Police and Jewish demonstration in Crown Heights

General note: Title and date provided by Bettye Lane.

Markers for seedling and adult plant crown rot resistance in four partially resistant bread wheat sources

QTL identified for seedling and adult plant crown rot resistance in four partially resistant hexaploid wheat sources. PCR-based markers identified for use in marker-assisted selection. Crown rot, caused by Fusarium pseudograminearum, is an important disease of wheat in many wheat-growing regions globally. Complete resistance to infection by F. pseudograminearum has not been observed in a wheat host, but germplasm with partial resistance to this pathogen has been identified. The partially resistant wheat hexaploid germplasm sources 2-49, Sunco, IRN497 and CPI133817 were investigated in both seedling and adult plant field trials to identify markers associated with the resistance which could be used in marker-assisted selection programs. Thirteen different quantitative trait loci (QTL) conditioning crown rot resistance were identified in the four different sources. Some QTL were only observed in seedling trials whereas others appeared to be adult plant specific. For example while the QTL on chromosomes 1AS, 1BS, and 4BS contributed by 2-49 and on 2BS contributed by Sunco were detected in both seedling and field trials, the QTL on 1DL present in 2-49 and the QTL on 3BL in IRN497 were only detected in seedling trials. Genetic correlations between field trials of the same population were strong, as were correlations between seedling trials of the same population. Low to moderate correlations were observed between seedling and field trials. Flanking markers, most of which are less than 10 cM apart, have now been identified for each of the regions associated with crown rot resistance.

Research into crown rot and wilt diseases of strawberries in Queensland

Plant losses due to fungal diseases in strawberry (Fragaria × ananassa Duch.) can potentially cause total loss of production. Three fungal pathogens, Fusarium oxysporum f. sp. fragariae, Colletotrichum gloeosporioides and Macrophomina phaseolina, cause similar crown rot and wilt symptoms in strawberries in Queensland. Since the withdrawal of methyl bromide in 2005, no effective chemical control of any of the three pathogens has been available. This study aims at identifying sources of plant genetic resistance that can be used in the breeding program to develop resistant cultivars for use as part of an integrated disease management plan in commercial strawberry production. Results from glasshouse pathogenicity and screening trials on the three pathogens showed that when breeding for resistance against a pathogen, resistance to other pathogens also needs to be considered, e.g., cultivar 'Festival' is resistant to F. oxysporum f. sp. fragariae, but is highly susceptible to C. gloeosporioides. The cultivars 'Earlisweet', 'Kabarla' and 'Phenomenal', two seedling clones and four DAFF breeding lines were resistant to C. gloeosporioides. Cultivar 'Suncoast Delight' showed the most promising level of resistance to M. phaseolina. These cultivars, breeding lines and seedling selections have been made available for incorporation into the crossing program to support the Queensland strawberry breeding program.

Arthropods associated with the crown of Mauritia flexuosa (Arecaceae) palm trees in three different environments from Brazilian Cerrado

Artrópodos associados à copa de árvores, principalmente palmeiras, são pouco conhecidos no Cerrado. Para descrever a estrutura da comunidade de artrópodos à copa de Mauritia flexuosa (Arecaceae) foram amostradas 150 palmeiras em seis veredas” do Distrito Federal, de áreas silvestres, rurais e periurbanas na estação chuvosa. Os artrópodos presentes nos ninhos abandonados de aves, refúgios de mamíferos, folhas e matéria orgânica foram coletados manualmente, fixados em etanol 70% e separados em ordem, família, morfoespécie e guildas alimentares. As características das palmeiras medidas foram altura da estipe, diâmetro da copa, número de folhas e de ninhos de aves nas palmeiras. Foram coletados 3.862 indivíduos, pertencentes a 15 ordens, 45 famílias e 135 morfoespécies. As ordens mais abundantes foram Coleoptera (28,6%), Blattodea (21,8%), Collembola (11,4%) e Hemiptera (10,2%). As famílias Blaberidae, Tenebrionidae, Entomobryidae, Reduviidae, Oniscidae, Staphylinidae, Carabidae e Formicidae representaram 82,1% de todos os indivíduos coletados. A maioria das morfoespécies foi pouco abundante, 71 (52,6%) apresentaram uma abundância média igual ou menor que 1 indivíduo/palmeira. Coleoptera compreendeu o maior número de morfoespécies (43,7%) seguida de Araneae (20,0%). A análise das guildas alimentares mostrou prevalência de predadores e hematófagos (36,0%). A riqueza e a abundância de artrópodos foram menores no ambiente periurbano. O número de ninhos de aves apresentou correlação positiva com abundância e riqueza, o que não ocorreu com as medidas das palmeiras. A importância de M. flexuosa para a manutenção da artropodofauna nas “veredas” no bioma Cerrado é discutida. _______________________________________________________________________________________ ABSTRACT

Influence of implant-abutment angulations and crown material on stress distribution on central incisor: a 3D FEA

Aim: To investigate the effect of implant-abutment angulation and crown material on stress distribution of central incisors. Finite element method was used to simulate the clinical situation of a maxillary right central incisor restored by two different implant-abutment angulations, 15° and 25°, using two different crown materials (IPS E-Max CAD and zirconia). Methods: Two 3D finite element models were specially prepared for this research simulating the abutment angulations. Commercial engineering CAD/CAM package was used to model crown, implant abutment complex and bone (cortical and spongy) in 3D. Linear static analysis was performed by applying a 178 N oblique load. The obtained results were compared with former experimental results. Results: Implant Von Mises stress level was negligibly changed with increasing abutment angulation. The abutment with higher angulation is mechanically weaker and expected to fail at lower loading in comparison with the steeper one. Similarly, screw used with abutment angulation of 25° will fail at lower (about one-third) load value the failure load of similar screw used with abutment angulated by 15°. Conclusions: Bone (cortical and spongy) is insensitive to crown material. Increasing abutment angulation from 15° to 25°, increases stress on cortical bone by about 20% and reduces it by about 12% on spongy bone. Crown fracture resistance is dramatically reduced by increasing abutment angulation. Zirconia crown showed better performance than E-Max one.

New dimeric supramolecular structure of mixed (phthalocyaninato)(porphyrinato)-europium(III) sandwiches : preparation and spectroscopic characteristics

The mixed double-decker Eu\[Pc(15C5)4](TPP) (1) was obtained by base-catalysed tetramerisation of 4,5-dicyanobenzo-15-crown-5 using the half-sandwich complex Eu(TPP)(acac) (acac = acetylacetonate), generated in situ, as the template. For comparative studies, the mixed triple-decker complexes Eu2\[Pc(15C5)4](TPP)2 (2) and Eu2\[Pc(15C5)4]2(TPP) (3) were also synthesised by the raise-by-one-story method. These mixed ring sandwich complexes were characterised by various spectroscopic methods. Up to four one-electron oxidations and two one-electron reductions were revealed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). As shown by electronic absorption and infrared spectroscopy, supramolecular dimers (SM1 and SM3) were formed from the corresponding double-decker 1 and triple-decker 3 in the presence of potassium ions in MeOH/CHCl3.

Comparison of 3D finite element analysis derived stiffness and BMD to determine the failure load of the excised proximal femur

Introduction: Bone mineral density (BMD) is currently the preferred surrogate for bone strength in clinical practice. Finite element analysis (FEA) is a computer simulation technique that can predict the deformation of a structure when a load is applied, providing a measure of stiffness (Nmm−1). Finite element analysis of X-ray images (3D-FEXI) is a FEA technique whose analysis is derived froma single 2D radiographic image. Methods: 18 excised human femora had previously been quantitative computed tomography scanned, from which 2D BMD-equivalent radiographic images were derived, and mechanically tested to failure in a stance-loading configuration. A 3D proximal femur shape was generated from each 2D radiographic image and used to construct 3D-FEA models. Results: The coefficient of determination (R2%) to predict failure load was 54.5% for BMD and 80.4% for 3D-FEXI. Conclusions: This ex vivo study demonstrates that 3D-FEXI derived from a conventional 2D radiographic image has the potential to significantly increase the accuracy of failure load assessment of the proximal femur compared with that currently achieved with BMD. This approach may be readily extended to routine clinical BMD images derived by dual energy X-ray absorptiometry. Crown Copyright © 2009 Published by Elsevier Ltd on behalf of IPEM. All rights reserved

An investigation of cross-cultural differences in binge-drinking perceptions and behaviours

This paper examines the variance in binge-drinking attitudes and behaviours between university student cohorts from Western and Eastern countries who reside in Australia. In particular, we investigate the impact of social influence on these consumer responses. An online survey resulted in 190 useable responses from university students at three different Australian universities. The results show that students from Western countries consume alcohol at higher levels and demonstrate more ‘approach’ behaviours towards binge-drinking, whereas students from Eastern countries demonstrate more ‘avoid’ behaviours. Social distancing from drunk or story-telling people is evident as students from Eastern countries while students from Western countries were more likely to indulge in story-telling and either ignored or encouraged surrounding people who were drunk.

Early land grants and reservations : Any lessons from the Queensland experience for the sustainability challenge to land ownership

Environmentalists have called for a new property paradigm premised on the idea of land ownership as a delegated responsibility to manage land and resources for the public benefit. An examination of Crown freehold grants from the beginnings of settlement until the 1890s in Queensland shows that fee simple titles were granted subject to express conditions and reservations designed to reserve useful natural resources to the Crown, and to promote public purposes. Over time, legislative regulation of landowner’s rights rendered obsolete the use of express conditions and reservations in grants. One result of this change was that the inherently limited nature of fee simple ownership, and the communal obligations to which it is subject, are less transparent than in colonial times.

The stimulation of healing within a rat calvarial defect by mPCL–TCP/collagen scaffolds loaded with rhBMP-2

Bone morphogenetic proteins (BMPs) have been widely investigated for their clinical use in bone repair and it is known that a suitable carrier matrix to deliver them is essential for optimal bone regeneration within a specific defect site. Fused deposited modeling (FDM) allows for the fabrication of medical grade poly 3-caprolactone/tricalcium phosphate (mPCL–TCP) scaffolds with high reproducibility and tailor designed dimensions. Here we loaded FDM fabricated mPCL–TCP/collagen scaffolds with 5 mg recombinant human (rh)BMP-2 and evaluated bone healing within a rat calvarial critical-sized defect. Using a comprehensive approach, this study assessed the newly regenerated bone employing microcomputed tomography (mCT), histology/histomorphometry, and mechanical assessments. By 15 weeks, mPCL–TCP/collagen/rhBMP-2 defects exhibited complete healing of the calvarium whereas the non- BMP-2-loaded scaffolds showed significant less bone ingrowth, as confirmed by mCT. Histomorphometry revealed significantly increased bone healing amongst the rhBMP-2 groups compared to non-treated scaffolds at 4 and 15 weeks, although the % BV/TV did not indicate complete mineralisation of the entire defect site. Hence, our study confirms that it is important to combine microCt and histomorphometry to be able to study bone regeneration comprehensively in 3D. A significant up-regulation of the osteogenic proteins, type I collagen and osteocalcin, was evident at both time points in rhBMP-2 groups. Although mineral apposition rates at 15 weeks were statistically equivalent amongst treatment groups, microcompression and push-out strengths indicated superior bone quality at 15 weeks for defects treated with mPCL–TCP/collagen/rhBMP-2. Consistently over all modalities, the progression of healing was from empty defect < mPCL–TCP/collagen < mPCL–TCP/collagen/rhBMP-2, providing substantiating data to support the hypothesis that the release of rhBMP-2 from FDM-created mPCL–TCP/collagen scaffolds is a clinically relevant approach to repair and regenerate critically-sized craniofacial bone defects. Crown Copyright 2008 Published by Elsevier Ltd. All rights reserved.

Millwork

An exhibition of drawing and sculpture that extends the artist's process of self-portraiture, applying the historical form of the portrait roundel to the crown of the head as an exclusive subject matter.

Report to the Government 2.0 Taskforce : Project 4 - Copyright Law and Intellectual Property

This report is the primary output of Project 4: Copyright and Intellectual Property, the aim of which was to produce a report considering how greater access to and use of government information could be achieved within the scope of the current copyright law. In our submission for Project 4, we undertook to address: •the policy rationales underlying copyright and how they apply in the context of materials owned, held and used by government; • the recommendations of the Copyright Law Review Committee (CLRC) in its 2005 report on Crown copyright; • the legislative and regulatory barriers to information sharing in key domains, including where legal impediments such as copyright have been relied upon (whether rightly or wrongly) to justify a refusal to provide access to government data; • copyright licensing models appropriate to government materials and examples of licensing initiatives in Australia and other relevant jurisdictions; and • issues specific to the galleries, libraries, archives and museums (“GLAM”) sector, including management of copyright in legacy materials and “orphan” works. In addressing these areas, we analysed the submissions received in response to the Government 2.0 Taskforce Issues Paper, consulted with members of the Task Force as well as several key stakeholders and considered the comments posted on the Task Force’s blog. This Project Report sets out our findings on the above issues. It puts forward recommendations for consideration by the Government 2.0 Task Force on steps that can be taken to ensure that copyright and intellectual property promote access to and use of government information.

The role of fluid and emotional intelligence in malingering

The purpose of the present study was to examine the role of fluid (gf), social (SI) and emotional intelligence (EI) in faking the Beck Depression Inventory (2nd ed., BDI-II). Twenty-two students and 26 non-students completed Raven’s Advanced Progressive Matrices (APM), a social insight test, the Schutte et al. self-report EI scale, and the BDI-II under honest and faking instructions. Results were consistent with a new model of successful faking, in which a participant’s original response must be manipulated into a strategic response, which must match diagnostic criteria. As hypothesised, the BDI-II could be faked, and gf was not related to faking ability. Counter to expectations, however, SI and EI were not related to faking ability. A second study explored why EI failed to facilitate faking. Forty-nine students and 50 non-students completed the EI measure, the Marlowe-Crown Scale and the Levenson et al. Psychopathy Scale. As hypothesised, EI was negatively correlated with psychopathy, but EI showed no relationship with socially desirable responding. It was concluded that in the first experiment, high-EI people did fake effectively, but high-psychopathy people (who had low EI) were also faking effectively, resulting in a distribution that showed no advantage to high EI individuals.