Is the flow tube reactor with NO2 titration a reliable absolute source for atomic hydrogen?

The H+NO2 titration scheme for the determination of atomic hydrogen densities within a microwave excited flow tube reactor has been investigated by laser-induced fluorescence spectroscopy in the vacuum UV. Absolute hydrogen densities are determined on the basis of calibration by Rayleigh scattering from argon. The measurement is performed at a gas mixture containing 0.5% of D2 added to the main gas H2. The ground state density of the hydrogen atoms generated in the flow tube reactor was inferred from the fluorescence radiation of the spectrally shifted optically thin D-Lyman-a transition.

HTS Machines as Enabling Technology for All-Electric Airborne Vehicles

Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development.

HTS Motors in Aircraft Propulsion: Design Considerations

Current high temperature superconducting (HTS) wires exhibit high current densities enabling their use in electrical rotating machinery. The possibility of designing high power density superconducting motors operating at reasonable temperatures allows for new applications in mobile systems in which size and weight represent key design parameters. Thus, all-electric aircrafts represent a promising application for HTS motors. The design of such a complex system as an aircraft consists of a multi-variable optimization that requires computer models and advanced design procedures. This paper presents a specific sizing model of superconducting propulsion motors to be used in aircraft design. The model also takes into account the cooling system. The requirements for this application are presented in terms of power and dynamics as well as a load profile corresponding to a typical mission. We discuss the design implications of using a superconducting motor on an aircraft as well as the integration of the electrical propulsion in the aircraft, and the scaling laws derived from physics-based modeling of HTS motors.

Synthesis and SAR of novel, non-MPEP chemotype mGluR5 NAMs identified by functional HTS

This Letter describes the discovery and SAR of three novel series of mGluR5 non-competitive antagonists/negative allosteric modulators (NAMs) not based on manipulation of an MPEP/MTEP chemotype identified by a functional HTS approach. This work demonstrates fundamentally new mGluR5 NAM chemotypes with submicromolar potencies, and further examples of a mode of pharmacology 'switch' to provide PAMs with a non-MPEP scaffold. (C) 2009 Elsevier Ltd. All rights reserved.

Synthesis and SAR of novel, 4-(phenylsulfamoyl)phenylacetamide mGlu(4) positive allosteric modulators (PAMs) identified by functional high-throughput screening (HTS)

Herein we disclose the synthesis and SAR of a series of 4-(phenylsulfamoyl)phenylacetamide compounds as mGlu(4) positive allosteric modulators (PAMs) that were identified via a functional HTS. An iterative parallel approach to these compounds culminated in the discovery of VU0364439 (11) which represents the most potent (19.8 nM) mGlu(4) PAM reported to date. (C) 2010 Elsevier Ltd. All rights reserved.

Response of red blood cell folate to intervention: implications for folate recommendations for the prevention of neural tube defects

Committees worldwide have set almost identical folate recommendations for the prevention of the first occurrence of neural tube defects (NTDs). We evaluate these recommendations by reviewing the results of intervention studies that examined the response of red blood cell folate to altered folate intake. Three options are suggested to achieve the extra 400 mu g folic acid/d being recommended by the official committees: increased intake of folate-rich foods, dietary folic acid supplementation, and folic acid fortification of food. A significant increase in foods naturally rich in folates was shown to be a relatively ineffective means of increasing red blood cell folate status in women compared with equivalent intakes of folic acid-fortified food, presumably because the synthetic form of the vitamin is more stable and more bioavailable. Although folic acid supplements are highly effective in optimizing folate status, supplementation is not an effective strategy for the primary prevention of NTDs because of poor compliance. Thus, food fortification is seen by many as the only option likely to succeed. Mandatory folic acid fortification of grain products was introduced recently in the United States at a level projected to provide an additional mean intake of 100 mu g folic acid/d, but some feel that this policy does not go far enough. A recent clinical trial predicted that the additional intake of folic acid in the United States will reduce NTDs by >20%, whereas 200 mu g/d would be highly protective and is the dose also shown to be optimal in lowering plasma homocysteine, with possible benefits in preventing cardiovascular disease. Thus, an amount lower than the current target of an extra 400 mu g/d may be sufficient to increase red blood cell folate to concentrations associated with the lowest risk of NTDs, but further investigation is warranted to establish the optimal amount.

Fortification with low amounts of folic acid makes a significant difference in folate status in young women: implications for the prevention of neural tube defects

Background: Mandatory fortification of grain products with folic acid was introduced recently in the United States, a policy expected to result in a mean additional intake of 100 mu g/d. One way of predicting the effectiveness of this measure is to determine the effect of removing a similar amount of folic acid as fortified food from the diets of young women who had been electively exposed to chronic fortification.

Objective: The objective was to examine the effect on folate status of foods fortified with low amounts of folic acid.

Design: We investigated the changes in dietary intakes and in red blood cell and serum concentrations of folate in response to removing folic acid-fortified foods for 12 wk from the diets of women who reportedly consumed such foods at least once weekly (consumers).

Results: Consumers (n = 21) had higher total folate intakes (P = 0.002) and red blood cell folate concentrations (P = 0.023) than nonconsumers (women who consumed folic acid-fortified foods less than once weekly; n = 30). Of greater interest, a 12-wk intervention involving the exclusion of these foods resulted in a decrease in folate intake of 78 +/- 56 mu g/d (P < 0.001), which was reflected in a significant reduction in red blood cell folate concentrations (P < 0.05).

Conclusions: Cessation of eating folic acid-fortified foods resulted in removing 78 mu g folic acid/d from the diet. Over 12 wk this resulted in a lowering of red blood cell folate concentrations by 111 nmol/L (49 mu g/L). This magnitude of change in folate status in women can be anticipated as a result of the new US fortification legislation and is predicted to have a significant, although not optimal, effect in preventing neural tube defects.

Effect of increasing dietary folate on red-cell folate: Implications for prevention of neural tube defects

Background Recommendations by the UK Department of Health suggest that protection from neural tube defects (NTD) can be achieved through intakes of an extra 400 mu g daily of folate/folic acid as natural food, foods fortified with folic acid, or supplements. The assumption is that all three routes of intervention would have equal effects on folate status.

Methods We assessed the effectiveness of these suggested routes of intervention in optimising folate status. 62 women were recruited from the University staff and students to take part in a 3-month intervention study. Participants were randomly assigned to one of the following five groups: folic acid supplement (400 mu g/day; I); folic-acid-fortified foods (an additional 400 mu g/day; II); dietary folate (an additional 400 mu g/day; III); dietary advice (IV), and control (V). Responses to intervention were assessed as changes in red-cell folate between preintervention and postintervention values.

Findings 41 women completed the intervention study. Red-cell folate concentrations increased significantly over the 3 months in the groups taking folic acid supplements (group I) or food fortified with folic acid (group II) only (p<0.01 for both groups). By contrast, although aggressive intervention with dietary folate (group III) or dietary advice (group IV) significantly increased intake of food folate (p<0.001 and p<0.05, respectively), there was no significant change in folate status.

Interpretation We have shown that compared with supplements and fortified food, consumption of extra folate as natural food folate is relatively ineffective at increasing folate status. We believe that advice to women to consume folate-rich foods as a means to optimise folate status is misleading.

Novel semi-interpenetrating hydrogel networks with enhanced mechanical properties and thermoresponsive engineered drug delivery, designed as bioactive endotracheal tube biomaterials

Thermoresponsive polymeric platforms are used to optimise drug delivery in pharmaceutical systems and bioactive medical devices. However, the practical application of these systems is compromised by their poor mechanical properties. This study describes the design of thermoresponsive semi-interpenetrating polymer networks (s-IPNs) based on cross-linked p(NIPAA) or p(NIPAA-co-HEMA) hydrogels containing poly(e-caprolactone) designed to address this issue. Using DSC, the lower critical solution temperature of the co-polymer and p(NIPAA) matrices were circa 34 °C and 32 °C, respectively. PCL was physically dispersed within the hydrogel matrices as confirmed using confocal scanning laser microscopy and DSC and resulted in marked changes in the mechanical properties (ultimate tensile strength, Young's modulus) without adversely compromising the elongation properties. P(NIPAA) networks containing dispersed PCL exhibited thermoresponsive swelling properties following immersion in buffer (pH 7), with the equilibrium-swelling ratio being greater at 20 °C than 37 °C and greatest for p(NIPAA)/PCL systems at 20 °C. The incorporation of PCL significantly lowered the equilibrium swelling ratio of the various networks but this was not deemed practically significant for s-IPNs based on p(NIPAA). Thermoresponsive release of metronidazole was observed from s-IPN composed of p(NIPAA)/PCL at 37 °C but not from p(NIPAA-co-HEMA)/PCL at this temperature. In all other platforms, drug release at 20 °C was significantly similar to that at 37 °C and was diffusion controlled. This study has uniquely described a strategy by which thermoresponsive drug release may be performed from polymeric platforms with highly elastic properties. It is proposed that these materials may be used clinically as bioactive endotracheal tubes, designed to offer enhanced resistance to ventilator associated pneumonia, a clinical condition associated with the use of endotracheal tubes where stimulus responsive drug release from biomaterials of significant mechanical properties would be advantageous. © 2012 Elsevier B.V. All rights reserved.