Altruism, Trade Policy, and the Optimality of Foreign Aid

There are many studies in the literature that deal with the welfare effects of income transfers between nations in a general equilibrium setting. An important impetus for this extensive literature was the demonstration of the transfer paradox; that the donor country could actually gain from a transfer of income to another, and that the recipient could lose as a result of the gift. The reason for this paradoxical result is that the transfer gives rise to a terms-of-trade effect that may be especially beneficial to the donor and detrimental to the recipient. Subsequently, many papers have established conditions under which this paradox will or will not occur. Early work by Samuelson (1954) was followed by demonstrations of paradoxes by Gale (1974), Ohyama (1974), Brecher and Bhagwati (1982) and Bhagwati, Brecher and Hatta 1983, 1985, and Dixit (1983)) among others.1 More recently, many studies have examined whether or not foreign aid — tied and untied — can be welfare improving for both the donor and the recipient (see, for example, Turunen-Red and Woodland (1988), Kemp and Wong (1993), Schweinberger (1990), Hatzipanayotou and Michael (1995), Lahiri and Raimondos-Moller 1995, 1997, Djajić, Lahiri and Raimondos-Møller 1996a, 1996b, and Lahiri, Raimondos-Møller, Wong and Woodland 1997.2

Competition for aid and trade policy

This paper considers the optimal allocation of a given amount of foreign aid between two recipient countries. It is shown that, given consumer preferences, a country following a more restrictive trade policy would receive a smaller share of the aid if the donor country maximises its own welfare in allocating aid. If, on the other hand, the donor country allocates aid in order to maximize the sum of the welfare of the two recipient countries, the result is just the opposite. Finally, we analyze the situation where the recipient countries compete with each other for the given amount of aid. It is shown that this competition tends to lower the level of optimal tariffs in the recipient countries.

Correcting trade distortions in a small open economy

This paper considers the second-best strategy of correcting a wide variety of trade distortions in a small open economy with perfect competition in all markets. Using the tools of duality, we obtain some general properties of the structure and the levels of the optimal taxlsubsidy rates. The paper also analyzes the welfare effects of unilateral piecemeal trade policy reforms when some of the quota distortions—imposed by the foreign countries—are unalterable. It is shown that the merits of unilateral trade policy reforms that are emphasized in the literature crucially depend on the absence of unalterable foreign imposed quotas.

The transfer problem and the intertemporal terms of trade

In this paper the effects of a transfer on the intertemporal terms of trade are examined in the context of a simple two-country, two-period model. When intertemporal trade occurs because the two economies have different rates of time preference, a transfer improves the terms of trade of the paying country. Alternatively, when trade occurs owing to international differences in the endowments of goods over the two periods, the effect of a transfer depends on (a) the relationship between the interest rate and the rates of time preference of the two countries and (b) the relationship between their elasticities of intertemporal consumption substitution.

Welfare effects of aid under quantitative trade restrictions

The paper examines the effects of tied-aid on the welfare of both the donor and the recipient countries. We depart from the previous literature by assuming preexistence of quantitative trade distortions. To mitigate these distortions the donor country provides aid that is tied to the rationed good. Conditions for the presence of the transfer paradox and of the enrichment of both countries are derived and interpreted under the stability of the system. Furthermore, we show that whereas untied aid cannot increase global welfare, tied-aid unambiguously does so.

Ion exchange of sodium chloride and sodium bicarbonate solutions using strong acid cation resins in relation to coal seam water treatment

Coal seam gas production has resulted in the production of large volumes of associated water which contains dissolved salts dominated by sodium chloride and sodium bicarbonate. Ion exchange using synthetic resins has been proposed as a method for desalination of coal seam water to make it suitable for various beneficial reuse options. This study investigated the behaviour of solutions of sodium chloride and sodium bicarbonate with respect to exchange with Lanxess S108H strong acid cation (SAC) resin. Equilibrium isotherms were created for solutions of NaCl and NaHCO3 and an actual sample of coal seam water from the Surat Basin in southern Queensland. The exchange of sodium ions arising from sodium bicarbonate was found to be considerably more favourable than exchange of sodium ions from sodium chloride solutions. This latter behaviour was attributed to the secondary decomposition of bicarbonate species under acidic conditions which resulted in the evolution of carbon dioxide and formation of water. The isotherm profiles could not be satisfactorily fitted by a single isotherm model such as the Langmuir expression. Instead, two Langmuir equations had to be simultaneously applied in order to fit the sections of the isotherm attributable to sodium ion exchange from sodium bicarbonate and sodium chloride. The shape of the isotherm profile was dependent upon the ratio of sodium chloride to sodium bicarbonate in solution and there was a high degree of correlation between simulated and actual coal seam water solutions.

Behaviour of natural zeolites used for the treatment of simulated and actual coal seam gas water

Coal seam gas operations produce significant quantities of associated water which often require demineralization. Ion exchange with natural zeolites has been proposed as a possible approach. The interaction of natural zeolites with solutions of sodium chloride and sodium bicarbonate in addition to coal seam gas water is not clear. Hence, we investigated ion exchange kinetics, equilibrium, and column behaviour of an Australian natural zeolite. Kinetic tests suggested that the pseudo first order equation best simulated the data. Intraparticle diffusion was part of the rate limiting step and more than one diffusion process controlled the overall rate of sodium ion uptake. Using a constant mass of zeolite and variable concentration of either sodium chloride or sodium bicarbonate resulted in a convex isotherm which was fitted by a Langmuir model. However, using a variable mass of zeolite and constant concentration of sodium ions revealed that the exchange of sodium ions with the zeolite surface sites was in fact unfavourable. Sodium ion exchange from bicarbonate solutions (10.3 g Na/kg zeolite) was preferred relative to exchange from sodium chloride solutions (6.4 g Na/kg zeolite). The formation of calcium carbonate species was proposed to explain the observed behaviour. Column studies of coal seam gas water showed that natural zeolite had limited ability to reduce the concentration of sodium ions (loading 2.1 g Na/kg zeolite) with rapid breakthrough observed. It was concluded that natural zeolites may not be suitable for the removal of cations from coal seam gas water without improvement of their physical properties.

Analyzing changes in macro-level drivers of country-specific emissions : The role of consumption, technology and trade

Industrial ecology is an important field of sustainability science. It can be applied to study environmental problems in a policy relevant manner. Industrial ecology uses ecosystem analogy; it aims at closing the loop of materials and substances and at the same time reducing resource consumption and environmental emissions. Emissions from human activities are related to human interference in material cycles. Carbon (C), nitrogen (N) and phosphorus (P) are essential elements for all living organisms, but in excess have negative environmental impacts, such as climate change (CO2, CH4 N2O), acidification (NOx) and eutrophication (N, P). Several indirect macro-level drivers affect emissions change. Population and affluence (GDP/capita) often act as upward drivers for emissions. Technology, as emissions per service used, and consumption, as economic intensity of use, may act as drivers resulting in a reduction in emissions. In addition, the development of country-specific emissions is affected by international trade. The aim of this study was to analyse changes in emissions as affected by macro-level drivers in different European case studies. ImPACT decomposition analysis (IPAT identity) was applied as a method in papers I III. The macro-level perspective was applied to evaluate CO2 emission reduction targets (paper II) and the sharing of greenhouse gas emission reduction targets (paper IV) in the European Union (EU27) up to the year 2020. Data for the study were mainly gathered from official statistics. In all cases, the results were discussed from an environmental policy perspective. The development of nitrogen oxide (NOx) emissions was analysed in the Finnish energy sector during a long time period, 1950 2003 (paper I). Finnish emissions of NOx began to decrease in the 1980s as the progress in technology in terms of NOx/energy curbed the impact of the growth in affluence and population. Carbon dioxide (CO2) emissions related to energy use during 1993 2004 (paper II) were analysed by country and region within the European Union. Considering energy-based CO2 emissions in the European Union, dematerialization and decarbonisation did occur, but not sufficiently to offset population growth and the rapidly increasing affluence during 1993 2004. The development of nitrogen and phosphorus load from aquaculture in relation to salmonid consumption in Finland during 1980 2007 was examined, including international trade in the analysis (paper III). A regional environmental issue, eutrophication of the Baltic Sea, and a marginal, yet locally important source of nutrients was used as a case. Nutrient emissions from Finnish aquaculture decreased from the 1990s onwards: although population, affluence and salmonid consumption steadily increased, aquaculture technology improved and the relative share of imported salmonids increased. According to the sustainability challenge in industrial ecology, the environmental impact of the growing population size and affluence should be compensated by improvements in technology (emissions/service used) and with dematerialisation. In the studied cases, the emission intensity of energy production could be lowered for NOx by cleaning the exhaust gases. Reorganization of the structure of energy production as well as technological innovations will be essential in lowering the emissions of both CO2 and NOx. Regarding the intensity of energy use, making the combustion of fuels more efficient and reducing energy use are essential. In reducing nutrient emissions from Finnish aquaculture to the Baltic Sea (paper III) through technology, limits of biological and physical properties of cultured fish, among others, will eventually be faced. Regarding consumption, salmonids are preferred to many other protein sources. Regarding trade, increasing the proportion of imports will outsource the impacts. Besides improving technology and dematerialization, other viewpoints may also be needed. Reducing the total amount of nutrients cycling in energy systems and eventually contributing to NOx emissions needs to be emphasized. Considering aquaculture emissions, nutrient cycles can be partly closed through using local fish as feed replacing imported feed. In particular, the reduction of CO2 emissions in the future is a very challenging task when considering the necessary rates of dematerialisation and decarbonisation (paper II). Climate change mitigation may have to focus on other greenhouse gases than CO2 and on the potential role of biomass as a carbon sink, among others. The global population is growing and scaling up the environmental impact. Population issues and growing affluence must be considered when discussing emission reductions. Climate policy has only very recently had an influence on emissions, and strong actions are now called for climate change mitigation. Environmental policies in general must cover all the regions related to production and impacts in order to avoid outsourcing of emissions and leakage effects. The macro-level drivers affecting changes in emissions can be identified with the ImPACT framework. Statistics for generally known macro-indicators are currently relatively well available for different countries, and the method is transparent. In the papers included in this study, a similar method was successfully applied in different types of case studies. Using transparent macro-level figures and a simple top-down approach are also appropriate in evaluating and setting international emission reduction targets, as demonstrated in papers II and IV. The projected rates of population and affluence growth are especially worth consideration in setting targets. However, sensitivities in calculations must be carefully acknowledged. In the basic form of the ImPACT model, the economic intensity of consumption and emission intensity of use are included. In seeking to examine consumption but also international trade in more detail, imports were included in paper III. This example demonstrates well how outsourcing of production influences domestic emissions. Country-specific production-based emissions have often been used in similar decomposition analyses. Nevertheless, trade-related issues must not be ignored.

BDST modelling of sodium ion exchange column behaviour with strong acid cation resin in relation to coal seam water treatment

Reverse osmosis is the dominant technology utilized for desalination of saline water produced during the extraction of coal seam gas. Alternatively, ion exchange is of interest due to potential cost advantages. However, there is limited information regarding the column performance of strong acid cation resin for removal of sodium ions from both model and actual coal seam water samples. In particular, the impact of bed depth, flow rate, and regeneration was not clear. Consequently, this study applied Bed Depth Service Time (BDST) models to reveal that increasing sodium ion concentration and flow rates diminished the time required for breakthrough to occur. The loading of sodium ions on fresh resin was calculated to be ca. 71.1 g Na/kg resin. Difficulties in regeneration of the resin using hydrochloric acid solutions were discovered, with 86% recovery of exchange sites observed. The maximum concentration of sodium ions in the regenerant brine was found to be 47,400 mg/L under the conditions employed. The volume of regenerant waste formed was 6.2% of the total volume of water treated. A coal seam water sample was found to load the resin with only 53.5 g Na/kg resin, which was consistent with not only the co-presence of more favoured ions such as calcium, magnesium, barium and strontium, but also inefficient regeneration of the resin prior to the coal seam water test.

Conference Report: International Institute of Fisheries Economics and Trade Conference (IIFET) 2014

The 17th Biennial Conference of the International Institute of Fisheries Economics and Trade (IIFET) was held in Brisbane in July 2014. IIFET is the principal international association for fisheries economics, and the biennial conference is an opportunity for the best fisheries economists in the world to meet and share their ideas. The conference was organised by CSIRO, QUT, UTAS, University of Adelaide and KG Kailis Ltd. This is the first time the conference has been held in Australia. The conferences covered a wide range of topics of relevance to Australia. These included studies of fishery management systems around the world, identified key issues in aquaculture and marine biodiversity conservation, and provided a forum for new modelling and theoretical approaches to analysing fisheries problems to be presented. The theme of the conference was Towards Ecosystem Based Management of Fisheries: What Role can Economics Play? Several sessions were dedicated to modelling socio-ecological systems, and two keynote speakers were invited to present the latest thinking in the area. In this report, the key features of the conference are outlined.

Optimising the operational energy efficiency of an open-pit coal mine system

This thesis investigates factors that impact the energy efficiency of a mining operation. An innovative mathematical framework and solution approach are developed to model, solve and analyse an open-pit coal mine. A case study in South East Queensland is investigated to validate the approach and explore the opportunities for using it to aid long, medium and short term decision makers.