A study of the formation of amorphous calcium phosphate and hydroxyapatite on melt quenched Bioglass(A (R)) using surface sensitive shallow angle X-ray diffraction

Melt quenched silicate glasses containing calcium, phosphorous and alkali metals have the ability to promote bone regeneration and to fuse to living bone. These glasses, including 45S5 Bioglass(A (R)) [(CaO)(26.9)(Na2O)(24.4)(SiO2)(46.1)(P2O5)(2.6)], are routinely used as clinical implants. Consequently there have been numerous studies on the structure of these glasses using conventional diffraction techniques. These studies have provided important information on the atomic structure of Bioglass(A (R)) but are of course intrinsically limited in the sense that they probe the bulk material and cannot be as sensitive to thin layers of near-surface dissolution/growth. The present study therefore uses surface sensitive shallow angle X-ray diffraction to study the formation of amorphous calcium phosphate and hydroxyapatite on Bioglass(A (R)) samples, pre-reacted in simulated body fluid (SBF). Unreacted Bioglass(A (R)) is dominated by a broad amorphous feature around 2.2 A...(-1) which is characteristic of sodium calcium silicate glass. After reacting Bioglass(A (R)) in SBF a second broad amorphous feature evolves similar to 1.6 A...(-1) which is attributed to amorphous calcium phosphate. This feature is evident for samples after only 4 h reacting in SBF and by 8 h the amorphous feature becomes comparable in magnitude to the background signal of the bulk Bioglass(A (R)). Bragg peaks characteristic of hydroxyapatite form after 1-3 days of reacting in SBF.

Structural characterization of titanium-doped Bioglass using isotopic substitution neutron diffraction

Melt quenched silicate glasses containing calcium, phosphorus and alkali metals have the ability to promote bone regeneration and to fuse to living bone. Of these glasses 45S5 Bioglass® is the most widely used being sold in over 35 countries as a bone graft product for medical and dental applications; particulate 45S5 is also incorporated into toothpastes to help remineralize the surface of teeth. Recently it has been suggested that adding titanium dioxide can increase the bioactivity of these materials. This work investigates the structural consequences of incorporating 4 mol% TiO2 into Bioglass® using isotopic substitution (of the Ti) applied to neutron diffraction and X-ray Absorption Near Edge Structure (XANES). We present the first isotopic substitution data applied to melt quench derived Bioglass or its derivatives. Results show that titanium is on average surrounded by 5.2(1) nearest neighbor oxygen atoms. This implies an upper limit of 40% four-fold coordinated titanium and shows that the network connectivity is reduced from 2.11 to 1.97 for small quantities of titanium. Titanium XANES micro-fluorescence confirms the titanium environment is homogenous on the micron length scale within these glasses. Solid state magic angle spinning (MAS) NMR confirms the network connectivity model proposed. Furthermore, the results show the intermediate range order containing Na-O, Ca-O, O-P-O and O-Si-O correlations are unaffected by the addition of small quantities of TiO2 into these systems.

Development of areolae and growth of the peripheral prothallus in the crustose lichen Rhizocarpon geographicum:an image analysis study

Areolae of the crustose lichen Rhizocarpon geographicum (L.) DC., are present on the peripheral prothallus (marginal areolae) and also aggregate to form confluent masses in the centre of the thallus (central areolae). To determine the relationships between these areolae and whether growth of the peripheral prothallus is dependent on the marginal areolae, the density, morphology, and size frequency distributions of marginal areolae were measured in 23 thalli of R. geographicum in north Wales, UK using image analysis (Image J). Size and morphology of central areolae were also studied across the thallus. Marginal areolae were small, punctate, and occurred in clusters scattered over the peripheral prothallus while central areolae were larger and had a lobed structure. The size-class frequency distributions of the marginal and central areolae were fitted by power-law and log-normal models respectively. In 16 out of 23 thalli, central areolae close to the outer edge were larger and had a more complex lobed morphology than those towards the thallus centre. Neither mean width nor radial growth rate (RaGR) of the peripheral prothallus were correlated with density, diameter, or area fraction of marginal areolae. The data suggest central areolae may develop from marginal areolae as follows: (1) marginal areolae develop in clusters at the periphery and fuse to form central areolae, (2) central areolae grow exponentially, and (3) crowding of central areolae results in constriction and fragmentation. In addition, growth of the peripheral prothallus may be unrelated to the marginal areolae. © 2013 Springer Science+Business Media Dordrecht.

Merging and ranking answers in the semantic web:the wisdom of crowds

In this paper we propose algorithms for combining and ranking answers from distributed heterogeneous data sources in the context of a multi-ontology Question Answering task. Our proposal includes a merging algorithm that aggregates, combines and filters ontology-based search results and three different ranking algorithms that sort the final answers according to different criteria such as popularity, confidence and semantic interpretation of results. An experimental evaluation on a large scale corpus indicates improvements in the quality of the search results with respect to a scenario where the merging and ranking algorithms were not applied. These collective methods for merging and ranking allow to answer questions that are distributed across ontologies, while at the same time, they can filter irrelevant answers, fuse similar answers together, and elicit the most accurate answer(s) to a question.

Early spatial vision:a view through two eyes

Simple features such as edges are the building blocks of spatial vision, and so I ask: how arevisual features and their properties (location, blur and contrast) derived from the responses ofspatial filters in early vision; how are these elementary visual signals combined across the twoeyes; and when are they not combined? Our psychophysical evidence from blur-matchingexperiments strongly supports a model in which edges are found at the spatial peaks ofresponse of odd-symmetric receptive fields (gradient operators), and their blur B is givenby the spatial scale of the most active operator. This model can explain some surprisingaspects of blur perception: edges look sharper when they are low contrast, and when theirlength is made shorter. Our experiments on binocular fusion of blurred edges show that singlevision is maintained for disparities up to about 2.5*B, followed by diplopia or suppression ofone edge at larger disparities. Edges of opposite polarity never fuse. Fusion may be served bybinocular combination of monocular gradient operators, but that combination - involvingbinocular summation and interocular suppression - is not completely understood.In particular, linear summation (supported by psychophysical and physiological evidence)predicts that fused edges should look more blurred with increasing disparity (up to 2.5*B),but results surprisingly show that edge blur appears constant across all disparities, whetherfused or diplopic. Finally, when edges of very different blur are shown to the left and righteyes fusion may not occur, but perceived blur is not simply given by the sharper edge, nor bythe higher contrast. Instead, it is the ratio of contrast to blur that matters: the edge with theAbstracts 1237steeper gradient dominates perception. The early stages of binocular spatial vision speak thelanguage of luminance gradients.

Hyphenated cultures: Ethnicity and nation in Trinidad

This dissertation attempts to unravel why and how postcolonial Trinidad has displayed relative stability in spite of the presence of the factors that have produced conflict and instability in other postcolonial societies.^ Trinidad's distinctive social formation began in the colonial period with a unique politics of culture among the landowning European groups, Anglican English and French Creole. Contrary to the materialist assumption of landowners' class solidarity, the development of Trinidad's plantation economy into two crops, each controlled by a separate European ethno-religious faction, impeded the integration and subsequent ideological domination of European-Christians. Throughout the nineteenth century neither group dominated the other, nor did they fuse into a single ruling class. The dynamics between them both generated recurring conflict while simultaneously creating mechanisms that limited conflict. ^ Based on original in-depth fieldwork and historical analysis, the dissertation proceeds to demonstrate that Trinidad's unique intra-class conflict within the dominant European population has produced hyphenated, as opposed to hybridized cultural elements. Supplementing the historical analysis with empirical examinations of contemporary inter-religious rituals and post-colonial politics this dissertation argues that social integration is inseparable from the question of inter-cultural mixture or articulation. In Trinidad, however, the resulting combination of distinct cultural elements is neither a "plural society" (M.G. Smith 1965; Despres 1967) nor an integrated totality in the structural-functionalistic sense (R.T. Smith 1962; Braithwaite 1967). Moreover, Trinidad does not conform to the post-structural framework's depiction of the social linkage between power and culture. The concept of cultural hybridization is equally misleading in the case of Trinidad. The underlying assumption of a monolithic European population's cultural hegemony and post-structural analysis's almost exclusive focus on the inter -class politics of culture seriously misrepresent and misunderstand Trinidadian cultural and its associated social and political relations. The dissertation examines this reflexive influence of culture not as an instrument of the powerful few but as an autonomous force that reproduces social divisions, yet restrains conflict.^

Desejo, estilo de vida e transgressão da identidade em Dancer from the dance de Andrew Holleran e Pela noite de Caio F.

From the research and awareness of literary work, this thesis discusses aspects related to the study of homoeroticism and lifestyles in the works Dancer from the Dance (2001) by Andrew Holleran and Pela noite (2010) by Brazilian author Caio Fernando Abreu. Whereas issues about beauty, desire and lifestyle shape cutouts important to the narrative, I propose a discussion by examining the works that mark from the first moments of sexual release party in New York with the peculiarities of their own styles that characterized the Andrew Holleran characters rostificadas by an ethos that he composed during this time opening for freedom of sexual deviant sexualities. In Pela noite, we reiterate a continuation of opening moment in Brazil for gay characters Caio , assuming the early 1980s for those characters is the first " shadows " of AIDS and knowledge of self , in which his characters living with fear, anonymity and reminiscences of homophobia as a backdrop to the discussions that are triggered off by the author . To compose a theoretical framework to subsidize this work , we selected the works of Michel Foucault (2007 , 2010a , 2010b ) , Eve Kosofsky Sedgwick (2008 ) , Didier Eribon (2008 ) , David Cartier (2004 ) , David Eisenbach (2006 ) and other contributions that were undoubtedly essential to this endeavor

Motivational, volitional and multiple goal predictors of walking in people with type 2 diabetes

Acknowledgment MN's PhD scholarship was provided by Ministry of Health and Medical Education (Islamic Republic of Iran). This study was funded by the University of Aberdeen. FFS is funded by Fuse, the UK Clinical Research Collaboration Centre of Excellence for Translational Research in Public Health. The researchers gratefully acknowledge all the Type 2 diabetic patients and their household members who participated in the study for their contribution to this study; without them there would be no data. The researchers gratefully acknowledge the SDRN for providing the list of Type 2 diabetes and helping for sampling.

Motivational, volitional and multiple goal predictors of walking in people with type 2 diabetes

Acknowledgment MN's PhD scholarship was provided by Ministry of Health and Medical Education (Islamic Republic of Iran). This study was funded by the University of Aberdeen. FFS is funded by Fuse, the UK Clinical Research Collaboration Centre of Excellence for Translational Research in Public Health. The researchers gratefully acknowledge all the Type 2 diabetic patients and their household members who participated in the study for their contribution to this study; without them there would be no data. The researchers gratefully acknowledge the SDRN for providing the list of Type 2 diabetes and helping for sampling.

Testing of Interposer-Based 2.5D Integrated Circuits

The unprecedented and relentless growth in the electronics industry is feeding the demand for integrated circuits (ICs) with increasing functionality and performance at minimum cost and power consumption. As predicted by Moore's law, ICs are being aggressively scaled to meet this demand. While the continuous scaling of process technology is reducing gate delays, the performance of ICs is being increasingly dominated by interconnect delays. In an effort to improve submicrometer interconnect performance, to increase packing density, and to reduce chip area and power consumption, the semiconductor industry is focusing on three-dimensional (3D) integration. However, volume production and commercial exploitation of 3D integration are not feasible yet due to significant technical hurdles.

At the present time, interposer-based 2.5D integration is emerging as a precursor to stacked 3D integration. All the dies and the interposer in a 2.5D IC must be adequately tested for product qualification. However, since the structure of 2.5D ICs is different from the traditional 2D ICs, new challenges have emerged: (1) pre-bond interposer testing, (2) lack of test access, (3) limited ability for at-speed testing, (4) high density I/O ports and interconnects, (5) reduced number of test pins, and (6) high power consumption. This research targets the above challenges and effective solutions have been developed to test both dies and the interposer.

The dissertation first introduces the basic concepts of 3D ICs and 2.5D ICs. Prior work on testing of 2.5D ICs is studied. An efficient method is presented to locate defects in a passive interposer before stacking. The proposed test architecture uses e-fuses that can be programmed to connect or disconnect functional paths inside the interposer. The concept of a die footprint is utilized for interconnect testing, and the overall assembly and test flow is described. Moreover, the concept of weighted critical area is defined and utilized to reduce test time. In order to fully determine the location of each e-fuse and the order of functional interconnects in a test path, we also present a test-path design algorithm. The proposed algorithm can generate all test paths for interconnect testing.

In order to test for opens, shorts, and interconnect delay defects in the interposer, a test architecture is proposed that is fully compatible with the IEEE 1149.1 standard and relies on an enhancement of the standard test access port (TAP) controller. To reduce test cost, a test-path design and scheduling technique is also presented that minimizes a composite cost function based on test time and the design-for-test (DfT) overhead in terms of additional through silicon vias (TSVs) and micro-bumps needed for test access. The locations of the dies on the interposer are taken into consideration in order to determine the order of dies in a test path.

To address the scenario of high density of I/O ports and interconnects, an efficient built-in self-test (BIST) technique is presented that targets the dies and the interposer interconnects. The proposed BIST architecture can be enabled by the standard TAP controller in the IEEE 1149.1 standard. The area overhead introduced by this BIST architecture is negligible; it includes two simple BIST controllers, a linear-feedback-shift-register (LFSR), a multiple-input-signature-register (MISR), and some extensions to the boundary-scan cells in the dies on the interposer. With these extensions, all boundary-scan cells can be used for self-configuration and self-diagnosis during interconnect testing. To reduce the overall test cost, a test scheduling and optimization technique under power constraints is described.

In order to accomplish testing with a small number test pins, the dissertation presents two efficient ExTest scheduling strategies that implements interconnect testing between tiles inside an system on chip (SoC) die on the interposer while satisfying the practical constraint that the number of required test pins cannot exceed the number of available pins at the chip level. The tiles in the SoC are divided into groups based on the manner in which they are interconnected. In order to minimize the test time, two optimization solutions are introduced. The first solution minimizes the number of input test pins, and the second solution minimizes the number output test pins. In addition, two subgroup configuration methods are further proposed to generate subgroups inside each test group.

Finally, the dissertation presents a programmable method for shift-clock stagger assignment to reduce power supply noise during SoC die testing in 2.5D ICs. An SoC die in the 2.5D IC is typically composed of several blocks and two neighboring blocks that share the same power rails should not be toggled at the same time during shift. Therefore, the proposed programmable method does not assign the same stagger value to neighboring blocks. The positions of all blocks are first analyzed and the shared boundary length between blocks is then calculated. Based on the position relationships between the blocks, a mathematical model is presented to derive optimal result for small-to-medium sized problems. For larger designs, a heuristic algorithm is proposed and evaluated.

In summary, the dissertation targets important design and optimization problems related to testing of interposer-based 2.5D ICs. The proposed research has led to theoretical insights, experiment results, and a set of test and design-for-test methods to make testing effective and feasible from a cost perspective.

Rhetoric, Roman Values, and the Fall of the Republic in Cicero's Reception of Plato

This dissertation seeks to identify what makes Cicero’s approach to politics unique. The author's methodology is to turn to Cicero’s unique interpretation of Plato as the crux of what made his thinking neither Stoic nor Aristotelian nor even Platonic (at least, in the usual sense of the word) but Ciceronian. As the author demonstrates in his reading of Cicero’s correspondences and dialogues during the downward spiral of a decade that ended in the fall of the Republic (that is, from Cicero’s return from exile in 57 BC to Caesar’s crossing of the Rubicon in 49 BC), it is through Cicero's reading of Plato that the former develops his characteristically Ciceronian approach to politics—that is, his appreciation for the tension between the political ideal on the one hand and the reality of human nature on the other as well as the need for rhetoric to fuse a practicable compromise between the two. This triangulation of political ideal, human nature, and rhetoric is developed by Cicero through his dialogues "de Oratore," "de Re publica," and "de Legibus."

Caratterizzazione microstrutturale e frattografica di componenti in acciaio 316L prodotti tramite Selective Laser Melting

Il Selective Laser Melting è un processo di additive manufacturing che consiste nella realizzazione di componenti metallici tridimensionali, sovrapponendo strati di polvere, che viene via via fusa mediante una sorgente controllata di energia (laser). È una tecnica produttiva che viene utilizzata da più di 20 anni ma solo ora sta assumendo un ruolo rilevante nell’industria. È un processo versatile ma complesso che ad oggi permette di processare solo un numero limitato di leghe. Il presente lavoro di tesi riguarda in particolare lo studio, dal punto di vista microstrutturale, di componenti in acciaio inossidabile austenitico AISI-316L processato mediante Selective Laser Melting, attività svolta in collaborazione con il Gruppo di Tecnologia – Laser del Dipartimento di Ingegneria Industriale. Alla base dell’attività sperimentale è stata svolta anche un’ampia ricerca bibliografica per chiarire lo stato dell’arte sul processo e sulla lega in questione, la microstruttura, i difetti, le proprietà meccaniche e l’effetto dei parametri di processo sul componente finito. Le attività sperimentali hanno previsto una prima fase di caratterizzazione delle polveri di 316L, successivamente la caratterizzazione dei campioni prodotti tramite selective laser melting, in termini di microstruttura e difetti correlati al processo. Le analisi hanno rivelato la presenza di una microstruttura “gerarchica” costituita da melt pool, grani e celle submicrometriche. I difetti rinvenuti sono pori, delaminazione degli strati, particelle di polvere non fuse. Infine è stata eseguita la caratterizzazione frattografica dei campioni sottoposti a prove di trazione e di fatica a flessione rotante (attività condotte dal gruppo Laser) per identificare la morfologia di frattura e i siti di innesco della cricca di fatica.

Leveraging Multiple Features for Image Retrieval and Matching

The goal of image retrieval and matching is to find and locate object instances in images from a large-scale image database. While visual features are abundant, how to combine them to improve performance by individual features remains a challenging task. In this work, we focus on leveraging multiple features for accurate and efficient image retrieval and matching. We first propose two graph-based approaches to rerank initially retrieved images for generic image retrieval. In the graph, vertices are images while edges are similarities between image pairs. Our first approach employs a mixture Markov model based on a random walk model on multiple graphs to fuse graphs. We introduce a probabilistic model to compute the importance of each feature for graph fusion under a naive Bayesian formulation, which requires statistics of similarities from a manually labeled dataset containing irrelevant images. To reduce human labeling, we further propose a fully unsupervised reranking algorithm based on a submodular objective function that can be efficiently optimized by greedy algorithm. By maximizing an information gain term over the graph, our submodular function favors a subset of database images that are similar to query images and resemble each other. The function also exploits the rank relationships of images from multiple ranked lists obtained by different features. We then study a more well-defined application, person re-identification, where the database contains labeled images of human bodies captured by multiple cameras. Re-identifications from multiple cameras are regarded as related tasks to exploit shared information. We apply a novel multi-task learning algorithm using both low level features and attributes. A low rank attribute embedding is joint learned within the multi-task learning formulation to embed original binary attributes to a continuous attribute space, where incorrect and incomplete attributes are rectified and recovered. To locate objects in images, we design an object detector based on object proposals and deep convolutional neural networks (CNN) in view of the emergence of deep networks. We improve a Fast RCNN framework and investigate two new strategies to detect objects accurately and efficiently: scale-dependent pooling (SDP) and cascaded rejection classifiers (CRC). The SDP improves detection accuracy by exploiting appropriate convolutional features depending on the scale of input object proposals. The CRC effectively utilizes convolutional features and greatly eliminates negative proposals in a cascaded manner, while maintaining a high recall for true objects. The two strategies together improve the detection accuracy and reduce the computational cost.

Evaluation and FMEA of Fabrication Techniques for Metallic Grating Couplers on Polymer Substrates with Low Glass Transition Temperatures

The main task is to analyze the state of the art of grating couplers production and low-cost polymer substrates. Then to provide a recommendation of a new or adapted process for the production of metallic gratings on polymer sheets, based on a Failure Mode and Effect Analysis (FMEA). In order to achieve that, this thesis is divided into four chapters. After the first introductory chapter, the second section provides details about the state-of-the-art in optical technology platforms with focus on polymers and their main features for the aimed application, such as flexibility, low cost and roll to roll compatibility. It defines then the diffraction gratings and their specifications and closes with the explanation of adhesion mechanisms of inorganic materials on polymer substrates. The third chapter discusses processing of grating couplers. It introduces the basic fabrication methods and details a selection of current fabrication schemes found in literature with an assessment of their potential use for the desired application. The last chapter is a FMEA analysis of the retained fabrication process, called Flip and Fuse, in order to check its capability to realize the grating structure.

Dramaturgias en el teatro actual de las Antillas. Cartografía de poéticas en movimiento: Teresa Hernández y Josefina Báez

This dissertation aims to explore the contemporary Caribbean and its dramaturgy through the study of the artistic work of two remarkable artists: the Puerto Rican Teresa Hernández and the Dominicanyork Josefina Báez. Both artists are currently generating a lot of attention due to the internationalization of their creations, but still their work deserves even more consideration. These skilled stage artists connect various islands through their artistic work: Puerto Rico, the Dominican Republic, and the islands within New York City. The different cultures that converge and coexist in these places exemplify the process of hybridization that characterizes our modern world. Teresa and Josefina illustrate in their plays the plurality of the Caribbean, depicting a true multiplicity of languages and cultures that makes it impossible to adopt a fixed and unique conception of a national identity. They engage in the difficult task of finding out what it means to be a Puerto Rican, a Dominican or a New Yorker. Both performers clearly criticize the notion of an identity that pretends to fuse and include all the possible voices of every Caribbean nation under a sole definition. Therefore, one must consider the heterogeneity that surrounds us as the basis to approach the work of these two artists when evaluating the Caribbean, as well as the dramaturgical procedures these great performers employ. To begin with, how can we talk about the Caribbean? How can we talk accurately about dramaturgical procedures? Furthermore, how can we express with words the ephemeral aspect of the theatrical event? How can we use words to address a Caribbean reality, which contains European and American standards, but does not necessarily follow them? These are the questions that the present investigation seeks to answer; however, it is not an easy task. Thus, the real challenge of this dissertation is to offer a rigorous response to these questions...