Economic efficiency analysis of different strategies to control post-weaning multi-systemic wasting syndrome and porcine circovirus type 2 subclinical infection in 3-weekly batch system farms.

The study assessed the economic efficiency of different strategies for the control of post-weaning multi-systemic wasting syndrome (PMWS) and porcine circovirus type 2 subclinical infection (PCV2SI), which have a major economic impact on the pig farming industry worldwide. The control strategies investigated consisted on the combination of up to 5 different control measures. The control measures considered were: (1) PCV2 vaccination of piglets (vac); (2) ensuring age adjusted diet for growers (diets); (3) reduction of stocking density (stock); (4) improvement of biosecurity measures (bios); and (5) total depopulation and repopulation of the farm for the elimination of other major pathogens (DPRP). A model was developed to simulate 5 years production of a pig farm with a 3-weekly batch system and with 100 sows. A PMWS/PCV2SI disease and economic model, based on PMWS severity scores, was linked to the production model in order to assess disease losses. This PMWS severity scores depends on the combination post-weaning mortality, PMWS morbidity in younger pigs and proportion of PCV2 infected pigs observed on farms. The economic analysis investigated eleven different farm scenarios, depending on the number of risk factors present before the intervention. For each strategy, an investment appraisal assessed the extra costs and benefits of reducing a given PMWS severity score to the average score of a slightly affected farm. The net present value obtained for each strategy was then multiplied by the corresponding probability of success to obtain an expected value. A stochastic simulation was performed to account for uncertainty and variability. For moderately affected farms PCV2 vaccination alone was the most cost-efficient strategy, but for highly affected farms it was either PCV2 vaccination alone or in combination with biosecurity measures, with the marginal profitability between 'vac' and 'vac+bios' being small. Other strategies such as 'diets', 'vac+diets' and 'bios+diets' were frequently identified as the second or third best strategy. The mean expected values of the best strategy for a moderately and a highly affected farm were £14,739 and £57,648 after 5 years, respectively. This is the first study to compare economic efficiency of control strategies for PMWS and PCV2SI. The results demonstrate the economic value of PCV2 vaccination, and highlight that on highly affected farms biosecurity measures are required to achieve optimal profitability. The model developed has potential as a farm-level decision support tool for the control of this economically important syndrome.

El plan estratégico Argentina Apícola 2017 y su influencia en el sector apícola de la localidad de Tandil

By means of this paper is to critically analyze the current situation of beekeeping in the town of Tandil (Buenos Aires), from the objectives set out in the Strategic Plan Argentina Beekeeping 2017, approved in 2008, whose goal is aimed at that country from becoming a global market leader of value-added bee products, ensuring sustainable development in economic, environmental and social. At first briefly reviews the national bee scene, in which Argentina is known for being the third largest producer of honey, after China and the U.S., while competing with China for the first world exporter, a situation that contrasts with low domestic consumption. Then describes the strategic objectives that promotes the Plan, including: marketing, production, promotion and added value. Then we analyze the main characteristics of the honey industry in the area chosen, the town of Tandil, where the stage is characterized by a large number of small producers who are mostly engaged in the informal sale of honey for direct consumption but whose demand is low, compared to a small number of collectors, packers and exporters that dominate the international market. In general it is observed that, with few exceptions, the honey is exported in bulk, as a commodity, and its main use molasses to improve lower quality of recipient countries. Meanwhile the honey for local consumption, is usually of inferior quality because they generally are not subject to quality controls required by the circuit of export. To overcome the limitations of beekeeping above, highlights the collaborative efforts of government agencies such as the National Institute of Agricultural Technology (INTA) and the Faculty of Veterinary Science, National University Centre of the Province of Buenos Aires. As a preliminary conclusion, it is argued that the Strategic Plan Argentina Beekeeping is still valid as a tool for development of the sector, and is also essential to encourage the development of competitive products in terms of quality and differentiation, through the development of technology and knowledge sharing to ensure growth and sustainability of beekeeping in the town of Tandil

El plan estratégico Argentina Apícola 2017 y su influencia en el sector apícola de la localidad de Tandil

By means of this paper is to critically analyze the current situation of beekeeping in the town of Tandil (Buenos Aires), from the objectives set out in the Strategic Plan Argentina Beekeeping 2017, approved in 2008, whose goal is aimed at that country from becoming a global market leader of value-added bee products, ensuring sustainable development in economic, environmental and social. At first briefly reviews the national bee scene, in which Argentina is known for being the third largest producer of honey, after China and the U.S., while competing with China for the first world exporter, a situation that contrasts with low domestic consumption. Then describes the strategic objectives that promotes the Plan, including: marketing, production, promotion and added value. Then we analyze the main characteristics of the honey industry in the area chosen, the town of Tandil, where the stage is characterized by a large number of small producers who are mostly engaged in the informal sale of honey for direct consumption but whose demand is low, compared to a small number of collectors, packers and exporters that dominate the international market. In general it is observed that, with few exceptions, the honey is exported in bulk, as a commodity, and its main use molasses to improve lower quality of recipient countries. Meanwhile the honey for local consumption, is usually of inferior quality because they generally are not subject to quality controls required by the circuit of export. To overcome the limitations of beekeeping above, highlights the collaborative efforts of government agencies such as the National Institute of Agricultural Technology (INTA) and the Faculty of Veterinary Science, National University Centre of the Province of Buenos Aires. As a preliminary conclusion, it is argued that the Strategic Plan Argentina Beekeeping is still valid as a tool for development of the sector, and is also essential to encourage the development of competitive products in terms of quality and differentiation, through the development of technology and knowledge sharing to ensure growth and sustainability of beekeeping in the town of Tandil

El plan estratégico Argentina Apícola 2017 y su influencia en el sector apícola de la localidad de Tandil

By means of this paper is to critically analyze the current situation of beekeeping in the town of Tandil (Buenos Aires), from the objectives set out in the Strategic Plan Argentina Beekeeping 2017, approved in 2008, whose goal is aimed at that country from becoming a global market leader of value-added bee products, ensuring sustainable development in economic, environmental and social. At first briefly reviews the national bee scene, in which Argentina is known for being the third largest producer of honey, after China and the U.S., while competing with China for the first world exporter, a situation that contrasts with low domestic consumption. Then describes the strategic objectives that promotes the Plan, including: marketing, production, promotion and added value. Then we analyze the main characteristics of the honey industry in the area chosen, the town of Tandil, where the stage is characterized by a large number of small producers who are mostly engaged in the informal sale of honey for direct consumption but whose demand is low, compared to a small number of collectors, packers and exporters that dominate the international market. In general it is observed that, with few exceptions, the honey is exported in bulk, as a commodity, and its main use molasses to improve lower quality of recipient countries. Meanwhile the honey for local consumption, is usually of inferior quality because they generally are not subject to quality controls required by the circuit of export. To overcome the limitations of beekeeping above, highlights the collaborative efforts of government agencies such as the National Institute of Agricultural Technology (INTA) and the Faculty of Veterinary Science, National University Centre of the Province of Buenos Aires. As a preliminary conclusion, it is argued that the Strategic Plan Argentina Beekeeping is still valid as a tool for development of the sector, and is also essential to encourage the development of competitive products in terms of quality and differentiation, through the development of technology and knowledge sharing to ensure growth and sustainability of beekeeping in the town of Tandil

Industrialization Policies of Korea and Taiwan and Their Effects on Manufacturing Productivity

In this paper the total factor productivity (TFP) of the manufacturing sectors in Taiwan and the Republic of Korean was measured and compared using the growth accounting method. Through descriptive analysis, inefficiency in the Korean manufacturing sectors was revealed, especially for the period prior to 1986. Also for the period posterior to 1986, it was found that TFP tended to contribute more to the value-added growth in both countries. An econometric analysis with industrialization-related variables revealed a contrast in the structure of TFP growth between the two countries. Import penetration, capital intensity, and growth of real output were estimated to exert a positive productivity impact in Taiwan, reflecting Taiwan's flexibility and superiority in factor utilization compared with Korea. It was estimated that the export ratio did not have any major productivity impact in both countries, in contrast with the results reported by the World Bank (The East Asian Miracle: Economic Growth and Public Policy, New York: Oxford University Press, 1993).

Industrialization in Indonesia since the 1970s

Introduction: During the period from the latter half of the 1980s until just before the Asian currency crisis in 1997, Indonesia’s economic development had drawn expectations and attention from various quarters, along with Malaysia and Thailand within the same Association of Southeast Asian Nations (ASEAN). In fact, the 1993 report by the World Bank, entitled “East Asian Miracle: Economic Growth and Public Policy,” recognized Indonesia as one of the East Asian economies with the strong economic performance, i.e. sustained economic growth (World Bank [1993]). And it was the manufacturing industry that had been the driving force behind Indonesia’s economic growth during that period. Since the 1997 outbreak of the Asian currency crisis, however, the manufacturing sector in Indonesia has been mired in a situation that rules out the kind of bright prospects it had emanated previously. The Indonesian economy is still in the developing stage, and in accordance with the history of industrial structural changes in other countries, Indonesia’s manufacturing industry can still be expected to serve as the engine of the country’s economic development. But is it really possible in an environment where economic liberalization and globalization are forging ahead? And, what sort of problems have to be dealt with to make it possible? To answer these questions, it is necessary to know the current conditions of Indonesia’s manufacturing sector, and to do that, it becomes important to think back on the history of the country’s industrialization. Thus, this paper is intended to retrace and unlock the track of Indonesia’s industrialization up until the establishment of the manufacturing sector in its present form, with the ultimate goal being to give answers to the above-mentioned questions. Subject to an analysis in this paper is the period from the installment of President Soeharto’s administration onward when industrialization of the modern industrial sector2 moved into high gear. 　　　The composition of this paper is outlined below. Section 1 first shows why it is important to examine import substitution and export orientation, both of which are used as the measures of the analysis in this paper, in tracking the history of the industrialization, and then discuss indicators of import substitution and export orientation as well as statistical data and resources needed to develop those indicators. Section 2 clarifies the status of the manufacturing industry among all industries by looking at the composition ratio of the manufacturing industry in terms of value added, imports and exports. Section 3 to 5 cover three periods between 1971 and 1995 and make an analysis of import substitution, export orientation and changes in the industrial structure for each period. Section 3 analyzes the period from 1971 through 1985, when Indonesia pursued the import substitution policy amid the oil boom. Section 4 covers the period from 1985 through 1990, when the packages of deregulatory measures were announced successively under structural adjustment policies made necessary by the fall in oil prices. Section 5 examines the period from 1990 through 1995, which saw the alternate shifts between the overheating of the economy by sharply rising investment by both domestic and foreign investors in the wake of the liberalization of investment, trade and financial services, and polices to cool down the economy. Section 6, which covers the 1995-1999 period straddling the economic crisis, is designed for an analysis of the changes in production trends before and after the economic crisis as well as the changes in the industrial structure. Section 7, after summing up the history of Indonesia’s industrialization examined in the previous sections, discusses problems found in respective sectors and attempts to present future prospects for the country’s manufacturing industry.

China's regional economies and value chains : an interregional input-output analysis

Attempts to understand China’s role in global value chains have often noted the case of Apple's iPhone production, in particular the fact that the value added during the Chinese portion of the iPhone’s supply chain is no more than 4%. However, when we examine the Chinese economy as a whole in global production networks, China’s share in total induced value added by China’s exports of final products to the USA is about 75% in 2005. This leads us to investigate how Chinese value added is created and distributed not only internationally but also domestically. To elucidate the increasing complexity of China’s domestic production networks, this paper focuses on the measure of Domestic Value Chains (DVCs) across regions and their linkages with global markets. By using China’s 1997 and 2007 interregional input-output tables, we can understand in detail the structural changes in domestic trade in terms of value added, as well as the position and degree of participation of different regions within the DVCs.

Compilation, application and challenge of IDE-JETRO's International Input-Output tables

International input-output tables are among the most useful tools for economic analysis. Since these tables provide detailed information about international production networks, they have recently attracted considerable attention in research on spatial economics, global value chains, and issues relating to trade in value-added. The Institute of Developing Economies at the Japan External Trade Organization (IDE-JETRO) has more than 40 years of experience in the construction and analysis of international input-output tables. This paper explains the development of IDE-JETRO’s multi-regional input-output projects including the construction of the Asian International Input-Output table and the Transnational Interregional Input-Output table between China and Japan. To help users understand the features of the tables, this paper also gives examples of their application.

Agriculture Plus Plus : growth strategy for Myanmar agriculture

The development of agriculture is a main pillar of Myanmar’s growth strategies. It is natural for the Myanmar government to prioritize agriculture as a source of economic growth, since it accounted for 36% of GDP, employs a majority of labor force, and generates nearly 30% of exports as of 2010. Although the agricultural share in GDP and employment usually declines as an economy grows, it is not a sunset industry in Myanmar. Methods exist for increasing agriculture’s value added other than the growth of labor and land inputs. The key is to enhance three productivity measures: labor, land, and total productivity. We call this strategy "Agriculture Plus Plus."

Impacts of common rules of origin on FTA utilization

This paper examines empirically the impacts of sharing rules of origin (RoOs) with other ASEAN+1 free trade agreements (FTAs) on ASEAN-Korea FTA/ASEAN-China FTA utilization in Thai exports in 2011. Our careful empirical analysis suggests that the harmonization of RoOs across FTAs play some role in reducing the costs yielded through the spaghetti bowl phenomenon. In particular, the harmonization to "change-in-tariff classification (CTC) or real value-added content (RVC)" will play a relatively positive role in not seriously discouraging firms’ use of multiple FTA schemes. On the other hand, the harmonization to CTC or CTC&RVC hinders firms from using those schemes.

Assessment of FDI impact on Thailand's production sectors : implications for investment promotion activities

This paper examines the overall and sectoral economic impact of foreign direct investment (FDI) on the Thai economy using the economic data from 2005-2013. In assessing the overall economic impact, it is found that FDI has contributed positively to Thailand's economic growth. However, when analyzing the sectoral details, the empirical results indicate that FDI has a varying impact on the productive sectors in Thailand. Out of the 9 sub-sectors covered by this study, 5 sub-sectors (manufacturing, construction, financial, wholesale, retail trade, and agriculture) show strong statistically-significant positive effects of FDI on the relevant sector's value-added output. Based on these findings, it is suggested that policy-makers, including the Board of Investment, should aim to promote FDI with special consideration of the sectoral impact that would enable Thailand's FDI promotion policies to be more productive and beneficial for the Thai economy.

Tracing CO2 emissions in global value chains

This paper integrates two lines of research into a unified conceptual framework: trade in global value chains and embodied emissions. This allows both value added and emissions to be systematically traced at the country, sector, and bilateral levels through various production network routes. By combining value-added and emissions accounting in a consistent way, the potential environmental cost (amount of emissions per unit of value added) along global value chains can be estimated. Using this unified accounting method, we trace CO2 emissions in the global production and trade network among 41 economies in 35 sectors from 1995 to 2009, basing our calculations on the World Input–Output Database, and show how they help us to better understand the impact of cross-country production sharing on the environment.

Using the input-output approach to measure participation in GVCs : the case of Costa Rica

In order to illustrate how the input-output approach can be used to explore various aspects of a country's participation in GVCs, this paper applies indicators derived from the concept of trade in value-added (TiVA) to the case of Costa Rica. We intend to provide developing countries that seek to foster GVC-driven structural transformation with an example that demonstrates an effective way to measure progress. The analysis presented in this paper makes use of an International Input-Output Table (IIOT) that was constructed by including Costa Rica's first Input-Output Table (IOT) into an existing IIOT. The TiVA indicator has been used to compare and contrast import flows, export flows and bilateral trade balances in terms of gross trade and trade in value-added. The country's comparative advantage is discussed based on a TiVA-related indicator of revealed comparative advantage. The paper also decomposes the domestic content of value added in each sector and measures the degree of fragmentation in the value chains in which Costa Rica participates, highlighting the partner countries that add the most value.

Temporary jobs and globalization

Deregulation of the use of temporary workers in 2004 (the Worker Dispatching Act of 2004) has been regarded as an important reason for the recent rise of temporary workers in Japan. However, the shift from permanent to temporary workers began long before. This paper empirically explores links between the shift from permanent to temporary workers in the Japanese manufacturing sector and economic globalization, using industry-level data. We find that outsourcing is positively correlated with the replacement of permanent workers with temporary workers in domestic production. In addition, we find that industries losing world share of value added tend to decrease the employment of permanent workers. Industries with higher exports or imports are aggressive in using temporary workers, which suggests the role of temporary workers as an employment buffer.

Desintegración vertical en la industria del automóvil en España: un caso de estudio = Vertical disintegration in the automotive industry in Spain: a case study

En los años recientes se ha producido un rápido crecimiento del comercio internacional en productos semielaborados que son diseñados, producidos y ensamblados en diferentes localizaciones a lo largo de diferentes países, debido principalmente a los siguientes motivos: el desarrollo de las tecnologías de la información, la reducción de los costes de transporte, la liberalización de los mercados de capitales, la armonización de factores institucionales, la integración económica regional que implica la reducción y la eliminación de las barreras al comercio, el desarrollo económico de los países emergentes, el uso de economías de escala, así como una desregulación del comercio internacional. Todo ello ha incrementado la competencia a nivel mundial en los mercados y ha posibilitado a las compañías tener más facilidad de acceso a potenciales mercados, así como a la adquisición de capacidades y conocimientos en otros países y a la realización de alianzas estratégicas internacionales con terceros, creando un entorno con mayor incertidumbre y más exigente para las compañías que componen una industria, y que tiene consecuencias directas en las operaciones de las compañías y en la organización de su producción. Las compañías, para adaptarse, ser competitivas y beneficiarse de este nuevo escenario globalizado y más competitivo, han externalizado partes del proceso productivo hacia proveedores especializados, creando un nuevo mercado intermedio que divide el proceso productivo, anteriormente integrado en las compañías que conforman una industria, entre dos conjuntos de empresas especializadas en esa industria. Dicho proceso suele ocurrir conservando la industria en que tiene lugar, los mismos servicios y productos, la tecnología empleada y las compañías originales que la conformaban previamente a la desintegración vertical. Todo ello es así debido a que es beneficioso tanto para las compañías originales de la industria como para las nuevas compañías de este mercado intermedio por diversos motivos. La desintegración vertical en una industria tiene unas consecuencias que la transforman completamente, así como la forma de operar de las compañías que la integran, incluso para aquellas que permanecen verticalmente integradas. Una de las características más importantes de esta desintegración vertical en una industria es la posibilidad que tiene una compañía de adquirir a una tercera la primera parte del proceso productivo o un bien semielaborado, que posteriormente será finalizado por la compañía adquiriente con la práctica del outsourcing; así mismo, una compañía puede realizar la primera parte del proceso productivo o un bien semielaborado, que posteriormente será finalizado por una tercera compañía con la práctica de la fragmentación. El principal objetivo de la presente investigación es el estudio de los motivos, los facilitadores, los efectos, las consecuencias y los principales factores significativos, microeconómicos y macroeconómicos, que desencadenan o incrementan la práctica de la desintegración vertical en una industria; para ello, la investigación se divide en dos líneas completamente diferenciadas: el estudio de la práctica del outsourcing y, por otro lado, el estudio de la fragmentación por parte de las compañías que componen la industria del automóvil en España, puesto que se trata de una de las industrias más desintegradas verticalmente y fragmentadas, y este sector posee una gran importancia en la economía del país. En primer lugar, se hace una revisión de la literatura existente relativa a los siguientes aspectos: desintegración vertical, outsourcing, fragmentación, teoría del comercio internacional, historia de la industria del automóvil en España y el uso de las aglomeraciones geográficas y las tecnologías de la información en el sector del automóvil. La metodología empleada en cada uno de ellos ha sido diferente en función de la disponibilidad de los datos y del enfoque de investigación: los factores microeconómicos, utilizando el outsourcing, y los factores macroeconómicos, empleando la fragmentación. En el estudio del outsourcing, se usa un índice basado en las compras externas sobre el valor total de la producción. Así mismo, se estudia su correlación y significación con las variables económicas más importantes que definen a una compañía del sector del automóvil, utilizando la técnica estadística de regresión lineal. Aquellas variables relacionadas con la competencia en el mercado, la externalización de las actividades de menor valor añadido y el incremento de la modularización de las actividades de la cadena de valor, han resultado significativas con la práctica del outsourcing. En el estudio de la fragmentación se seleccionan un conjunto de factores macroeconómicos, comúnmente usados en este tipo de investigaciones, relacionados con las principales magnitudes económicas de un país, y un conjunto de factores macroeconómicos, no comúnmente usados en este tipo de investigaciones, relacionados con la libertad económica y el comercio internacional de un país. Se emplea un modelo de regresión logística para identificar qué factores son significativos en la práctica de la fragmentación. De entre todos los factores usados en el modelo, los relacionados con las economías de escala y los costes de servicio han resultado significativos. Los resultados obtenidos de los test estadísticos realizados en el modelo de regresión logística han resultado satisfactorios; por ello, el modelo propuesto de regresión logística puede ser considerado sólido, fiable y versátil; además, acorde con la realidad. De los resultados obtenidos en el estudio del outsourcing y de la fragmentación, combinados conjuntamente con el estado del arte, se concluye que el principal factor que desencadena la desintegración vertical en la industria del automóvil es la competencia en el mercado de vehículos. Cuanto mayor es la demanda de vehículos, más se reducen los beneficios y la rentabilidad para sus fabricantes. Estos, para ser competitivos, diferencian sus productos de la competencia centrándose en las actividades que mayor valor añadido aportan al producto final, externalizando las actividades de menor valor añadido a proveedores especializados, e incrementando la modularidad de las actividades de la cadena de valor. Las compañías de la industria del automóvil se especializan en alguna o varias de estas actividades modularizadas que, combinadas con el uso de factores facilitadores como las economías de escala, las tecnologías de la información, las ventajas de la globalización económica y la aglomeración geográfica de una industria, incrementan y motivan la desintegración vertical en la industria del automóvil, desencadenando la coespecialización en dos sectores claramente diferenciados: el sector de fabricantes de vehículos y el sector de proveedores especializados. Cada uno de ellos se especializa en unas actividades y en unos productos o servicios específicos de la cadena de valor, lo cual genera las siguientes consecuencias en la industria del automóvil: se reducen los costes de transacción en los productos o servicios intercambiados; se incrementan la relación de dependencia entre fabricantes de vehículos y proveedores especializados, provocando un aumento en la cooperación y la coordinación, acelerando el proceso de aprendizaje, posibilitando a ambos adquirir nuevas capacidades, conocimientos y recursos, y creando nuevas ventajas competitivas para ambos; por último, las barreras de entrada a la industria del automóvil y el número de compañías se ven alteradas cambiando su estructura. Como futura línea de investigación, los fabricantes de vehículos tenderán a centrarse en investigar, diseñar y comercializar el producto o servicio, delegando el ensamblaje en manos de nuevos especialistas en la materia, el contract manufacturer; por ello, sería conveniente investigar qué factores motivantes o facilitadores existen y qué consecuencias tendría la implantación de los contract manufacturer en la industria del automóvil. 1.1. ABSTRACT In recent years there has been a rapid growth of international trade in semi-finished products designed, produced and assembled in different locations across different countries, mainly due to the following reasons: development of information technologies, reduction of transportation costs, liberalisation of capital markets, harmonisation of institutional factors, regional economic integration, which involves the reduction and elimination of trade barriers, economic development of emerging countries, use of economies of scale and deregulation of international trade. All these factors have increased competition in markets at a global level and have allowed companies to gain easier access to potential markets and to the acquisition of skills and knowledge in other countries, as well as to the completion of international strategic alliances with third parties, thus creating a more demanding and uncertain environment for these companies constituting an industry, which has a direct impact on the companies' operations and the organization of their production. In order to adapt, be competitive and benefit from this new and more competitive global scenario, companies have outsourced some parts of their production process to specialist suppliers, generating a new intermediate market which divides the production process, previously integrated in the companies that made up the industry, into two sets of companies specialized in that industry. This process often occurs while preserving the industry where it takes place, its same services and products, the technology used and the original companies that formed it prior to vertical disintegration. This is because it is beneficial for both the industry's original companies and the companies belonging to this new intermediate market, for various reasons. Vertical disintegration has consequences which completely transform the industry where it takes place as well as the modus operandi of the companies that are part of it, even of those who remain vertically integrated. One of the most important features of vertical disintegration of an industry is the possibility for a company to acquire from a third one the first part of the production process or a semi-finished product, which will then be finished by the acquiring company through the practice of outsourcing; also, a company can perform the first part of the production process or a semi-finish product, which will then be completed by a third company through the practice of fragmentation. The main objective of this research is to study the motives, facilitators, effects, consequences and major significant microeconomic and macroeconomic factors that trigger or increase the practice of vertical disintegration in a certain industry; in order to do so, research is divided into two completely differentiated lines: on the one hand, the study of the practise of outsourcing and, on the other, the study of fragmentation by companies constituting the automotive industry in Spain, since this is one of the most vertically disintegrated and fragmented industries and this particular sector is of major significance in this country's economy. First, a review is made of the existing literature, on the following aspects: vertical disintegration, outsourcing, fragmentation, international trade theory, history of the automobile industry in Spain and the use of geographical agglomeration and information technologies in the automotive sector. The methodology used for each of these aspects has been different depending on the availability of data and the research approach: the microeconomic factors, using outsourcing, and the macroeconomic factors, using fragmentation. In the study on outsourcing, an index is used based on external purchases in relation to the total value of production. Likewise, their significance and correlation with the major economic variables that define an automotive company are studied, using the statistical technique of linear regression. Variables related to market competition, outsourcing of lowest value-added activities and increased modularisation of the activities of the value chain have turned out to be significant with the practice of outsourcing. In the study of fragmentation, a set of macroeconomic factors commonly used for this type of research, is selected, related to the main economic indicators of a country, as well as a set of macroeconomic factors, not commonly used for this type of research, which are related to economic freedom and the international trade of a certain country. A logistic regression model is used to identify which factors are significant in the practice of fragmentation. Amongst all factors used in the model, those related to economies of scale and service costs have turned out to be significant. The results obtained from the statistical tests performed on the logistic regression model have been successful; hence, the suggested logistic regression model can be considered to be solid, reliable and versatile; likewise, it is in line with reality. From the results obtained in the study of outsourcing and fragmentation, combined with the state of the art, it is concluded that the main factor that triggers vertical disintegration in the automotive industry is competition within the vehicle market. The greater the vehicle demand, the lower the earnings and profitability for manufacturers. These, in order to be competitive, differentiate their products from the competition by focusing on those activities that contribute with the highest added value to the final product, outsourcing the lower valueadded activities to specialist suppliers, and increasing the modularity of the activities of the value chain. Companies in the automotive industry specialize in one or more of these modularised activities which, combined with the use of enabling factors such as economies of scale, information technologies, the advantages of economic globalisation and the geographical agglomeration of an industry, increase and encourage vertical disintegration in the automotive industry, triggering co-specialization in two clearly distinct sectors: the sector of vehicle manufacturers and the specialist suppliers sector. Each of them specializes in certain activities and specific products or services of the value chain, generating the following consequences in the automotive industry: reduction of transaction costs of the goods or services exchanged; growth of the relationship of dependency between vehicle manufacturers and specialist suppliers, which causes an increase in cooperation and coordination, accelerates the learning process, enables both to acquire new skills, knowledge and resources, and creates new competitive advantages for both; finally, barriers to entry the automotive industry and the number of companies are altered, changing their structure. As a future line of research, vehicle manufacturers will tend to focus on researching, designing and marketing the product or service, delegating the assembly in the hands of new specialists in the field, the contract manufacturer; for this reason, it would be useful to investigate what motivating or facilitating factors exist in this respect and what consequences would the implementation of contract manufacturers have in the automotive industry.