Improvement of the thermal performance of commercial freezers using phase change materials (PCM)

The aim of this work is to improve the thermal performance of commercial freezers using phase change materials (PCM) and the prove the importance of the correct PCM selection (melting temperature) for each application. To do this a vertical freezer with and without macro encapsulation PCM are used to assess the benefits of using PCM in minimizing temperature fluctuations and to maintain at the lowest possible temperature the freezer under heat of losses.

How hard is a commercial puzzle: the eternity II challenge

Recently, edge matching puzzles, an NP-complete problem, have received, thanks to money-prized contests, considerable attention from wide audiences. We consider these competitions not only a challenge for SAT/CSP solving techniques but also as an opportunity to showcase the advances in the SAT/CSP community to a general audience. This paper studies the NP-complete problem of edge matching puzzles focusing on providing generation models of problem instances of variable hardness and on its resolution through the application of SAT and CSP techniques. From the generation side, we also identify the phase transition phenomena for each model. As solving methods, we employ both; SAT solvers through the translation to a SAT formula, and two ad-hoc CSP solvers we have developed, with different levels of consistency, employing several generic and specialized heuristics. Finally, we conducted an extensive experimental investigation to identify the hardest generation models and the best performing solving techniques.

Evaluation and implementation process for commercial elevator landing doors

Tason ovet voivat olla joko itsesuunniteltuja ja -tehtyjä, tai itse malli ja tuote voidaan ostaa myös yrityksen ulkoa. Tätä make-or-buy kysymystä pohdittaessa ilmenee monta tekijää, jotka vaikuttavat päätökseen. Jos yritys käsittää ostamisen parempana vaihtoehtona, tuote tarvitsee myösimplementointisuunnitelman. Tämän työn päätavoite oli luoda arviointi- ja implementointiprosessi kaupallisille hissin tason oville. Muut tavoitteet olivat: selvittää syyt tälle erikoiselle toiminnolle, löytää kaupallisten ovien käyttöön liittyvät edut ja haitat, sekä luoda kriteerit tason ovien arvioinnille. Lopputuloksena saatiin, että tämän prosessin suorittajan pitää sitoutua arviointi- ja implementointiprosessiin,ja että myös virtuaalitehdas tarvitaan täydentämään arviointivaihetta. Mutta tärkein havainto oli, että tulevaisuuden ovistrategia ei ole vielä täysin päätetty ja siitä syystä yrityksen omat ovimallit pitäisi testata ja verrata niitä kaupallisiin ovimalleihin käyttämällä tämän työn arviointiprosessia.

Broadband prices in the European Union : competition and commercial strategies

This paper analyses the determinants of broadband Internet access prices in a group of 15 EU countries between 2008 and 2011. Using a rich panel dataset of broadband plans, we show the positive effect of downstream speed on prices, and report that cable and fibre-to-the-home technologies are available at lower prices per Mbps than x DSL technology. Operators’marketing strategies are also analysed as we show how much prices rise when the broadband service is offered in a bundle with voice telephony and/or television, and how much they fall when download volume caps are included. The most insightful results of this study are provided by a group of metrics that represent the situation of competition and entry patterns in the broadband market. We show that consumer segmentation positively affects prices. On the other hand, broadband prices are higher in countries where entrants make greater use of bitstream access and lower when they use more intensively direct access -local loop unbundling-. However, we do not find a significant effect of inter-platform competition on prices.

Annuaire de la papeterie française et étrangère (technique, industriel et commercial, fondé en 1865)

Variante(s) de titre : Annuaire général de la papeterie française et étrangère

Annuaire de la papeterie française et étrangère (technique, industriel et commercial, fondé en 1865)

1865 (A1).

Fast and economic immobilization methods described for non-commercial Pseudomonas lipases

There is an increasing interest to seek new enzyme preparations for the development of new products derived from bioprocesses to obtain alternative bio-based materials. In this context, four non-commercial lipases from Pseudomonas species were prepared, immobilized on different low-cost supports, and examined for potential biotechnological applications. Results: To reduce costs of eventual scaling-up, the new lipases were obtained directly from crude cell extracts or from growth culture supernatants, and immobilized by simple adsorption on Accurel EP100, Accurel MP1000 and Celite (R) 545. The enzymes evaluated were LipA and LipC from Pseudomonas sp. 42A2, a thermostable mutant of LipC, and LipI. 3 from Pseudomonas CR611, which were produced in either homologous or heterologous hosts. Best immobilization results were obtained on Accurel EP100 for LipA and on Accurel MP1000 for LipC and its thermostable variant. Lip I. 3, requiring a refolding step, was poorly immobilized on all supports tested ( best results for Accurel MP1000). To test the behavior of immobilized lipases, they were assayed in triolein transesterification, where the best results were observed for lipases immobilized on Accurel MP1000. Conclusions: The suggested protocol does not require protein purification and uses crude enzymes immobilized by a fast adsorption technique on low-cost supports, which makes the method suitable for an eventual scaling up aimed at biotechnological applications. Therefore, a fast, simple and economic method for lipase preparation and immobilization has been set up. The low price of the supports tested and the simplicity of the procedure, skipping the tedious and expensive purification steps, will contribute to cost reduction in biotechnological lipase-catalyzed processes.

Retinal damage induced by commercial light emitting diodes (LEDs).

Spectra of "white LEDs" are characterized by an intense emission in the blue region of the visible spectrum, absent in daylight spectra. This blue component and the high intensity of emission are the main sources of concern about the health risks of LEDs with respect to their toxicity to the eye and the retina. The aim of our study was to elucidate the role of blue light from LEDs in retinal damage. Commercially available white LEDs and four different blue LEDs (507, 473, 467, and 449nm) were used for exposure experiments on Wistar rats. Immunohistochemical stain, transmission electron microscopy, and Western blot were used to exam the retinas. We evaluated LED-induced retinal cell damage by studying oxidative stress, stress response pathways, and the identification of cell death pathways. LED light caused a state of suffering of the retina with oxidative damage and retinal injury. We observed a loss of photoreceptors and the activation of caspase-independent apoptosis, necroptosis, and necrosis. A wavelength dependence of the effects was observed. Phototoxicity of LEDs on the retina is characterized by a strong damage of photoreceptors and by the induction of necrosis.

Bulletin de la Ville de Paris : journal administratif, littéraire, commercial et financier : paraissant le lundi

1881/06/06 (A3,N23).

Bulletin de la Ville de Paris : journal administratif, littéraire, commercial et financier : paraissant le lundi

1883/03/05 (A5,N10).

Bulletin de la Ville de Paris : journal administratif, littéraire, commercial et financier : paraissant le lundi

1880/08/23 (A2,N29).

Bulletin de la Ville de Paris : journal administratif, littéraire, commercial et financier : paraissant le lundi

1881/04/25 (A3,N17).

Bulletin de la Ville de Paris : journal administratif, littéraire, commercial et financier : paraissant le lundi

1883/02/05 (A5,N6).

Bulletin de la Ville de Paris : journal administratif, littéraire, commercial et financier : paraissant le lundi

1881/10/17 (A3,N42).