Provenance discrimination of Lower Cretaceous synrift sandstones (eastern Iberian Chain Spain) Constraints from detrital modes heavy minerals and geochemistry

Petrography, geochemical whole-rock composition, and chemical analyses of tourmaline were performed in order to determine the source areas of Lower Cretaceous Mora, El Castellar, and uppermost Camarillas Formation sandstones from the Iberian Chain, Spain. Sandstones were deposited in intraplate subbasins, which are bound by plutonic and volcanic rocks of Permian, Triassic, and Jurassic age, Paleozoic metamorphic rocks, and Triassic sedimentary rocks. Modal analyses together with petrographic and cathodoluminescence observations allowed us to define three quartz-feldspathic petrofacies and recognize diagenetic processes that modified the original framework composition. Results from average restored petrofacies are: Mora petrofacies = P/F >1 and Q(r)70 F(r)22 R(r)9; El Castellar petrofacies = P/F >1 and Q(r)57 F(r)25 R(r)18; and Camarillas petrofacies = P/F ∼ zero and Q(r)64 F(r)28 R(r)7 (P—plagioclase; F—feldspar; Q—quartz; R—rock fragments; r—restored composition). Trace-element and rare earth element abundances of whole-rock analyses discriminate well between the three petrofacies based on: (1) the Rb concentration, which is indicative of the K content and reflects the amount of K-feldspar modal abundance, and (2) the relative modal abundance of heavy minerals (tourmaline, zircon, titanite, and apatite), which is reproduced by the elements hosted in the observed heavy mineral assemblage (i.e., B and Li for tourmaline; Zr, Hf, and Ta for zircon; Ti, Ta, Nb, and their rare earth elements for titanite; and P, Y, and their rare earth elements for apatite). Tourmaline chemical composition for the three petrofacies ranges from Fe-tourmaline of granitic to Mg-tourmaline of metamorphic origin. The three defined petrofacies suggest a mixed provenance from plutonic and metamorphic source rocks. However, a progressively major influence of granitic source rocks was detected from the lowermost Mora petrofacies toward the uppermost Camarillas petrofacies. This provenance trend is consistent with the uplift and erosion of the Iberian Massif, which coincided with the development of the latest Berriasian synrift regional unconformity and affected all of the Iberian intraplate basins. The uplifting stage of Iberian Massif pluton caused a significant dilution of Paleozoic metamorphic source areas, which were dominant during the sedimentation of the lowermost Mora and El Castellar petrofacies. The association of petrographic data with whole-rock geochemical compositions and tourmaline chemical analysis has proved to be useful for determining source area characteristics, their predominance, and the evolution of source rock types during the deposition of quartz-feldspathic sandstones in intraplate basins. This approach ensures that provenance interpretation is consistent with the geological context.

Geochemistry of Cretaceous sills and lava flows of ODP Holes 129-800A and 129-802A

On the basis of their respective eruptive environments and chemical characteristics, alkalic dolerite sills from the northern Pigafetta Basin (Site 800) and tholeiitic pillow lavas from the Mariana Basin (Site 802) sampled during Ocean Drilling Program Leg 129 are considered to represent examples of the widespread mid-Cretaceous volcanic event in the western Pacific. Both groups of basic rocks feature mild, low-grade, anoxic smectite-celadonite-carbonate-pyrite alteration; late-stage oxidation is very limited in extent, with the exception of the uppermost sill unit at Site 800. The aphyric and nonvesicular Site 800 alkalic dolerite sills are all well-evolved mineralogically and chemically, being mainly of hawaiite composition, and are similar to ocean island basalts. They are characterized by high contents of incompatible elements (for example, 300-400 ppm Zr), well-fractionated rare earth element patterns ([La/Yb]N 18-21) and HIMU isotopic characters. They probably represent deep-sea, lateral, intrusive off-shoots from nearby seamounts of similar age. The olivine-plagioclase +/- clinopyroxene phyric tholeiitic pillow lavas and thin flows of Site 802 are nonvesicular and quench-textured throughout. Relative to normal-type mid-ocean ridge basalt, they are enriched in large-ion-lithophile elements, exhibit flat (unfractionated) rare earth element patterns and have distinctive (lower) Zr/Nb, Zr/Ta, La/Ta, and Hf/Th ratios. Overall they are compositionally and isotopically similar to the mid-Cretaceous tholeiites of the Nauru basin and the Ontong-Java and Manihiki plateaus. The Site 802 tholeiites differ from the thickened crustal segments of the oceanic plateaus, however, in apparently representing only a thin veneer over the local basement in an off-axis environment.

Chemobiostratigraphy of the Cretaceous/Paleocene boundary at ODP Hole 120-750A

An integrated biostratigraphic and stable isotope investigation was conducted on a high-latitude sequence across the Cretaceous/Paleogene (K/P) boundary recovered in Hole 750A in the southern Indian Ocean. The sequence consists of nannofossil chalk and is discontinuous across the boundary; missing is an estimated 0.3-m.y. late Maestrichtian and early Danian interval. Nonetheless, because calcareous nannofossil Zones NP1 and NP2 are well-developed, micropaleontological studies of the sequence have yielded a detailed record of Danian high-latitude microplankton evolution. In addition, stable carbon isotope analyses of planktonic and benthic foraminifer and bulk samples provide a record of late Maestrichtian and early Danian surface- and deep-water carbon isotope variations. Together, the carbon isotope and carbonate accumulation records serve as an index of regional marine net productivity across the boundary. Earliest Danian nannoplankton assemblages consisted mainly of persistent genera that were generally rare or absent in the Upper Cretaceous at Hole 750A. However, by 0.5-0.6 m.y. after the boundary, newly evolving Danian taxa became dominant. The turnover in nannofossil assemblages was accompanied by significant changes in rates of net productivity as gauged by carbon isotope distributions and carbonate accumulation rates. During the period dominated by persistent taxa, net productivity was extremely low, as reflected by the absence of vertical delta13C gradients and reduced carbonate accumulation rates. Later in the Danian, as new species evolved and flourished, vertical delta13C gradients reappeared and carbonate accumulation rates increased, signaling partial recovery of net productivity in this region. The absolute timing and magnitude of late Maestrichtian and early Danian biotic and geochemical changes in the southern Indian Ocean were similar to those recorded in other pelagic K/P boundary sequences from low- and mid-latitude Atlantic and Pacific sites, indicating that these events were ubiquitous.

Magnetic properties of Cenozoic MORB and Cretaceous MORB from DSDP and ODP holes

The fact that the natural remanent magnetization (NRM) intensity of mid-oceanic-ridge basalt (MORB) samples shows systematic variations as a function of age has long been recognized: maximum as well as average intensities are generally high for very young samples, falling off rather rapidly to less than half the recent values in samples between 10 and 30 Ma, whereupon they slowly rise in the early Tertiary and Cretaceous to values that approach those of the very young samples. NRM intensities measured in this study follow the same trends as those observed in previous publications. In this study, we take a statistical approach and examine whether this pattern can be explained by variations in one or more of all previously proposed mechanisms: chemical composition of the magnetic minerals, abundance of these magnetization carriers, vectorial superposition of parallel or antiparallel components of magnetization, magnetic grain or domain size patterns, low-temperature oxidation to titanomaghemite, or geomagnetic field behavior. We find that the samples do not show any compositional, petrological, rock-magnetic, or paleomagnetic patterns that can explain the trends. Geomagnetic field intensity is the only effect that cannot be directly tested on the same samples, but it shows a similar pattern as our measured NRM intensities. We therefore conclude that the geomagnetic field strength was, on-average, significantly greater during the Cretaceous than during the Oligocene and Miocene.

Lower Cretaceous nannofossils of the northwestern Australian margin

Moderately to sparsely nannofossiliferous Neocomian siliciclastics and rich Aptian-Albian nannofossil chalks were cored at two Leg 123 sites on the abyssal plains off northwestern Australia. At Site 765, the basal 70 m of cored section yields questionable Tithonian and Berriasian to early Hauterivian assemblages of moderate diversity containing Cruelellipsis cuvillieri, Tegumentum striatum, Speetonia colligata, and Crucibiscutum salebrosum. The overlying Hauterivianlower Aptian is represented by 140 m of sediments barren of nannofossils. Above this, the remaining 80 m of the Lower Cretaceous section has been assigned to the Rhagodiscus angustus Zone (late Aptian-early Albian in age) and the Prediscosphaera columnata Zone (middle-late Albian in age). Common species include Rhagodiscus angustus, Prediscosphaera columnata, Eprolithus floralis, Eprolithus sp., Chiastozygus litterarius, Rucinolithus irregularis, and Flabellites biforaminis. At Site 766, the Neocomian, represented by 200 m of sediment, yields C. cuvillieri, T. striatum, S. colligata, and C. salebrosum. Within the overlying Aptian-Albian sequence of 80 m, the Rhagodiscus angustus, and P. columnata zones were recognized. The paleobiogeographic patterns and implications are discussed, with special emphasis paid to the bipolar high-latitude distribution pattern of C. salebrosum in the Valanginian-Hauterivian. Biostratigraphically important species are discussed and their occurrence in the Indian Ocean is compared with one from the Tethys and Boreal realms. Two new species, Serbiscutum gaultensis and Eprolithus bettenstaedtii, are described.

Lower Cretaceous planktonic foraminifer stratigraphy of sediments from ODP Leg 171B sites

During Ocean Drilling Program Leg 171B, an Aptian to Turonian sedimentary succession yielding exceptionally well-preserved planktonic foraminiferal faunas was recovered at Sites 1049, 1050, and 1052. Most of the standard Tethyan planktonic foraminiferal zones have been recognized within the mid-Cretaceous section, with the exception of two Albian zones not reached by any of the drilled holes. In addition, some emphasis is brought here on the current problems concerning the definition of the Aptian/Albian and Albian/Cenomanian boundaries.

Chemistry of Jurassic/Cretaceous black shales

Black shale samples of Jurassic to Cretaceous age recovered during the 'Norwegian Shelf Drilling Program' between 1987 and 1991 from Sites 7430/10-U-01 (Barents Sea), 6814/04-U-02 (Norwegian Shelf near the Lofoten) and 6307/07-U-02 (Norwegian Shelf near Trondheim) were analyzed for major and trace elements. These laminated black shales are characterized by high total organic carbon (TOC) and total sulfur (TS) contents as well as by significant enrichments in several redox-sensitive and/or sulfide-forming trace metals (Ag, Bi, Cd, Co, Cr, Cu, Mo, Ni, Re, Sb, Tl, U, V, and Zn). Enrichment factors relative to 'average shale' are comparable to those found in Cenomanian-Turonian boundary event (CTBE) black shales and Mediterranean sapropels. The Re content is high in the studied black shales, with maximum values up to 1221 ng/g. Re/Mo ratios averaging 2.3*10**-3 are close to the seawater value. High trace metal enrichments and Re/Mo ratios close to the seawater value point to a dominantly anoxic and sulfidic water column during black shale formation. Interbeds with higher Re/Mo ratios, especially in high-resolution sampled core sections, point to brief periods of suboxic conditions. Additionally, enhanced Zn concentrations in the black shales from the Barents Sea support the assumption that hydrothermal activity was also high during black shale deposition. Trace metal signatures of black shales at different drill sites on a transect along the Norwegian Shelf are not only influenced by water depth but also by their location in the boreal realm. Metal enrichments are higher in the northern compared to the southern sites. Volgian (=Tithonian 151-144 Ma BP) black shales exhibit elevated trace metal contents in comparison to their Berriasian (144-137 Ma BP) counterparts. This probably reflects a change in the circulation pattern during periods of black shale formation. Therefore different paleoceanographic conditions, probably controlled by climatic change linked to the transgression of the paleo-sealevel and the North Atlantic opening, may have developed from the Volgian to the Berriasian.

(Table 1) Concentrations and isotopic ratio of Argon in Cretaceous deep-sea basaltic glass of DSDP Hole 51-417D

The abundance and isotopic composition of rare gas in the mantle provides an important constraint on the origin and evolution of the Earth's atmosphere. One of sources of such information is basalts which erupted from ocean ridges. Ozima (1975, doi:10.1016/0016-7037(75)90054-X) stated that a high 40Ar/36Ar ratio in the mantle suggests sudden degassing at an early stage of the Earth's evolution. Several authors (Funkhouser et al., 1968, doi:10.1016/S0012-821X(68)80021-4; Darlymple and Moor, 1968, doi:10.1126/science.161.3846.1132) have reported excess 40Ar and high 40Ar/36Ar ratios in rapidly quenched rims of young deep-sea basalts. However, the Ar composition in old ridge basalts was not known. We report here a measurement of the isotopic composition of Ar in old deep-sea basalts. The Glomar Challenger drilled a Cretaceous ocean floor near the southern end of the Bermuda Rise in Deep Sea Drilling Project. The drilled site (Site 417) is on the magnetic anomaly MO which has been estimated to be 108 Myr old.

Carbonate content in lower Cretaceous sediments of ODP Hole 123-765C

Sediments recovered during Ocean Drilling Program (ODP) Leg 123 from the Argo Abyssal Plain (AAP) consist largely of turbidites derived from the adjacent Australian continental margin. The oldest abundant turbidites are Valanginian-Aptian in age and have a mixed (smarl) composition; they contain subequal amounts of calcareous and siliceous biogenic components, as well as clay and lesser quartz. Most are thin-bedded, fine sand- to mud-sized, and best described by Stow and Piper's model (1984) for fine-grained biogenic turbidites. Thicker (to 3 m), coarser-grained (medium-to-coarse sand-sized) turbidites fit Bouma's model (1962) for sandy turbidites; these generally are base-cut-out (BCDE, BDE) sequences, with B-division parallel lamination as the dominant structure. Parallel laminae most commonly concentrate quartz and/or calcispheres vs. lithic clasts or clay, but distinctive millimeter- to centimeter-thick, radiolarian-rich laminae occur in both fine- and coarse-grained Valanginian-Hauterivian turbidites. AAP turbidites were derived from relatively deep parts of the continental margin (outer shelf, slope, or rise) that lay below the photic zone, but above the calcite compensation depth (CCD). Biogenic components are largely pelagic (calcispheres, foraminifers, radiolarians, nannofossils); lesser benthic foraminifers are characteristic of deep-water (abyssal to bathyal) environments. Abundant nonbiogenic components are mostly clay and clay clasts; smectite is the dominant clay species, and indicates a volcanogenic provenance, most likely the Triassic-Jurassic volcanic suite exposed along the northern Exmouth Plateau. Lower Cretaceous smarl turbidites were generated during eustatic lowstands and may have reached the abyssal plain via Swan Canyon, a submarine canyon thought to have formed during the Late Jurassic. In contrast to younger AAP turbidites, however, Lower Cretaceous turbidites are relatively fine-grained and do not contain notably older reworked fossils. Early in its history, the northwest Australian margin provided mainly contemporaneous slope sediment to the AAP; marginal basins adjacent to the continent trapped most terrigenous detritus, and pronounced canyon incisement did not occur until Late Cretaceous and, especially, Cenozoic time.