Working paper on the eLAC 2018 Digital Agenda in consideration of Caribbean priorities for technology-supported development

eLAC 2018 will coordinate the implementation of programmes to support the use of information and communications technologies (ICTs) in achieving social and economic development goals for Latin America in the Caribbean during the 2015-2018 timeframe. The conceptual framework for this programme of work is described by the eLAC 2018 Digital Agenda, which is anticipated to be ratified by the fifth Ministerial Conference on the Information Society in Latin America and the Caribbean, to be held in August 2015 in Mexico City. There is a need for broader input from Caribbean countries to the eLAC 2018 Digital Agenda. Accordingly, this working paper reviews the document’s current draft, considering each of its objectives in the context of Caribbean development needs. Amendments are recommended to 12 of the objectives. Two additional objectives are also proposed, in the areas of regional coordination on universal service funds, and the establishment of a spatial data infrastructure to support the use of geographic information systems. Representatives of Caribbean countries are invited to use the contents of this document as an input to the development of their own proposed amendments for inclusion in the final version of the eLAC 2018 Digital Agenda.

The red badge of courage: uma análise descritiva de suas traduções no Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Regional approaches to e-government initiatives in the Caribbean

This paper examines the potential benefits and challenges of regionally managed e-government development initiatives. It examines the current state of e-government in four Caribbean countries – Barbados, Jamaica, Saint Vincent and the Grenadines, and Trinidad and Tobago – in order to establish a broader understanding of the challenges that face e-government initiatives in the region. It also reviews a number of e-government initiatives that have been undertaken through projects managed at a regional level. Based on this analysis, it presents a set of best practices that are recommended to agencies engaged in the task of coordinating the implementation of regionally-based e-government initiatives.

Greening the campus of a Brazilian university: cultural challenges

Purpose - This study examined the relationship between environmental management practices developed at a campus of a Brazilian university (University of Sao Paulo) and the greening of its organizational culture. The paper aims to discuss these issues.Design/methodology/approach - This article presents a theoretical background based on the concepts of environmental management, organizational culture and environmental management in higher education institutions. The main framework of this research is the model proposed by Harris and Crane.Findings - The studied university has an environmental management program that is sometimes constrained in the following ways: the university bureaucracy and hierarchy; the main performance indicators for lecturers and professors are based on scientific production and publication, giving them little time for complementary activities; and some units develop their own environmental management practices, but they are not disseminated as best practices for use by other units. Some academic units showcase the proactive actions of professors who incorporate environmental management into their daily activities. The general perception is that the phrase environmental management is almost synonymous with solid waste management.Originality/value - This research details the first Brazilian application of the Harris and Crane model. It contributes an original analysis of environmental management and green organizational culture of a Brazilian university, an organizational type that has seldom been studied to date.

Jogo de papéis e linguagem: diálogos possíveis entre Vigotski e Bakhtin

In this paper we present ongoing research in which we approach the regulatory role of language in role play in children aged six and seven. In research, we seek an understanding of the relationship between language, ownership and complexity of the children's game. The hypothesis guiding the research is that the dialogical relations between children and adults and among children, while playing, contribute to children's learning game. Procedures are being used interpretive ethnographic research that focuses on the human meaning of social relations, waged by the subjects in a particular historical context and its elucidation and exposition by one researcher. This approach allows closer studies of Vygotsky and Bakhtin scholars of language that emphasize the regulatory role of language in human relationships and value the dialogic exchange between researcher and researched; active subjects of the research process. The data were produced by means of observation and interview, in a field diary records, photographs and audio recordings. They are being screened in thematic groups and analyzed using interpretative narration. The participants were two teachers and two classes of the first year of an Elementary school (EMEF) School of Municipal Elementary School Crane, State of Sao Paulo, totaling 45 subjects. Bearing in mind the above assumptions, are presented and analyzed data that allow to anticipate some results.

SPECT (Single photon emission tomography): Gama câmara, reconstrução tomográfica e características funcional

The SPECT (Single Photon Emission Computed Tomography) systems are part of a medical image acquisition technology which has been outstanding, because the resultant images are functional images complementary to those that give anatomic information, such as X-Ray CT, presenting a high diagnostic value. These equipments acquire, in a non-invasive way, images from the interior of the human body through tomographic mapping of radioactive material administered to the patient. The SPECT systems are based on the Gamma Camera detection system, and one of them being set on a rotational gantry is enough to obtain the necessary data for a tomographic image. The images obtained from the SPECT system consist in a group of flat images that describe the radioactive distribution on the patient. The trans-axial cuts are obtained from the tomographic reconstruction techniques. There are analytic and iterative methods to obtain the tomographic reconstruction. The analytic methods are based on the Fourier Cut Theorem (FCT), while the iterative methods search for numeric solutions to solve the equations from the projections. Within the analytic methods, the filtered backprojection (FBP) method maybe is the simplest of all the tomographic reconstruction techniques. This paper's goal is to present the operation of the SPECT system, the Gamma Camera detection system, some tomographic reconstruction techniques and the requisites for the implementation of this system in a Nuclear Medicine service

Modelos de tratamento para adenocarcinomas de próstata tratados por radioterapia conformacional 3D

Radiotherapy is a branch of medical physics related to the treatment of malignant neoplasm, being an important instrument in the fight against cancer, when combined with the effort of a multidisciplinary team, composed of, physicians, physicists, nurses and technicians. Every year more than 3.5 million new cases of cancer are recorded in the world, being the prostate cancer responsible for approximately 25% of this amount (INCA and IARC, 2008). In this type of cancer, radiotherapy is a method indicated for treatement. The technological advance in this area over years has allowed a greater accuracy in the tumor location, more conformation of the radiation beam around the tumor, reducing the dose in healthy tissues and a consequent dose increase on treatment (Bedford et al., 1999). A radiotherapy planning, in which the physicist develops an important role, is composed of several steps, including choosing the best configuration of treatment beams. This choice has a close relationship with success of therapy and is critical to achieve the best distribution of dose inside the tumor and expose the least as possible the healthy tissue to radiation. In this work, two options for setting up camps in the first phase in a treatment of prostate cancer were simulated in computer planning: 4 fields orthogonal or “Box” with gantry angles in 00, 1800, 2700 e 90° and 4 fields angled or “X” (1350, 450, 3150 e 2250). The percentage of the rectal volume exposed to 40, 50, 60, 72 and 76 Gy should be limited to 60, 50, 25, 15 and 5% respectively (Greco et al., 2003). The femoral toxicity have limited dose by 70% of the total dose prescribed in a prostate treatment (Bedford et al., 1999). The planning of 27 patients with prostate adenocarcinoma submitted to 3D conformal radiotherapy were accompanied. As a result, it was assessed that the best TCP (tumor control probability)... (Complete abstract click electronic access below)

Estudo de uma ponte rolante comercial no transportede bobina de aço de 12 toneladas

This work aims to determine the stresses acting on the main beam of a crane to transport steel coils of up to twelve tons. To determine the stress it was made a revision of the knowledge of the mechanics of materials to apply the analytical method. Following a review of the finite element method is made to understand the same. To complete the study it was used the commercial software ANSYS to determine the stresses by finite element method, the program provides images that help to better understand the results obtained. With the results a comparison of the values of the tensions between the two methods (analytical and finite element) was made. To assist in the calculations it was used the NBR 8400, 1984 (Calculation of Lifting Equipment Load)

Gestão da Manutenção Centrada na Confiabilidade em Pontes Rolantes

The objective of this work is to perform a study applying the methodology of Reliability Centered Maintenance - MCC to a group of cranes belonging to Amsted -Maxion in Cruzeiro - SP. The work consists of a presentation of maintenance, the reasons why more and more people worry about maintenance, making a presentation on the types of maintenance, its peculiar characteristics and then do a study where you identified the functionality required by the equipment under study, identified failure modes and their probable causes, and then detail the effects and consequences of these failures. With that evaluate the criticality of these failures and identify the most significant consequences that affect safety, availability or cost of equipment operation and allow a selection of the most appropriate tasks for the identified failure modes. We will also present best crane equipment, its main components, verify that there was or not improvement in the machine after the application of MCC and make a current analysis of maintenance in Amsted -Maxion

Análise estática de um guindaste de torre, utilizando o método dos elementos finitos

The finite element method is of great importance for the development and analysis of a new product being designed or already on the market, and that requires some specific request or special application. The tower crane, being an essential equipment for modern construction to increase productivity and safety on construction sites, is required for many types of special applications day after day, in many kinds of work. Paying attention to this growing need for handling special projects for the tower crane, faced with the importance and necessity of development and improvement of knowledge in more accurate and practical calculation methods such as the finite element method , for greater agility and precision in the response to a new project. The tower crane is defined by the maximum load moment that it can act with a certain amount of load. The tower crane which will be analyzed in this work , for example, is a tower crane with a resulting capacity of 85 Metric Tons which are considered basic dimensions data of a fisical tower crane of a crane company Liebherr in Guaratinguetá . Thus, the project analysis will begin with the threedimensional representation of the crane lines with AutoCAD software , conversion of this model to the format accepted ANSYS Workbench and completion of 3D modeling of structural components in Design module ANSYS software. After structural modeling is completed, the simulation is performed in static simulation of ANSYS Workbench software mode. The standards will be adopted to DIN (Deutsches Institut für Normung) and EN 14439 (Europäische Normung 14439) and some NR 's related to specific security class of tower cranes, which will be referred throughout the work

Verificação de pilares metálicos compostos constituídos por perfis formados a frio por meio de programa computacional

In this work, we discuss the procedures adopted for the design of built-up columns (laced and battened columns). Built-up columns are widely used in steel construction generally when the compression forces are relatively low and the column buckling lengths are large. They are commonly used in industrial buildings, for example, as posts for cladding, or as columns supporting a crane girder. Unlike columns with full section, in the case of built-up columns, it is necessary to evaluate the shear stiffness. In fact, the shear strength leads to a significant reduction of the critical load. In the context of this work, the components of the columns (chords, diagonals, posts, etc.) are formed by cold-formed members. In order to systematize and rationalize the verification of the built-up columns, this work aim to develop a computer program based on the standards NBR 14762, NBR 6355 and Eurocode 3, basically the considerations of the part EN 1993-1-1

Refuge Update – September/October 2008, Volume 5, Number 5

Table of Contents: Rebuilding after Hurricane Ike, page 3 Texas and Louisiana refuges were severely damaged in mid-September. A Crane Species Rebounding, page 5 At a Mississippi refuge, the world’s longest-running crane reintroduction program is succeeding. Focus on. . . Refuge System Wetlands, pages 8-13 The Refuge System manages wetlands to enhance their value for migratory waterfowl and shorebirds, threatened and endangered species and a myriad of native fish, wildlife, and plants. Fluttering Close to Extinction, page 17. Antioch Dunes Refuge is out to save the Lange’s metalmark butterfly.

Verificação de pilares metálicos compostos constituídos por perfis formados a frio por meio de programa computacional

In this work, we discuss the procedures adopted for the design of built-up columns (laced and battened columns). Built-up columns are widely used in steel construction generally when the compression forces are relatively low and the column buckling lengths are large. They are commonly used in industrial buildings, for example, as posts for cladding, or as columns supporting a crane girder. Unlike columns with full section, in the case of built-up columns, it is necessary to evaluate the shear stiffness. In fact, the shear strength leads to a significant reduction of the critical load. In the context of this work, the components of the columns (chords, diagonals, posts, etc.) are formed by cold-formed members. In order to systematize and rationalize the verification of the built-up columns, this work aim to develop a computer program based on the standards NBR 14762, NBR 6355 and Eurocode 3, basically the considerations of the part EN 1993-1-1

[Strategies for reducing the CT radiation dose]

The rapid technical advances in computed tomography have led to an increased number of clinical indications. Unfortunately, at the same time the radiation exposure to the population has also increased due to the increased total number of CT examinations. In the last few years various publications have demonstrated the feasibility of radiation dose reduction for CT examinations with no compromise in image quality and loss in interpretation accuracy. The majority of the proposed methods for dose optimization are easy to apply and are independent of the detector array configuration. This article reviews indication-dependent principles (e.g. application of reduced tube voltage for CT angiography, selection of the collimation and the pitch, reducing the total number of imaging series, lowering the tube voltage and tube current for non-contrast CT scans), manufacturer-dependent principles (e.g. accurate application of automatic modulation of tube current, use of adaptive image noise filter and use of iterative image reconstruction) and general principles (e.g. appropriate patient-centering in the gantry, avoiding over-ranging of the CT scan, lowering the tube voltage and tube current for survey CT scans) which lead to radiation dose reduction.

The association between life events and suicide intent in self-poisoners with and without a history of deliberate self-harm: a preliminary study

The associations between life events in the 12 months preceding an episode of self-poisoning resulting in hospital attendance (the index episode), and the suicide intent of this episode were compared in individuals for whom the index episode was their first, episode and in individuals in whom it was a recurrence of DSH. Results indicated a significant interaction between independent life events, repetition status, and gender in the prediction of suicide intent, the association between life events and intent being moderated by repetition status in women only. The results provide preliminary evidence to suggest the presence of a suicidal process in women, in which the impact of negative life events on suicide intent diminishes across episodes.