Health vulnerabilities: the diagnosis of freshmen from a portuguese university

The start of university is presented as a crucial stage in the life of the student. If, on the one hand, it is a period of increased autonomy and freedom, on the other, it is a period that also increases the sense of responsibility and self discipline. In this study, based on a quantitative approach, we identified the main risk situations experienced by freshmen at the University of Evora, by applying a questionnaire developed for this purpose and the Beck inventory. Key findings are highlighted, such as the consumption of harmful substances (tobacco, alcohol and illicit drugs), whose values exceed the average population. The consumption of alcoholic beverages begins early and is continuous and excessive. Also, the presence of symptoms compatible with dysphoria and depression is noted in about 9% of students. Self-medication practices were found in 58.7% of the freshmen. Our findings reveal the need for preventive intervention by health professionals, due to these young people’s great exposure to health risks.

VULNERABILIDADES EM SAÚDE: O DIAGNÓSTICO DOS CALOIROS DE UMA UNIVERSIDADE PORTUGUESA

O ingresso na universidade apresenta-se como uma fase crucial na vida do estudante, fase em que há aumento da autonomia e liberdade, do sentido de responsabilidade e a da autodisciplina, mas propicia mais acesso aos riscos à saúde. Como o objetivo de identificar as situações de risco experenciadas pelos caloiros de Universidade de Évora, desenvolveu-se um estudo quantitativo cujos dados foram coletados mediante a aplicação de um questionário e do inventário de Beck. Destaca-se o consumo de substâncias nocivas (tabaco, álcool e drogas ilícitas), cujos valores superam a média da população portuguesa e a presença de sintomatologia compatível com disforia e depressão em cerca de 9% dos estudantes. Verificou-se a prática da auto-medicação em 58,7% dos ingressantes. Os achados deste estudo revelam a necessidade de uma intervenção preventiva por parte dos profissionais de saúde devido a alta exposição aos riscos de saúde destes jovens.

Electric field switching in a resonant tunneling diode electroabsorption modulator

The basic mechanism underlying electric field switching produced by a resonant tunneling diode (RTD) is analyzed and the theory compared with experimental results; agreement to within 12% is achieved. The electroabsorption modulator (EAM) device potential of this effect is explored in an optical waveguide configuration. It is shown that a RTD-EAM can provide significant absorption coefficient change, via the Franz– Keldysh effect, at appropriate optical communication wavelengths around 1550 nm and can achieve up to 28-dB optical modulation in a 200- m active length device. The advantage of the RTD-EAM over the conventional reverse-biased p–n junction EAM, is that the RTD-EAM has, in essence, an integrated electronic amplifier and, therefore, requires considerably less switching power.

Étude de l'influence des caractéristiques des granulats sur la performance des bétons fluides à rhéologie adaptée

Les caractéristiques physiques des granulats ont une forte influence sur la performance du béton, y compris l'ouvrabilité du béton, la zone de transition, le module d'élasticité, la résistance mécanique, etc. Comparativement aux bétons conventionnels vibrés, les bétons fluides à rhéologie adapté (BFRA) beaucoup plus complexes, doivent présenter une bonne stabilité (résistance à la ségrégation), une bonne rhéologie et les résistances mécaniques souhaitées. Le choix des granulats joue un rôle majeur pour l'obtention de ces différentes propriétés. Une meilleure compréhension de l'influence des caractéristiques physiques sur la performance des BFRA est nécessaire pour leur optimisation afin d'obtenir un bon rapport performance-coût. L'objectif principal de cette étude est de comprendre l'influence des propriétés physiques des granulats (forme, densité, granulométrie, module de finesse, et la quantité de particules plates ou allongées) sur la demande en superplastifiant, la rhéologie et les propriétés mécaniques des BFRA. Les types de bétons étudiés sont les bétons autoplaçants (BAP) destinés à la construction de bâtiments, les bétons semi-autoplaçants (BSAP) destinés pour la construction et la réparation des infrastructures et les BAP destinés à la préfabrication. Quatre rapports sable/granulat total (S/G), deux sables composés (manufacturé et naturel) au laboratoire de différentes finesses (MF = 2,5 et MF = 3) et un sable naturel provenant d'usines ont été utilisés. L'influence de la compacité granulaire, du type de sable (naturel vs manufacturé) et de la teneur en fines du squelette granulaire sur les propriétés rhéologiques et mécaniques des BFRA est étudiée. Douze mélanges de BSAP ont été formulés à cet effet. L'influence du type de granulométrie (continue ou discontinue), du diamètre nominal maximal des gros granulats (10, 14 et 20 mm) et de la forme des gros granulats (roulé, aplati et allongé) sur les propriétés rhéologiques et mécaniques des BFRA ont été étudiées. Quatre types de gros granulats provenant de l'industrie et sept gros granulats reconstitués en laboratoire ont été utilisés pour prendre en compte tous ces paramètres. Les résultats montrent que la compacité granulaire est une donnée importante à prendre en compte pour la formulation d'un BFRA (BAP ou BSAP). Cette étude a également montré que les particules fines de diamètres inférieurs à 315 [micro]m sont celles qui influencent les paramètres rhéologiques des BSAP. Pour un rapport E/L constant et un diamètre d'étalement fixe, l'augmentation de la teneur de particules passant le tamis 315 [micro]m augmente la viscosité plastique, diminue le seuil de cisaillement et augmente la stabilité statique des bétons. Cette étude préconise l'utilisation des granulats concassés de granulométrie continue contenant des particules équidimensionnelles pour améliorer les propriétés rhéologiques des bétons. Enfin, grâce à cette étude, la production des BAP dans les industries connaîtra une avancée majeure par un choix stratégique des granulats. Les industries pourront notamment faire une utilisation optimale des superplastifiants, adapter la rhéologie des BAP (viscosité plastique et seuil de cisaillement) au type de BAP tout en conservant leurs caractéristiques mécaniques. Cette étude bien que scientifique, répond en d'autres termes aux besoins de l'industrie car elle propose un bon rapport performance-coût des BAP.

A new bulk-driven input stage design for sub 1-volt CMOS op-amps

This paper presents a new design approach for a rail-to-rail bulk-driven input stage using a standard single-well (n-well in this paper) CMOS technology. This input stage can provide nearly constant transconductance and constant slew rate over the entire input common-mode voltage, operating with a wide supply voltage ranging from sub 1-volt (V/sub T0/+ 3V/sub DSsat/) to the maximum allowed for the CMOS process, as well as preventing latch-up.

Duo Geminiani and the Bach Ensemble, January 7, 1979

Concert program for Duo Geminiani and the Bach Ensemble, January 7, 1979

The Contemporary Group, February 12 and 13 , 1975

Concert program for The Contemporary Group, February 12 and 13, 1975

Intelligent SCADA for load control

A supervisory control and data acquisition (SCADA) system is an integrated platform that incorporates several components and it has been applied in the field of power systems and several engineering applications to monitor, operate and control a lot of processes. In the future electrical networks, SCADA systems are essential for an intelligent management of resources like distributed generation and demand response, implemented in the smart grid context. This paper presents a SCADA system for a typical residential house. The application is implemented on MOVICON™11 software. The main objective is to manage the residential consumption, reducing or curtailing loads to keep the power consumption in or below a specified setpoint, imposed by the costumer and the generation availability.

The effect of metal transfer modes and shielding gas composition on the emission of ultraafine particles in MAG steel welding

The present study aims to characterize ultrafine particles emitted during gas metal arc welding of mild steel and stainless steel, using different shielding gas mixtures, and to evaluate the effect of metal transfer modes, controlled by both processing parameters and shielding gas composition, on the quantity and morphology of the ultrafine particles. It was found that the amount of emitted ultrafine particles (measured by particle number and alveolar deposited surface area) are clearly dependent from the main welding parameters, namely the current intensity and the heat input of the Welding process. The emission of airborne ultrafine particles increases with the current intensity as fume formation rate does. When comparing the shielding gas mixtures, higher emissions were observed for more oxidizing mixtures, that is, with higher CO2 content, which means that these mixtures originate higher concentrations of ultrafine particles (as measured by number of particles. by cubic centimeter of air) and higher values of alveolar deposited surface area of particles, thus resulting in a more hazardous condition regarding welders exposure.

Backside-surface imprinting as a new strategy to generate specific plastic antibody materials

A backside protein-surface imprinting process is presented herein as a novel way to generate specific synthetic antibody materials. The template is covalently bonded to a carboxylated-PVC supporting film previously cast on gold, let to interact with charged monomers and surrounded next by another thick polymer. This polymer is then covalently attached to a transducing element and the backside of this structure (supporting film plus template) is removed as a regular “tape”. The new sensing layer is exposed after the full template removal, showing a high density of re-binding positions, as evidenced by SEM. To ensure that the templates have been efficiently removed, this re-binding layer was cleaned further with a proteolytic enzyme and solution washout. The final material was named MAPS, as in the back-side reading of SPAM, because it acts as a back-side imprinting of this recent approach. It was able to generate, for the first time, a specific response to a complex biomolecule from a synthetic material. Non-imprinted materials (NIMs) were also produced as blank and were used as a control of the imprinting process. All chemical modifications were followed by electrochemical techniques. This was done on a supporting film and transducing element of both MAPS and NIM. Only the MAPS-based device responded to oxLDL and the sensing layer was insensitive to other serum proteins, such as myoglobin and haemoglobin. Linear behaviour between log(C, μg mL−1) versus charged tranfer resistance (RCT, Ω) was observed by electrochemical impedance spectroscopy (EIS). Calibrations made in Fetal Calf Serum (FCS) were linear from 2.5 to 12.5 μg mL−1 (RCT = 946.12 × log C + 1590.7) with an R-squared of 0.9966. Overall, these were promising results towards the design of materials acting close to the natural antibodies and applied to practical use of clinical interest.

Porokeratosis Ptychotropica of the Scrotum: Dermoscopic Evaluation of an Atypical Presentation

Porokeratosis ptychotropica is a rare variant of porokeratosis that is classically located on the gluteal and perianal regions, seldom extending to the genitalia. The authors report an atypical presentation of porokeratosis ptychotropica and discuss the use of dermoscopy in evaluating this dermatosis. Dermoscopic findings, although not specific to this variant of porokeratosis, are helpful in the differential diagnosis of other genital disorders. Histopathology, through the visualization of multiple cornoid lamellae, prevails as the gold standard for the definite diagnosis of porokeratosis ptychotropica.

Long-Term Recurrence of Nonmelanoma Skin Cancer after Topical Methylaminolevulinate Photodynamic Therapy in a Dermato-Oncology Department

BACKGROUND: Most available studies on the efficacy of topical photodynamic therapy focus on short-to medium-term results. Long-term data are scarce. OBJECTIVE: To evaluate the long-term efficacy of photodynamic therapy with topical methylaminolevulinate to treat Bowen's disease and basal cell carcinoma in the clinical practice setting of a dermato-oncology department. METHODS: The study included patients diagnosed with Bowen's disease or basal cell carcinoma, and who received photodynamic therapy from 2004 to 2008. Treatment protocol and clinical follow-up were standardized. The primary endpoint was clinically observed recurrence in a previous photodynamic therapy-treated area. Descriptive and survival analyses were performed. RESULTS: A total of 31 Bowen's disease lesions and 44 superficial basal cell carcinoma were treated, with a median follow-up of 43.5 months. Recurrence was observed in 14 Bowen's disease lesions (53.8%) and in 11 superficial basal cell carcinoma (33.3%). Significantly higher estimates for recurrence rates were found in patients with Bowen's disease (p=0.0036) or those aged under 58 years (p=0.039). The risk of recurrence was higher in patients with Bowen's disease than in those with superficial basal cell carcinoma and younger patients. CONCLUSIONS: Recurrence should be considered when choosing to treat non-melanoma skin cancer with photodynamic therapy. Younger age and Bowen's disease were independent predictors for long-term recurrence, suggesting the need to establish an extended period of follow-up for this subset of patients.

Tetrastichus giffardianus on pupae of Anastrepha in Brazil.

2016

A Casa de Atouguia, os Últimos Avis e o Império. Dinâmicas entrecruzadas na carreira de D. Luís de Ataíde (1516-1581)

Tese apresentada para cumprimento dos requisitos necessários à obtenção do grau de Doutor em História

Tragédia mais Gloriosa que Dolorosa

Em 1549 os missionários da Companhia de Jesus estabeleciam a missão do Japão, inaugurando um período de evangelização católica que se prolongou até à década de 1640. O sucesso da conversão dos nipónicos levou a que, a partir da década de 1590, as ordens mendicantes fossem no encalço dos jesuítas. O período coincidiu com o momento em que o regime Tokugawa impôs no Japão um processo de centralização política de cariz autoritário. A doutrina católica e as atitudes dos missionários colidiram com a nova ordem estabelecida pelos Tokugawa que, por isso, promoveram uma política sistemática anticristã. O sucesso da evangelização deu lugar a uma missão martirizada que serviu para alimentar uma vasta produção tipográfica na Europa Católica de Seiscentos, tanto mais que ia ao encontro das tendências devocionais da Europa da Contra-Reforma e da espiritualidade do Barroco. Por esta via, a Europa tomou contacto com a longínqua Ásia. Mas os textos missionários impressos não tinham apenas fins informativos. A dinâmica tipográfica gerada servia também para fazer a apologia de cada uma das ordens missionárias e assim influenciar os poderes políticos e religiosos a fim defenderem os seus direitos de evangelização. O martírio no Japão foi assim utilizado como arma de propaganda pelas ordens missionárias na Europa.