(Table 2) Horizontal ice flow velocities, azimuths (relative to true north), and vertical ice-particle velocities in the vicinity of Vostok Station, Antarctica

In the austral summer seasons 2001/02 and 2002/03, Global Positioning System (GPS) data were collected in the vicinity of Vostok Station to determine ice flow velocities over Lake Vostok. Ten GPS sites are located within a radius of 30 km around Vostok Station on floating ice as well as on grounded ice to the east and to the west of the lake. Additionally, a local deformation network around the ice core drilling site 5G-1 was installed. The derived ice flow velocity for Vostok Station is 2.00 m/a ± 0.01 m/a. Along the flowline of Vostok Station an extension rate of about 10**-5/a (equivalent to 1 cm/km/a) was determined. This significant velocity gradient results in a new estimate of 28700 years for the transit time of an ice particle along the Vostok flowline from the bedrock ridge in the southwest of the lake to the eastern shoreline. With these lower velocities compared to earlier studies and, hence, larger transit times the basal accretion rate is estimated to be 4 mm/a along a portion of the Vostok flowline. An assessment of the local accretion rate at Vostok Station using the observed geodetic quantities yields an accretion rate in the same order of magnitude. Furthermore, the comparison of our geodetic observations with results inferred from ice-penetrating radar data indicates that the ice flow may not have changed significantly for several thousand years.

Content Delivery System for Optimal VoD Streaming

The demand of video contents has rapidly increased in the past years as a result of the wide deployment of IPTV and the variety of services offered by the network operators. One of the services that has especially become attractive to the customers is real-time video on demand (VoD) because it offers an immediate streaming of a large variety of video contents. The price that the operators have to pay for this convenience is the increased traffic in the networks, which are becoming more congested due to the higher demand for VoD contents and the increased quality of the videos. As a solution, in this paper we propose a hierarchical network system for VoD content delivery in managed networks, which implements redistribution algorithm and a redirection strategy for optimal content distribution within the network core and optimal streaming to the clients. The system monitors the state of the network and the behavior of the users to estimate the demand for the content items and to take the right decision on the appropriate number of replicas and their best positions in the network. The system's objectives are to distribute replicas of the content items in the network in a way that the most demanded contents will have replicas closer to the clients so that it will optimize the network utilization and will improve the users' experience. It also balances the load between the servers concentrating the traffic to the edges of the network.

Sistema de telemetría para un vehículo de fórmula S.A.E.

En este proyecto, se ha desarrollado una aplicación electrónica para un coche de competición, en concreto para la fórmula SAE (Society of Automotive Engineers), una competición universitaria en la que cada equipo, formado por estudiantes, debe diseñar, construir y probar un prototipo basándose en una serie de reglas. El objetivo final de la competición es proporcionar a los estudiantes el conocimiento práctico necesario para su futura labor profesional, del cual se pensaba que los estudiantes adolecían al acabar sus estudios universitarios cuando se creó esta competición. La aplicación desarrollada en este proyecto consiste en un sistema de telemetría, utilizado para transmitir los datos proporcionados por los sensores del vehículo a través de un sistema de radiofrecuencia, de manera que se pueda estudiar el comportamiento del coche durante los ensayos a la vez que el coche está rodando y así no depender de un sistema de adquisición de datos del que había que descargarse la información una vez finalizada la sesión de ensayo, como había que hacer hasta el momento. Para la implementación del proyecto, se ha utilizado un kit de desarrollo (Xbee Pro 868) que incluye dos módulos de radio, dos placas de desarrollo, dos cables USB y una antena, el cual ha permitido desarrollar la parte de radio del proyecto. Para transmitir los datos proporcionados por la centralita del vehículo, la cual recoge la información de todos los sensores presentes en el vehículo, se han desarrollado dos placas de circuito impreso. La primera de ellas tiene como elemento principal un microprocesador PIC de la marca Microchip (PIC24HJ64GP502), que recoge los datos proporcionados por la centralita del vehículo a través de su bus CAN de comunicaciones. La segunda placa de circuito impreso tiene como elemento fundamental el transmisor de radio. Dicho transmisor está conectado al microprocesador de la otra placa a través de línea serie. Como receptor de radio se ha utilizado una de las placas de prueba que integraba el kit de desarrollo Xbee Pro 868, la cual recoge los datos que han sido enviados vía radio y los manda a su vez a través de USB a un ordenador donde son monitorizados. Hasta aquí la parte hardware del sistema. En cuanto a la parte software, ha habido que desarrollar una aplicación en lenguaje C, que ejecuta el microprocesador PIC, que se encarga de recoger los datos enviados por la centralita a través del bus CAN (Controller Area Network) y transmitirlos a través de línea serie al chip de radio. Por último, para la monitorización de los datos se han desarrollado dos aplicaciones en LabVIEW, una que recoge los datos a través de USB, los muestra en pantalla y los guarda en un fichero y otra que lee los datos del fichero y los representa gráficamente para permitir un estudio más detallado del comportamiento del vehículo. ABSTRACT In this project, an electronic application has been developed for a race car – Formula SAE car-. Formula SAE is a university championship in which each team, made up of students, should design, construct and test a prototype within certain rules. The final goal of the competition is to enhance the practical knowledge of the students, which was thougth to be poor at the time the competition was created. The application developed in this project consists of a telemetry system, employed to transmit the data provided by the car’s sensors through a radio frequency system, so that it could be possible to study the behaviour of the vehicle during tests and do not depend on a datalogger system as it occurred until now. To carry out the radio module of the project, a Xbee Pro 868 development kit has been used, which includes two radio modules, two development boards, two USB cables and an antenna. To transmit the data provided by the ECU (Engine Control Unit) of the vehicle, which receives information from all the sensors the vehicle has, two printed circuit boards have been built. One of them has a PIC microprocessor of Microchip (PIC24HJ64GP502) which receives the data coming from CAN bus of the ECU. Tha main element of the other printed circuit board is the radio transmitter. This chip receives the data from the microprocessor through its serial line. The development board of the Xbee Pro 868 has been used as receiver. When data arrives to the receiver, it transmits them to a computer through USB where the data are displayed. All this composes the hardware of the system. Regarding the software, a C coded application has been developed. This application is executed by the microprocessor and its function is to receive the data from the bus CAN (Controller Area Network) and send them to the radio transmitter through the microprocessor’s serial line. To show the data on the computer, two LabVIEW applications has been developed. The first one receives the data through the USB port, displays them on the screen and save them to a file and the second one reads the data from the file while represents them graphically to allow studying the behaviour of the car on track.

Diseño de los sistemas de comunicación en plantas de exploración y producción de hidrocarburos

Las plantas industriales de exploración y producción de petróleo y gas disponen de numerosos sistemas de comunicación que permiten el correcto funcionamiento de los procesos que tienen lugar en ella así como la seguridad de la propia planta. Para el presente Proyecto Fin de Carrera se ha llevado a cabo el diseño del sistema de megafonía PAGA (Public Address and General Alarm) y del circuito cerrado de televisión (CCTV) en la unidad de procesos Hydrocrcaker encargada del craqueo de hidrógeno. Partiendo de los requisitos definidos por las especificaciones corporativas de los grupos petroleros para ambos sistemas, PAGA y CCTV, se han expuesto los principios teóricos sobre los que se fundamenta cada uno de ellos y las pautas a seguir para el diseño y demostración del buen funcionamiento a partir de software específico. Se ha empleado las siguientes herramientas software: EASE para la simulación acústica, PSpice para la simulación eléctrica de las etapas de amplificación en la megafonía; y JVSG para el diseño de CCTV. La sonorización tanto de las unidades como del resto de instalaciones interiores ha de garantizar la inteligibilidad de los mensajes transmitidos. La realización de una simulación acústica permite conocer cómo va a ser el comportamiento de la megafonía sin necesidad de instalar el sistema, lo cual es muy útil para este tipo de proyectos cuya ingeniería se realiza previamente a la construcción de la planta. Además se comprueba el correcto diseño de las etapas de amplificación basadas en líneas de alta impedancia o de tensión constante (100 V). El circuito cerrado de televisión (CCTV) garantiza la transmisión de señales visuales de todos los accesos a las instalaciones y unidades de la planta así como la visión en tiempo real del correcto funcionamiento de los procesos químicos llevados a cabo en la refinería. El sistema dispone de puestos de control remoto para el manejo y gestión de las cámaras desplegadas; y de un sistema de almacenamiento de las grabaciones en discos duros (RAID-5) a través de una red SAN (Storage Area Network). Se especifican las diferentes fases de un proyecto de ingeniería en el sector de E&P de hidrocarburos entre las que se destaca: propuesta y adquisición, reunión de arranque (KOM, Kick Off Meeting), estudio in situ (Site Survey), plan de proyecto, diseño y documentación, procedimientos de pruebas, instalación, puesta en marcha y aceptaciones del sistema. Se opta por utilizar terminología inglesa dado al ámbito global del sector. En la última parte del proyecto se presenta un presupuesto aproximado de los materiales empleados en el diseño de PAGA y CCTV. ABSTRACT. Integrated communications for Oil and Gas allows reducing risks, improving productivity, reducing costs, and countering threats to safety and security. Both PAGA system (Public Address and General Alarm) and Closed Circuit Television have been designed for this project in order to ensure a reliable security of an oil refinery. Based on the requirements defined by corporate specifications for both systems (PAGA and CCTV), theoretical principles have been presented as well as the guidelines for the design and demonstration of a reliable design. The following software has been used: EASE for acoustic simulation; PSpice for simulation of the megaphony amplification loops; and JVSG tool for CCTV design. Acoustic for both the units and the other indoor facilities must ensure intelligibility of the transmitted messages. An acoustic simulation allows us to know how will be the performance of the PAGA system without installing loudspeakers, which is very useful for this type of project whose engineering is performed prior to the construction of the plant. Furthermore, it has been verified the correct design of the amplifier stages based on high impedance lines or constant voltage (100 V). Closed circuit television (CCTV) ensures the transmission of visual signals of all access to facilities as well as real-time view of the proper functioning of chemical processes carried out at the refinery. The system has remote control stations for the handling and management of deployed cameras. It is also included a storage system of the recordings on hard drives (RAID - 5) through a SAN (Storage Area Network). Phases of an engineering project in Oil and Gas are defined in the current project. It includes: proposal and acquisition, kick-off meeting (KOM), Site Survey, project plan, design and documentation, testing procedures (SAT and FAT), installation, commissioning and acceptance of the systems. Finally, it has been presented an estimate budget of the materials used in the design of PAGA and CCTV.

State Convergence Theory Applied to a Delayed Teleoperation System

State convergence is a control strategy that was proposed in the early 2000s to ensure stability and transparency in a teleoperation system under specific control gains values. This control strategy has been implemented for a linear system with or without time delay. This paper represents the first attempt at demonstrating, theoretically and experimentantally, that this control strategy can also be applied to a nonlinear teleoperation system with n degrees of freedom and delay in the communication channel. It is assumed that the human operator applies a constant force on the local manipulator during the teleoperation. In addition, the interaction between the remote manipulator and the environment is considered passive. Communication between the local and remote sites is made by means of a communication channel with variable time delay. In this article the theory of Lyapunov-Krasovskii was used to demonstrate that the local-remote teleoperation system is asymptotically stable.

Control of a Teleoperation System by State Convergence with Variable Time Delay

In this paper, we propose a novel control scheme for bilateral teleoperation of n degree-of-freedom (DOF) nonlinear robotic systems with time-varying communication delay. We consider that the human operator contains a constant force on the local manipulator. The local and remote manipulators are coupled using state convergence control scheme. By choosing a Lyapunov-Krasovskii functional, we show that the local-remote teleoperation system is asymptotically stable. It is also shown that, in the case of reliable communication protocols, the proposed scheme guarantees that the remote manipulator tracks the delayed trajectory of the local manipulator. The time delay of communication channel is assumed to be unknown and randomly time varying, but the upper bounds of the delay interval and the derivative of the delay are assumed to be known.

Stability Analysis of Teleoperation System by State Convergence with Variable Time Delay

We propose a novel control scheme for bilateral teleoperation of n degree-of-freedom (DOF) nonlinear robotic systems with time-varying communication delay. A major contribution from this work lies in the demonstration that the structure of a state convergence algorithm can be also applied to nth-order nonlinear teleoperation systems. By choosing a Lyapunov Krasovskii functional, we show that the local-remote teleoperation system is asymptotically stable. The time delay of communication channel is assumed to be unknown and randomly time varying, but the upper bounds of the delay interval and the derivative of the delay are assumed to be known.

Efectos territoriales de las denominaciones de origen protegidas de aceite de oliva en España

La implementación de indicaciones geográficas, generan distintos efectos socio-económicos, tecnológicos y ambientales, no sólo a nivel de los productores directamente involucrados, sino también en el marco del sistema agroalimentario local (SIAL). Entre estos últimos, se destaca la organización colectiva de los productores y el desarrollo de una gobernanza, a partir del conjunto de actividades desarrolladas por el Consejo Regulador (CR), en torno al control de calidad y la promoción del producto. El concepto de gobernanza territorial implica llevar a cabo procesos de organización colectiva en red en los que tienen lugar procesos de coordinación multi-nivel entre los agentes, las empresas y las instituciones locales, en un contexto de asimetría en la información y de la existencia de numerosos decisores. El objetivo de esta Tesis Doctoral es realizar un aporte metodológico para el estudio de la gobernanza territorial en sistemas agroalimentarios localizados, a partir de la construcción de indicadores (de calidad, innovación, efectos económicos y prácticas ambientales) y el análisis de las redes de colaboración en materia de difusión del conocimiento e innovaciones técnicas, organizativas y comerciales en la Comarca de Sierra Mágina. Para responder el objetivo se aplica análisis de redes sociales y se construyen indicadores sintéticos para valorizar los efectos. Se realizan encuestas a la totalidad de almazaras presentes en la Comarca de Sierra Mágina, tanto a las que poseen el signo de calidad como a las que no cuentan con dicha marca territorial y entrevistas a testigos privilegiados. En las mismas se consulta sobre las actividades y proyectos que realizan en forma conjunta con otras almazaras e instituciones, así como los actores o referentes a quiénes consultan en temas relacionados con la calidad en la producción olivícola y la obtención de aceite, así como aquellos actores a quienes consultan en aspectos referidos a la Comercialización y gestión. A partir de la información recabada, se obtienen cuatro indicadores sintéticos de efectos de la implantación de una DOP en las almazaras adheridas, referidos a la adopción de innovaciones productivas y organizativas, a la calidad en producto y procesos, a las rentas de diferenciación y a las prácticas ambientales. Asimismo se generan las matrices bi-narias y valuadas para las redes de colaboración en la difusión del conocimiento y se calculan los indicadores particulares. Esto nos permite estudiar las características de las redes que se generan (tamaño, conectividad), el papel del CR en la gobernanza territorial y de otras instituciones del medio, así como identificar actores centrales y grupos en el proceso de difusión de conocimientos. Los resultados muestran que los SIAL pueden beneficiarse de la organización interprofesional y de cooperación interinstitucional a escala local que se producen tras la implantación de una DOP. Se desarrolla un proceso de articulación y un fuerte intercambio de conocimientos entre actores ligados al propio proceso de control de la calidad diferencial. Pero, junto con ello, se desarrollan actividades de formación y de promoción del patrimonio comarcal y se consolidan redes locales de innovación y colaboración mutua en distintas actividades, tanto entre actores de la propia cadena de producción, como entre éstos y las instituciones del medio. Estas actividades, junto con la presencia de un entramado institucional denso, permiten el desarrollo de una gobernanza territorial alrededor del sistema agroalimentario del aceite de oliva. ABSTRACT The implementation of geographical indications has different socio-economic, technological and environmental effects not only for the producers involved but also for the local agro food system (LAFS). Among the latter, we can highlight the collective organization of producers and the development of territorial governance through a series of tasks developed by the Regulatory Board (RB) as regards quality control and product marketing. The concept of territorial governance involves processes of collective organization in networks, where processes of multi-level coordination among agents, enterprises and local institutions take place within a context of asymmetry of information and numerous decision makers. The objective of this Doctoral Thesis is to contribute with methodological tools for the study of territorial governance in local agro food systems by constructing indicators (of quality, innovation, economic effects and environmental practices) and by analyzing networks of collaboration in terms of dissemination of technical, organizational and commercial innovation and knowledge in Comarca de Sierra Mágina. To achieve that objective, social network analysis is applied and synthetic indicators are elaborated to valorize the effects. Interviews to key actors and surveys to every oil mill in Comarca de Sierra Mágina are carried out, not only in those oil mills that host a label of quality but also in the ones that do not hold it. These interviews inquire about tasks and projects performed together with other oil mills and institutions and about actors or referents consulted in topics related to quality in olive production and oil extraction as well as in management and marketing. From all the information collected, four synthetic indicators of the effects of establishing Protected Designations of Origen (PDOs) in the associate oil mills are obtained, in terms of adoption of productive and organizational innovations, process and product quality, income differentiation and environmental practices. In the same way, binary and valorized matrixes are generated for those networks collaborating in the dissemination of knowledge and specific indicators are calculated. This allows to study networks (size, connectivity), the role of RB in territorial governance and other institutions involved and to identify main actors and groups in the process of knowledge dissemination. The results show that the LAFS can benefit from inter-professional organizations and inter- institutional cooperation at local levels by implementing PDOs. A process of articulation and strong exchange of knowledge is developed among those actors involved in controlling differential quality. But, at the same time, activities for the formation and promotion of the “comarca” patrimony are developed and local networks of innovation and mutual collaboration are built for different activities, not only among actors in the production process itself, but between these actors and local institutions as well. These tasks, together with the existence of a dense spatial entrepreneurial network, allow the development of territorial governance on the olive oil agro food system.

Diseño de un sistema networking audio para instalación audiovisual

Una vez presentada la tecnología de Networking audio (redes de datos, protocolos actuales, etc.) se realizará un diseño de la instalación del sistema de audio, en el que el punto de partida es la parte creativa de la actividad en dicha instalación: un juego en el que la comunicación auditiva es lo fundamental. La instalación se compondrá de una sala central, tres salas de grupos, tres salas de cabinas de actores y ocho salas de pasaje. Esta actividad tan particular hará plantearse configuraciones, equipamiento y formas de trabajar especiales que, mediante la tecnología de audio vía red de datos y el equipamiento auxiliar a esta red, podría realizarse de la una forma óptima cumpliendo con todos los objetivos de la actividad, tanto técnicos como relativos al juego. El libro se dividirá en dos partes: La primera parte consistirá en una explicación de lo que son las redes de datos y los aspectos básicos para entenderlas desde un punto de vista práctico: qué es Ethernet, los componentes de una red... Una vez explicada la terminología específica de redes, se expondrán los protocolos que se usan para transmitir audio profesional a día de hoy. En la segunda parte, se empezará presentando la actividad que se realizará en nuestra instalación: un juego de rol. A continuación se conocerá el flujo de señales existentes para después, poner en práctica lo aprendido en la primera parte: diseñaremos una instalación audiovisual mediante networking audio. Un sistema de estas características necesita además de dispositivos en red, sistemas convencionales de audio. Durante el diseño y debido a las necesidades tan específicas de la instalación, se verá que ha sido necesario pensar en sistemas especiales para hacer posible la actividad para la que ha sido ideada nuestra instalación. Los objetivos de este proyecto son, desarrollar los puntos que tendría que tener en cuenta un integrador que se proponga diseñar un sistema de audio networking para una instalación audiovisual para, a continuación, poner en práctica estos conocimientos con la exposición del diseño de una instalación en la que se llevará a cabo una actividad lúdica y de aprendizaje en la que una óptima transmisión de señal de audio a tiempo real, es lo fundamental. ABSTRACT. Once introduced the Networking technology (data networks, current protocols, etc.), the audio installation design is being done. In which the starting point is the creative part of the activity will be made: one game in which the auditory communication is fundamental. The installation will consist of a central room, three meeting groups, three actor cabins rooms and eight passage rooms. This particular activity will consider configurations, equipment and forms of special working that through audio technology via data network and auxiliary equipment to this network, it could be done in an optimal way to meet all the goals of the activity, both technical and relative to the game. The book is divided into two parts: The first part consists of an explanation of what the data networks and the basics to understand from a practical point of view: what Ethernet is, the network components... Once specific network terminology is explained, the current protocols used to transmit professional audio are being showed. In the second part, it is introducing the activity to be made in our installation: a game. Then, the flow of existing signals are being known, we practice what I learned in the first part: we will design an audiovisual installation by audio networking. A system like this besides networked devices, it needs conventional audio systems. During the design and due to the very specific needs of the installation, you will see that it was necessary to think of special systems for this special activity. The goals of this project are to develop the points that an system integrator would have to consider to design a system of networking audio for an audiovisual installation, then put this knowledge into practice with the installation design where it will take place a fun and learning activity in which an optimal transmission of audio signal in real time, is basic.

History and habit in the mobilization of ICT resources

Evidence demonstrates that the digital divide is deepening despite strategies mobilized worldwide to reduce it. In disadvantaged communities, beyond training and infrastructural issues, there often lies a range of cultural and historically formed relationships that affect people's adoption of ICTs. This article presents an analysis of local resident's engagement with their council's pilot project to develop a computer facility in their community center. We ask, to what extent can people in poor urban communities, once trained, be expected to volunteer to work on furthering community education and development in ICTs in their local area? Findings indicate four patterns of individual engagement with the computer project: reflexive, utilitarian, distributive, and nonparticipatory. It is argued that local people engaged with the intervention in historically patterned and locally distinctive ways that served immediate personal and pragmatic ends. They did not adopt the long-term strategic goals of the council or university.

A simple regional-scale model for forecasting sorghum yield across North-Eastern Australia

Sorghum is the main dryland summer crop in NE Australia and a number of agricultural businesses would benefit from an ability to forecast production likelihood at regional scale. In this study we sought to develop a simple agro-climatic modelling approach for predicting shire (statistical local area) sorghum yield. Actual shire yield data, available for the period 1983-1997 from the Australian Bureau of Statistics, were used to train the model. Shire yield was related to a water stress index (SI) that was derived from the agro-climatic model. The model involved a simple fallow and crop water balance that was driven by climate data available at recording stations within each shire. Parameters defining the soil water holding capacity, maximum number of sowings (MXNS) in any year, planting rainfall requirement, and critical period for stress during the crop cycle were optimised as part of the model fitting procedure. Cross-validated correlations (CVR) ranged from 0.5 to 0.9 at shire scale. When aggregated to regional and national scales, 78-84% of the annual variation in sorghum yield was explained. The model was used to examine trends in sorghum productivity and the approach to using it in an operational forecasting system was outlined. (c) 2005 Elsevier B.V. All rights reserved.

Effects of tourism development on the local poor people - Case study in Taibai Region China

In China, protected areas are one of the main destinations attracting tourists and homeland for many poor people living in and around them. Based on a case study, the paper focuses on correlation between tourism and poverty alleviation by tracing the cash flows to the local poor. It also reviews the social and environmental effects of tourism on local area. The case study is conducted in a group of protected areas in Qinling Mountain Region in Shaanxi, a western province in China. Qinling Mountain is one of the most important distribution zones for Giant Panda and some other endangered wildlife such as Golden Takin and Golden Monkey. The tourism development in the region is happening. Research indicates that there is 29.33%, of tourist expenditure is going to local households, directly or indirectly. Tourist spends US$7.11 (13.67%) in food and beverage, and US$6.39 (12.23%) in accommodation service, which are the greatest contributors to local households in terms of tourism benefits. Local households can get US$8.15 from food/beverage and accommodation sectors, taking 56.64% of total income from tourism. Generally, tourism development benefits all stakeholders. However, poor people get less benefit. The paper analyses the barriers for the poor to be involved in tourism development, and discusses the government roles, major issues in implementation of Sustainable Tourism-Eliminating Poverty (ST-EP) model. [ABSTRACT FROM AUTHOR]

Superstring: A scalable service discovery protocol for the wide-area pervasive environment

Arguably, the world has become one large pervasive computing environment. Our planet is growing a digital skin of a wide array of sensors, hand-held computers, mobile phones, laptops, web services and publicly accessible web-cams. Often, these devices and services are deployed in groups, forming small communities of interacting devices. Service discovery protocols allow processes executing on each device to discover services offered by other devices within the community. These communities can be linked together to form a wide-area pervasive environment, allowing processes in one p u p tu interact with services in another. However, the costs of communication and the protocols by which this communication is mediated in the wide-area differ from those of intra-group, or local-area, communication. Communication is an expensive operation for small, battery powered devices, but it is less expensive for servem and workstations, which have a constant power supply and 81'e connected to high bandwidth networks. This paper introduces Superstring, a peer to-peer service discovery protocol optimised fur use in the wide-area. Its goals are to minimise computation and memory overhead in the face of large numbers of resources. It achieves this memory and computation scalability by distributing the storage cost of service descriptions and the computation cost of queries over multiple resolvers.

Digital communication networks incorporating mobile data terminals

The use of digital communication systems is increasing very rapidly. This is due to lower system implementation cost compared to analogue transmission and at the same time, the ease with which several types of data sources (data, digitised speech and video, etc.) can be mixed. The emergence of packet broadcast techniques as an efficient type of multiplexing, especially with the use of contention random multiple access protocols, has led to a wide-spread application of these distributed access protocols in local area networks (LANs) and a further extension of them to radio and mobile radio communication applications. In this research, a proposal for a modified version of the distributed access contention protocol which uses the packet broadcast switching technique has been achieved. The carrier sense multiple access with collision avoidance (CSMA/CA) is found to be the most appropriate protocol which has the ability to satisfy equally the operational requirements for local area networks as well as for radio and mobile radio applications. The suggested version of the protocol is designed in a way in which all desirable features of its precedents is maintained. However, all the shortcomings are eliminated and additional features have been added to strengthen its ability to work with radio and mobile radio channels. Operational performance evaluation of the protocol has been carried out for the two types of non-persistent and slotted non-persistent, through mathematical and simulation modelling of the protocol. The results obtained from the two modelling procedures validate the accuracy of both methods, which compares favourably with its precedent protocol CSMA/CD (with collision detection). A further extension of the protocol operation has been suggested to operate with multichannel systems. Two multichannel systems based on the CSMA/CA protocol for medium access are therefore proposed. These are; the dynamic multichannel system, which is based on two types of channel selection, the random choice (RC) and the idle choice (IC), and the sequential multichannel system. The latter has been proposed in order to supress the effect of the hidden terminal, which always represents a major problem with the usage of the contention random multiple access protocols with radio and mobile radio channels. Verification of their operation performance evaluation has been carried out using mathematical modelling for the dynamic system. However, simulation modelling has been chosen for the sequential system. Both systems are found to improve system operation and fault tolerance when compared to single channel operation.