuição de IMC da população norte americana (WHO, 1995). A análise estatística considerou os fatores de expansão e o desenho da amostra. A prevalência de sobrepeso/obesidade foi de 8,45% IC 95% 6,51-10,90) na Região Nordeste, contra 11,53% (IC 95% 8,90- 14,81) na Região Sudeste. No Nordeste, observou-se maior risco de sobrepeso/obesidade para adolescentes do sexo feminino (razão de prevalência: RP meninas/meninos=3,00; IC 95% 1,73-5,22), situação que se manteve entre os residentes da área urbana (RPr3,21; IC 95% 1,72-5,99) e os da área rural (RP=2,27; IC 95% 0,68-7,60). Na Região Sudeste, o risco de sobrepeso/obesidade foi maior entre os meninos (RP meninas/meninos=0,58; IC 95% 0,37-0,92). Ao se estratificarem os dados por situação de moradia, os residentes da área urbana desta região mantiveram essa diminuição entre meninas (RPO,51; IC 95% 0,31-0,85), porém na área rural houve aumento de risco entre as meninas (RP=1 86; IC 95% 0,83-4,16). A renda per capita domiciliar mensal só associou ao risco de sobrepeso/obesidade, em ambas as regiões, apenas entre as meninos de maior renda per capita domiciliar mensal, quando comparados aos de renda inferior (Região Nordeste: OR bruto=9,64; IC 95% 3,17-29,35 e CR ajustado=10,13; IC 95% 2,83-36,27 e, na Região Sudeste: OR bruto13; IC 95% 1,50-17,48 e OR ajustado=8,70; IC 95% 1,17-32,34). Embora tenha sido observada grande frequência de sedentarismo entre as meninas, a realização de atividade física não se associou a prevalência do sobrepeso/obesidade em nenhuma das regiões estudadas. Os resultados apontam para a necessidade de medidas do controle dessas condições, visando a prevenção de doenças crônicas, bem como da condução de estudos que aprofundem as questões associadas ao risco de sobrepeso/obesidade entre os adolescentes de diferentes regiões do país.