Estudo das características físico-químicas e funcionalidade de bagaços de frutas tropicais desidratados em leito de jorro

Fruits are rich sources of bioactive compounds, including phenolic compounds. Tropical fruit cultivation is an important productive segment in Brazilian Northeast. Its industrialization generates solid wastes as co-products, with potential environmental impact. Considering the recognized bioactive content of fruit and its derivatives, this research has the objective of investigating acerola (Malpighia glabra L.), cajá-umbu (Spondia ssp), jambolan (Syzygium cumini) and pitanga (Eugenia uniflora) dried wastes obtained by spouted bed drier. It was analyzed the physical-chemical composition, solubility and microphotographic aspect of these dried wastes. Besides this, it was also evaluated the bioactive content, antioxidant activity and inhibitory activity against aamylase and a-glycosidase enzymes of water and ethanol (70%, 80% e 100% v/v) extracts prepared from fruit dried wastes, as well as their possible correlations. The dried fruit wastes showed high phenolic (606.04 to 3074.6 mg GAE eq/100 g sample), anthocyanin (478.7 mg/100 g for jambolan) and ascorbic acid (2748.03 mg/100 g for acerola) contents, as well as high antioxidant DPPH activity (14.27 a 36.30 mg Trolox eq/g sample). The extracts exhibited moderate to high a-amylase inhibition (23.97% a 76.58%) and high α-glycosidase inhibition, which 99.32% peak was reached for ethanol 70% pitanga extracts. It was also observed great positive correlation between phenolic content and DPPH activity (0.97 for acerola), anthocyanin (0.95 for jambolan) and α- glycosidase inhibition (0.98 for acerola). The α-glycosidase inhibition also correlated well with the antioxidant activity for all fruit extracts. The results show that these dried fruit wastes are valuable material for further applications as functional ingredients

Avaliacao de dados de secagem de suspensoes de polpas de frutas em leito de jorro com alimentacao intermitente

The objective of this work was the development and improvement of the mathematical models based on mass and heat balances, representing the drying transient process fruit pulp in spouted bed dryer with intermittent feeding. Mass and energy balance for drying, represented by a system of differential equations, were developed in Fortran language and adapted to the condition of intermittent feeding and mass accumulation. Were used the DASSL routine (Differential Algebraic System Solver) for solving the differential equation system and used a heuristic optimization algorithm in parameter estimation, the Particle Swarm algorithm. From the experimental data food drying, the differential models were used to determine the quantity of water and the drying air temperature at the exit of a spouted bed and accumulated mass of powder in the dryer. The models were validated using the experimental data of drying whose operating conditions, air temperature, flow rate and time intermittency, varied within the limits studied. In reviewing the results predicted, it was found that these models represent the experimental data of the kinetics of production and accumulation of powder and humidity and air temperature at the outlet of the dryer

Medida indireta da clorofila e sua relação com o manejo da adubação nitrogenada em plantas cítricas fertirrigadas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nutrientes na seiva de plantas cítricas fertirrigadas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Análises físico-químicas de polpas de frutas e avaliação dos seus padrões de identidade e qualidade

The pulps are products that add economic value enjoy the fruits of the surplus productions of the same. Have good market acceptance because of its practicality and diversity of flavors available year round. In order to assess the quality of the fruit pulp through the physical and chemical parameters and the characteristics of manufacturing industry, we analyzed 36 samples of frozen fruit pulp of three brands marketed in RIO Grande do Norte, 14 brand A, 12 of 10 brand B and brand C, which corresponded to 14 different flavors, of which 10 have identity Standards and Quality (ISQ S) established by the Ministério da Agricultura, Pecuária e Abastecimento (MAPA), totaling 27 samples with ISQ s. We conducted the following physicalchemical analyzes on samples of fruit pulp: Total solids, total soluble solids, pH, titratable acidity, total sugars and the determination of ascorbic acid. The percentage of failure for each parameter evaluated was 37, 04% in total soluble solids, 22,22% for total solids and titratable acidity, 7,40% in relation to pH. The total sugars were within the requirements demanded by the MAPA and ascorbic acid content, determined only in the pulp of acerola and cashew, presented a non compliance in the pulp of brand B. The percentage of failures of the pulps with ISQ S was 59% with brand A, B and C accounted for 3,70%, 33,33% and 22,22% respectively. The pulps which have no established atandards such as pineapple pulp, showed similar values between brands and literature data unlike the pulp of plum, jackfruit and tamarind which diverged greatly in parameters such as total solids and total soluble solids. The study demonstrates the need for greater quality control by the producers with respect to raw materials, processing, packing, stored and the importance of ISQ S to establish the flavors have not yet covered by existing legislation, but already highly commercialized

Uso de câmara úmida em enxertia convencional de maracujazeiro-amarelo sobre três porta-enxertos

A propagação do maracujazeiro através da enxertia poderá ser a solução para o controle de doenças do sistema radicular. Assim, com o objetivo de avaliar o desenvolvimento e a sobrevivência de plantas enxertadas de maracujazeiro-amarelo (Passiflora edulis Sims) em três porta-enxertos, utilizando-se de câmara úmida, instalou-se este experimento em um viveiro de mudas no município de Adamantina-SP, no período de dezembro de 2005 a abril de 2006. O delineamento experimental utilizado foi em blocos ao acaso, em esquema fatorial 3 x 2, com quatro repetições e 10 plantas/parcela. Os fatores avaliados foram três porta-enxertos (Passiflora edulis, P. alata e P. gibertii)em dois ambientes (com e sem câmara úmida). Foi utilizada a enxertia convencional pelo método de garfagem tipo fenda cheia. Avaliaram-se a sobrevivência e a altura dos enxertos, o diâmetro do caule do porta-enxerto e do enxerto, o número de folhas e a fitomassa seca da parte aérea e das raízes. Verificaram-se melhores resultados com os porta-enxertos P. edulis e P. gibertii, superiores ao P. alata em todas as variáveis estudadas. Os maiores índices de sobrevivência foram observados em P. edulis e P. gibertii, com 100% e 98,8%, respectivamente. Apesar de o P. alata ter-se mostrado inferior, é viável o uso deste material como porta-enxerto para o maracujazeiro-amarelo. O uso da câmara úmida favoreceu o pegamento dos enxertos em P. alata.

Dinâmica populacional e incidência de moscas-das-frutas e parasitoides em cultivares de pessegueiros (Prunus Persica L. Batsch) no município de presidente prudente-sp

Esta pesquisa teve como objetivos avaliar a dinâmica populacional e registrar a diversidade de moscas-das-frutas (Diptera: Tephritoidea) em cultivares de pessegueiro Tropical, Talismã, Aurora 2, Aurora 1, Dourado 2 e Doçura 2, enxertadas sobre os porta-enxertos 'Okinawa' e Umê, em Presidente Prudente-SP. Foram realizadas as correlações da dinâmica populacional com a temperatura e a precipitação, e também a infestação com as características químicas dos frutos, Sólidos Solúveis e Acidez Titulável. No período de julho de 2004 a dezembro de 2006, a dinâmica populacional de moscas-das-frutas foi obtida através de coletas semanais de moscas-das-frutas em armadilhas McPhail, e a incidência foi determinada através da coleta de 30 frutos/planta/cultivar. O delineamento estatístico adotado foi o inteiramente casualizado, com cinco repetições. Ceratitis capitata foi predominante nas cultivares de pessegueiros estudadas. Não foi observada correlação significativa entre população de moscas-das-frutas e as variáveis de temperatura e precipitação, e sólidos solúveis e ácidez titulável. Entre as cultivares de pêssego, Aurora 2 apresentou maior infestação por C. capitata, da ordem de 22 e 23% nos anos 2004 e 2006, respectivamente. Também foi registrada a incidência de Neosilba spp. em frutos de pêssego. Doryctobracon areolatus (Braconidae), Tetrastichus giffardianus (Eulophidae) e Pachycrepoideus vindemmiae (Pteromalidae) foram recuperados de pupários de Tephritidae.

Uso de câmara úmida em enxertia hipocotiledonar de maracujazeiro-amarelo sobre três porta-enxertos

Com o objetivo de avaliar o desenvolvimento e a sobrevivência de plantas de maracujazeiro-amarelo (Passiflora edulis Sims) enxertadas sobre três porta-enxertos com uso de câmara úmida, instalou-se este experimento em um viveiro de mudas no município de Adamantina - SP, no período de dezembro de 2005 a abril de 2006. O delineamento foi em blocos ao acaso, em esquema fatorial 3 x 2, com quatro repetições. Os fatores avaliados foram três porta-enxertos (Passiflora edulis, P. alata e P. gibertii) em dois ambientes (com e sem câmara úmida). Foi utilizada a enxertia hipocotiledonar pelo método de garfagem tipo fenda cheia. Avaliaram-se a altura das plantas, o diâmetro do caule do porta-enxerto e do enxerto, o número de folhas, o comprimento do entrenó, a porcentagem de sobrevivência das plantas e a fitomassa seca da parte aérea e das raízes. Observou-se que o método de enxertia utilizado foi bem-sucedido para as três espécies de porta-enxertos estudadas. P. gibertii e P. edulis proporcionaram melhores resultados como porta-enxertos. O porta-enxerto P. alata proporcionou menor altura de planta, menor diâmetro do enxerto e do porta-enxerto e menor índice de sobrevivência. O uso da câmara úmida não favoreceu nenhuma das variáveis estudadas.

Características físicas e químicas de frutos de maracujazeiro-amarelo enxertado em três porta-enxertos

O mercado de frutas frescas do maracujá-amarelo valoriza a qualidade interna e externa dos frutos. Assim, este trabalho teve o objetivo de avaliar o efeito do porta-enxerto e do tipo de enxertia na qualidade dos frutos de maracujazeiro-amarelo (Passiflora edulis Sims). O experimento foi conduzido no município de Adamantina-SP, no período de abril de 2006 a junho de 2007, adotando-se o delineamento em blocos ao acaso, em esquema fatorial 3 x 2 + 1 tratamento adicional, com quatro repetições. Os porta-enxertos avaliados foram: P. edulis (maracujá-amarelo), P. alata (maracujá-doce) e P. gibertii (maracujá-giberti), em dois tipos de enxertia: hipocotiledonar e convencional por garfagem tipo fenda cheia e um tratamento adicional, sem enxertia. Utilizou-se como copa o maracujazeiro-amarelo (Passiflora edulis Sims). Avaliaram-se o comprimento, o diâmetro, a massa fresca e a classificação dos frutos no período de novembro de 2006 a abril de 2007, a massa e a espessura da casca dos frutos, o rendimento do suco, o teor de sólidos solúveis totais (SST), a acidez total titulável (ATT) e o ratio (SST/ATT) dos frutos no mês de dezembro de 2006. O diâmetro e a massa fresca de frutos obtidos de plantas enxertadas sobre P. gibertii foram inferiores em relação aos de plantas pé-franco e aos de plantas enxertadas sobre P. alata. Os maiores comprimentos de frutos foram encontrados em plantas não enxertadas. Os porta-enxertos utilizados não influenciaram no teor de SST, na ATT e no ratio. O método de enxertia não interfere no diâmetro, no comprimento, na massa fresca dos frutos, na massa e na espessura da casca, no rendimento do suco e no teor de SST.

Enxertia de mesa de Passiflora edulis Sims f. flavicarpa Deg. sobre Passiflora alata Curtis, em ambiente de nebulização intermitente

O maracujazeiro é uma cultura típica de países tropicais, sendo estes responsáveis por cerca de 90% da produção mundial. A propagação vegetativa do maracujazeiro permite a obtenção de pomares uniformes, bem como de porta-enxertos altamente produtivos ou resistentes a doenças. O experimento teve como objetivo verificar a viabilidade da enxertia de mesa do maracujazeiro-amarelo (Passiflora edulis Sims f. flavicarpa Deg.) sobre o maracujazeiro-doce (Passiflora alata Curtis), conduzido em telado com 50% de sombreamento, dotado de sistema de nebulização intermitente. Foi conduzido de agosto de 2001 a maio de 2002, na Fazenda de Ensino e Pesquisa da UNESP - Câmpus de Ilha Solteira, localizada no município de Selvíria - MS. O delineamento experimental utilizado foi blocos ao acaso, esquema de parcelas subdivididas no tempo, totalizando quatro tratamentos (T1 - enxertia tipo fenda cheia, com o garfo do ponteiro dos ramos; T2 - enxertia tipo inglês simples, com o garfo do ponteiro dos ramos; T3 - enxertia tipo fenda cheia, com o garfo da parte mediana dos ramos; T4 - enxertia tipo inglês simples, com o garfo da parte mediana dos ramos), cinco repetições e 25 estacas enxertadas por parcela. Foram avaliados: a) porcentagem de sobrevivência das estacas enxertadas; b) porcentagem de estacas enxertadas enraizadas; c) número de brotos emitidos por estaca enxertada; d) número de folhas emitidas por estaca enxertada; e) massa da matéria seca da raiz, caule, folha e planta. Com base nos resultados, pode-se concluir que: a técnica de enxertia de mesa, quando aplicada ao maracujazeiro, mostrou-se viável, com excelente porcentagem de sobrevivência e enraizamento.

Influência da irrigação com água enriquecida com dióxido de carbono e da enxertia sobre o estado nutricional de plantas de pepino

Com o objetivo de avaliar o efeito da enxertia e do enriquecimento da água de irrigação com dióxido de carbono sobre o teor de N, P, K, Ca, Mg, S, Mn e Zn na parte aérea de plantas de pepino tipo japonês cultivados em ambiente protegido, foram conduzidos experimentos em duas épocas do ano. O delineamento experimental foi em blocos ao acaso com quatro tratamentos e quatro repetições. Os tratamentos foram plantas de pepino enxertadas e não enxertadas, irrigadas com água comum ou enriquecida com CO2, em uma concentração de 1 no primeiro semestre e 0,25 no segundo semestre. No final do ciclo da cultura, o CO2, influenciou unicamente no primeiro semestre os teores de K, Ca, Mg, S e Zn; enquanto o teor de N só alterou no segundo semestre. Não houve padrão de resposta consistente da enxertia sobre os teores de N, P, Mg e Zn; porém, plantas enxertadas apresentam maior teor de K e menor teor de Mg, S e Ca na sua parte aérea, ao final do ciclo da cultura, podendo estar relacionado com os sintomas de deficiências nutricionais observados em plantas de pepino enxertadas.

Produção de tomateiro, híbrido momotaro, em função do estádio das mudas e da enxertia

This work was carried out in a protected environment at São Paulo State University (UNESP) Sao Manuel Experimental Farm, College of Agronomical Sciences, Sao Manuel Municipality, São Paulo State, Brazil. The local soil was red-yellow sandy-phase latosol. The following development stages for transplanting were evaluated: seedlings presenting 5 to 6 definitive leaves, in full flowering and beginning of fruiting. Momotaro T-93 hybrid tomato (Lycopersicon esculentum Mill.) was grown on two rootstocks, the hybrids Anchor T and Kaguemusha, and in non-grafted ones. Evaluations included leaf area, seedling length, seedling dry matter at the moment of the transplant, total number of leaves per plant, fresh and dry matter of leaves below the third inflorescence, fruit classification according to diameter, and total fruit production until the eighth bunch. Non-grafted plants transplanted when they presented 5 to 6 definitive leaves had the highest mean fruit production and diameter. As regards grafted plants, no difference was detected concerning productivity and final quality when seedlings were in the stages from 5 to 6 definitive leaves until full flowering, and the rootstock Anchor T presented the best development.

Caracterização dos óleos de algumas sementes de frutas como aproveitamento de resíduos industriais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)