Avaliação preliminar da viabilidade de produção in vitro de um isolado brasileiro de baculovírus Spodoptera frugiperda MNPV

In vivo production of viral biopesticides is the major source of viral insecticides currently in the marketplace. However, this system presents limitations during production scale-up. For the Spodoptera frugiperda nucleopolyhedrovirus (SfMNPV), the insect used for replication has cannibalistic characteristics, thus production is even more difficult. Insect cells are commonly used for in vitro baculovirus production. Most of these cell lines are derived from Lepidoptera species. The Sf21 cell line is derived from Spodoptera frugiperda caterpillar ovarian tissue, and its clonal isolate Sf9 has been used for biopesticide production due to its ease of growth in suspension cultures. In this work, the in vitro production capabilities of a Brazilian SfMNPV isolate obtained from cornfields was evaluated. Comparison of polyhedra production was carried out using both Sf21 and Sf9 cells, based on volumetric and specific yields. Both cell lines were cultivated in Hyclone medium supplemented with different fetal bovine serum concentrations (2,5 and 5%). The best results were obtained using Sf9 cells supplemented with 5% serum. These results were further confirmed quantitively through kinetic parameter estimation for both cells lines and different serum concentrations. After seven successive passages, this system still presented high specific polyhedra production

Obtenção de Propriedades Físico-Químicas de Misturas de Hidrocarbonetos em Baixa e Alta Pressão Visando a Caracterização e a Modelagem

The composition of petroleum may change from well to well and its resulting characteristics influence significantly the refine products. Therefore, it is important to characterize the oil in order to know its properties and send it adequately for processing. Since petroleum is a multicomponent mixture, the use of synthetic mixtures that are representative of oil fractions provides a better understand of the real mixture behavior. One way for characterization is usually obtained through correlation of physico-chemical properties of easy measurement, such as density, specific gravity, viscosity, and refractive index. In this work new measurements were obtained for density, specific gravity, viscosity, and refractive index of the following binary mixtures: n-heptane + hexadecane, cyclohexane + hexadecane, and benzene + hexadecane. These measurements were accomplished at low pressure and temperatures in the range 288.15 K to 310.95 K. These data were applied in the development of a new method of oil characterization. Furthermore, a series of measurements of density at high pressure and temperature of the binary mixture cyclohexane + n-hexadecane were performed. The ranges of pressure and temperature were 6.895 to 62.053 MPa and 318.15 to 413.15 K, respectively. Based on these experimental data of compressed liquid mixtures, a thermodynamic modeling was proposed using the Peng-Robinson equation of state (EOS). The EOS was modified with scaling of volume and a relatively reduced number of parameters were employed. The results were satisfactory demonstrating accuracy not only for density data, but also for isobaric thermal expansion and isothermal compressibility coefficients. This thesis aims to contribute in a scientific manner to the technological problem of refining heavy fractions of oil. This problem was treated in two steps, i.e., characterization and search of the processes that can produce streams with economical interest, such as solvent extraction at high pressure and temperature. In order to determine phase equilibrium data in these conditions, conceptual projects of two new experimental apparatus were developed. These devices consist of cells of variable volume together with a analytical static device. Therefore, this thesis contributed with the subject of characterization of hydrocarbons mixtures and with development of equilibrium cells operating at high pressure and temperature. These contributions are focused on the technological problem of refining heavy oil fractions

Caracterização da área de Ensino de Biologia e Ciências no mestrado profissional da UFRN a partir das dissertações

The deployment of master professionals in Mathematics and Science Teaching by CAPES provided an interesting perspective, involving institutional incentive to upgrade teacher training in this modality. In this sense, the objective was to map the profile of the candidates in the Graduate School of Natural Sciences and Mathematics UFRN (PPGECNM), develop a database with specific descriptors for dissertations and research the group creation biology research and dissertations produced by graduate students in the Master course. This thesis has three threads, where the first is entitled: "The teaching of science as part of research: emergency, improvement and current reflections", giving a brief description of the creation of graduate studies and the emergence of Brazil in Science education. The second topic: "Professional Masters in Teaching of Natural Sciences and Mathematics-UFRN: candidate profile the biological ', shows the general characteristics of PPGECNM-UFRN and who are the candidates seeking the biological area of the Graduate Program. The third topic. "The construction and consolidation of the research group in biology education in PPGECNM-UFRN", a survey was made of data on the creation of the research group in biology education from the analysis of academic productions of teachers and masters graduates this Masters course, for those involved, some additional interviews about the experience in training in biology education. Data used in these investigations related to these students correspond to the technical product to be used in other studies profile teachers /dissertations from the PPGECNM / UFRN. Research shows that: the existence of a larger number of postgraduate courses in the field of Science Education provides greater productivity in academic research on the subject, the emergence of a research group on education in biology, tied to a post degree in education, is an attraction to strengthen lines of research in science education by teachers researchers in other disciplines, the candidates seeking permanent area for research in biology education signals the importance of this investment because if shows the need to search for the continuing education of practicing teachers, demands with interests in investigations from real problems from school

O Modelo de Ising inomogêneo: uma interrupção contínua entre as redes quadrada e triangular.

The ferromagnetic and antiferromagnetic Ising model on a two dimensional inhomogeneous lattice characterized by two exchange constants (J1 and J2) is investigated. The lattice allows, in a continuous manner, the interpolation between the uniforme square (J2 = 0) and triangular (J2 = J1) lattices. By performing Monte Carlo simulation using the sequential Metropolis algorithm, we calculate the magnetization and the magnetic susceptibility on lattices of differents sizes. Applying the finite size scaling method through a data colappse, we obtained the critical temperatures as well as the critical exponents of the model for several values of the parameter α = J2 J1 in the [0, 1] range. The ferromagnetic case shows a linear increasing behavior of the critical temperature Tc for increasing values of α. Inwhich concerns the antiferromagnetic system, we observe a linear (decreasing) behavior of Tc, only for small values of α; in the range [0.6, 1], where frustrations effects are more pronunciated, the critical temperature Tc decays more quickly, possibly in a non-linear way, to the limiting value Tc = 0, cor-responding to the homogeneous fully frustrated antiferromagnetic triangular case.

A loucura interrompida nas malhas da subjetividade manicomial

Psychiatric reform occurring in Brazil has progressed significantly during the last two decades, both in the transformation of the help structure and in the treatment of madness. At the same time a paralell movement is observed marked by the maintenance of the hospital centered or psychiatric ward ideology present not only in the psychiatric institutions but also in the substitute services in the cities and , above all, in the ways of contemporary subjectivation. We affirm that the idea of deinstitutionalization is intertwined with capitalistic agent both from the epistomological, assistance, and legal aspect as from the cultural one. This work aims mainly to discuss madness and subjectivity from the ethic esthetic-political perspective, specially the wishes of the psychiatric hospital, which we inhabit and who inhibits our interactions and our desired and creative productivity. We do also want to access the invisible threads that capture and modify madness, which make our cities a means for the production of pathologies, and those that, on the contrary, insinuate a process of resistance, facilitating life and health

Método da continuação aplicado na análise de contingência de linhas de transmissão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos do sistema de condução, poda e irrigação na produção do maracujazeiro doce

O maracujá é um fruto de ampla aceitação dada a qualidade de seu suco, sendo o maracujazeiro-amarelo o mais cultivado no Brasil. Nos últimos anos, cresceu o interesse pelo maracujazeiro doce, em função de alcançar bons preços no mercado in natura. Assim, informações técnicas por parte dos agricultores têm se intensificado. Este trabalho teve como objetivo avaliar a produção e a qualidade dos frutos desta espécie, cultivada sob poda e irrigação em diferentes sistemas de condução. O experimento foi conduzido no delineamento em faixas, contendo 12 tratamentos (plantas com e sem irrigação, com e sem poda e três sistemas de condução) e 3 repetições. Com base nos resultados obtidos, pode-se concluir: a) o sistema de condução e a poda não afetaram o tamanho dos frutos; b) o sistema de condução não afetou a massa dos frutos, porém as plantas podadas produziram frutos com maior massa; c) a poda diminuiu o número de frutos por planta e o rendimento por área, nos sistemas de condução em T normal e espaldeira vertical com um fio de arame; d) a poda não alterou o número de frutos por planta e o rendimento por área, no sistema de condução em espaldeira vertical com dois fios de arame.

Um estudo algorítmico da programação da intervenção de sondas de produção

This work approaches the Scheduling Workover Rigs Problem (SWRP) to maintain the wells of an oil field, although difficult to resolve, is extremely important economical, technical and environmental. A mathematical formulation of this problem is presented, where an algorithmic approach was developed. The problem can be considered to find the best scheduling service to the wells by the workover rigs, taking into account the minimization of the composition related to the costs of the workover rigs and the total loss of oil suffered by the wells. This problem is similar to the Vehicle Routing Problem (VRP), which is classified as belonging to the NP-hard class. The goal of this research is to develop an algorithmic approach to solve the SWRP, using the fundamentals of metaheuristics like Memetic Algorithm and GRASP. Instances are generated for the tests to analyze the computational performance of the approaches mentioned above, using data that are close to reality. Thereafter, is performed a comparison of performance and quality of the results obtained by each one of techniques used

A representação social de educação tecnológica de docentes da Rede Federal de Educação Profissional e Tecnológica: CEFETs do Rio Grande do Norte

The aim of this study was to investigate the social representation of technological education teachers at the Federal Technological Education Network. The survey was conducted from 2007 to 2010, and the respondents were 275 teachers, 135 of the Federal Center for Technological Education (CEFET in portuguese) in the state of Amazonas, in Manaus unit headquarters; 140 of the CEFET in the state of Rio Grande do Norte, a unit based in Natal. We adopt the concept of technological education as the top level of professional education, that is to say, the undergraduate programs of short duration called technological courses. The Federal Technological Education Network gathers hundreds of related institutions, coordinated and supervised by the Office of Vocational and Technological Education of the Ministry of Education. Although many of these institutions offer courses in technology education, no research addressing this subject from the perspective of Social Representations Theory (SRT) was found in the literature. We seek to unravel the social representation of technological education of the teachers by adopting the procedural approach of SRT. This is a qualitative approach, focusing on significant aspects of the representative activity and the formation mechanisms of the representation. Therefore, we search the socio-genesis of the representation in the articulations between discourses, social institutions and practices. We initiated the research through applying critical reading and an analytical perspective on the historical and regulatory documents of technological education in Brazil, from the early twentieth century to the present day. We adopt the Procedure for Multiple Classifications (PMC) from the Free Words Association Technique (FWAT) to access the elements of representational content. For the analysis of the data obtained with FWAT and selection of major words / phrases pertinent to the semantic field of education technology, we used Hamlet II software. For the data analysis of PMC and Free Classification (FC) we used the SPSS ® (Statistical Package for the Social Sciences) version 17.0 and used the method of multidimensional scaling - Multidimensional scaling - (MDS). The output from the central MDS takes the form of a set of scatterplots - "perceptual maps" - of which the points are the elements of the representational content. For the FC data analysis we used the Scalogram Multidimensional Analysis (SMA) - which makes use of the original data in its raw form and allows categorical data to be interpreted in the map as measures of (di)similarity. In order to help with the understanding of the settings of the perceptual maps of FC, we used the Content Analysis of the discourse fragments of the teachers interviewed. The results confirm our initial hypothesis regarding the presence of a single plot among the socio-cognitive study subjects, which is the basis for a social representation of technological education in line with the historic assumption of the dichotomy between mental and manual labor. In spite of the three merging representational elements of the representational content, the perceptual maps compiled from the MSA statistics corroborates the dichotomy, with the exception of the map relating to the subgroup of teachers belonging to the humanities

Vivências ludopoiéticas no jogo de areia: a tatilidade na autoformação humanescente

This study presents the ludopoietic experiences in Sandplay and the expression of tactility in humanescente self-training of future teachers of geography. The overall objective was to analyze and interpret as the tactility in the ludopoietic experiences with Sandplay facilitates the sentipensar and boosts the humanescent self-training. The qualitative research approach follows the principles of existential research-action into the etnofenomenologic perspective, that considers studies of the ethnography and the phenomenology with ethnomethodology. In this study we used the sedimentary rock called sandstone and your mineral grains as cognitive operator to stimulate the discussions of the ludopoietic experiences in Sandplay. The members of research were students of the Geography degree of IFRN. To achieve the research objectives were organized experiential meetings and virtual meetings. The ludopoietic experiences in Sandplay revealed the impact of tactility to humanescente self-training, indicating the importance of touch for apprehend and experience the world with beauty, joy and tenderness. These experiences showed the ludopoietic system properties, the threads of embodiment and the meaning of the sentipensar of tactility as a phenomenon that drives the humanescent self-training, evidenced by etnofenomenologie. Data were obtained through Sandplay, sensitive listening, experiential diary, photographic and movie records. In the process of data analysis were revealed the of etnofenomenological principles of experientiality indiciality, reflexivity, self-organizability, filiability, archetypality and humanescencialidade. Through the tactility, the Sandplay favors the awareness of the condition of being, takes life stories, providing the construction of knowledge in a meaningful and contextual way

Excitações elementares em super-redes quasiperiódicas com simetria espelho

In this thesis, we investigated the magnonic and photonic structures that exhibit the so-called deterministic disorder. Speci cally, we studied the effects of the quasiperiodicity, associated with an internal structural symmetry, called mirror symmetry, on the spectra of photonics and magnonics multilayer. The quasiperiodicity is introduced when stacked layers following the so-called substitutional sequences. The three sequences used here were the Fibonacci sequence, Thue-Morse and double-period, all with mirror symmetry. Aiming to study the propagation of light waves in multilayer photonic, and spin waves propagation in multilayer magnonic, we use a theoretical model based on transfer matrix treatment. For the propagation of light waves, we present numerical results that show that the quasiperiodicity associated with a mirror symmetry greatly increases the intensity of transmission and the transmission spectra exhibit a pro le self-similar. The return map plotted for this system show that the presence of internal symmetry does not alter the pattern of Fibonacci maps when compared with the case without symmetry. But when comparing the maps of Thue-Morse and double-time sequences with their case without the symmetry mirror, is evident the change in the pro le of the maps. For magnetic multilayers, we work with two di erent systems, multilayer composed of a metamagnetic material and a non-magnetic material, and multilayers composed of two cubic Heisenberg ferromagnets. In the rst case, our calculations are carried out in the magnetostatic regime and calculate the dispersion relation of spin waves for the metamgnetic material considered FeBr2. We show the e ect of mirror symmetry in the spectra of spin waves, and made the analysis of the location of bulk bands and the scaling laws between the full width of the bands allowed and the number of layers of unit cell. Finally, we calculate the transmission spectra of spin waves in quasiperiodic multilayers consisting of Heisenberg ferromagnets. The transmission spectra exhibit self-similar patterns, with regions of scaling well-de ned in frequency and the return maps indicates only dependence of the particular sequence used in the construction of the multilayer

Estimativa de expoentes críticos em Percolação

In Percolation Theory, functions like the probability that a given site belongs to the infinite cluster, average size of clusters, etc. are described through power laws and critical exponents. This dissertation uses a method called Finite Size Scaling to provide a estimative of those exponents. The dissertation is divided in four parts. The first one briefly presents the main results for Site Percolation Theory for d = 2 dimension. Besides, some important quantities for the determination of the critical exponents and for the phase transistions understanding are defined. The second shows an introduction to the fractal concept, dimension and classification. Concluded the base of our study, in the third part the Scale Theory is mentioned, wich relates critical exponents and the quantities described in Chapter 2. In the last part, through the Finite Size Scaling method, we determine the critical exponents fi and. Based on them, we used the previous Chapter scale relations in order to determine the remaining critical exponents

Passivity Versus Unilateral Angular Misfit: Evaluation of Stress Distribution on Implant-Supported Single Crowns: Three-Dimensional Finite Element Analysis

The aim of this study was to evaluate the effect of unilateral angular misfit of 100 Km on stress distribution of implant-supported single crowns with ceramic veneering and gold framework by three-dimensional finite element analysis. Two three-dimensional models representing a maxillary section of premolar region were constructed: group 1 (control)-crown completely adapted to the implant and group 2-crown with unilateral angular misfit of 100 Km. A vertical force of 100 N was applied on 2 centric points of the crown. The von Mises stress was used as an analysis criterion. The stress values and distribution in the main maps (204.4 MPa for group 1 and 205.0 MPa for group 2) and in the other structures (aesthetic veneering, framework, retention screw, implant, and bone tissue) were similar for both groups. The highest stress values were observed between the first and second threads of the retention screw. Considering the bone tissue, the highest stress values were exhibited in the peri-implant cortical bone. The unilateral angular misfit of 100 Km did not influence the stress distribution on the implant-supported prosthesis under static loading.

Evaluation of the RB-RB/LB-LB mnemonic rule for recording optimally projected intraoral images of dental implants: an in vitro study

Objective: The aim of this study was to evaluate a simple mnemonic rule (the RB-RB/LB-LB rule) for recording intra-oral radiographs with optimal projection for the control of dental implants.Methods: 30 third-year dental students received a short lesson in the RB-RB/LB-LB mnemonic rule. The rule is as follows: if right blur then raise beam (RB-RB), i.e. if implant threads are blurred at the right side of the implant, the X-ray beam direction must be raised towards the ceiling to obtain sharp threads on both implant sides; if left blur then lower beam (LB-LB), i.e. if implant threads are blurred at the left side of the implant, the X-ray beam direction must be lowered towards the floor to obtain sharp threads on both implant sides. Intra-oral radiographs of four screw-type implants placed with different inclination in a Frasaco upper or lower jaw dental model (Frasaco GmbH, Tettnang, Germany) were recorded. The students were unaware of the inclination of the implants and were instructed to re-expose each implant, implementing the mnemonic rule, until an image of the implant with acceptable quality (subjectively judged by the instructor) was obtained. Subsequently, each radiograph was blindly assessed with respect to sharpness of the implant threads and assigned to one of four quality categories: (1) perfect, (2) not perfect, but clinically acceptable, (3) not acceptable and (4) hopeless.Results: For all implants, from one non-perfect exposure to the following, a higher score was obtained in 64% of the cases, 28% received the same score and 8% obtained a lower score. Only a small variation was observed among exposures of implants with different inclination. on average, two exposures per implant (range: one to eight exposures) were needed to obtain a clinically acceptable image.Conclusion: The RB-RB/LB-LB mnemonic rule for recording intra-oral radiographs of dental implants with a correct projection was easy to implement by inexperienced examiners. Dentomaxillofacial Radiology (2012) 41, 298-304. doi: 10.1259/dmfr/20861598

Implant image quality in dental radiographs recorded using a customized imaging guide or a standard film holder

Objective: To compare a customized imaging guide and a standard film holder for obtaining optimally projected intraoral radiographs of dental implants.Material and methods: Intraoral radiographs of four screw-type implants with different inclination placed in an upper or lower dental phantom model were recorded by 32 groups of examiners after a short instruction in the use of the RB-RB/LB-LB mnemonic rule. Half of the examiners recorded the images using a standard film holder and the other half used a customized imaging guide. Each radiograph was assessed under blinded conditions with regard to rendering of the implant threads and was assigned to one of four quality categories: (1) perfect, (2) not perfect, but clinically acceptable, (3) not acceptable, and (4) hopeless.Results: For the upper jaw, the same number of exposures per implant were made to achieve an acceptable image (P = 0.86) by the standard film holder method (median = 2) and the imaging guide method (median = 2). For the lower jaw, medians for the imaging guide method and the film holder method were 1 and 2, respectively (P = 0.004). For the imaging guide method, the first exposure was rated as perfect/acceptable in 62% of the cases and for the film holder method in 41% of the cases (P = 0.013). After <= 2 exposures, 78% (imaging guide method) and 69% (film holder method) of the implant images were perfect/acceptable (P=0.23). The implant inclination did not have a major influence on the outcomes.Conclusion: Perfect or acceptable images were achieved after two exposures with the same frequency either using a customized imaging guide method or a standard film holder method. However, the use of a customized imaging guide method was overall significantly superior to a standard film holder method in terms of obtaining perfect or acceptable images with only one exposure.