Clinical evaluation of three incision size-dependent phacoemulsification systems.

PURPOSE:

To compare the outcomes of cataract surgery performed with 3 incision size-dependent phacoemulsification groups (1.8, 2.2, and 3.0 mm).

DESIGN:

Prospective randomized comparative study.

METHODS:

One hundred twenty eyes of 120 patients with age-related cataract (grades 2 to 4) were categorized according to the Lens Opacities Classification System III. Eligible subjects were randomly assigned to 3 surgical groups using coaxial phacoemulsification through 3 clear corneal incision sizes (1.8, 2.2, and 3.0 mm). Different intraoperative and postoperative outcome measures were obtained, with corneal incision size and surgically induced astigmatism as the main clinical outcomes.

RESULTS:

There were no statistically significant differences in most of the intraoperative and postoperative outcome measures among the 3 groups. However, the mean cord length of the clear corneal incision was increased in each group after surgery. The mean maximal clear corneal incision thickness in the 1.8-mm group was significantly greater than for the other groups at 1 month. The mean surgically induced astigmatism in the 1.8- and 2.2-mm groups was significantly less than that in the 3.0-mm group after 1 month, without significant difference between the 1.8- and 2.2-mm groups.

CONCLUSIONS:

With appropriate equipment, smaller incisions may result in less astigmatism, but the particular system used will influence incision stress and wound integrity, and may thus limit the reduction in incision size and astigmatism that is achievable.

Electrospun fibrous mats for skin and abdominal wall repair

Esta tese centra-se no desenvolvimento de materiais biodegradáveis e nãodegradáveis produzidos por eletrofiação com aplicação na área biomédica. O poli(3-hidroxibutirato-co-3-hidroxivalerato) (PHBV), um poliéster biodegradável, foi selecionado como base dos materiais biodegradáveis, enquanto o poli(tereftalato de etileno) (PET), um polímero sintético, estável e biocompatível, foi selecionado para a produção das matrizes não degradáveis. Adicionou-se quitosana aos sistemas com o objetivo de melhorar o processo de eletrofiação e as propriedades morfológicas, físico-químicas e biológicas dos materiais resultantes. A composição química, bem como as características morfológicas e físicoquímicas dos materiais em estudo, foram manipuladas de modo a otimizar a sua performance como suportes celulares para engenharia de tecidos. Foram realizados estudos in vitro com cultura de fibroblastos L929 para avaliar o comportamento das células, i.e. viabilidade, adesão, proliferação e morte, quando cultivadas nas matrizes produzidas por eletrofiação. Adicionalmente foram realizados ensaios in vivo para investigar o potencial dos materiais em estudo na regeneração cutânea e como tela abdominal. Os principais resultados encontrados incluem: o desenvolvimento de novas matrizes híbridas (PHBV/quitosana) adequadas ao crescimento de fibroblastos e ao tratamento de lesões de pele; o desenvolvimento de um sistema de eletrofiação com duas seringas para a incorporação de compostos bioativos; diversas estratégias para manipulação das características morfológicas dos materiais de PHBV/quitosana e PET/quitosana produzidos por eletrofiação; uma melhoria do conhecimento das interações fibroblastos-suporte polimérico; a verificação de uma resposta inflamatória desencadeada pelos materiais nãodegradáveis quando utilizados no tratamento de defeitos da parede abdominal, o que sugere a necessidade de novos estudos para avaliar a segurança do uso de biomateriais produzidos por eletrofiação.

Nanocomposites as probes for biodetection by SERS

The present work aimed to explore the potential of new nanocomposites based on carbon nanostructures and metal nanoparticles for the detection of biomolecules through surface enhanced Raman scattering (SERS). In a first step, polyvinyl alcohol composites were prepared incorporating silver nanoparticles by two different reduction procedures. At first without introduction of carbon nanostructures. These composites showed good results for the SERS identification of nucleic acids. Next, the synthesis and characterization of graphene oxide was studied to be used in the preparation of silver and gold nanocomposites. The reduction of this nanomaterial with different chemical agents was explored, since its reduction degree may be a determinant factor for the application envisaged (biomolecules interaction). The preparation of the nanocomposites with silver and gold was performed with different reducing agents. The SERS activity of these new nanocomposites was then explored in the presence of different analytes, varying the experimental conditions for Raman spectra acquisition. It was interesting to verify that the silver containing nanocomposites presented the particularity to intensify the graphene D and G bands. It is also important to highlight that a new eco-friendly reducing agent was tested for the synthesis of the graphene oxide composites, an Eucalyptus Globulus extract. Other variable introduced was the preparation of gold nanostars synthesized with hydroxylamine in the presence of graphene oxide, which allowed the preparation of a new nanocomposite with SERS potential. Fibrous membranes were also prepared by electrospinning with the aim to prepare SERS supports with adequate topography and porosity for the formation of nanoparticles agglomerates for the creation of the so-called hot-spots and also to allow the penetration of the analyte molecules. The polymers polyvinyl alcohol and polyacrylonitrile were selected for electrospinning. Using this technique, electrospun mantles with silver and gold nanoparticles and nanocomposites were prepared. Several variables were studied, such as the introduction of the nano-fillers during the electrospinning process, later deposition of the nano-fillers on the simple electrospun polymeric fibres and surface functionalization of the simple polymeric membranes to link the nano-fillers. At last, the potentialities of using carbon nanotubes forests, produced by chemical vapor deposition and coated with gold film by sputtering, as new SERS substrates were explored. It was found that the SERS detection of DNA bases and ADN itself is possible using these substrates.

Antifungal nanofibers made by controlled release of sea animal derived peptide

© The Royal Society of Chemistry 2015

Electrospun pH-sensitive core–shell polymer nanocomposites fabricated using a tri-axial process

A modified tri-axial electrospinning process was developed for the generation of a new type of pH-sensitive polymer/lipid nanocomposite. The systems produced are able to promote both dissolution and permeation of a model poorly water-soluble drug. First, we show that it is possible to run a tri-axial process with only one of the three fluids being electrospinnable. Using an electrospinnable middle fluid of Eudragit S100 (ES100) with pure ethanol as the outer solvent and an unspinnable lecithin-diclofenac sodium (PL–DS) core solution, nanofibers with linear morphology and clear core/shell structures can be fabricated continuously and smoothly. X-ray diffraction proved that these nanofibers are structural nanocomposites with the drug present in an amorphous state. In vitro dissolution tests demonstrated that the formulations could preclude release in acidic conditions, and that the drug was released from the fibers in two successive steps at neutral pH. The first step is the dissolution of the shell ES100 and the conversion of the core PL–DS into sub-micron sized particles. This frees some DS into solution, and later the remaining DS is gradually released from the PL–DS particles through diffusion. Ex vivo permeation results showed that the composite nanofibers give a more than twofold uplift in the amount of DS passing through the colonic membrane as compared to pure DS; 74% of the transmitted drug was in the form of PL–DS particles. The new tri-axial electrospinning process developed in this work provides a platform to fabricate structural nanomaterials, and the core–shell polymer-PL nanocomposites we have produced have significant potential applications for oral colon-targeted drug delivery.

Avaliação do desempenho de fibras óticas de plástico

A fibra ótica de plástico (POF) tem despertado um grande interesse nas comunicações de banda larga em curtas distâncias, devido à sua simplicidade de instalação, grande flexibilidade e custo reduzido. Por estas razões consiste numa boa alternativa ao cabo coaxial, de par entrelaçado ou mesmo à fibra ótica de sílica (GOF) multimodo. As POFs trabalham na região do visível do espectro eletromagnético ao contrário das GOFs que operam no infravermelho. O valor do índice de refração do núcleo de uma POF depende do tipo de material constituinte, em que o mais comum é o polimetilmetacrilato (PMMA) e o polímero de flúor (PF). O perfil do índice de refração do núcleo pode ser índice em degrau (SI) ou índice gradual (GI). Por serem constituídas por materiais poliméricos, a atenuação e dispersão do sinal é muito maior do que nas GOFs, levando a que só possam ser utilizadas em ligações de distâncias inferiores a 1 km. De forma a fazer a análise do desempenho de sistemas de comunicação ótica com POF, foi utilizado o software de simulação VPIphotonics™ com o qual se fez a parametrização dos componentes, nomeadamente a fonte ótica, a fibra e o fotodetetor. A qualidade do sinal foi analisada através de figuras de mérito como o BER, o diagrama de olho, o diagrama da constelação QAM e o EVM. Dos resultados obtidos concluiu-se que a POF Lucina™ é a que apresenta o melhor desempenho para transmissão de dados com elevados débitos binários (até 40 Gbps), devido a ser constituída por PF e ter um perfil do índice de refração do núcleo do tipo GI. Como tal, esta POF foi escolhida para se implementar na simulação de uma arquitetura DVB-c FTTH, juntamente com uma GOF monomodo, onde os sinais QAM transmitidos a partir da central do operador foram recebidos com sucesso na casa do cliente.

Fibras óticas de plástico em redes de acesso

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Eletrónica e Telecomunicações

A biocomposite of collagen nanofibers and nanohydroxyapatite for bone regeneration

This work aims to design a synthetic construct that mimics the natural bone extracellular matrix through innovative approaches based on simultaneous type I collagen electrospinning and nanophased hydroxyapatite (nanoHA) electrospraying using non-denaturating conditions and non-toxic reagents. The morphological results, assessed using scanning electron microscopy and atomic force microscopy (AFM), showed a mesh of collagen nanofibers embedded with crystals of HA with fiber diameters within the nanometer range (30 nm), thus significantly lower than those reported in the literature, over 200 nm. The mechanical properties, assessed by nanoindentation using AFM, exhibited elastic moduli between 0.3 and 2 GPa. Fourier transformed infrared spectrometry confirmed the collagenous integrity as well as the presence of nanoHA in the composite. The network architecture allows cell access to both collagen nanofibers and HA crystals as in the natural bone environment. The inclusion of nanoHA agglomerates by electrospraying in type I collagen nanofibers improved the adhesion and metabolic activity of MC3T3-E1 osteoblasts. This new nanostructured collagen–nanoHA composite holds great potential for healing bone defects or as a functional membrane for guided bone tissue regeneration and in treating bone diseases.

Électrofilage de fibres à partir de mélanges polystyrène/poly(vinyl méthyl éther)

L’électrofilage est un procédé permettant de préparer des fibres possédant un diamètre de l’ordre du micromètre ou de quelques centaines de nanomètres. Son utilisation est toutefois limitée par le manque de contrôle sur la structure et les propriétés des fibres ainsi produites. Dans ce travail, des fibres électrofilées à partir de mélanges de polystyrène (PS) et de poly(vinyl méthyl éther) (PVME) ont été caractérisées. La calorimétrie différentielle à balayage (DSC) a montré que les fibres du mélange PS/PVME sont miscibles (une seule transition vitreuse) lorsque préparées dans le benzène, alors qu'une séparation de phases a lieu lorsque le chloroforme est utilisé. Les fibres immiscibles sont néanmoins malléables, contrairement à un film préparé par évaporation du chloroforme qui a des propriétés mécaniques médiocres. Des clichés en microscopies optique et électronique à balayage (MEB) ont permis d’étudier l'effet de la composition et du solvant sur le diamètre et la morphologie des fibres. Des mesures d’angles de contact ont permis d’évaluer l’hydrophobicité des fibres, qui diminue avec l’ajout de PVME (hydrophile); les valeurs sont de 60° supérieures à celles des films de composition équivalente. Un retrait sélectif du PVME a été réalisé par l’immersion des fibres dans l’eau. La spectroscopie infrarouge a montré que la composition passe de 70 à 95% de PS pour une fibre immiscible mais seulement à 75% pour une fibre miscible. Ces résultats indiquent que la phase riche en PVME se situe presque uniquement à la surface des fibres immiscibles, ce qui a été confirmé par microscopie à force atomique (AFM) et MEB. Finalement, l’effet du mélange des deux solvants, lors de l’électrofilage du mélange PS/PVME, a été étudié. La présence du chloroforme, même en quantité réduite, provoque une séparation de phases similaire à celle observée avec ce solvant pur.

Électrofilage de complexes de polymères

Ce travail a permis de démontrer que l’électrofilage, ainsi que l’électronébulisation, sont des méthodes faciles et efficaces de préparation de complexes entre des polymères et des petites molécules. En effet, la plupart des méthodes de préparation de complexes donnent des mélanges inhomogènes à cause de la cristallisation cinétiquement favorisée des petites molécules. Or, un mélange inhomogène peut être très difficile à caractériser. Dans ce travail, l’électrofilage a été utilisé pour la première fois avec succès pour obtenir des nanofils de complexe entre le poly(oxyde d’éthylène) (PEO) et le NaSCN (PEO-NaSCN) ainsi qu’entre le PEO et l’hydroquinone. L’électronébulisation a été utilisée pour obtenir du complexe entre la polycaprolactone (PCL) et l’urée. L’électrofilage n’était pas possible pour le système PCL-urée parce que la solubilité n’était pas suffisante pour atteindre la viscosité minimale requise pour l’électrofilage. L’électronébulisation peut donc complémenter l’électrofilage et rendre la technique applicable à encore plus de systèmes. Les systèmes ont été caractérisés par spectroscopie infrarouge (FT-IR), par diffraction de rayons X (XRD), par calorimétrie différentielle à balayage (DSC) et par microscopies optique et électronique à balayage.

Études structurales par résonance magnétique nucléaire du ribozyme VS de Neurospora

Le ribozyme VS de Neurospora catalyse des réactions de clivage et de ligation d’un lien phosphodiester spécifique essentielles à son cycle de réplication. Il est formé de six régions hélicales (I à VI), qui se divisent en deux domaines, soit le substrat (SLI) et le domaine catalytique (tiges II à VI). Ce dernier comprend deux jonctions à trois voies qui permettent de reconnaître le substrat en tige-boucle de façon spécifique. Ce mode de reconnaissance unique pourrait être exploité pour cibler des ARN repliés pour diverses applications. Bien que le ribozyme VS ait été caractérisé biochimiquement de façon exhaustive, aucune structure à haute résolution du ribozyme complet n’a encore été publiée, ce qui limite la compréhension des mécanismes inhérents à son fonctionnement. Précédemment, une approche de divide-and-conquer a été initiée afin d’étudier la structure des sous-domaines importants du ribozyme VS par spectroscopie de résonance magnétique nucléaire (RMN) mais doit être complétée. Dans le cadre de cette thèse, les structures de la boucle A730 et des jonctions III-IV-V et II-III-VI ont été déterminées par spectroscopie RMN hétéronucléaire. De plus, une approche de spectroscopie RMN a été développée pour la localisation des ions divalents, tandis que diverses approches de marquage isotopique ont été implémentées pour l’étude d’ARN de plus grandes tailles. Les structures RMN de la boucle A730 et des deux jonctions à trois voies révèlent que ces sous-domaines sont bien définis, qu’ils sont formés de plusieurs éléments structuraux récurrents (U-turn, S-turn, triplets de bases et empilement coaxial) et qu’ils contiennent plusieurs sites de liaison de métaux. En outre, un modèle du site actif du ribozyme VS a été construit sur la base des similarités identifiées entre les sites actifs des ribozymes VS et hairpin. Dans l’ensemble, ces études contribuent de façon significative à la compréhension de l’architecture globale du ribozyme VS. De plus, elles permettront de construire un modèle à haute résolution du ribozyme VS tout en favorisant de futures études d’ingénierie.

Compact Wideband Antenna for 2.4 GHz WLAN Applications

A novel compact wideband antenna for wireless local area network (WLAN) applications in the 2.4 GHz band are presented. The proposed low profile antenna of dimensions 15 x 14.5 x 1.6 mm offers 18.6% bandwidth and an average gain of~5 dBi. The antenna can be excited directly using a 50 coaxial probe

Compact Planar Multiband Antenna for GPS, DCS, 2.4/5.8 GHz WLAN Applications

A compact single –feed multiband planar antenna configuration Suitable for GPS, DCS. 2.4/5.8 GHz WLAN applications are presented. The antenna has dimensions 38 x 3 x 1.6 mm and offers good radiation and reflection characteristics in the above frequency bands. The antenna has a simple geometry and can be easily fed using a 50 coaxial probe

Compact Planar Multiband Antenna for GPS,DCS 2.4/5.8 GHz WLAN Applications

A compact single - feed muttiband planar antenna configuration suitable for GPS, DCS. 2.4/5.8 GHz WLAN applications is presented. The antenna has dimensions 38 x 3 x 1.6 mm and offers good radiation and reflection characteristics in the above frequency bands. The antenna has a simple geometry and can be easily fed using a 50 coaxial probe.

Compact Wideband Antenna for 2.4 GHz WLAN Applications

A novel compact wideband antenna for wireless local area network (WLAN) applications in the 2.4 GHz band is presented. The proposed low profile antenna of dimensions 15 x 14.5 x 1.6 mm offers 18.6% bandwidth and an average gain of -5 dBi. The antenna can be excited directly using a 50 coaxial probe