Monitoring of the dissemination of Salmonella in the chicken Frankfurt-sausage production line of a sausage factory in the state of São Paulo, Brazil

Poultry meat and its derivatives are among the foodstuffs considered by environmental health authorities to present the highest risks to the public. A total of 185 samples were collected in five monthly batches, from different processing stages in a sausage plant that uses mechanically-deboned chicken meat (MDCM) and tested for the presence of Salmonella. Enrichment was carried out in both Kauffman tetrathionate broth and Rappaport-Vassiliadis broth and isolation on Salmonella-Shigella agar and brilliant-green agar. Live Salmonella bacteria were isolated from six samples of the raw meat and from the emulsion, in batches three, four and five, but not from any sample in batches one or two. The six isolated strains were all classified as Salmonella Albany, which has not previously been reported in MDCM. of the two enrichment broths, Rappaport-Vassiliadis gave the better results. The Pattern of contamination suggests a probable common source, given that a new supplier was used in the third, fourth, and fifth months. It was also shown that the industrial cooking was effective in preventing Salmonella surviving in the final product.

Analysis of the performance of an extraction-condensation steam turbine on a cogeneration system of a Brazilian sugar-alcohol factory

In this work a detailed thermodynamic analysis for an extraction-condensation steam turbine capable to drive a 40 MVA electricity generator in a sugar-alcohol factory was carried out. The use of this turbine in the cogeneration system showed that its efficiency contributed to increase the power generation, although the condensation reduces the overall efficiency of the plant. Sensibility analyses were performed to evaluate the behavior of the overall energy efficiency of a plant with the extraction-condensation turbine in function of the boiler efficiency, the specific consumption of steam in the processes and the condensation rate in the turbine. It was observed that the plant efficiency is very sensible to the condensation rate variation and it increases when there is an increase in the demand of steam for processes.

The Approach To The Administrative Mapping In Knowledge Management For Portugal Libraries

In the study of theoretical trends in Administration, the management of information follows the development of theories of Administration; constant-adaptations are suffered. Information Science as Museums, Archives and Libraries, understands and concerns itself with the changes wrought in these endeavour of the knowledge society as new forms of communication and integration. They interact in ways such as to maximize access to information and facilitate improvement on their structural environment. The research aims at identifies the requirements and specifications of an information system for knowledge management in the public's library enviromnent and proposes to achieve a pre-defined structure for the implementation of administration management. The research is conducted with public's library of the metropolian region of the North's Portugal. In the improvement of systems theoretical administrative trends become management decisions and result in the ultimate success of the organization.

Microsatellite loci isolation from river buffalo using enriched partial genomic libraries

The extensive use of buffalo in agriculture, especially in developing countries, begs for genetic resources to evaluate and improve traits important to local and regional economies. Brazil presents the largest water buffalo populations in the New World, with 1 1 million heads including swamp and river types. To design rational breeding strategies for optimum utilization and conservation of available genetic variability in the Brazilian buffalo's population, it is essential to understand their genetic architecture and relationship among various breeds. This depends, in part, on the knowledge of their genetic structure based on molecular markers like microsatellites. In the present study, we developed six enriched partial genomic libraries for river buffalo using selective hybridization methods. Genomic DNA was hybridized with six different arrays of repeat motif, 5' biotinylated - (CA)(15), (CT)(15), (AGG)(8), (GAAA)(8), (GATA)(8), (AAAAC)(8) - and bound to streptavidin coated beads. The cloning process generated a total of 1920 recombinant clones. Up to date, 487 were directly sequenced for the presence of repeats, from which 13 have been positive for presence of repeats as follows: 9 for di-nucleotide repeats, 3 for tri-nucleotide repeats and 1 for tetra-nucleotide repeat. PCR primer pairs for the isolated microsatellites are under construction to determine optimum annealing temperature. These microsatellites will be useful for studies involving phylogenetic relationships, genome mapping and genetic diversity analysis within buffalo populations worldwide.

Searching for molecular markers in head and neck squamous cell carcinomas (HNSCC) by statistical and bioinformatic analysis of larynx-derived SAGE libraries

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mutagenic activity of sweepings and pigments from a household-wax factory assayed with Salmonella typhimurium

The mutagenic activity of garbage originating from a household wax industry was determined by the Salmonella/microsome assay, using the bacterial strains TA100, TA98 and YG1024. The garbage was obtained by sweeping the floor of the factory at the end of the work shift. Organic compounds were extracted by ultrasound for 30 min in dichloromethane or 70% ethanol. After evaporation of solvent, these extracts (HFS: household-wax factory sweepings) were dissolved in DMSO, and were tested for the mutagenic activity at varying concentrations (HFS-ET: 0.08-0.68 mg/plate, HFS-DCM: 0.60-7.31 mg/plate). The colouring agents (pigments) used in the production of the wax were also dissolved in DMSO and tested with the assay. The concentrations tested for each pigment were: Amaranth: 0.46-3.65 mg/plate, Auramine: 0.15-1.2 mg/plate, Tartrazine: 0.46-3.65 mg/plate and Rhodamine B: 0.22-1.82 mg/plate. Both ET and DCM organic extracts had mutagenic activity, especially in the YG1024 strain. The pigments behaved in a similar way, demonstrating that YG1024 was the most sensitive strain for the detection of mutagenicity, and that metabolization increased the activity. Human exposure (occupational and non-occupational) to industrial residues generated during the household-wax manufacturing and packaging process should be monitored, since this type of garbage is normally deposited in the environment without any control. (C) 2004 Elsevier Ltd. All rights reserved.

TRICUT: a program to clip triangle meshes using the rapid and triangle libraries and the visualization toolkit

An efficient technique to cut polygonal meshes as a step in the geometric modeling of topographic and geological data has been developed. In boundary represented models of outcropping strata and faulted horizons polygonal meshes often intersect each other. TRICUT determines the line of intersection and re-triangulates the area of contact. Along this line the mesh is split in two or more parts which can be selected for removal. The user interaction takes place in the 3D-model space. The intersection, selection and removal are under graphic control. The visualization of outcropping geological structures in digital terrain models is improved by determining intersections against a slightly shifted terrain model. Thus, the outcrop line becomes a surface which overlaps the terrain in its initial position. The area of this overlapping surface changes with respect to the strike and dip of the structure, the morphology and the offset. Some applications of TRICUT on different real datasets are shown. TRICUT is implemented in C+ + using the Visualization Toolkit in conjunction with the RAPID and TRIANGLE libraries. The program runs under LINUX and UNIX using the MESA OpenGL library. This work gives an example of solving a complex 3D geometric problem by integrating available robust public domain software. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Identification of bacteria in endodontic infections by sequence analysis of 16S rDNA clone libraries

A significant proportion of oral bacteria are unable to undergo cultivation by existing techniques. In this regard, the microbiota from root canals still requires complementary characterization. The present study aimed at the identification of bacteria by sequence analysis of 16S rDNA clone libraries from seven endodontically infected teeth. Samples were collected from the root canals, subjected to the PCR with universal 16S rDNA primers, cloned and partially sequenced. Clones were clustered into groups of closely related sequences (phylotypes) and identification to the species level was performed by comparative analysis with the GenBank, EMBL and DDBJ databases, according to a 98 % minimum identity. All samples were positive for bacteria and the number of phylotypes detected per subject varied from two to 14. The majority of taxa (65(.)2 %) belonged to the phylum Firmicutes of the Gram-positive bacteria, followed by Proteobacteria (10(.)9 %), Spirochaetes (4(.)3 %), Bacteroidetes (6(.)5 %), Actinobacteria (2(.)2 %) and Deferribacteres (2(.)2 %). A total of 46 distinct taxonomic units was identified. Four clones with low similarity to sequences previously deposited in the databases were sequenced to nearly full extent and were classified taxonomically as novel representatives of the order Clostridiales, including a putative novel species of Mogibacterium. The identification of novel phylotypes associated with endodontic infections suggests that the endodontium may still harbour a relevant proportion of uncharacterized taxa.

Thermodynamic analysis of the cogeneration system expansion in a sugar-alcohol factory

In this work it was performed energetic and exergetic analyses of three thermal plants to assessment a cogeneration system in expansion of a sugar-alcohol factory. The initial configuration considered is constituted by a low pressure steam generator, single stage steam turbines for electricity generation and crusher, shredder and mills with mechanical driving. In the intermediary configuration, the low pressure steam generator was substituted by another which generates steam at higher pressure and higher temperature, the steam turbines for electricity generation were substituted by a multiple stages extraction-condensation turbine and the other steam turbines were maintained. The final configuration consists in the substitution of these last turbines by electrical motors. Thermodynamic analyses were performed to evaluate the equipment and the overall plants efficiencies to permit a comparison among the plants. Besides of this, some important parameters of the sugar-alcohol factories were calculated.

Mutagenic activity in waste from an aluminum products factory in Salmonella/microsome assay

The mutagenic activity of waste material originating from an aluminum products factory was determined by the Salmonella/microsome assay, using the bacterial strains TA100, TA98 and YG1024. The material was obtained by sweeping the factory floor at the end of the work shift. Organic compounds were extracted by ultrasound for 30 min in dichloromethane or 70% ethanol. After evaporation of solvent, these extracts were dissolved in dimethylsulfoxide, and tested for the mutagenic activity at varying concentrations. All the extracts from the factory had mutagenic activity, especially in the YG1024 strain, suggesting the presence of aromatic amines, later confirmed by chemical analysis. The TA98 strain also showed mutagenic activity, though it did not exhibit the highest mutagenicity index observed with the YG1024 strain. In TA100, mutagenic activity was not observed. This study should serve as an alert to management and those who are occupationally exposed, and as a warning that this type of waste should not be discarded in the environment without any control. (C) 2004 Elsevier Ltd. All rights reserved.

Optimal clone identifier for genomic shotgun libraries: OC Identifier tool

In DNA microarray experiments, the gene fragments that are spotted on the slides are usually obtained by the synthesis of specific oligonucleotides that are able to amplify genes through PCR. Shotgun library sequences are an alternative to synthesis of primers for the study of each gene in the genome. The possibility of putting thousands of gene sequences into a single slide allows the use of shotgun clones in order to proceed with microarray analysis without a completely sequenced genome. We developed an OC Identifier tool (optimal clone identifier for genomic shotgun libraries) for the identification of unique genes in shotgun libraries based on a partially sequenced genome; this allows simultaneous use of clones in projects such as transcriptome and phylogeny studies, using comparative genomic hybridization and genome assembly. The OC Identifier tool allows comparative genome analysis, biological databases, query language in relational databases, and provides bioinformatics tools to identify clones that contain unique genes as alternatives to primer synthesis. The OC Identifier allows analysis of clones during the sequencing phase, making it possible to select genes of interest for construction of a DNA microarray. ©FUNPEC-RP.