Structural and successional variability of periphytic algal community in a Amazonian lake during the dry and rainy season (Rio Branco, Acre)

The colonization process and successional patterns of a periphytic algal community were evaluated in a Amazonian Viveiro Lake (Rio Branco, Acre, Brazil). Sampling was performed over a period of 35 days; at four-day intervals for 20 days, and then at five-day intervals. Water sampling for physical, chemical and biological analyses was done during the dry and rainy season. Glass slides were used as artificial substrates for periphyton colonization. The structural community was evaluated through population density, algae class, diversity indices and descriptive species. Species richness, diversity and evenness increased as succession progressed. While density of Bacillariophyceae, Euglenophyceae and Zygnemaphyceae increased with succession, Cyanobacteria remained dominant. Synechocystis aquatilis, Synechocystis diplococcus and Navicula pseudolanceolata were the main descriptive species in both the dry and rainy season. Cymbela tumida, Frustulia rhomboides, Trachelomonas lacustris and Closterium acicularis was correlated with an increase in hydrologic level during the rainy season. Conversely, the density of Chlamydomonas sp., Chroomonas nordstedtii, Trachelomonas volvocinopsis, Trachelomonas volvocina and Synechococcus linearis was correlated with an increase in water transparency during the dry season. In general, the periphytic algal community showed high diversity and species richness independent of season. Season also had little influence on representation of algae class and main descriptive species. However, successional patterns varied by season, and changes in hydrologic levels acted directly on the succession path of periphytic algae. More research on periphyton dynamics is needed to improve our understanding of tropical lake ecosystems, especially in Amazonian.

The influence of the conservation status and changes in the rainfall regime on forest-savanna mosaic dynamics in Northern Brazilian Amazonia

Coupled carbon/climate models are predicting changes in Amazon carbon and water cycles for the near future, with conversion of forest into savanna-like vegetation. However, empirical data to support these models are still scarce for Amazon. Facing this scenario, we investigated whether conservation status and changes in rainfall regime have influenced the forest-savanna mosaic over 20 years, from 1986 to 2006, in a transitional area in Northern Amazonia. By applying a spectral linear mixture model to a Landsat-5-TM time series, we identified protected savanna enclaves within a strictly protected nature reserve (Maracá Ecological Station - MES) and non-protected forest islands at its outskirts and compared their areas among 1986/1994/2006. The protected savanna enclaves decreased 26% in the 20-years period at an average rate of 0.131 ha year-1, with a greater reduction rate observed during times of higher precipitation, whereas the non-protected forest islands remained stable throughout the period of study, balancing the encroachment of forests into the savanna during humid periods and savannization during reduced rainfall periods. Thus, keeping favorable climate conditions, the MES conservation status would continue to favor the forest encroachment upon savanna, while the non-protected outskirt areas would remain resilient to disturbance regimes. However, if the increases in the frequency of dry periods predicted by climate models for this region are confirmed, future changes in extension and directions of forest limits will be affected, disrupting ecological services as carbon storage and the maintenance of local biodiversity.

Yield of essential oil and safrole content based on fresh and dry biomass of long pepper in the Brazilian Amazon

Long pepper (Piper hispidinervum) is an Amazonian species of commercial interest due to the production of safrole. Drying long pepper biomass to extract safrole is a time consuming and costly process that can also result in the contamination of the material by microorganisms. The objective of this study was to analyze the yield of essential oil and safrole content of fresh and dried biomass of long pepper accessions maintained in the Active Germoplasm Bank of Embrapa Acre, in the state of Acre, Brazil, aiming at selecting genotypes with best performance on fresh biomass to recommend to the breeding program of the species. Yield of essential oil and safrole content were assessed in 15 long pepper accessions. The essential oil extraction was performed by hydrodistillation and analyzed by gas chromatography. A joint analysis of experiments was performed and the means of essential oil yield and safrole content for each biomass were compared by Student's t-test. There was variability in the essential oil yield and safrole content. There was no difference between the types of biomass for oil yield; however to the safrole content there was difference. Populations 9, 10, 12 and 15 had values of oil yield between 4.1 and 5.3%, and safrole content between 87.2 and 94.3%. The drying process does not interfere in oil productivity. These populations have potential for selection to the long pepper breeding program using oil extraction in the fresh biomass

Characterization of dry-stack interlocking compressed earth blocks

Earth has been a traditional building material to construct houses in Africa. One of the most common techniques is the use of sun dried or kiln fired adobe bricks with mud mortar. Fired bricks are the main cause for deforestation in countries like Malawi. Although this technique is low-cost, the bricks vary largely in shape, strength and durability. This leads to weak houses which suffer considerable damage during floods and seismic events. One solution is the use of dry-stack masonry with stabilized interlocking compressed earth blocks (ICEB). This technology has the potential of substituting the current bricks by a more sustainable kind of block. This study was made in the context of the HiLoTec project, which focuses on houses in rural areas of developing countries. For this study, Malawi was chosen for a case study. This paper presents the experimental results of tests made with dry-stack ICEBs. Soil samples from Malawi were taken and studied. Since the experimental campaign could not be carried out in Malawi, a homogenization process of Portuguese soil was made to produce ICEBs at the University of Minho, Portugal. Then, the compression and tensile strength of the materials was determined via small cylinder samples. Subsequently, the compression and flexural strength of units were determined. Finally, tests to determine the compressive strength of both prisms and masonry wallets and to determine the initial shear strength of the dry interfaces were carried out. This work provides valuable data for low-cost eco-efficient housing

Filamentous fungi occurrence in free water and biofilms from drinking water storage tanks

In some regions of Brazil, especially where the water is scarce, drinking water is stored in water storage tanks. This practice gives the consumer the guarantee of available water. The water storage conditions such as the exposure to hot weather when the tanks are on rooftops allow the development of microorganisms and microbial biofilms which can deteriorate the water quality and increase the risk to human health [1,2]. This study describes the filamentous fungi (FF) detected in free water and biofilms in drinking water storage tanks in Recife - Pernambuco, Brazil. Five sampling times in triplicate were performed at two distinct points. Colony-forming units (CFU) of FF fungi were determined with 0.45 μm filtration membranes using peptone glucose rose Bengal agar (PGRBA). From the 30 samples analysed a total of 1136 CFU were obtained. The water biofilms were collected from samplers consisting of polyethylene coupons, previously installed in the reservoirs. These coupons were transferred to PGRBA plates and incubated using with the same conditions described for free FF. For the in situ detection of FF in biofilms the Calcofluor White staining technique was used. This procedure demonstrated FF forming biofilms on the surfaces of the coupons. Brazilian legislation does not define limits for FF in drinking water. However considering the potential risk of fungal contamination, the data obtained in this study will contribute to developing future quantitative and qualitative parameters for the presence of fungi in drinking water distribution systems in Brazil.

Cutinase promotes dry esterification of cotton cellulose

Cutinase from Thermobifida fusca was used to esterify the hydroxyl groups of cellulose with the fatty acids from triolein. Cutinase and triolein were pre-adsorbed on cotton and the reaction proceeded in a dry state during 48 hours at 35ºC. The cutinase-catalyzed esterification of the surface of cotton fabric resulted in the linkage of the oleate groups to the glycoside units of cotton cellulose. The superficial modification was confirmed by performing ATR-FTIR on treated cotton samples and by MALDI-TOF analysis of the liquors from the treatment of the esterified cotton with a crude cellulase mixture. Modified cotton fabric also showed a significant increase of hydrophobicity. This work proposes a novel bio-based approach to obtain hydrophobic cotton. This article is protected by copyright. All rights reserved.

Terapéutica farmacológica y de pequeñas moléculas en patologías de atesoramiento lisosomal: focalización en las Lipofuscinosis Ceroideas Neuronales. Farmaceutical and small molecules therapy in lysosomal storage diseases: focus on the Neuronal Ceroid Lipofuscinoses.

Introducción: Las Lipofuscinosis Ceroideas Neuronales (LCNs) son un grupo de patologías neurodegenerativas hereditarias de atesoramiento lisosomal (PALs) caracterizadas por el almacenamiento en los lisosomas de materiales complejos pobremente reconocidos. Su curso es muy severo con desenlace fatal, habiendo sido definidos diversos tipos sobre la base del estudio de los fenotipos clínicos, enzimáticos, morfológicos y las mutaciones. Su incidencia es de 1:12.500 nacimientos vivos a nivel mundial. Las intervenciones farmacológicas con moléculas pequeñas han sido exitosas para algunas PALs; sin embargo, debido a que para cada una de las moléculas ha sido asumido un mecanismo de acción, la efectividad puede estar limitada a uno o a pocos desórdenes y no beneficiar a otros. Se han comprobado efectos diversos de una serie de moléculas tales como Miglustat, Chaperonas moleculares diseñadas, Clenbuterol, N-acetilcisteina (Mucomyst), Cisteamina, Gentamicina y PTC124. Los tratamientos farmacológicos/ con moléculas pequeñas podrían resultar exitosos para las LCNs, mereciendo consideración desarrollar terapias para estos desórdenesObjetivo generalo Investigar en un tipo de patologías del sistema nervioso central, las Lipofuscinosis Ceroideas Neuronales, el enfoque terapéutico-farmacológico con pequeñas moléculas aplicado a otras patologías hereditarias.Objetivos específicoso Desarrollar un prototipo de cultivo de fibroblastos de pacientes a nivel hospitalario en Córdoba y mantener cultivos de fibroblastos de pacientes afectados de una LCN de genotipo CLN2, con mutaciones conocidas. o Enriquecer los cultivos con fármacos/ moléculas pequeñas probadas en otras PALs.o Averiguar si se produce incremento de actividad enzimática de la Tripeptidil Peptidasa-I (TPP-I) lisosomal.Materiales y Métodos: cultivo de fibroblastos de pacientes con el agregado de fármacos/pequeñas moléculas. Los donantes serán diagnosticados en CEMECO a través de una estrategia sistematizada para el reconocimiento de las LCNs y se identificarán las mutaciones en el gen CLN2 causales de enfermedad. Se averiguará la actividad enzimática de TPP-I y se marcará la enzima con anticuerpos específicos en corridas electroforéticas por western blot. Resultados esperados: incrementos en la actividad enzimática de TPP-I en los cultivos celulares con agregado de fármacos/ pequeñas moléculas con respecto a los controles. Importancia del proyecto: se trata de una investigación traduccional (traslational research) en la cual la clínica y los servicios a pacientes se vinculan con la investigación científica, desde una perspectiva de integración. Se desarrolla en un Hospital Público, el Hospital de Niños de la Provincia de Córdoba, asiento del Centro de Estudio de las Metabolopatías Congénitas-CEMECO. Se beneficiarán los pacientes, dado que impactará sobre la calidad de los servicios hospitalarios al suministrar diagnósticos bajo los estándares internacionales, en estrecha vinculación con centros referenciales del exterior. Se obtendrán para los genes de las LCNs los datos del espectro de mutaciones y polimorfismos presentes en la región y se aportarán datos sobre posibilidades de las terapias farmacológicas en relación a cada una de las mutaciones.

Síntesis y Caracterización de Materiales Nanoestructurados para el Almacenamiento de Hidrógeno. Hidrogen storage: Synthesis and characterization of nanostructured materials.

El hidrógeno tiene, actualmente, una atención considerable por su posible uso como combustible limpio y otros usos industriales y se ha demostrado que es posible hacer funcionar motores de combustión interna, por lo tanto es una alternativa viable respecto de fuentes de energía no renovables como el petróleo y tal vez sea en el futuro la tecnología más prometedora para reducir la contaminación, conservando el suministro de combustibles fósiles. Uno de los principales problemas para la utilización del hidrógeno como combustible es el del almacenamiento para que pueda ser seguro y transportable con todos los riesgos que esto supone. En este sentido el estudio de la adsorción de polímeros conductores (tal como polianilina, PANI o polipirrol PPy) y su posterior polimerización sobre hospedajes como aluminosilicatos meso y microporosos y carbones mesoporosos, es de suma importancia por sus propiedades para el almacenamiento de H2. El objetivo general de este proyecto es Investigar el almacenamiento de hidrógeno en nuevos composites nano/microestructurados. La síntesis de materiales micro/mesoporosos (MFI, MEL, BEA, L, MS41, SBA-15, SBA-1, SBA-3, SBA-16, CMK-3) para usos como hospedaje se realizan por sol-gel o síntesis hidrotérmica y se modificarán con TiO2, CeO2, ZrO2 y eventualmente con Ir, Ni, Zr. Muestras de estos hospedajes serán expuestos a vapores del monómero puro (anilina o pirrol). Luego se polimerizarán por polimerización oxidativa. Los nanocomposites sintetizados se caracterizarán por XRD, FTIR, DSC, TGA, SEM, TEM, EXFAS, XANES, UV-Vis. La adsorción de hidrógeno sobre los composites se llevará a cabo en un Reactor Parr, desde presiones atmosféricas y a altas presiones y varias temperaturas de adsorción . Los estudios de desorción de hidrogeno se llevarán a cabo en un equipo Chemisorb Micrometrics y se realizarán estudios termogravimétricos y de capacidad de retención de Hidrogeno por el nanocomposite. La importancia del estudio de este proceso tiene importantes implicancias económicas y sociales que serán preponderantes en el futuro debido a las cada vez más exigentes regulaciones ambientales. Además se contribuirá al avance del conocimiento científico, ya que es posible diseñar nuevos materiales, los que además permitirán generar reservorios de H2 con alta eficiencia. Por lo consiguiente: - Se desarrollarán nuevos materiales nanoestructurados, micro y mesoporosos y nanoclusters de especies activas en los hospedajes como así también la inclusión de polímeros (PANI, PPy) dentro de los canales de estos materiales. - Se caracterizarán estos materiales por métodos espectroscópicos (fisicoquímica de superficie). - Se estudiará la adsorción /absorcion de H2 en los nuevos materiales desarrollados. -Se aplicarán métodos de diseño de experimento (RDS), para optimizar el proceso de almacenamiento de H2, nivel de interacción de variables sinérgicas o colinérgicas.

DINAMICA MICROBIANA Y CALIDAD DE LA MATERIA ORGANICA DEL SUELO COMO INDICADORES DE SUSTENTABILIDAD EN EL CHACO ARIDO DE LA PROVINCIA DE CORDOBA Microbial dynamic and organic matter quality as indicators of soil sustainability in Dry Chaco of Córdoba Province

Se propone analizar el efecto del uso productivo en el Chaco Árido de la provincia de Córdoba, mediante la aplicación de indicadores de sustentabilidad relacionados con la calidad de la materia orgánica y la liberación de nutrientes en el suelo, con la finalidad de aportar a un tema de suma interes para la provincia de Córdoba como es la formulación de criterios y pautas de manejo para la implementación de la Ley de Bosques (N° 26331). Se trabajará en la localidad de San Miguel en el departamento Pocho, en un sitio de bosque no disturbado y en tres sistemas productivos: desmonte selectivo con implantación de pasturas; desmonte total con agricultura bajo riego y desmonte total sobrepastoreado. En cada sitio se medirá “in situ” la emisión de CO2 y se tomaran muestras de suelo a las que se les determinará: a) contenido de materia orgánica total (MO), b) contenido de sustancias húmicas (SH), diferenciando ácidos húmicos (AH) y fúlvicos (AF), c) abundancia y actividad de microorganismos nitrificadores y d) propiedades químicas de los AH y AF. Se calcularán los siguientes índices de sustentabilidad a) materia orgánica biodisponible (MOB=MO–SH); b) índice de humificación (IH=SH/MO); c) tipo de humus (TH=AF/AH; d) índice de mineralización de C (IMC=CO2/MO); e) índice de nitrificación (IN=actividad/abundancia); y f) índice de estabilidad de las fracciones humificadas: compuestos aromáticos/ alifáticos. Los datos serán analizados estadísticamente mediante ANOVA y comparación de medias por LSD (P<0.05) y tests multivariados. We proposed analyze the effect of land use in Arid Chaco of Cordoba province, using sustainability indicators related to organic matter quality and nutrient release in soil, with the aim to formulate management criteria for the implementation of the Ley de Bosques (N° 26331) in Córdoba province. The study will be conducted in San Miguel village in Pocho department, in one undisturbed forest site and three productive systems: selective clearing with grass sowing; total clearing with irrigation agriculture and total clearing with overgrazed. In each site "in situ" CO2 emission will be measured and soil samples will be taken, in which the following parameters will be determined: a) total organic matter content (MO), b) humic substances content (SH), in humic acids (AH) and fulvic acids (AF), c) abundance and activity of nitrifier microorganisms and d) chemical properties of AH and AF. The sustainability indexes will be calculated: biodisponible organic matter (MOB=MO–SH); b) humification index (IH=SH/MO); c) humus type (TH=AF/AH; d) C mineralization index (IMC=CO2/MO); e) nitrifying index (IN=activity/abundance); and f) humic fractions stability index: aromatic/aliphatic compounds. The data will be statistically analyzed by ANOVA and the means will be compared by LSD (P<0.05) and multivariate tests.

Mejoramiento del comportamiento térmico de sistemas de calentamiento de agua solares termosifónicos hechos con materiales no convencionales y con tanques de almacenamiento verticales y horizontales Performance improvement of solar thermosyphonic systems for water heating made of non conventional materials and using horizontal and vertical storage tanks

El objeto de estudio de este proyecto son los sistemas de calentamiento de agua mediante energía solar que funcionan termosifónicamente. En particular se tratará con dos diseños particulares generados por fabricantes de la Provincia de Córdoba y que han solicitado el asesoramiento del Grupo de Energía Solar (GES) para el mejoramiento de la performance térmica de dichos equipos. Se trata de dos sistemas que tienen materiales no tradicionales y se diferencian además por tener una distinta disposición del tanque de almacenamiento: uno es en forma vertical y el otro en forma horizontal. Basados en los resultados de un ensayo bajo norma internacional, donde se detectaron algunas puntos factibles de mejora, se propone en este proyecto el análisis en detalle de los equipos, para lo cual se les debe desarmar completos, para realizar un estudio analítico y experimental de los mismos con el objeto de hacer un planteo teórico-analítico del comportamiento de los mismos, con la implementación de propuestas de mejora y chequeo de los resultados. Se propone entonces como objetivo lograr un mejoramiento de la performance térmica de los citados equipos a partir de un estudio experimental y analítico. Asumiendo esta posibilidad de mejora, se plantea la hipótesis de que es posible representar el funcionamiento de estos equipos mediante modelos físico-matemáticos desarrollados a partir de ecuaciones y correlaciones conocidas y procesos a interpretar mediante resoluciones numéricas y softwares específicos de simulación. De esta manera, se plantea el despieze completo de los equipos para estudiar en detalle su estructura y conexiones internas y a partir de la geometría, dimensiones y propiedades termofísicas de materiales constructivos y fluidos de trabajo, realizar modelos físico-matemáticos que permitan realizar variaciones de propiedades y geometría y así buscar las mejores combinaciones que produzcan equipos más eficientes térmicamente. Los modelos físico-matemáticos serán codificados en lenguajes de alto nivel para poder luego de una validación de los modelos, correr simulaciones en un software de reconocimiento internacional que permite sumar dichos modelos mediante un protocolo de comunicación, haciendo que las poderosas prestaciones del software se puedan aplicar a nuestros modelos. Se complementará el estudio con un análisis exergético para identificar los puntos críticos en que se producen las pérdidas de oportunidad de aprovechar la energía disponible, para así analizar cómo solucionar los problemas en dichos puntos. Los materiales a utilizar serán los propios equipos provistos por los fabricantes, que serán modificados convenientemente para operarlos como prototipos Se espera obtener un conocimiento acabado de los procesos y principios de funcionamiento de los equipos, que permita plantear las mejoras, las cuales se implementarán en los prototipos, realizándose una medición mediante norma igual a la inicial para ver en que magnitud se logran las mejoras esperadas. Se pretende además que las mejoras a implementar, en la etapa de transferencia a las empresas involucradas, redunden no sólo en un beneficio técnico, sino que también los sea desde el punto de vista económico. Para ello se trabajará también sobre los procesos y métodos de fabricación para que los equipos mejorados no sean mas caros que los originales y de ser posible sean aún más económicos, todo esto apuntando a la difusión de la energía solar térmica y poner al alcance de todos estos equipos tan convenientes para la propagación de las energías limpias. El proyecto redundará también en un importante beneficio para el conocimiento de la comunidad científica en general, con el aporte de nuevos resultados en diseños novedosos y con nuevos materiales. Además, la institución se beneficiará con la formación que obtendrán los integrantes del proyecto, muchos de ellos en etapa de realización de sus estudios de posgrado y en una etapa importante de su vida como investigadores. The main goal of this project is the improvement of two thermosyphonic solar water heating systems, made of non conventional materials and with different arrangement of their storage tanks: one is vertical and the other one horizontal. The thermosyphonic systems are provided by manufacturers of the Córdoba Province, who came to the Solar Energy Group (GES) of the National University of Río Cuarto looking for help for the design of their products. In an agreement with these manufacturers, it was proposed this project in order to work analytically and experimentally in order to obtain physical-mathematical models of these two systems, which allow for changes to look by means of simulations the best changes to implement on the equipments for the improvement of their thermal performance. Then, the materials to be used are the proper systems provided by the manufacturers, which will be disarmed to be studied in detail. After the analytical study the proposals of improvement will be implemented in a high level language of programming to perform simulations in the environment of a well-known software for energy simulations (TRNSYS). After the simulations, the best modifications will be physically implemented in the prototypes to perform finally the same normalized test of the beginning and check the magnitude of the implemented improvements. The importance of this project is based on the offer of better systems the companies would make, which would benefit the deployment of the thermal solar energy. Another relevant point is to make the new equipments at the same cost of the previous ones or cheaper, in order to achieve a good deployment of the solar water heating systems; then, the manufacture processes and methods must be studied to obtain not only good technical solutions, but also economical equipments. In addition, this project will contribute to the increasing of the knowledge in the area of thermosyphonic solar systems and the training of postgraduate students.

Investigation into the feasibility of a West of Ireland Pumped Storage System

Ireland’s remote position on the tip of Europe ensures that the country is vulnerable to uncertainty of supply. The reliance on conventional sources of electricity has ensured that escalated prices and high carbon emissions have been witnessed whilst opportunities that inherent resources provide, such as the wind, have not been capitalised upon. The intermittent nature of the wind make it difficult to maximise its potential as in many cases the highest wind speeds are highest when demand is low. The West of Ireland’s combination of wind speeds and unique topography makes it suitable for and innovative wind powered pumped storage system, which can essentially regulate the wind generated electricity and integrate further penetration of renewable energy. In addition, its location along the Atlantic Ocean provides further scope for innovation as seawater can be integrated into the system design. The construction of such an unprecedented project in combination with increased interconnectors has the potential to make Ireland a rechargeable battery for Europe. However, such ambitious plans are at the very early stages and are in direct contrast to current events in the Irish energy market. This study focuses on the feasibility of West of Ireland pumped storage systems. Entailed within this is an extensive desk study, a detailed site selection process and a feasibility study of grid connection. To increase opportunities to identify the best possible site, the feasibility study was focused on the Galway and Mayo areas solely.

Screening for Fabry Disease in Left Ventricular Hypertrophy: Documentation of a Novel Mutation

AbstractBackground:Fabry disease is a lysosomal storage disease caused by enzyme α-galactosidase A deficiency as a result of mutations in the GLA gene. Cardiac involvement is characterized by progressive left ventricular hypertrophy.Objective:To estimate the prevalence of Fabry disease in a population with left ventricular hypertrophy.Methods:The patients were assessed for the presence of left ventricular hypertrophy defined as a left ventricular mass index ≥ 96 g/m2 for women or ≥ 116 g/m2 for men. Severe aortic stenosis and arterial hypertension with mild left ventricular hypertrophy were exclusion criteria. All patients included were assessed for enzyme α-galactosidase A activity using dry spot testing. Genetic study was performed whenever the enzyme activity was decreased.Results:A total of 47 patients with a mean left ventricular mass index of 141.1 g/m2 (± 28.5; 99.2 to 228.5 g/m2] were included. Most of the patients were females (51.1%). Nine (19.1%) showed decreased α-galactosidase A activity, but only one positive genetic test − [GLA] c.785G>T; p.W262L (exon 5), a mutation not previously described in the literature. This clinical investigation was able to establish the association between the mutation and the clinical presentation.Conclusion:In a population of patients with left ventricular hypertrophy, we documented a Fabry disease prevalence of 2.1%. This novel case was defined in the sequence of a mutation of unknown meaning in the GLA gene with further pathogenicity study. Thus, this study permitted the definition of a novel causal mutation for Fabry disease - [GLA] c.785G>T; p.W262L (exon 5).

Accumulation of dry matter and macronutrients by two varieties of sweet sorghum

Samples of two varieties of sweet .sorghum (Brandes and Rio) grown on a Dark Red Latosol (Barra Bonita, SP) were collected and analysed (dry matter and macronutrient contents) at intervals of 20 days. Both varieties showed faster uptake of most of the nutrients between flower initiation and head formation. Variety Brandes, in said period, took up more nutrients per day than the other, although its cycle was longer.

Dry matter production and nutrient exportation by pruned leaves and branches of apple trees

A trial was conducted on Latossol Vermelho Escuro Orto (Orthox) at Buri, State of São Paulo, Brazil. The material was collected from 'Ohio Beauty¹ and 'Brasil¹ apples trees grafted on 'Doucin'; the trees were 3-4, 4-5 and 6-7 years old. The authors concluded that at the dormant period differen ces were observed on the dry matter production as well on the nutrients exported by the leaves and branches of the two varieties. Branches exported higher amounts of P, Ca, B, Cu and Zn. Larger quantities of N, P and Mn were exported by the 1 eaves.

Spatial and trophic interactions in wet and dry seasons between gambusia luma and Gambusia sexradiata (Pisces: Poecilidae) in Belize, Central America / David W. Greenfield, Chester F. Rakocinski, Teresa A. Greenfield.

n.s. no.14(1983)