Avaliação in vitro da atividade antifúngica de óleos essenciais e extratos de plantas presentes na região amazônica sobre cepa de Candida albicans

A candidíase é uma doença fúngica oportunista causada pela proliferação de espécies de Candida, principalmente a Candida albicans, sendo a espécie mais patogênica em humanos. Muitos antifúngicos existentes no mercado apresentam efeitos colaterais indesejáveis ou podem induzir a resistência fúngica, principalmente em indivíduos imunodeprimidos. Em odontologia, as pesquisas com produtos naturais têm aumentado nos últimos anos, devido à busca por novos produtos com maior atividade farmacológica, com menor toxicidade e mais acessíveis à população. Dentro dessa perspectiva, o objetivo desta pesquisa foi avaliar in vitro a atividade antifúngica de óleos e extratos vegetais presentes na região Amazônica e determinar a concentração inibitória mínima das espécies que apresentaram atividade antifúngica frente à cepa padrão de Candida albicans (ATCC 90028). A atividade antifúngica dos óleos essenciais Copaifera multijuga, Carapa guianenses, Piper aduncum e Piper hispidinervum foi realizada pelo método de difusão em meio sólido utilizando cavidades em placa “in natura” e em diluições de 32 a 2% para determinação da concentração inibitória mínima. Os extratos Annona glabra, Azadiractha indica, Bryophyllum calycinum, Eleutherine plicata, Mammea americana, Psidium guajava e Syzygium aromaticum foram testados nas concentrações de 500mg/mL, 250mg/mL, 125mg/mL e 62,5 mg/mL e a atividade antifúngica foi realizada pelo método de difusão em meio sólido utilizando discos de papel filtro. Os óleos testados, não apresentaram efeito antifúngico sobre a cepa de Candida albicans, e dos extratos testados somente os extratos de Eleutherine plicata, Psidium guajava e Syzygium aromaticum apresentaram atividade antifúngica com concentração inibitória mínima, respectivamente, de 250mg/mL, 125mg/mL e 62,5mg/mL Diante dos resultados apresentados, os extratos de Eleutherine plicata, Psidium guajava e Syzygium aromaticum apresentam potencial efeito inibitório para crescimento de Candida albicans, servindo de guia para a seleção de plantas com atividades antifúngicas para futuros trabalhos toxicológico e farmacológico.

Evaluation of bond strength and thickness of adhesive layer according to the techniques of applying adhesives in composite resin restorations

Adhesive restorations have increasingly been used in dentistry, and the adhesive system application technique may determine the success of the restorative procedure. The aim of this study was to evaluate the influence of the application technique of two adhesive systems (Clearfil SE Bond and Adper Scotchbond MultiPurpose) on the bond strength and adhesive layer of composite resin restorations. Eight human third molars were selected and prepared with Class I occlusal cavities. The teeth were restored with composite using various application techniques for both adhesives, according to the following groups (n = 10): group 1 (control), systems were applied and adhesive was immediately light activated for 20 seconds without removing excesses; group 2, excess adhesive was removed with a gentle jet of air for 5 seconds; group 3, excess was removed with a dry microbrush-type device; and group 4, a gentle jet of air was applied after the microbrush and then light activation was performed. After this, the teeth were submitted to microtensile testing. For the two systems tested, no statistical differences were observed between groups 1 and 2. Groups 3 and 4 presented higher bond strength values compared with the other studied groups, allowing the conclusion that excess adhesive removal with a dry micro-brush could improve bond strength in composite restorations. Predominance of adhesive fracture and thicker adhesive layer were observed via scanning electron microscopy (SEM) in groups 1 and 2. For groups 3 and 4, a mixed failure pattern and thinner adhesive layer were verified. Clinicians should be aware that excess adhesive may negatively affect bond strength, whereas a thin, uniform adhesive layer appears to be favorable. (Quintessence Int 2013;44:9-15)

Library Classifications Criticism: Universality, Poststructuralism and Ethics

We study library classifications criticisms from a poststructuralist and pragmatist point of view that rejects the idea of universality in knowledge organization systems. From this perspective, we analize the seminal texts on library classifications criticisms and conclude that the seek of neutrality in some of these texts is not only an impossible goal but also a contradiction in the representation of different cultures. Therefore, we suggest the commitment with the goals and the recognition of bias in library classifications as an important device for achieving a transcultural ethics in knowledge organization and representation.

Aesthetic rehabilitation of oligodontia in primary dentition with adhesive partial denture

The primary teeth are essential for bone development and establishment of the arches on occlusion. Thus, the congenitally absence of teeth may trigger a shift in the balance of the occlusion, promoting disharmony in the structures of the maxilla-mandibular system. However, some interventions are possible to be performed in these cases even in pediatric patients, to redirect growth, preventing growth deviations and reestablishing the aesthetic. The aim of this paper is to report the treatment of a 4-year-old child presenting congenitally absence of mandibular central and lateral incisors and maxilla lateral incisors, which consequently compromises aesthetics, occlusal function, and the development and the functional growth of the bones. The oral rehabilitation was performed with an adhesive partial denture, which was able to restore the aesthetic and the occlusal function, therefore being a viable alternative in the treatment of this patient of little age.

Influencia dos hábitos de sucção na manifestação de dor temporo-mandibular: revisão sistemática

Objective: To assess the attitudes and knowledge about hepatitis by scholars and dental practitioners from Recife and its metropolitan region. Method: The research protocol was submitted and approved by the Ethics and Human Research Committee of the Federal University of Pernambuco. There were included 230 undergraduate students in dentistry and 104 dentists who exercise their professional activity in Recife and its Metropolitan Region. They signed a consent form and answered a questionnaire, the evaluative instrument, with objective questions about biosafety, transmission of hepatitis and sexually transmitted diseases. Results: About the types of hepatitis 133 (57.8%) students and 61 (58.7%) professionals claimed to know the types A, B and C. Concerning transmission 31 (13.5%) students and 25 (24.0%) professionals said that the main route of transmission were sexual and bloodstream respectively. Relating to imunization 221 (96.1%) students and 99 (95.2%) professionals reported that have been vaccinated against hepatitis B, however, only 126 (54.8%) students and 55 (52.9%) professionals have followed the immunization’s schema. Regarding the cleaning of the office equipment, 18.7% of the students replied that they do not know who does it. 56.7% of professionals said that it was performed with alcohol 70 ° GL.Conclusions: The findings indicate that there is a concern for biosafety but the knowledge about the forms of hepatitis transmission and biosecurity measures need to be better settled.

Assessment of CT numbers in limited and medium field-of-view scans taken using Accuitomo 170 and Veraviewepocs 3De cone-beam computed tomography scanners

To assess the influence of anatomic location on the relationship between computed tomography (CT) number and X-ray attenuation in limited and medium field-of-view (FOV) scans. Materials and Methods Tubes containing solutions with different concentrations of K2HPO4 were placed in the tooth sockets of a human head phantom. Cone-beam computed tomography (CBCT) scans were acquired, and CT numbers of the K2HPO4 solutions were measured. The relationship between CT number and K2HPO4 concentration was examined by linear regression analyses. Then, the variation in CT number according to anatomic location was examined. Results The relationship between K2HPO4 concentration and CT number was strongly linear. The slopes of the linear regressions for the limited FOVs were almost 2-fold lower than those for the medium FOVs. The absolute CT number differed between imaging protocols and anatomic locations. Conclusion There is a strong linear relationship between X-ray attenuation and CT number. The specific imaging protocol and anatomic location of the object strongly influence this relationship.

A survey of the management of patients with temporomandibular disorders by general dental practitioners in southern Brazil

Purpose: Temporomandibular disorders (TMD) are recognized as one of the mostcontroversial topics in dentistry, despite the fact that both basic science and clinicalresearchers have currently reached some degree of consensus. This study aimed toconduct a questionnaire-based survey about the management of TMD patients bygeneral dental practitioners (GDPs).Materials and Methods: One hundred fifty-one GDPs with a private practice in a cityof southern Brazil were included, independent of school of origin, gender, graduationyear, and curriculum content. All participants were administered a questionnaire aboutthe management of patients with TMD, and the responses were analyzed by binomialand chi-square tests (α = 0.05).Results: Of the GDPs, 88.7% received TMD patients, who were primarily diagnosedon the basis of medical history (36.6%) or physical examination (30.4%). Of these,65.4% referred the patients elsewhere, primarily to specialists in occlusion (36.1%) ororthodontics (29.7%). Occlusal splinting was the most commonly used managementmodality (20.8%), followed by occlusal adjustment (18.1%) and pharmacotherapy(16.6%). Splints were fabricated in maximum habitual intercuspation or centric re-lation depending on individual patient (54.8%). The hard stabilization form was themost common type of appliance used (35.0%). Moreover, 73.8% of the GDPs didnot employ semi-adjustable articulators, and 69.5% adjusted the appliances at thetime of fixing. The duration of splint use and the frequency of follow-up were con-sidered patient dependent by 62.1% and 72.8%, respectively. GDPs considered thetwo major TMD etiologic categories as multifactorial (20.8%) and occlusion (19.9%).Multidisciplinary medical and dental treatment was considered necessary by 97.9%.Conclusions: The evaluated general dental practitioners manage TMD patients ac-cording to international guidelines.

An alternative technique for fabrication of frameworks in an immediate loading implant fixed mandibular prosthesis

The oral rehabilitation of edentulous patients with immediate loading has become a safe procedure with high predictability. The success is related to immediate fabrication of a passive fit framework to attach the implants. Based on these considerations, this case report shows an alternative technique for mandibular rehabilitation using implants immediately loaded, where the framework was fabricated using cylinders with internal reinforcement and precast pieces, electrowelding, and conventional welding providing esthetics and function to the patient in a short period of time.

Comparative analysis of three rotary instruments used for coronal pre-enlargement in radicular dentin thickness and root canal area of mandibular molars

Purpose: The purpose of this study was to evaluate the increase of the cervical area and dentin thickness in mesial and distal walls of the mesial canals from mandibular molars after the use of LA Axxess (LA), CP Drill (CP) and Gates-Glidden (GG) rotary instruments. Material and Methods: Sixty root canals from thirty mandibular first molar were sectioned 3 mm below the cement-enamel junction, divided in 3 groups (n = 20 root canals, each) according to rotary instrument used, and the cervical images were captured before and after pre-enlargement instrumentation. The increase of the instrumented cervical area (mm2) and the dentin removal thickness (mm), at mesial and distal walls were calculated using Image tools software, by comparison of images. Data were analyzed by ANOVA and Tukey tests (p=0.05). Results: All rotary instruments promoted thickness reduction in dentin walls. In mesial wall, all rotary instruments promoted similar thickness reduction of dentinal wall and did not differ from each other (p>0.05). In distal wall, LA Axxess instrument promoted higher dentin thickness reduction than other groups (p<0.05). The three rotary instruments promoted different increase at the instrumented cervical area (p<0.05), LA promoted the highest increase area and GG and CP presented similar results. Conclusion: LA 20/0.06 promoted the highest thickness reduction in distal wall and increase of cervical area of root canal. On the other hand, CP was the safest instrument, with lower dentin removal of distal wall and similar increased area to GG.

Fragment reattachment after atypical crown fracture in maxillary central incisor

Background. Fracture by trauma is one of the most common types of dental injury in the permanent dentition among children and teenagers. Aim. The aim of this study was to report the treatment performed to an atypical dental trauma case in a maxillary central incisor of a young patient by means of reattachment of the tooth fragment. Case Description. A 12-year-old male patient suffered a vertical crown fracture to the maxillary right central incisor. After clinical and radiographic examinations, a conservative restorative treatment which consisted in the reattachment of the tooth fragment with flow resin was performed in order to preserve the dental element and to obtain maximum aesthetics. Conclusion. The reattachment of fractured fragment is a fast and easy technique that can be used successfully as an option to restore dental element which suffered trauma. Clinical Significance. This technique restores the aesthetics and function of the dental element with minimal discomfort to the patient.

Dentistry teachers and the burnout syndrome

The Burnout Syndrome is considered a psychosocial problem to which teachers are routinely exposed. This study was conducted to estimate the prevalence of burnout in Dentistry teachers and its relation to relevant socio-demographic variables. The participants were 70 teachers from the undergraduate Dentistry Course, Faculty of Dentistry of Araraquara – UNESP. Oldenburg Burnout Inventory (OLBI) was used. The prevalence of burnout was estimated. In order to compare performed. Mean age of participants was 46.0 ± 6.1 and teaching experience was 19.6±7.6 years. The prevalence of burnout was 17.1%. Low mean scores for Exhaustion (2.11±0.61) and Disengagement (1.73±0.50) were observed. There reported taking medication due to work (p=0.008) and for those who have thought about quit teaching (p=0.001). There scores according to the habit of taking medication, the experience as a teacher and gender

Influence of light source and immersion media in surface roughness and hardness of a nanofilled composite resin

The study evaluated the influence of light curing units and immersion media on superficial roughness and microhardness of the nanofilled composite resin Supreme XT (3M/ESPE). Light curing units used were: XL 3000 (3M/ESPE), Jet Lite 4000 Plus (JMorita) and Ultralume Led 5 (Ultradent) and immersion media were artificial saliva, Coke®, tea and coffee, totaling 12 experimental groups. Specimens (10mm x 2mm) were immersed in each respective solution for 5 seconds, three times a day, during 60 days and so, were submitted to measure of superficial roughness (Ra) and Vickers hardness. Data were subjected to two-way ANOVA test (p<0.05). Results showed that only the light source factor showed statistically difference for hardness. It was observed that the hardness of the composite resin Filtek Supreme XT (3M/ESPE) was influenced by the light source (p<0.01) independently of the immersion media (p= 0.35) and the Jet Lite 4000 Plus (JMorita) was the light curing unit that presented lower values. In relation to surface roughness, it was noted no-significant statistical difference for light source (p=0.84), when specimens were immersed in different beverages (p=0.35).

Violence against children and adolescents: awareness and attitudes of Brazilian dentists

Violence against children and adolescents, ranging from negligence to sexual abuse, is an imperative public health problem. The ill treatments are considered as nonaccidental traumas, actions or omissions against children, who suffer physical or emotional violence. The main perpetrators are fathers, mothers, guardians, family, friends or the children‘s primary caretaker. It is very important to identify abuse cases, because this allows proper medical and legal intervention. In Brazil, the law n. 8.069, of July 13, 1990, known as the ECA -Statute for Children and Adolescents (SCA), stipulates the obligation to report suspected or confirmed cases of ill treatment against a child or adolescent to the Guardianship Council of the respective locality. The health professionals play a crucial role with regard to identifying cases of violence, collecting information, making early diagnosis of suspect cases and reporting such cases to the authorities. The dentists can contribute significantly, as most injuries occur in the orofacial region. Bite marks, burns, bruising, among others, are easily identified during a dental consultation. The aim of this work was to verify the awareness and attitudes of Brazilian dentists concerning violence against children and adolescents. This research was approved by the Research Ethics Committee of the Faculty of Dentistry of Araraquara – São Paulo State University (FOAr – UNESP). Sixty-three dentists answered an open and closed questionnaire concerning their formation, knowledge, experience and attitudes towards ill-treated children and adolescents. Among other results, thirty-nine dentists (61.9%) affirmed to have the means to identify illtreatment cases, 13 (20.6%) reported having some experience on this matter, but only 8 reported the cases to the Council of Guardianship, as determined by Brazilian law. Twenty percent of the reasons presented for not notifying the Council were fear of reprisal, and 60.0% were uncertain concerning the ethical and legal implications. Physical violence was the most reported form of identified violence (76.9%), followed by negligence (38.5%). Among the 13 professionals that had experience with violence cases, in 10 cases the perpetrators were identified – in 70.0% of the cases, the parents were the originators of such violence. It was concluded that further formation and orientation are necessary, in order to prepare dentists to act correctly when, during their professional activities, they encounter cases of violence against children and adolescents.

Risk muskuloskeletal disorders in upper limbs in dental students: concordance of different methods for estimation of body angle

The purpose of this paper was to evaluate the agreement among different methods used to estimate angular deviation of the body to determine the risk for development of upper limb musculoskeletal disorders in dentistry undergraduates. Materials and Methods: Students (n = 79) enrolled in the final year undergraduate course of the Araraquara School of Dentistry-Sγo Paulo State University-UNESP were evaluated. Photographs were taken of students performing clinical procedures. The work postures adopted by each student were evaluated by means of rapid upper limb assessment (RULA). The basis used to obtain the individual's final risk score is the measurement of the angular deviations in the neutral positions of the regions evaluated. Two methods were used to estimate the angular deviation of the body: Visual exam and Image Tool software. A RULA final risk score was attributed to each procedure the student performed (n = 333). Study of the agreement between the methods about risk of musculoskeletal disorders was conducted by means of Kappa (κ) statistics. The level of significance adopted was 5%. Results: Fair agreement (κ = 0.32) between the evaluated methods was verified. Conclusion: The risk for development of upper limb musculoskeletal disorders by dentistry undergraduates evaluated by using RULA was not in agreement with the results obtained by use of visual exam and Image Tool.

Risk of musculoskeletal disorders in upper limbs in dental students: concordance of different methods for estimation of body angle

The purpose of this paper was to evaluate the agreement among different methods used to estimate angular deviation of the body to determine the risk for development of upper limb musculoskeletal disorders in dentistry undergraduates. Materials and Methods: Students (n = 79) enrolled in the final year undergraduate course of the Araraquara School of Dentistry-Sγo Paulo State University-UNESP were evaluated. Photographs were taken of students performing clinical procedures. The work postures adopted by each student were evaluated by means of rapid upper limb assessment (RULA). The basis used to obtain the individual's final risk score is the measurement of the angular deviations in the neutral positions of the regions evaluated. Two methods were used to estimate the angular deviation of the body: Visual exam and Image Tool software. A RULA final risk score was attributed to each procedure the student performed (n = 333). Study of the agreement between the methods about risk of musculoskeletal disorders was conducted by means of Kappa (κ) statistics. The level of significance adopted was 5%. Results: Fair agreement (κ = 0.32) between the evaluated methods was verified. Conclusion: The risk for development of upper limb musculoskeletal disorders by dentistry undergraduates evaluated by using RULA was not in agreement with the results obtained by use of visual exam and Image Tool.