Predicting toxic species concentrations in a full-scale vitiated fire

A toxicity model on dividing the computational domain into two parts, a control region (CR) and a transport region (TR), for species calculation was recently developed. The model can be incorporated with either the heat source approach or the eddy dissipation model (EDM). The work described in this paper is a further application of the toxicity model with modifications of the EDM for vitiated fires. In the modified EDM, chemical reaction only occurs within the CR. This is consistent with the approach used in the species concentration calculations within the toxicity model in which yields of combustion products only change within the CR. A vitiated large room-corridor fire, in which the carbon monoxide (CM) concentrations are very high and the temperatures are relatively low at locations distant from the original fire source, is simulated using the modified EDM coupled with the toxicity model. Compared with the EDM, the modified EDM provide significant improvements in the predictions of temperatures at remote locations. Predictions of species concentrations at various locations follow the measured trends. Good agreements between the measured and predicted species concentrations are obtained at the vitiated fire stage.

Characterisation of products of tricalcium silicate hydration in the presence of heavy metals

The hydration of tricalcium silicate (C(3)S) in the presence of heavy metal is very important to cement-based solidification/stabilisation (s/s) of waste. In this work, tricalcium silicate pastes and aqueous suspensions doped with nitrate salts of Zn(2+), Pb(2+), Cu(2+) and Cr(3+) were examined at different ages by X-ray powder diffraction (XRD), thermal analysis (DTA/TG) and (29)Si solid-state magic angle spinning/nuclear magnetic resonance (MAS/NMR). It was found that heavy metal doping accelerated C(3)S hydration, even though Zn(2+) doping exhibited a severe retardation effect at an early period of time of C(3)S hydration. Heavy metals retarded the precipitation of portlandite due to the reduction of pH resulted from the hydrolysis of heavy metal ions during C(3)S hydration. The contents of portlandite in the control, Cr(3+)-doped, Cu(2+)-doped, Pb(2+)-doped and Zn(2+)-doped C(3)S pastes aged 28 days were 16.7, 5.5, 5.5, 5.5, and <0.7%, respectively. Heavy metals co-precipitated with calcium as double hydroxides such as (Ca(2)Cr(OH)(7).3H(2)O, Ca(2)(OH)(4)4Cu(OH)(2).2H(2)O and CaZn(2)(OH)(6).2H(2)O). These compounds were identified as crystalline phases in heavy metal doping C(3)S suspensions and amorphous phases in heavy metal doping C(3)S pastes. (29)Si NMR data confirmed that heavy metals promoted the polymerisation of C-S-H gel in 1-year-old of C(3)S pastes. The average numbers of Si in C-S-H gel for the Zn(2+)-doped, Cu(2+)-doped, Cr(3+)-doped, control, and Pb(2+)-doped C(3)S pastes were 5.86, 5.11, 3.66, 3.62, and 3.52. And the corresponding Ca/Si ratios were 1.36, 1.41, 1.56, 1.57 and 1.56, respectively. This study also revealed that the presence of heavy metal facilitated the formation of calcium carbonate during C(3)S hydration process in the presence of carbon dioxide.

D4.2 – Full Design Document

This deliverable outlines the design blueprints for the RAGE application scenario games and forms the rest of the scope for WP4’s tasks. The game designs have been developed in collaboration with application scenario partners in WP5, and informed by WP1, 2 & 3. Additionally peer-feedback has been provided by game developers across WP4. The designs outline the integration of the RAGE assets developed in WP2 and WP3. Each section provides in detail the game play descriptions, game dynamics and mechanics, pedagogies and technical implementation of the RAGE assets into the game applications as described in detailed in WP5’s application documents. The full description of the application objectives and associated learning outcomes has been provided in the project’s MS2 Application Scenario Outlines document.

Tiflocolitis syndrome acute for "Klebsiella" sp. in a spanish pure breed horse. A case report

Were study a horse (Equus caballus), Purebred Spanish Horse, 6 years old, intact male sex, weight about 550kg, from equestrian center in Fregenal Sierra-Extremadura, Spain. History of acute diarrhea, are apply conventional treatment (hydration, anti-inflammatory and antibiotic). Physical examination showed severe profuse, fetid diarrhea deep red, tachypnea. The physiological parameters were: heart rate 60 bpm, respiratory rate 39 rpm and mucous cyanotic. Temperature: 40°C. Hematological examination showed severe leucopenia, decreased total serum protein, albumin and globulin also diminished. Serum chemistry evidenced severe hyponatremia and hypokalemia, with high levels of chlorine indicating metabolic acidosis. A stool analysis, which was negative and showed no eggs or larvae in the samples studied was performed. The microbial culture allowed the isolation of Klebsiella sp. and susceptibility testing showed sensitivity to ampicillin, Cetafzidine, Ciprofloxacin, Cefepine, gentamicin, imipenem, meropenem, Piperaciclina, piperacillin / tazobactam and trimethoprim sulfa resistance. The horse presented systemic complications associated with endotoxemia and death 36 hours after the onset of diarrhea. At necropsy, severe bleeding was observed enterotiflocolitis. The histological sections showed proliferative enteritis characterized by lymphocyte and mononuclear inflammatory infiltrate plasmocytorious mucosa and submucosa, coagulation necrosis, bacteria and short rod type morphology with no specific grouping. In conclusion a case of acute syndrome enterotiflocolitis reported Klebsiella sp. on a horse Purebred Spanish.

Load Testing of Floor Slabs in a Full-Scale Reinforced Concrete Building

A series of short and long term service load tests were undertaken on the sixth floor of the full-scale, seven storey, reinforced concrete building at the Large Building Test Facility of the Building Research Establishment at Cardington. By using internally strain gauged reinforcing bars cast into an internal and external floor bay during the construction process it was possible to gain a detailed record of slab strains resulting from the application of several arrangements of test loads. Short term tests were conducted in December 1998 and long term monitoring then ensued until April 2001. This paper describes the test programmes and presents results to indicate slab behaviour for the various loading regimes.

Full-Wave Analysis of Layered Aperture Arrays

The new rigorous numerical-analytical technique based upon Galerkin method with the entire domain basis functions has been developed and applied to the study of the periodic aperture arrays containing multiple dissimilar apertures of complex shapes in stratified medium. The rapid uniform convergence of the solutions has enabled a comprehensive parametric study of complex array arrangements. The developed theory has revealed new effects of the aperture shape and layout on the array performance. The physical mechanisms underlying the TM wave resonances and Luebbers' anomaly have been explained for the first time.

Electron-phonon interaction in atomic-scale conductors: Einstein oscillators versus full phonon modes

Two extreme pictures of electron-phonon interactions in nanoscale conductors are compared: one in which the vibrations are treated as independent Einstein atomic oscillators, and one in which electrons are allowed to couple to the full, extended phonon modes of the conductor. It is shown that, under a broad range of conditions, the full-mode picture and the Einstein picture produce essentially the same net power at any given atom in the nanojunction. The two pictures begin to differ significantly in the limit of low lattice temperature and low applied voltages, where electron-phonon scattering is controlled by the detailed phonon energy spectrum. As an illustration of the behaviour in this limit, we study the competition between trapped vibrational modes and extended modes in shaping the inelastic current-voltage characteristics of one-dimensional atomic wires.