Environmental Assessment: IA 12 in Mason City From S. Monroe Ave to S. Carolina Ave, Cerro Gordo County, Iowa, NHSX-122-1(14)--3H-17, 2013

DESCRIPTION OF PROPOSED ACTION This Environmental Assessment (EA) has been prepared in compliance with the requirements of the National Environmental Policy Act of 1969 (NEPA). This EA informs the public and interested agencies of the proposed action and alternatives to the proposed action in order to gather feedback on the improvements under consideration. Proposed Action The Iowa Department of Transportation (Iowa DOT) and the Federal Highway Administration (FHWA) are evaluating potential alternatives to improve IA 122 in the City of Mason City. IA 122/Business US 18 is a primary east-west travel route through the City that transitions from a 4- lane undivided roadway, to 2-lane one-way pairs, then back to a 4-lane undivided roadway (Figure 1-1). The Iowa DOT proposes to flatten the tight reverse curves on the east end of the project. The one-way pairs will be narrowed by eliminating on-street parking along the corridor to more clearly define travel lanes. This will serve to calm traffic flows and reduce crashes along the highway. Additionally, improvements to intersections as well as consolidating or removing access points to improve traffic operations are proposed within the project corridor. A new access road for the Mason City Fire Department on the west end of the project will allow emergency trucks better access to travel south and east. Study Area The primary area of investigation for the Project is generally bounded by IA 122 through Mason City, known locally as 5th and 6th Street Southwest from South Monroe Avenue to South Carolina Avenue. US 65, known locally as Federal Avenue, bisects the study area. At this intersection of US 65 and Iowa 122, the 5th and 6th Street SW changes to 5th and 6th St SE. For the purposes of this discussion, this area will be referred to collectively as the IA 122 corridor. The Study Area boundaries were established to allow the development of a wide range of alternatives that could address the purpose and need for the project. The Study Area is larger than the area proposed for construction activities for the Project. However, some impacts may extend beyond the Study Area; where this occurs, it will be noted and addressed in the Environmental Analysis Section (Section 5). Figure 1-1 outlines the Study Area of the proposed action.

The effect of muscle fatigue on stimulus intensity requirements for central and peripheral fatigue quantification.

PURPOSE: The present study was designed to determine the stimulation intensity necessary for an adequate assessment of central and peripheral components of neuromuscular fatigue of the knee extensors. METHODS: Three different stimulation intensities (100, 120 and 150 % of the lowest intensity evoking a plateau in M-waves and twitch amplitudes, optimal stimulation intensity, OSI) were used to assess voluntary activation level (VAL) as well as M-wave, twitch and doublet amplitudes before, during and after an incremental isometric exercise performed by 14 (8 men) healthy and physically active volunteers. A visual analog scale was used to evaluate the associated discomfort. RESULTS: There was no difference (p > 0.05) in VAL between the three intensities before and after exercise. However, we found that stimulating at 100 % OSI may overestimate the extent of peripheral fatigue during exercise, whereas 150 % OSI stimulations led to greater discomfort associated with doublet stimulations as well as to an increased antagonist co-activation compared to 100 % OSI. CONCLUSION: We recommend using 120 % OSI, as it constitutes a good trade-off between discomfort and reliable measurements.

Self reported physical activity, public health, and perceived environment: results from a comparative European study

The focus of physical activity promotion is moving from methods for increasing health enhancing physical activity on the individual level to higher level strategies including environmental and policy approaches. Scientific inquiry, traditionally related to individual-based strategies, requires adaptation and refinement when environmental and policy changes become more relevant. The objective of this study is to investigate the significance for behaviour and health of community-based environments that encourage physical activity. DESIGN AND SETTING The article presents data and results from a cross sectional comparative survey of the general population in six European countries (Belgium, Finland, Germany (East and West), Netherlands, Spain, Switzerland). Specifically, the relation between perceived community-based opportunities for physical activity, self reported physical activity, and self rated health status is investigated. PARTICIPANTS Representative samples of general populations (adults 18 years or older). Overall response rate: 53.5%. Sample sizes realised: Belgium: n=389; Finland: n=400; Germany (East): n = 913; Germany (West): n=489; Netherlands: n=366; Spain: n=380; Switzerland: n=406. MAIN RESULTS Analyses show that best opportunities are reported by people who are lightly to moderately physically active. People's self rated health is moderately, but significantly associated with both perceived opportunities, and physical activity itself. These predictors interact in that especially for women, the health impact of physical activity is more pronounced in case of good opportunities. CONCLUSIONS The paper shows the potential of opportunities within residential and community environments with regard to physical activity, both for behaviour and health. Opportunities may enable the population, especially women, to develop an active lifestyle, and thus improve their health. Future studies with objective indicators for physical activity related environments should test the findings that are based on perceptions.

Ensemble methods for environmental data modelling with support vector regression

This paper investigates the use of ensemble of predictors in order to improve the performance of spatial prediction methods. Support vector regression (SVR), a popular method from the field of statistical machine learning, is used. Several instances of SVR are combined using different data sampling schemes (bagging and boosting). Bagging shows good performance, and proves to be more computationally efficient than training a single SVR model while reducing error. Boosting, however, does not improve results on this specific problem.

Gene-disease network analysis reveals functional modules in mendelian, complex and environmental diseases

AbstractBACKGROUND: Scientists have been trying to understand the molecular mechanisms of diseases to design preventive and therapeutic strategies for a long time. For some diseases, it has become evident that it is not enough to obtain a catalogue of the disease-related genes but to uncover how disruptions of molecular networks in the cell give rise to disease phenotypes. Moreover, with the unprecedented wealth of information available, even obtaining such catalogue is extremely difficult.PRINCIPAL FINDINGS: We developed a comprehensive gene-disease association database by integrating associations from several sources that cover different biomedical aspects of diseases. In particular, we focus on the current knowledge of human genetic diseases including mendelian, complex and environmental diseases. To assess the concept of modularity of human diseases, we performed a systematic study of the emergent properties of human gene-disease networks by means of network topology and functional annotation analysis. The results indicate a highly shared genetic origin of human diseases and show that for most diseases, including mendelian, complex and environmental diseases, functional modules exist. Moreover, a core set of biological pathways is found to be associated with most human diseases. We obtained similar results when studying clusters of diseases, suggesting that related diseases might arise due to dysfunction of common biological processes in the cell.CONCLUSIONS: For the first time, we include mendelian, complex and environmental diseases in an integrated gene-disease association database and show that the concept of modularity applies for all of them. We furthermore provide a functional analysis of disease-related modules providing important new biological insights, which might not be discovered when considering each of the gene-disease association repositories independently. Hence, we present a suitable framework for the study of how genetic and environmental factors, such as drugs, contribute to diseases.AVAILABILITY: The gene-disease networks used in this study and part of the analysis are available at http://ibi.imim.es/DisGeNET/DisGeNETweb.html#Download

The role of the pathologist in tissue banking: European Consensus Expert Group Report.

Human tissue biobanking encompasses a wide range of activities and study designs and is critical for application of a wide range of new technologies (-"omics") to the discovery of molecular patterns of disease and for implementation of novel biomarkers into clinical trials. Pathology is the cornerstone of hospital-based tissue biobanking. Pathologists not only provide essential information identifying the specimen but also make decisions on what should be biobanked, making sure that the timing of all operations is consistent with both the requirements of clinical diagnosis and the optimal preservation of biological products. This document summarizes the conclusions of a Pathology Expert Group Meeting within the European Biological and Biomolecular Research Infrastructure (BBMRI) Program. These recommendations are aimed at providing guidance for pathologists as well as for institutions hosting biobanks on how to better integrate and support pathological activities within the framework of biobanks that fulfill international standards.

Evidence for morphological and adaptive genetic divergence between lake and stream habitats in European minnows (Phoxinus phoxinus, Cyprinidae).

Natural selection drives local adaptation, potentially even at small temporal and spatial scales. As a result, adaptive genetic and phenotypic divergence can occur among populations living in different habitats. We investigated patterns of differentiation between contrasting lake and stream habitats in the cyprinid fish European minnow (Phoxinus phoxinus) at both the morphological and genomic levels using geometric morphometrics and AFLP markers, respectively. We also used a spatial correlative approach to identify AFLP loci associated with environmental variables representing potential selective forces responsible for adaptation to divergent habitats. Our results identified different morphologies between lakes and streams, with lake fish presenting a deeper body and caudal peduncle compared to stream fish. Body shape variation conformed to a priori predictions concerning biomechanics and swimming performance in lakes vs. streams. Moreover, morphological differentiation was found to be associated with several environmental variables, which could impose selection on body and caudal peduncle shape. We found adaptive genetic divergence between these contrasting habitats in the form of 'outlier' loci (2.9%) whose genetic divergence exceeded neutral expectations. We also detected additional loci (6.6%) not associated with habitat type (lake vs. stream), but contributing to genetic divergence between populations. Specific environmental variables related to trophic dynamics, landscape topography and geography were associated with several neutral and outlier loci. These results provide new insights into the morphological divergence and genetic basis of adaptation to differentiated habitats.

Local adaptation maintains clinal variation in melanin-based coloration of European barn owls (Tyto alba).

Ecological parameters vary in space, and the resulting heterogeneity of selective forces can drive adaptive population divergence. Clinal variation represents a classical model to study the interplay of gene flow and selection in the dynamics of this local adaptation process. Although geographic variation in phenotypic traits in discrete populations could be remainders of past adaptation, maintenance of adaptive clinal variation requires recurrent selection. Clinal variation in genetically determined traits is generally attributed to adaptation of different genotypes to local conditions along an environmental gradient, although it can as well arise from neutral processes. Here, we investigated whether selection accounts for the strong clinal variation observed in a highly heritable pheomelanin-based color trait in the European barn owl by comparing spatial differentiation of color and of neutral genes among populations. Barn owl's coloration varies continuously from white in southwestern Europe to reddish-brown in northeastern Europe. A very low differentiation at neutral genetic markers suggests that substantial gene flow occurs among populations. The persistence of pronounced color differentiation despite this strong gene flow is consistent with the hypothesis that selection is the primary force maintaining color variation among European populations. Therefore, the color cline is most likely the result of local adaptation.

The metabolic syndrome in hypertension: European society of hypertension position statement.

The metabolic syndrome considerably increases the risk of cardiovascular and renal events in hypertension. It has been associated with a wide range of classical and new cardiovascular risk factors as well as with early signs of subclinical cardiovascular and renal damage. Obesity and insulin resistance, beside a constellation of independent factors, which include molecules of hepatic, vascular, and immunologic origin with proinflammatory properties, have been implicated in the pathogenesis. The close relationships among the different components of the syndrome and their associated disturbances make it difficult to understand what the underlying causes and consequences are. At each of these key points, insulin resistance and obesity/proinflammatory molecules, interaction of demographics, lifestyle, genetic factors, and environmental fetal programming results in the final phenotype. High prevalence of end-organ damage and poor prognosis has been demonstrated in a large number of cross-sectional and a few number of prospective studies. The objective of treatment is both to reduce the high risk of a cardiovascular or a renal event and to prevent the much greater chance that metabolic syndrome patients have to develop type 2 diabetes or hypertension. Treatment consists in the opposition to the underlying mechanisms of the metabolic syndrome, adopting lifestyle interventions that effectively reduce visceral obesity with or without the use of drugs that oppose the development of insulin resistance or body weight gain. Treatment of the individual components of the syndrome is also necessary. Concerning blood pressure control, it should be based on lifestyle changes, diet, and physical exercise, which allows for weight reduction and improves muscular blood flow. When antihypertensive drugs are necessary, angiotensin-converting enzyme inhibitors, angiotensin II-AT1 receptor blockers, or even calcium channel blockers are preferable over diuretics and classical beta-blockers in monotherapy, if no compelling indications are present for its use. If a combination of drugs is required, low-dose diuretics can be used. A combination of thiazide diuretics and beta-blockers should be avoided.

Cross-country differences in disclosure quality: a study of fair value disclosures by european real estate companies

Companies are under IAS 40 required to report fair values of investment properties on the balance sheet or to disclose them in the notes. The standard requires also that companies have to disclose the methods and significant assumptions applied in determining fair values of investment properties. However, IAS 40 does not include any illustrative examples or other guidance on how to apply the disclosure requirements. We use a sample with publicly traded companies from the real estate sector in the EU. We find that a majority of the companies use income based methods for the measurement of fair values but there are considerable cross-country variations in the level of disclosures about the assumptions used in determining fair values. More specifically, we find that Scandinavian and German origin companies disclose more than French and English origin companies. We also test whether disclosure quality is associated with enforcement quality measured with the “Rule of Law” index according to Kaufmann et al. (2010), and associated with a secrecy- versus transparency-measure based on Gray (1988). We find a positive association between disclosure and earnings quality and a negative association with secrecy.

Results of a consensus meeting on the use of argatroban in patients with heparin-induced thrombocytopenia requiring antithrombotic therapy - a European Perspective.

Argatroban has been introduced as an alternative parenteral anticoagulant for HIT-patients in several European countries in 2005. In 2009 a panel of experts discussed their clinical experience with argatroban balancing risks and benefits of argatroban treatment in managing the highly procoagulant status of HIT-patients. This article summarizes the main conclusions of this round table discussion. An ongoing issue is the appropriate dosing of argatroban in special patient groups. Therefore, dosing recommendations for different HIT-patient groups (ICU patients; non-ICU patients, paediatric patients, and for patients undergoing renal replacement therapies) are summarized in this consensus statement. Because of the strong correlation between argatroban dosing requirements and scores used to characterize the severity of illness (APACHE; SAPS, SOFA) suitable dosing nomograms are given. This consensus statement contributes to clinically relevant information on the appropriate use and monitoring of argatroban based on the current literature, and provides additional information from clinical experience. As the two other approved drugs for HIT, danaparoid and lepirudin are either currently not available due to manufacturing problems (danaparoid) or will be withdrawn from the market in 2012 (lepirudin), this report should guide physicians who have limited experience with argatroban how to use this drug safely in patients with HIT.

Integrating life cycle costs and environmental impacts of composite rail car-bodies for a Korean train

Background, aim, and scope A coupled Life Cycle Costing and life cycle assessment has been performed for car-bodies of the Korean Tilting Train eXpress (TTX) project using European and Korean databases, with the objective of assessing environmental and cost performance to aid materials and process selection. More specifically, the potential of polymer composite car-body structures for the Korean Tilting Train eXpress (TTX) has been investigated. Materials and methods This assessment includes the cost of both carriage manufacturing and use phases, coupled with the life cycle environmental impacts of all stages from raw material production, through carriage manufacture and use, to end-of-life scenarios. Metallic carriages were compared with two composite options: hybrid steel-composite and full-composite carriages. The total planned production for this regional Korean train was 440 cars, with an annual production volume of 80 cars. Results and discussion The coupled analyses were used to generate plots of cost versus energy consumption and environmental impacts. The results show that the raw material and manufacturing phase costs are approximately half of the total life cycle costs, whilst their environmental impact is relatively insignificant (3-8%). The use phase of the car-body has the largest environmental impact for all scenarios, with near negligible contributions from the other phases. Since steel rail carriages weigh more (27-51%), the use phase cost is correspondingly higher, resulting in both the greatest environmental impact and the highest life cycle cost. Compared to the steel scenario, the hybrid composite variant has a lower life cycle cost (16%) and a lower environmental impact (26%). Though the full composite rail carriage may have the highest manufacturing cost, it results in the lowest total life cycle costs and lowest environmental impacts. Conclusions and recommendations This coupled cost and life cycle assessment showed that the full composite variant was the optimum solution. This case study showed that coupling of technical cost models with life cycle assessment offers an efficient route to accurately evaluate economic and environmental performance in a consistent way.

Unexpected genomic variability in clinical and environmental strains of the pathogenic yeast Candida parapsilosis

Invasive candidiasis is the most commonly reported invasive fungal infection worldwide. Although Candida albicans remains the main cause, the incidence of emerging Candida species, such as C. parapsilosis is increasing. It has been postulated that C. parapsilosis clinical isolates result from a recent global expansion of a virulent clone. However, the availability of a single genome for this species has so far prevented testing this hypothesis at genomic scales. We present here the sequence of three additional strains from clinical and environmental samples. Our analyses reveal unexpected patterns of genomic variation, shared among distant strains, that argue against the clonal expansion hypothesis. All strains carry independent expansions involving an arsenite transporter homolog, pointing to the existence of directional selection in the environment, and independent origins of the two clinical isolates. Furthermore, we report the first evidence for the existence of recombination in this species. Altogether, our results shed new light onto the dynamics of genome evolution in C. parapsilosis.

Coordination and collaboration in European research towards healthy and safe nanomaterials

Nanotechnology is becoming part of our daily life in a wide range of products such as computers, bicycles, sunscreens or nanomedicines. While these applications already become reality, considerable work awaits scientists, engineers, and policy makers, who want such nanotechnological products to yield a maximum of benefit at a minimum of social, environmental, economic and (occupational) health cost. Considerable efforts for coordination and collaboration in research are needed if one wants to reach these goals in a reasonable time frame and an affordable price tag. This is recognized in Europe by the European Commission which funds not only research projects but also supports the coordination of research efforts. One of these coordination efforts is NanoImpactNet, a researcher-operated network, which started in 2008 promote scientific cross-talk across all disciplines on the health and environmental impact of nanomaterials. Stakeholders contribute to these activities, notably the definition of research and knowledge needs. Initial discussions in this domain focused on finding an agreement on common metrics, and which elements are needed for standardized approaches for hazard and exposure identification. There are many nanomaterial properties that may play a role. Hence, to gain the time needed to study this complex matter full of uncertainties, researchers and stakeholders unanimously called for simple, easy and fast risk assessment tools that can support decision making in this rapidly moving and growing domain. Today, several projects are starting or already running that will develop such assessment tools. At the same time, other projects investigate in depth which factors and material properties can lead to unwanted toxicity or exposure, what mechanisms are involved and how such responses can be predicted and modelled. A vision for the future is that once these factors, properties and mechanisms are understood, they can and will be accounted for in the development of new products and production processes following the idea of "Safety by Design". The promise of all these efforts is a future with nanomaterials where most of their risks are recognized and addressed before they even reach the market.

Installation Information requirements in the GPLv3 and LGPLv3

One of the major changes introduced in the GPLv3 and LGPLv3 is the clause preventing "tivoisation". Richard Stallman defines Tivoisation as "the practice of designing hardware so that a modified version cannot function properly". In this presentation we will go through the reasons of why the information installation requirement was introduced, how you can comply with this requirement and why you may want to think about it now rather than later.